Hello,
First of all, I don't really know if this is the right part of the site to post this kind of question, so if it's not, and a moderator can move my thread, please do so.
So, my Xperia Z3 has recently been in an accident, and as a result part of the sides (the chassis, bezel or whatever it is called) bended, and my screens colors broke (I can't really find the words to describe it better). So I ordered the replacement bezel and LCD+Digitizer combo.
I have a trusted technician who does all my repair work on all the handsets I've owned and needed repair work in the last 5 or so years, and what he told me is that there is a glue used in Xperia Z3 to keep the body and screen connected, and if my parts don't have it, unfortunately he can't fix it for me.
Is that glue he mentioned the adhesive tape?
If so, is one adhesive tape gonna cut it or should I put 2? (I saw on some forums that two layers of adhesive tape make for steadier placing and keeping in place)
Related
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Report it broken, pay $90 for a replacement through Asurion. Cheaper than $500, y'know?
Sent from my FroyoEris
You need to google for a eris digitizer.
LMGTFY
http://www.google.com/search?hl=en&...fai=CMBq5koWzTNrsN46EygTEha3rCQAAAKoEBU_Q0wbi
i think u can get them for like 40+ dollars off ebay
If you don't mind the long shipping times, you can get a digitizer + the entire housing together for around $60 on ebay. Doesn't seem like a bad deal to me.
#EDIT#
Zombie post . . . sorry about that. Need to remember to look at dates before replying.
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I just replace mine, and is wasn't too bad. There is videos on YouTube about how to do it. It took me about an hour, and the part costs about 40 bucks. If you need any help with it, feel free to email me [email protected]
Aaron
you can get one @ 49usd
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-g5-eris-p-2727.html
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I'm going through the same thing. Amazon has some digitizers for about $40. I decided to spend the extra $20 and get this instead
http://www.amazon.com/gp/product/B004F5CEDW
It's the whole casing. I didn't want to bother with stripping the digitzer off the frame which is glued on. With replacing the whole body, you just move the mainboard over and plug everything back in. At least this is my hope. I'll post here again when the thing actually arrives. I ordered it two weeks ago and it probably won't be here until mid March.
Good luck with whatever you decided to go with.
UPDATE. hmmm october was the post date. I guess this guy has long taken care of his problem
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
roscuthiii said:
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
Click to expand...
Click to collapse
There's Youtube videos for disassembly. I haven't watched them myself, but I know they exist, so they probably tell you what tools you need there. From what I remember hearing, just some small torx screwdrivers, or maybe some small phillips, too, but don't quote me on those.
Here is a link to the teardown video I followed.
http://www.youtube.com/watch?v=zHwm-32BI0w
The amazon link in my previous post is what I bought. It was the whole body. There are just screen replacements but I didn't want to mess with that because the digitizer is glued to the front piece. I didn't want to risk warping or breaking the front piece and completely screwing myself over. Anyway, what I bought came with the tools you need to perform the teardown and an extra screwdriver that was not needed.
I am glad I did this. However, it came with it's share of issues.
-The very top of my digitizer does not work. As a result, I can't pull down the notification bar. I can get to it through the menu button but it is annoying.
-I had to move the ear speaker and loudspeaker over. They were glued to some foam which was stuck/glued to the chassis. That foam absorbed the vibration. When my phone rings loud it is nasty because the speaker is bouncing around. I tried to cut some foam myself to replace what was stuck in the old case. It helped but it's not perfect.
-There are some rubber buffers? Isolators? Not sure what their called which also needed to be moved over form the old case.
-It took a month to ship to my house. After discovering these issues, I am kind've stuck with them because it would take a month to send the parts back and another month to get a replacement. By then I'll be due for a new phone.
So that's my experience of replacing the whole case.
Let me know if you have anymore questions.
Thanks for sharing your experience!
My pleasure. Glad to help out.
Sent from my Eris using XDA App
To add to this, because I'm sure there are others out there like me who intend to use their Eris until it gets run over, dropped in lava, drawn, quartered, and defecated upon . . .
I ordered the same replacement housing and digitizer as mentioned above, and had 2 small problems:
The housing I got had a nut in it that came loose, so that one of the corners wasn't able to reassemble properly.
There was something different in the new housing that caused the proximity sensor to function incorrectly.
For #1, I just used some super glue to weld the nut into place. This appears to have worked OK, but I fear that the point is weakened now and I will need to be very gentle if I disassemble the phone again.
For #2, The problem was that the housing was allowing bleed through inside the case from the proximity flasher to the light sensor, which caused the sensor to determine that there was something close to it when in fact there wasn't. I placed a small (oh so small) piece of electrical tape into the housing between where the IR flasher and sensor are located, and the problem was resolved.
If presented with the option of purchasing a new digitizer alone, or a new digitizer and housing together, follow groovel76's suggestion; it's well worth the time and money to go with the latter. The hassle of cleaning the old adhesive off of the new housing, and the risks of getting new adhesive in places where you don't want it far outweigh the cost of just getting a housing with adhesive pre-applied. I tried to do just a digitizer first, and ended up with a small amount of super glue (DO NOT RECOMMEND) getting on the new screen and the edge of the housing, as well as a screen that didn't seat properly because I didn't get quite all of the old bits out of the old housing. This resulted in dust getting under the screen and another crack when I attempted to fix what I'd screwed up the first time.
Between the availability of parts and ROMs for this phone, I see it being in my family for a LONG time yet.
Yes! Buy a digitizer online (most come with the tools you need such as the torx screwdrivers, mine did) and search for videos on youtube. That's what I did and it only cost me $37 for the digitizer and about 30 minutes of my time. And it worked perfectly as new when I got it all back together.
Has anyone seen a good take apart/repair guide for the Inspire4G. Just got digitizer replacement and cannot for the life of me figure out how to attach the ribbon cable without totally disassembling the phone. Hoping to avoid this.
If this is the wrong forum, please direct me to a better one rather than flaming me.
Thanks
Fairly certain that ifixit.com has a good teardown.
Sent from my SGH-T959 using XDA App
Thanks for the tip, but I find nothing for the DesireHD/Inspire4G there other than a total disassemble for the HD that I've already seen, but really did not help me. I just need to change to touch screen. I appreciate the try though.
Got it apart. And kinda back together. Apparently it is not a good idea to reuse the double sided tape that holds the LCD to the motherboard and the digitizer to the LCD. At least the phone works. Now, must order some proper adhesive tape and redo the whole thing.... Took me about 6 hours for whole breakdown and rebuild. Doesn't really seem to fit back together all that well though. Maybe I'll videotape my next breakdown.
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Jeffsmashkot said:
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Click to expand...
Click to collapse
Just so you know, I was a TOTAL noob in phone deconstruction. That being said, the old adhesive seemed quite sticky after i took it apart so I just reused it. Mistake number one. Once it was back together, i notice it slowly opening up like an accordion. The tape wasn't holding and the LCD, digitizer assembly started to rise up. I have since ordered some adhesive tape from the place I got the digitizer from. Definitely get the tape.
I did not bake it as in the video (i assume you watched the same one I did). I used an old spark plug gauge tool thingie to just cut through the tape. It was still really sticky so after i struggled to insert the digitizer ribbon cable, I just reused it. Don't do this. Get new tape.
I did have some plain old scotch double sided tape. I used it in one spot. Lesson: Don't use this stuff. Get new tape.
Did I mention that I think you should get new tape? All in all, it was quite laborious. I went really slowly so as not to brick it. When it was done the phone worked, but like I said the LCD raised up after a couple of minutes. The adhesive was not working anymore. At least I have gained confidence for the next take-apart. I can't believe i GOTTA go alll the way back to total break down. Aaaarrrgh.
So something like this should do the trick?
http://www.harborfreight.com/32-piece-sae-metric-feeler-gauge-32214.html
Thanks for the heads up... Where exactly do you recommend putting the tape? Does it just go on the black edges of the digitizer, or does it actually go on the surface of the LCD? Sorry if that's a noob question, but I haven't gotten the glass off and I want to make sure I have enough adhesive tape from the Ebay Vendor. Did you have any issues with reusing the mylar?
Sorry for the 1000 questions, I really don't want to shell out off contract prices for another phone...
Mylars were all reusable if removed carefully. I photographed every step so I would know what to put back where. Still waiting for my tape from Repairs Universe. The biggest two culprits are:
1] Tape holding back of LCD to the silver chassis frame and
2] Tape holding SIM FPC to the main board.
You might also tape the PCB cover to the upper board, mine was loose after rebuild.
That I believe that is it for the major tape requirements. Of course the digitizer needs to be taped to the LCD. I'm curious, though, the tape framing the LCD holding the digitizer seemed to have some thickness to it. Almost like foam rubber, quite thin, but thicker than regular cellophane tape.
Good luck. Let me know if you have any tips after your attempt.
Got the tape. Retried to rebuild with new OEM tape. Same result. The phone when completed expands like an accordion. The digitizer/LCD assembly does not stay stick to whatever is under it. I know when to admit defeat. Looks like I'm shelling out 500 for another phone. At least I have spare parts!
yeah i was going to do my screen myself till i seen the tear down & then called afew places around here that does screen replacements and said NO we won't touch the Inspire, i spent the money and let HTC fix it. was worth it they replaced the whole shell not just the screen ... IE lcd / digitizer / Outer case that was scratched and dented... basically a new phone with the guts out of my phone
I attempted to do this and let me just say that I too now have spare parts. I purchased a phone off of ebay. I didn't realize the no contract price went up to around 500.00 I should have gone directly to HTC. Live and learn...
I will be in possession of an HTC Inspire for testing purposes that also has a cracked screen. Not sure how bad it is but I was planning on just replacing the display for learning purposes. However it seems that it may not be worth the time spent.
If I do decide to give it a go I'll post my results here. First thing is to acquire new tape. Did you all purchase it locally or did you buy the adhesive online?
YouTube has lots of videos. Best to watch a few a see the best way. If you are scared to break it best you send it in for repair instead. Get a digitizer and screen combo.
Hi guys,
I'm hoping that one of you has experience of this and can guide me. I have managed to drop my DS (not for the first time) and damaged the digitizer panel. There are various people on ebay selling replacements, but some mention nothing about the double-sided tape and some state they don't include it. I will be fairly happy to replace the screen myself, but just wonder if I should be using a specific double-sided tape pre-cut, or just use any normal tape and cut it myself?
Cheers
any will do long as its very thin, watch u dnt cover the led hole up tho!
Thanks Dan. Ended up buying a roll off Amazon, so I've got about 5 miles of it left.
save it for next time!
i never understood why they only sell it in football pitch lengths and not like enough to do like 2 phones
I was trying to change digitizer to my tf300 by following this video http://www.youtube.com/watch?v=3_JRLd7lPv8 .The video is really bad, considering that this guy will show you a tf300 that has been opened before or something, because its very easy for him to do certain things, that i found very hard,and had to use other techniques.For example, i had really hard time separating the old digitizer and the plastic frame. In order to separate these two parts, i used some heat blowing gun (professional one) which turned to be very effective separating the digitizer from the plastic frame, but the plastic got wraped (as you can see in pic). Also, i don't have an adhesive tape or glue in order to stick the new digitizer to the frame so i m unable to stick the new digitizer to the frame.
https://www.dropbox.com/s/bwz1cw2pu1zrgst/IMG_20131010_135139.JPG
TheoKondak said:
I was trying to change digitizer to my tf300 by following this video http://www.youtube.com/watch?v=3_JRLd7lPv8 .The video is really bad, considering that this guy will show you a tf300 that has been opened before or something, because its very easy for him to do certain things, that i found very hard,and had to use other techniques.For example, i had really hard time separating the old digitizer and the plastic frame. In order to separate these two parts, i used some heat blowing gun (professional one) which turned to be very effective separating the digitizer from the plastic frame, but the plastic got wraped (as you can see in pic). Also, i don't have an adhesive tape or glue in order to stick the new digitizer to the frame so i m unable to stick the new digitizer to the frame.
https://www.dropbox.com/s/bwz1cw2pu1zrgst/IMG_20131010_135139.JPG
Click to expand...
Click to collapse
You used too much heat. I don't think the warped frame will fit anymore. You might need to buy a new one. You really don't need heat initially though. Since you were gonna discard the broken digitizer anyway, you should've just scraped the glass off. Use this type of adhesive to glue back.
Thanks for you info!I was thinking of puting the frame on a table, put the new digitizer to fit as much as possible, put some towel on, and then heat it again by gently pressing it with the iron.Else, where can i find a replacement part?I don't even know the name of this specific part so i can search for it.
TheoKondak said:
Thanks for you info!I was thinking of puting the frame on a table, put the new digitizer to fit as much as possible, put some towel on, and then heat it again by gently pressing it with the iron.Else, where can i find a replacement part?I don't even know the name of this specific part so i can search for it.
Click to expand...
Click to collapse
It's the front plastic bezel. Sometimes it's available used on Ebay. Best place to inquire would be Asus Parts located somewhere in Europe. I wouldn't try what you're thinking of doing unless you can straighten it again using the broken digitizer, as the screen is extremely brittle and the slightest pressure might crack it.
Hi all!
Got a bit of a problem that's driving me insane!
Not having lick with my Z3's at the min, had one get smashed at the gym and a few weeks after I get my new one, my dad knocks it out of my hands and smashes the rear of the phone...
So, I have bought a new glass rear panel, only I have fitted two of these and they are both literally just fell off in less than a single day.
I have also bought the replacement from 2 different places.
latest one is from replacebase.
From what I can see, its because the actual rim that the glue sticks too on the phone is actually lower than some of the components in the phone itself!
Can anyone help me...
Am I missing something or what? is there suppose to be a separate layer that I may have pulled off when removing my old rear cover.
U need to buy a separate back cover adhesive. Did u buy it?
replacment parts will never be tough like original one.
Save your money and repair it at original sony center, it will cost more, but will last longer.
And be careful with phone. Good luck
Ricky_Skrzepa said:
U need to buy a separate back cover adhesive. Did u buy it?
Click to expand...
Click to collapse
Is this what you mean??
http://pages.ebay.com/link/?nav=item.view&id=161515826281&alt=web
I have actually purchased that this time, so hopefully it's this that I needed haha
Got my new back glass and the linked adhesive above, but I'm pretty sure that's just the exact same glue that comes on the glass.
I know for a fact that if I fit this rear glass again, it wont stick for long.
The rim that the glue sticks too is lower than some internals which will just flex the glass up and off the rim.
This is getting annoying now! haha
Did the adhesive work? I bought similar ones for the front and back and they are not working... Perhaps I'm going to buy 3M double sided tape
Enviado desde mi Xperia