As the title says i flashed a bricked g920a that only boots to download mode no recovery and i flashed three different firmware in odin and each time it PASS!!! How is this possible? I get no error each time it finishes and says pass but phone will not boot up!! Please help i don't know what else to do...
Can someone help me at least tell me if the problem is hardware or software i cannot find any answers and i have search and ask many times but no one sheds a little light into my problem please help someone in need of knowledge.
I think you must wipe your datas
Boot in recovery and select wipe data.
All datas and sd card will be deleted
EDIT: Oh your phone boots into download mode.. hum no ideas sorry
Thanks Dago for looking into it!! Yeah only download mode it's driving me crazy!!! Hope someone else can help at least by giving ideas
You need to make sure you are downloading the correct firmware for sm-g920a, and that it's the latest available. In Odin check the option to wipe NAND as well. If that doesn't bring it back then it's toast. It may take a while to boot (I've seen up to 20 minutes)
Try to download on your pc smartswitch connect your phone in your pc
Press on top the more button then the emergency recovery after that press device initialization
you gonna need the exact model of your phone and the serial
Good luck !!!!
Sean89us said:
You need to make sure you are downloading the correct firmware for sm-g920a, and that it's the latest available. In Odin check the option to wipe NAND as well. If that doesn't bring it back then it's toast. It may take a while to boot (I've seen up to 20 minutes)
Click to expand...
Click to collapse
Sean89us i checked the firmware version it's the right one and it's the latest which is PJ1 well it's the october security update so i assume it's the latest. I will try to wipe nand as you recommended i will keep you posted. Thanks.
Phantom162 said:
Try to download on your pc smartswitch connect your phone in your pc
Press on top the more button then the emergency recovery after that press device initialization
you gonna need the exact model of your phone and the serial
Good luck !!!!
Click to expand...
Click to collapse
Its At&t so i am toast no smart switch for us :crying: But thanks for the idea!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> userdata.img
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
That is my odin log using firmware PJ1 doing a nand wipe phone will boot to samsung logo and nothing more waited an hour and nothing it got stuck at the samsung logo no recovery. Any thoughts? Is the phone DEAD? Phone does not power on only in odin mode.
Related
Hey guys,
I've got a Samsung Galaxy Tab Pro and now i have a huge problem. I rooted it a long time ago and decided to install TWRP today via TWRP Managaer from Play Store.
I guess i did something wrong. After the app told me that the installation of TWRP was successful, i restarted the tablet. Now the screen says: "downloading, do not turn of the device". And i warted for about 1 hour and nothing changed. I cant event shut down the tablet. If I hold the Power key, it only restarts. The only thing i can do is go to ODIN mode.
But i am kind a newbie and i have no clues what to do now. Any help is welcome. Thanks guys.
Hi, thank you for using XDA Assist. You probably have to flash the stock firmware with Odin and start the process all over. Try here for help first, http://forum.xda-developers.com/gal...-how-to-root-install-custom-recovery-t3087451. Also see your device's forum here, http://forum.xda-developers.com/galaxy-tab-pro-12-10-8. That is the best place to get help in the future.
Hey, thanks for your help. I just tried to flash the stock firmware via ODIN. But it always says that it Failed.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T520XXUANI1_T520DBTANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried on differend USB ports and installed differend Drivers. I've no idea what i should do now.
Hi, the only other things I can suggest is to:
Re-download the firmware file and check its md5
It's good you tired different usb ports. Make sure they're the ones in the back of the pc and 2.0, not 3.0
Try different cables
Keep trying. Odin can be finicky. I've has it fail many times and then for some unknown reason it'll work.
Thread closed.
hello all,
I'm a noob and i messed up my note edge. I rooted it on stock kk 4.4.4 rom from Rogers and installed superuser and twrp. I wanted to do a factory reset through the settings and reset and erase everything but it won't allow me to. Every time i select erase it would just do nothing. Do i thought I'd be smart and enter twrp by holding volume up, home, and power button then wipe everything. Now when i power on the phone it just boot loops with the original Samsung galaxy note edge splash screen. I am unable to find the original rom for my N915W8 Rogers phone so i read I'm done forums a T-Mobile rom should work. I downloaded a lollipop T-Mobile rom and tried to flash it with Odin but comes up as fail. I tried to put the zip file into my external micro sd card and use twrp to install and it failed again. Any help is greatly appreciated. My end goal is to be able to get the lollipop Rogers rom with root back on my phone.
Thanks
Enter Download Mode and use Odin to restore the stock ROM.
Thanks for the reply. I tried ODIN but unable to flash. It fails right away.
This is what I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915TUVU1BOG2_N915TTMB1BOG2_N915TUVU1BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any other clue? I think the problem is I have no data in my phone. I am thinking it needs some base to work off of. Please don't laugh at my logic lol.
Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.
bogdan109 said:
Connect your phone to pc and go to device manager. How does it appear in to device manager?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
Well.. ever since it was bricked, I can't seem to find it in the device manager at all, though Odin does seem to recognize my device.
Also, I reinstalled Samsung Kies and the drivers several times, but it always gets stuck on "connecting device" each time on Kies.
bogdan109 said:
Connect your phone to pc and go to device manager. How does it appear in to device manager?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
After trying to update Kies drivers once more, now it shows under Modems as "Samsung Mobile USB Modem #5"
Cleon7 said:
After trying to update Kies drivers once more, now it shows under Modems as "Samsung Mobile USB Modem #5"
Click to expand...
Click to collapse
After updating drivers with an ADB-based toolkit, it doesn't show in the device manager again.
Someone please help.. I'm running out of options..
Cleon7 said:
Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Here is everything you need to know.
For futher questions head over here > Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
nilac said:
Hi and thank you for using XDA Assist
Here is everything you need to know.
For futher questions head over here > Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
I've already tried the procedure in that thread, and after failing several times, I decided to start a thread here..
Anyway thanks, I'll open a new thread in the board you provided.
So I was following this guide :
http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
And I think I flashed CF-Root correctly. Tried to boot, Recovery is not seandroid enforcing. I then flashed TWRP 2.8.7.1 (the .img one) and now it proceeds to recovery after boot screen.
I tried restarting to system with TWRP and it went into a bootloop.
Am I on the right track? I mean is it supposed to be like that until I do a factory reset? I'm scared cause the ROM is still downloading lol how do I put it in the device's internal memory? Will I be able to in Download Mode?
On a PC running Windows XP right now, Samsung's USB Drivers don't seem to work whatsoever. I'll try it on my laptop and we'll see.
(p.s. should I have opted for the one-click rooting and stuff? Idk the guide tells me to do it via Odin so yea lol)
Since you were on 5.0.2 you could've used the PingPongRoot to easily root your phone. I did that but then after a while I thought I want a custom ROM so I updated to 5.1.1 and tried to use odin to root my phone but got the same issue as you.
After a few hours of struggeling I got out of the bootloop by doing an emergency software recovery from Smart Switch. However I'm not sure if it will recover to 5.0.2 or download the latest 5.1.1 in your case.
Nonetheless when I got my phone to work again I just flashed UniKernel with TWRP and then I was rooted.
I wont touch odin ever again I'm too nooby for that and it caused me to panic so hard with that goddamn bootloop.
I hope you get it solved!
Hey guys; New to the forums; Read a few guides nothing has really helped so far but I could just have missed something;
So what happened is;
I have succesfully taken all the bloatware off my s6 Edge; I was trying to do the same for the misses phone (Galaxy s6) Yes i made sure to get the right firmware
I downloaded from sammobile.com the G920I XSA so i could get rid of her telstra bloatware. However halfway threw the installation (Odin) it said failed and the phone was stuck in download mode for ages; I decided to just try a reset (after about 45 - 1hr) then it started booting up with a ! saying an error has occurred while updating the device software Use the Emergency Recovery function in the Smart Switch PC software;
Which I have tried doing; However it keeps getting to about 1 or 2% of the installation (yes it has finished the download read something on here about people getting stuck at 51% download) Then it asks me for a recovery code from a previous computer; I bought this phone used off someone with all the stock bloatware from telstra so I dont have the recovery code; How can I get around this ? I dont have their phone number either as it was on my old sim which didnt fit into this phone and I have already given my other phone away...
As of this min I am downloading the telstra version of the firmware again, Will this fix it ? and then will I be able to put the XSA firmware on ?
Thanks for any help
Appreciate it
EDIT...
This is what I get in odin
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
whipz said:
Hey guys; New to the forums; Read a few guides nothing has really helped so far but I could just have missed something;
So what happened is;
I have succesfully taken all the bloatware off my s6 Edge; I was trying to do the same for the misses phone (Galaxy s6) Yes i made sure to get the right firmware
I downloaded from sammobile.com the G920I XSA so i could get rid of her telstra bloatware. However halfway threw the installation (Odin) it said failed and the phone was stuck in download mode for ages; I decided to just try a reset (after about 45 - 1hr) then it started booting up with a ! saying an error has occurred while updating the device software Use the Emergency Recovery function in the Smart Switch PC software;
Which I have tried doing; However it keeps getting to about 1 or 2% of the installation (yes it has finished the download read something on here about people getting stuck at 51% download) Then it asks me for a recovery code from a previous computer; I bought this phone used off someone with all the stock bloatware from telstra so I dont have the recovery code; How can I get around this ? I dont have their phone number either as it was on my old sim which didnt fit into this phone and I have already given my other phone away...
As of this min I am downloading the telstra version of the firmware again, Will this fix it ? and then will I be able to put the XSA firmware on ?
Thanks for any help
Appreciate it
EDIT...
This is what I get in odin
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
My bad, I didnt know you needed to restart computer after each Odin; Reset the computer and the phone and everything is working smoothly now; Just got to find the right stockfirmware without all that bloat crap