hello all,
I'm a noob and i messed up my note edge. I rooted it on stock kk 4.4.4 rom from Rogers and installed superuser and twrp. I wanted to do a factory reset through the settings and reset and erase everything but it won't allow me to. Every time i select erase it would just do nothing. Do i thought I'd be smart and enter twrp by holding volume up, home, and power button then wipe everything. Now when i power on the phone it just boot loops with the original Samsung galaxy note edge splash screen. I am unable to find the original rom for my N915W8 Rogers phone so i read I'm done forums a T-Mobile rom should work. I downloaded a lollipop T-Mobile rom and tried to flash it with Odin but comes up as fail. I tried to put the zip file into my external micro sd card and use twrp to install and it failed again. Any help is greatly appreciated. My end goal is to be able to get the lollipop Rogers rom with root back on my phone.
Thanks
Enter Download Mode and use Odin to restore the stock ROM.
Thanks for the reply. I tried ODIN but unable to flash. It fails right away.
This is what I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915TUVU1BOG2_N915TTMB1BOG2_N915TUVU1BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any other clue? I think the problem is I have no data in my phone. I am thinking it needs some base to work off of. Please don't laugh at my logic lol.
Related
Hey guys,
I've got a Samsung Galaxy Tab Pro and now i have a huge problem. I rooted it a long time ago and decided to install TWRP today via TWRP Managaer from Play Store.
I guess i did something wrong. After the app told me that the installation of TWRP was successful, i restarted the tablet. Now the screen says: "downloading, do not turn of the device". And i warted for about 1 hour and nothing changed. I cant event shut down the tablet. If I hold the Power key, it only restarts. The only thing i can do is go to ODIN mode.
But i am kind a newbie and i have no clues what to do now. Any help is welcome. Thanks guys.
Hi, thank you for using XDA Assist. You probably have to flash the stock firmware with Odin and start the process all over. Try here for help first, http://forum.xda-developers.com/gal...-how-to-root-install-custom-recovery-t3087451. Also see your device's forum here, http://forum.xda-developers.com/galaxy-tab-pro-12-10-8. That is the best place to get help in the future.
Hey, thanks for your help. I just tried to flash the stock firmware via ODIN. But it always says that it Failed.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T520XXUANI1_T520DBTANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried on differend USB ports and installed differend Drivers. I've no idea what i should do now.
Hi, the only other things I can suggest is to:
Re-download the firmware file and check its md5
It's good you tired different usb ports. Make sure they're the ones in the back of the pc and 2.0, not 3.0
Try different cables
Keep trying. Odin can be finicky. I've has it fail many times and then for some unknown reason it'll work.
Thread closed.
So I was following this guide :
http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
And I think I flashed CF-Root correctly. Tried to boot, Recovery is not seandroid enforcing. I then flashed TWRP 2.8.7.1 (the .img one) and now it proceeds to recovery after boot screen.
I tried restarting to system with TWRP and it went into a bootloop.
Am I on the right track? I mean is it supposed to be like that until I do a factory reset? I'm scared cause the ROM is still downloading lol how do I put it in the device's internal memory? Will I be able to in Download Mode?
On a PC running Windows XP right now, Samsung's USB Drivers don't seem to work whatsoever. I'll try it on my laptop and we'll see.
(p.s. should I have opted for the one-click rooting and stuff? Idk the guide tells me to do it via Odin so yea lol)
Since you were on 5.0.2 you could've used the PingPongRoot to easily root your phone. I did that but then after a while I thought I want a custom ROM so I updated to 5.1.1 and tried to use odin to root my phone but got the same issue as you.
After a few hours of struggeling I got out of the bootloop by doing an emergency software recovery from Smart Switch. However I'm not sure if it will recover to 5.0.2 or download the latest 5.1.1 in your case.
Nonetheless when I got my phone to work again I just flashed UniKernel with TWRP and then I was rooted.
I wont touch odin ever again I'm too nooby for that and it caused me to panic so hard with that goddamn bootloop.
I hope you get it solved!
when I boot it just gives me some kernel is not seandroid enforcing so i'm trying to flash a stock firmware. G900P_SPR_G900PVPU3BOG1_G900PSPT3BOG1_Original.zip. is the name of file and its for a sprint S5.
Here is the odin output
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELP ME please.
I can flash the backup although it gets stuck at yellow boot screen. but that does get rid of the seaandroid enforcing
If someone could help me as well I'm having a similar problem. I have tried using multiple Odin versions and many stock SM-G900P 4.4.2 firmwares from multiple sources, but always have the same messages pop up.
Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_SPT_G900PVPU1BOA6_G900PSPT1BOA6_CL3859396_QB3804569_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
USB debugging is on and Odin does recognize the device is connect, I have also already installed the drivers again just to be sure. I have used Odin before with no trouble maybe its the fact the phone is from sprint and on lollipop since sprint is stingy on unlocking -_-. If someone could point me in the right direction or 100% working firmware links I'd appreciate it. I have also tried going about this through Heimdall and failed not even being able to obtain the pit file. If someone could provide a working one I'd also appreciate it I am fully aware it may brick the phone as everything else may do. Or show me the me the step by step to flash with Heimdall with a .tar. I'll take any advice thank you
you can try the newer firmware ok4
maybe this will work . unzip and place md5 in ap slot of odin
http://forum.xda-developers.com/spr...t/rom-sprint-ok4-stock-tar-file-odin-t3262667
Sprint new locked bootloaders
unteaglejohnk said:
when I boot it just gives me some kernel is not seandroid enforcing so i'm trying to flash a stock firmware. G900P_SPR_G900PVPU3BOG1_G900PSPT3BOG1_Original.zip. is the name of file and its for a sprint S5.
Here is the odin output
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELP ME please.
Click to expand...
Click to collapse
I have the same problem myself and it took me a few minutes to realize what the problem is. I just got a new phone from Sprint because my other one the USB port was basically broken I couldn't connect or charge. So after a few failed attempts at flashing a ROM I decided to look at my firmware and realized that it was the new updated bog1 version. Sprint decided to lock all the boot loaders so as of this moment I don't know how to flash any ROM or downgrade as the bootloader will not let you. As a matter of fact just last night I was walking into Walmart I pulled my phone out of my pocket to look at it and it was just finishing up installing some security policy updates. My phone then immediately restarted and got stuck at the spark screen. Just the fact that I was rooted sent my phone into a boot loop. As of right now the only thing I can do is reflash the stock bog 1. I have managed to get access to this one and I'm working on modifying the bootloader in anyway I can. I'm a little newer to this but I catch on pretty quick. As of now I have all the permissions unlocked for me to access all the files in that stock bog1 rom but haven't found a way to make them stick yet. I'm going to have to break down each individual file and hopefully I can come up with a solution or anybody for that matter because I'm a few months away from my contract being up and if I can't root my phone and customize it I don't want it. If they want my phone lock down and toddler mode then they can pay for it that's how I look at it lol. Make sure you turn off automatic security updates. There's also a post in here of how to clean that out so you don't have the newest security policy update. I know the exact file the bootloader is in but haven't found a way to get into it or modify it yet even though I have permission. It shows it copying /deleting but doesnt change. There is way too many people in this world to not have someone come up with a solution by now and anytime I search for it I get results from a year to five years ago , hardly anything recent thanks google. I also posted on times and started a thread I'm trying but I'm not as advanced as some of these developers on here but I am determined lol
I finally got it to boot up. Just took like 20 mins. Now it boots sometimes while others it won't and says process has stopped responding after the yellow screen. Why does it do this. The rom is official rom directly off Samsung kids.
may have cracked bootloader BOG1 G900P
i have been playing in thr sys files and today i managed to get a custom animation boot installed. after that i flashed a modded bog1 file from philz. it took and succesfully booted and am now reinstalling all my apps. i think i over wrote or blocked my bootloader. ill get back when i know for sure:laugh:
http://samsung-updates.com/device/?id=SM-G900P
Good evening all.
My cousin just brought me his galaxy grand prime G530H and the phone was booting but very slow. He asked me to format it for him. So I hard reset the phone and wiped data but when I started the phone, the virus is still there and the phone was not working properly it even has a launcher of its own (hola launcher). It looks as if the virus became part of the system. I'm not able to uninstall it. The only thing I was doing is to disable it. But once I connect to the internet, the phone hangs and I can't do anything. What is the solution. is there a way to wipe it. This is the first time I see this. anyone had this issue before. Please need your assistance.
Ok here is another update. I tried to flash it with original stock rom from sammobile using Odin. I load everything and click start.
the writing fails with the following error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone can suggest anything
Not sure if had applied an update that caused to become like that but this is my only conclusion and my cousin is saying that he did not do anything. Is there an image that I can restore it with that will undo this
Ok guys Please ignore my problem. I was able to find the solution in another thread and found the correct flash and flashed my cousin's phone and now it has been revived. Thank you XDA
Hello everybody!!!
The Galaxy Note 10.1 GT-N8000 of my friend don't work again, when it's powered on it shows a message
In english
Encryption failure
Unable to complete the encryption due to an interruption, reset the factory data (operation which erases all your data) before use. After resetting, try encrypting the device again
There is a button to do that, but nothing it's happen when i click
Recovery mode is not accessible to wipe data.
I try to flash some stock ROMs with odine but the flash failed
Odine3 log
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1787 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone can help me please
NOTE : Model number GT-N8000
I think you should manage to enter Recovery Mode to reset the factory data.
Its failing on boot image probably due to different/ later boot .
As said recovery mode and FORMAT system data etc .
Then Odin flash latest stock rom .