Hi there,
I can connect my Windows 10 to the internet via USB Tethering, but my question is " Can I log all connection attempts via usb tethering?"
The purpose is to conduct a traffic analysis of my Windows via usb tethering, I want to log all the ip addresses that my Windows send/receive from.
Please don't suggest using DD-WRT, Fiddler or Wireshark; as my question is about "usb tethering ip logging".
I have:
Samsung Galaxy Note 3
Cyanogenmod 12.1 "rooted"
Windows 10 Home
Related
All,
I have a web application that I have built in a VMWare environment. I would like to review the page layout on my Universal via USB connection - but can't.
I am using a bridged connection with a dedicated IP address on my VMWare instance. I can connect to the site from my host machine's (The machiine that VMWare is installed on) browsers - with success. When I plug the Universal or any other mobile device into the host - via USB - activesync starts, a connection is made between the device and my laptop.
When I go to iexplore on my Universal and type in the IP address of the VM Server I get an error. "The page cannot be displaued or downloaded because the connection was lost. Check the connection and try again later."
I can see from my laptop that the connection has not been lost between the Universal and my laptop.
Do you have an idea on how to make this work?
ActiveSync "pass through" settings?
Checked. Tried both Active Sync 4.2.x and 4.5.
Any application or way to share computer internet connection to Windows Mobile 5 using USB cable?
Should happen automatically as long as ActiveSync is running and has established at least a Guest partnership. You may also want to check "This computer is connected to" in ActiveSync connection settings.
uzbek
i did ones worked fine via active sync but i could do it again message came up like i need to check my connection
Just disable the proxy in the Proxy Manager of the Programs screen.
I'm a new TF300T owner, and want to connect to the internet via my USB connection at my office rather than over WiFi. My PC is running Windows XP. Any suggestions?
Try this: http://www.geekyblogger.com/2008/05/sharing-internet-connection-using-wifi.html
Your search queries are ad-hoc wifi, and Internet Connection Sharing
Thanks, but my PC's internet connection is via a LAN cable, not WiFi. When I try to configure the connection it doesn't work as shown on the blog...
Hello Experts,
I am not a super expert but working on it on own interest basis.
My situation is,
I have one broadband connection thru ADSL+wireless router.
Normally my PC & other android devices at home are connected to wireless router of broadband.
Sometimes, this broadband connection fails for a couple of days.
I have one Android 6.0 mobile device which have unlimited data plan, but other android devices like mobile, Tabs does not have data connection.
During that time,
I create a hotspot & share to other wireless devices, but my PC does not connect until I connect thru USB tether.
Is it possible ??
To make a bridge in android 6.0 MM, between data connection & wi-fi ?? (I will connect it to wireless router with out hotspot), & set the DNS & gateway manually in the PC & wireless router.
What I have already done
Connected my mobile having data conn to win 10 PC with USB tether & PC is also connected to adsl router thru LAN.
Now,
I have checked the address of USB tether network IP (192.168.XX.XX), gateway (192.168.XX.XX) & DNS (192.168.XX.XX).
Then I created a bridge connection at PC between ADSL LAN & Tether Connection. Set above mentioned IP, gateway & DNS at created bridge connection.
Then I logged in into ADSL router,
Changed its IP from 192.168.1.1 to 192.168.XX.XX ( matching with USB tether conn except last digit).
Then I connected all my android devices to ADSL router wireless network & manually set the DNS address to every network same as USB tether DNS.
profit :
Not much, But I am getting a strong wifi network signal from ADSL compared to mobile hotspot & all my devices connected to internet being at different places of home with different people.
My above query was to get rid of USB tether in this situation.
Thank you for reading all above & suggestions if any.
[email protected] said:
Hello Experts,
I am not a super expert but working on it on own interest basis.
My situation is,
I have one broadband connection thru ADSL+wireless router.
Normally my PC & other android devices at home are connected to wireless router of broadband.
Sometimes, this broadband connection fails for a couple of days.
I have one Android 6.0 mobile device which have unlimited data plan, but other android devices like mobile, Tabs does not have data connection.
During that time,
I create a hotspot & share to other wireless devices, but my PC does not connect until I connect thru USB tether.
Is it possible ??
To make a bridge in android 6.0 MM, between data connection & wi-fi ?? (I will connect it to wireless router with out hotspot), & set the DNS & gateway manually in the PC & wireless router.
What I have already done
Connected my mobile having data conn to win 10 PC with USB tether & PC is also connected to adsl router thru LAN.
Now,
I have checked the address of USB tether network IP (192.168.XX.XX), gateway (192.168.XX.XX) & DNS (192.168.XX.XX).
Then I created a bridge connection at PC between ADSL LAN & Tether Connection. Set above mentioned IP, gateway & DNS at created bridge connection.
Then I logged in into ADSL router,
Changed its IP from 192.168.1.1 to 192.168.XX.XX ( matching with USB tether conn except last digit).
Then I connected all my android devices to ADSL router wireless network & manually set the DNS address to every network same as USB tether DNS.
profit :
Not much, But I am getting a strong wifi network signal from ADSL compared to mobile hotspot & all my devices connected to internet being at different places of home with different people.
My above query was to get rid of USB tether in this situation.
Thank you for reading all above & suggestions if any.
Click to expand...
Click to collapse
Yez and yes, search Hack5 in youtube and find the video relating to wifi pineapples( the bridge/router) and you will find everything you need , along with EasyTether pro(works fully tested to bypass tethering restrictions) . I dont know how the pineapple/router works but I know EasyTether uses adb to take and make a usb tethered connrection, then with a moderate-advanced setup(ie. wifi pineapple) you will be broadcasting wifi to any device you need. The only downside is you have to usb tethr to the pineapple at all timez to make a usable wifi,So in my opinikn best to buy anothr $45 a mnth plan especially 4 tethering, tho Im just now switching to a ISP for my internet it did the job, i even freelanced for awhile all remotely using the hotspot/created wifi/bridged connection.Hope that hellps brutha
Th
Tks...Bro...
I did it long before without spending a single penny.
I simply used network hack and bluffed the pc and other devices...It is working like charm....
Hi,
I currently connect my Windows 10 Surface Book laptop to my phone's internet using a Verizon Samsung Galaxy S8+ and PdaNet+. Both 'USB Tether' and 'WiFi Direct Hotspot' modes work great and I haven't had any issues thus far.
Today I decided to subscribe to a VPN service (Private Internet Access), downloaded PIA's app, and ran the VPN on my phone. When using 'USB Tether', I have internet on my laptop. But if I use 'WiFi Direct Hotspot', I don't have any internet connection at all and the Windows network status displays 'No internet, secured'. Below are the messages I receive in Internet Explorer 11 and Chrome and they both mention DNS. I'm not very familiar with networking, so any guidance you can give me would be much appreciated!
Thanks,
Bast
******************Internet Explorer 11**********************
Can’t reach this page
•Make sure the web address is correct
•Search for this site on Bing
•Refresh the page
More information
The DNS server might be having problems.
Error Code: INET_E_RESOURCE_NOT_FOUND
******************Chrome********************
No internet
Try:
Checking the network cables, modem, and router
Reconnecting to Wi-Fi
Running Windows Network Diagnostics
DNS_PROBE_FINISHED_NO_INTERNET