Any application or way to share computer internet connection to Windows Mobile 5 using USB cable?
Should happen automatically as long as ActiveSync is running and has established at least a Guest partnership. You may also want to check "This computer is connected to" in ActiveSync connection settings.
uzbek
i did ones worked fine via active sync but i could do it again message came up like i need to check my connection
Just disable the proxy in the Proxy Manager of the Programs screen.
Related
is it possible to browse internet with mi pc connection through active sync, i just can do it using cell connection. qtek 1010, wallaby, xda.
yes it's possible
if it's turn on in activesync
if your firewall let it
and if you havent picked my isp as your network when connected to activesync
i don´t get it at all
OK, PASS THROUGH IS ACTIVATED IN ACTIVE SYNC 3.8,
FIREWALL IS NOT ENABLED,
AS NETWORK ADAPTERS I HAVE:
ASYNCMAC1 NDISWAN
NE2000
PPTP1 NDISWAN
IN ALL OF THEM "USE SERVER-ASSIGNED IP ADDRESS"
DO I HAVE TO CHANGE ANYTHING HERE OR IN CONNECTIOS WHERE DEFAULT INTERNET SETTINGS IS CHOSEN AND GPRS PROVIDER INFO, SHOULD I SET NEW HERE?
REMEBER I HAVE PHONE POCKET PC 2002.
THANKS FOR YOUR HELP, I´VE BEEN A WHILE AROUND THIS.
Set the passthrough connection to "The Internet"
Worked for me.
settings->Connections->Connections->Advanced->Select Networks
it says
Programs that automatic... connect to the internet should connect using
and there is a dropdown box
I updated to the lovely windows 6. I could sync to my XP computer no problem until I've used the internet sharing utility. Then everytime I connect the phone to the computer, the computer networks with the internet sharing utility and activesync doesn't get a look in.
If I delete my vodafone 1240 from the activesync devices I can start again until I use internet sharing again.
I need both. How can I stop internet sharing so that activesync will again recognise the computer? I connect via the usb port.
Try to accept wireless connection in ActiveSync.
not sure if it will work for you, but what worked for me (HTC touch pro, custom ROM PROven):
1. go to Settings on your HTC, Connections, USB-to-PC, select ActiveSync radiobutton, uncheck the "Ask me first about...." checkbox.
2. connect your phone using active sync.
3. disconnect (unplug)
4. go to that same settings again. Now select the other radiobutton (DiskDrive), AND check the "Ask me first..." checkbox.
When you now again connect your phone, it will (hopefully) ask what connection you want to make.
Otherwise, try changing the order of the above actions.
hope that helps.
In case if the above post doesn't help
Activesync on PC uses LAN interface for data transfer between PC and WMPhone.
When you enable internet connection sharing it changes some connections' settings to manual - i.e. 192.168.0.1. So make sure that your LAN interface that is used by activesync, is set to get IP address automatically.
Ok, here's the problem.
How to configure my connection, so when I connect my device to Windows Mobile Device Center it can connect to the internet. When I set the Internet Connection Sharing, my phone stops syncing, it's as if I haven't connected it, and it continues, until I remove the ICS. Bridge isn't working aswell. I need it, so I can download QuickGPS and Weather info.
right i think i know what you mean. You want to access the internet on ur device when it is synced yes?
DOnt use internet connection sharing on the device, that is if you want to use your device as a modem (so to speak) using the phone network as an internet connection for your computer.
What you need to do is in WMDC (active sync in my case as i have xp) settings, ensure that in the connection settings "this computer connects to the internet" is selected. You should then be able to get internet thru your computer on your device whilst still syncing.
Let me know how it goes as i dont have WMDC (i dont like vista.... yet)
I meant I used Internet Connection Sharing on my PC nework adapter, sharing with the "Mobile Device Network".
WMDC is configured as "This computer is connected to: The Internet", but it still doesn't connect.
it doesn't work for me too; WMDC is configured as "This computer is connected to: The Internet"
it's seems that i can't find the right settings. I sync to an exchange server 2007 from my company. My configurations are already set up and works fine with a minor issue that i wish to solve.
- When i am over wifi or EDGE my phone just sync perfectly. I have a VPN connection, and activesync has the internal IP of the Exchange server. So i had set up an exception on settings-connections-connections-advanced-exceptions with the IP of the internal server. That forces the device to login to the VPN when i manually start a sync from the device.
- When i am over the PC (USB), on my LAN, and Activesync form the PC has the "This computer is connected to:" "Automatic" or "The Internet", it doesn't sync because the device tries to login to the VPN, which is not possible from inside the LAN. I had to change the PC ActiveSync option to "Work Network" as you can see on the attach picture in order to let the device sync on both scenarios (USB and Wifi/Edge) which works perfect. So, what's the problem? That when i use "Work Network" while connected through USB, the device can sync to local exchange, but can't connect to the internet (for example to browse a page). So i have to change that PC Activesync option every time i want to sync or browse the web.
Can anyone suggest me any configuration that let me do all the things (sync through the VPN when i'm on Wifi/EDGE, sync from PC when i am on USB on the LAN, and browse the web when i am also on USB without having to manually change Activesyn PC Settings?
Thanks!!!
I have one irritating oddity that I've experienced across several builds of windows mobile, 6.1 and 6.5. I sync my phone with work outlook via usb.
In work we have access to the internet via a proxy. My desktop runs XP and activesync 4.5, and I understand the desktop proxy settings should be passed over to windows mobile so any apps on the phone would be able to reach the internet.
The proxy address does get passed, but it appears in the "socks" entry, not the HTTP entry. I can fix this by opening activesync, click on...
file, connection settings, change "this computer is connected to" - automatic
then
file, connection settings, change "this computer is connected to" - work
then
file, connection settings, change "this computer is connected to" - automatic
then the proxy address will be in the "HTTP" and "socks" entries.
Does anyone know of any good fixes for this?
I suspect I will have to move to windows 7, but would be nice to get a quick fix, so I can just connect and go.