I recently tried to upload a recovery but the attempt was a problem. The phone starts up, it shows the logo of tracer and reboots the phone. I can enter into fastboot and upload Tracer software but i have problem. fastboot flash system, chache, boot, userdata was succesful but when I want to flash recovery on the phone displays the error "partition recovery not use flash". What can I do? This is very important. My model phone is Tracer oxygen gs3 Plz help me, thanks!
Hi,
I see you already asked this in the Android Q&A section, which is where I would tell you to ask also. So there's nothing more we can do for you here. We only help navigate the site, we don't do support here.
Be sure the recovery is for your exact device, or it won't work and could cause issues. I see nothing relevant on XDA about recovery for your device.
Good luck!
Related
I know that my phone has no android OS because this happens before, It wont boot up and you need to enter recovery mode and when I chose reboot it says that it has no android OS and when you reboot it it was stuck in boot image. I need to install a new rom that has a android OS. And It Works.
One time I Factory Reset my phone on settings . Usually it will enter in TWRP and make a reset BUT it was stuck on the logo of TWRP and cannot enter into recovery anymore. I remove the battery and try to power it on. It was stuck in boot image. I remember that this happens before so I try to enter recovery mode. But I was stuck again in the logo of TWRP. What should I do? Please help....
My TWRP recovery was from this http://forum.xda-developers.com/showthread.php?t=2660014
cedcose said:
I know that my phone has no android OS because this happens before, It wont boot up and you need to enter recovery mode and when I chose reboot it says that it has no android OS and when you reboot it it was stuck in boot image. I need to install a new rom that has a android OS. And It Works.
One time I Factory Reset my phone on settings . Usually it will enter in TWRP and make a reset BUT it was stuck on the logo of TWRP and cannot enter into recovery anymore. I remove the battery and try to power it on. It was stuck in boot image. I remember that this happens before so I try to enter recovery mode. But I was stuck again in the logo of TWRP. What should I do? Please help....
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Cherry Mobile Fuze Q390 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you.
I also see a thread titled "All About Cherry Mobile Fuze (Q390)" at http://forum.xda-developers.com/showthread.php?t=2660014 that might be worth reading.
Good Luck!
so. i updated my phone from cm 12 to cm 13 and
i got into twrp recovery and installed the the downloaded file.
now the phone is in bootloop. i tried to flash twrp recovery again. but it says mismatched partition size(recovery).
if i get into fastboot and select recovery, i get the teamwin logo and thr phone goes into the bootloop again. same thing happens even if i factory reset it(through fastboot)
please help me
thanks
Hello,
Welcome to XDA.
To further assist you, please post your device model number and I will guide you to where you may find your answers. Thank you.
Register an XDA account to post and reply in the forums.
I rooted my phone and it worked. But after trying to update it to the newest software, it restarted to the recovery mode. Whenever I try to reboot the phone it always boot me in the recovery mode. I tried flashing the stock ROM but I think the reason why it's not working is that the PC cannot recognize the phone. I've seen an article saying that, that it is caused by an instruction in the misc.img file that somehow doesn't get cleared when I'm trying to reboot the system. Please help. Thanks in advance
Hi,
Thanks for using XDA assist.
Please tell us what phone you are using so you can be directed to the appropriate forum.
gsstudios
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Hi mr__gutz
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
mr__gutz said:
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Click to expand...
Click to collapse
Was trying to flash a custom recovery (cmw) using mtk dd tool, adb as I have seen from the tutorial. I followed the instructions but when my device restarted it goes into bootloop. Pressed the power button+volume up it takes me to the screen where i will choose recovery, fast boot or normal. When I selected the recovery it doesn't into it and just power offs instead same as to fastboot. Normal reboot just takes me to bootloop again.
Device: Meetu m11(I guess) but when i bought it its Lenovo
Aliyun OS
MTK6752
Android 4.4
How will I get past the bootloop? Also I can't find any stock rrecovery . I can't flash anything. Hope you can help me.
Thanks!
XDA Visitor said:
Was trying to flash a custom recovery (cmw) using mtk dd tool, adb as I have seen from the tutorial. I followed the instructions but when my device restarted it goes into bootloop. Pressed the power button+volume up it takes me to the screen where i will choose recovery, fast boot or normal. When I selected the recovery it doesn't into it and just power offs instead same as to fastboot. Normal reboot just takes me to bootloop again.
Device: Meetu m11(I guess) but when i bought it its Lenovo
Aliyun OS
MTK6752
Android 4.4
How will I get past the bootloop? Also I can't find any stock rrecovery . I can't flash anything. Hope you can help me.
Thanks!
Click to expand...
Click to collapse
Hello,
Please register for XDA account to post and reply in the forums.
Also, you may try posting your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.