[Completed] Doro Liberto 820 (MTK6582) - Recovery Mode - XDA Assist

Would anybody know how to get a Doro Liberto 820 into recovery mode?
My friend's Dads phone is stuck in a boot loop and he asked me to look at it. I'm no expert by any means but I can get by. (normally).
I've used recovery mode lots of times before so its not normally a problem except on this phone.
I've tried the usual combinations involving volume down-home-power volume up-home-power etc... & same again without 'home' but no luck.
I can get into the factory menu but there's nothing in there that's helpful enough to fix a boot loop.
Ive even sent a message to Doro but they don't seem to want to reply.
Any help will be gratefully received.
Thanks
Brian

brianwharf said:
Would anybody know how to get a Doro Liberto 820 into recovery mode?
My friend's Dads phone is stuck in a boot loop and he asked me to look at it. I'm no expert by any means but I can get by. (normally).
I've used recovery mode lots of times before so its not normally a problem except on this phone.
I've tried the usual combinations involving volume down-home-power volume up-home-power etc... & same again without 'home' but no luck.
I can get into the factory menu but there's nothing in there that's helpful enough to fix a boot loop.
Ive even sent a message to Doro but they don't seem to want to reply.
Any help will be gratefully received.
Thanks
Brian
Click to expand...
Click to collapse
Hi,
As there isn't a dedicated forum for your device here try posting your query is in:
> Android Development and Hacking > Android Q&A,Help and Troubleshooting.
You can hopefully find some support there.
Good luck

Related

Venstar2050 boot issue

I got a Venstar2050 off of ebay (Chinese made tablet) I had it a couple of days, and it was sluggish. So I preformed a factory reset on it, I did it through the android OS, within the system settings. It worked, booted fine, until a reset. I now get a "no command" dead android logo. There are no combination of buttons that seems to pull it into a recovery mode. I've read that there is no recovery mode on some Chinese made tablets. If anyone is curious, there are vol+, vol-, a back button, and a power button, on the device. I did some searching for a couple of days and I could not find much info on this tablet (I had a feeling I wouldn't find much), or any way of adding a recovery to a tablet that may not have one. Any help would be great. Thanks in advance.
Hi there!
I searched XDA and found nothing in your device. I will ask a moderator to move your question to our general Q&A section, found here...
http://forum.xda-developers.com/general/help
Otherwise, you could try contacting the manufacturer about flashing original firmware and for the files.
Good luck! ?
Thanks for the reply! I've attempted to find the manufacturer for the device, but the only "venstar" I found in Google, with a legitimate website, didn't appear to be the correct manufacturer.
From my understanding of these Chinese devices, they are mostly all built off of the same motherboard.
I'd also like to add that my device is a 10.1 inch screen. That might make a difference between the motherboards.
if someone has got into recovery mode on a newer Chinese tablet that has the same button layout as mine, I could try the same combination of buttons, or whatever used to do this.
Also, is there a way to force a factory reset through usb to pc using software, like adb?
Has anyone found a way to get into recovery mode on this tablet?
Or any other information on how to fix my issue, maybe some simple things I could try?
I should also mention, I have found a little "reset" button on the tablet. But all it seems to do is just do a basic reset of the tablet. Not a factory reset. I've also tried using that, in a combination of other buttons along with the power button to get into a recovery mode, but nothing seems to work.
HELP !
dropcorn said:
Has anyone found a way to get into recovery mode on this tablet?
Or any other information on how to fix my issue, maybe some simple things I could try?
I should also mention, I have found a little "reset" button on the tablet. But all it seems to do is just do a basic reset of the tablet. Not a factory reset. I've also tried using that, in a combination of other buttons along with the power button to get into a recovery mode, but nothing seems to work.
Click to expand...
Click to collapse
If someone can help me please ! i got the same problem with my Venstar 2050 . it stops after logo ANDROID and i can't to go in recovery mode for to flash another rom ...

[Completed] Phone rebooted, now only boots in Recover boot screen

Phone just randomly shut off after using gps (normally normal) and this time it decided to stay stuck in the recover mode screen. None of the options work. Cant recover, factory reset, nothing useful other than reboot which take me back to same white screen.
So i'm not really sure what my options are as far as possibly data recovery. I tried using the windroid but it only detects under fastboot mode and doesn't seem very useful. I tried reflashing the recovery img but didn't seem to do anything.
HTC Amaze
Hi!
To be clear, it's the Amaze 4g? Since you are trying to recover data.... You will need to ask here. Flashing to stock is probably the answer. But to recover data... Better ask in your device section about that...
>HTC Amaze 4G>Amaze 4G Q&A, Help & Troubleshooting
Good luck!
ive posted in Amaze section but haven't gotten any replies... Currently i just need to know if theres a way to flash is without being able to enable usb debug? I tried using a stock rom and it worked for abour 15-20 minutes then locked up and rebooted itself back to bootloader and haven't been able to get it back since. The phone just stops after verifying the rom and doesn't ask to install it. I can only assume it's not the right one? but doesn't make sense since it's the same one i used the previous time and it did install
XDA Assist is only here to provide direction around the site. It is not for support. You'll just have to be patient. You've posted in the correct section for your device and that's all you can do I'm afraid.

[Completed] boot loop on the blu vivo air! help!

So the phone is not mine, it's my sister's phone, it is not rooted or anything, just a few days ago it rebooted itself and has been boot looping since, I really don't know what to do to fox it, the only things I thought of doing was to hold the power button and the volume up and down for a few seconds to take me to the recovery mode but it doesn't let me and yes I tried the two combos independently, searching a little I've found a few things, and they are that the phone might be soft bricked, and it tells me to download the android sdk something about cmw recovery but to be honest I'm not familiar with any of those things, any help would be greatly appreciated, I hope the info I provided is enough to get me some help.
XDA Visitor said:
So the phone is not mine, it's my sister's phone, it is not rooted or anything, just a few days ago it rebooted itself and has been boot looping since, I really don't know what to do to fox it, the only things I thought of doing was to hold the power button and the volume up and down for a few seconds to take me to the recovery mode but it doesn't let me and yes I tried the two combos independently, searching a little I've found a few things, and they are that the phone might be soft bricked, and it tells me to download the android sdk something about cmw recovery but to be honest I'm not familiar with any of those things, any help would be greatly appreciated, I hope the info I provided is enough to get me some help.
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Because there hasn't been any modifications done to this device, I would avoid at all costs any custom work (like CWM recovery), because your warranty (if your sister has one) would still be intact. Taking it back to the provider/seller is still an option here.
If you can still access what is called fastboot (if this device does have one, sounds like it does, although I don't know the key combos for that), you should be able to flash the Blu (official) firmware, depending on how they set up their updates, or at least get stock recovery going again. Once again, as long as you don't flash anything custom, you should be able to maintain the warranty status.
Please go ahead and create an XDA account, so you can post in other forums. Then, post in the [GENERAL HELP] Post Your Questions Here Instead of Making a New Thread thread (or at least) in the > Blu Vivo Air > Vivo Air Q&A, Help & Troubleshooting forum. Your device experts can be found there.
Hope this helps, and good luck!

[Completed] Softbricked phone - recovery wont work

Hello,
actually i have made it, a softbrick which i couldn't fix alone
At the moment i use the ZTE Star 2.
So here is the problem:
I would like to flash a custom rom like MIUI, for that reason i was searching for a custom recovery, i chose this one:
recovery.romzh.com/zte/2015/01/136.html
because i couldn't speak Chinese i tried every combination of the given numbers.
But nothing have made it.
So i extract the recovery img file from the application (in the TEMP folder) and try to flash it manually with adb fastboot, after the file is transmitted to the phone there is a response says FAILED unknown command or something like that.
Okay, for that reason i pushed the file to the root of my sdcard and flashed it with the app rashr, which have work "correctly".
And i thought this was the problem...
Now if i want to boot my phone the ZTE logo appears for about halve a second and then the display turns off... But i think the phone is still on, because if i press the power button only a short time, nothing happens. But if i press it about 10 seconds the device will reboot, like if i do that while it is running...
The first time i have made this (press about 10 seconds) the device has booted normally but since i tried it again to get in the recovery it would boot, enter the recovery or something else, i see the logo for about half a second and nothing happens.
I couldn't enter the recovery mode and font know how i should enter the bootloader, because i don't know if the device is powered off or powered on
Thanks in advance for any help!
Greetings TurboToni
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!

[Completed] Nexus 5 power button got stuck. Fixed that, but my phone is bricked now. Help plz.

Hi guys,
My nexus 5 power button got stuck inside though it clicks well from outside. Problem with this is that the phone reboots continuously. This is a common problem for nexus 5. I fixed this problem by replacing the power button unit on the motherboard.
But now, the phone boots on until the colorful dots circling (lollipop booting) and stays there forever without going any further.(i guess its a boot loop)
I have never rooted my phone or done any tinkering with it.
I have not enabled USB debugging unfortunately and now am not able to change that. At least i don't know how to from bootloader.
I am able to get to the bootloader and get it to unlocked state. But i am not able to flash any image as the bootloader reboots and gets locked again and then i get "flash write failure" for all the commands.
How do i get past this, or is my phone bricked for good?
Any help would be much appreciated. Thanks
Hello,
Welcome to XDA.
Try this thread, it seems to be able to bring the worst bricks back from the dead.
http://forum.xda-developers.com/goo...l-06-03-14-one-click-factory-restore-t2513937
If you need further assistance, try posting your question in the forum linked below.
http://forum.xda-developers.com/google-nexus-5/help
The experts there may be able to help.
Register an XDA account to post and reply in the forums.

Categories

Resources