Hi, suddenly my device is not working fine. These are the problems.
-Can't see my notifications;
-Can't see my lockscreen;
-The home button doesnt' work;
-Factory mode isn't available, it says that there is no command.
I tried to unlock the bootloader from the Motorola site, but in the last step, when I enter the unlock code, it fails and tells me to enable the USB debugging. I tap seven times to the "number build" but nothing happens. I have the developer options but when I tap it the page is blank with no options. What can I do? Can somebody help me please?
Duku01 said:
Hi, suddenly my device is not working fine. These are the problems.
-Can't see my notifications;
-Can't see my lockscreen;
-The home button doesnt' work;
-Factory mode isn't available, it says that there is no command.
I tried to unlock the bootloader from the Motorola site, but in the last step, when I enter the unlock code, it fails and tells me to enable the USB debugging. I tap seven times to the "number build" but nothing happens. I have the developer options but when I tap it the page is blank with no options. What can I do? Can somebody help me please?
Click to expand...
Click to collapse
Try a proper external Factory Reset
Android 5.x (Lollipop)/Android 6.x (Marshmallow) Steps
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down key to highlight Recovery mode.
Press the Power key to restart into Recovery mode.
The screen will display an Android robot with a red exclamation mark. (ie. No Command)
While holding down the Power key, press and release the Volume Up key, then release Power.
Use the volume keys to scroll to Wipe data/factory reset and press the Power key to select it.
Scroll down to Yes - erase all user data and press the Power key to select it.
Click to expand...
Click to collapse
Unlocking the bootloader does not require ADB at all, it only requires fastboot and OEM Unlocking enabled in Developer options.
Please check!
Please tell me, if these are the problems you observed:
http://forum.xda-developers.com/2015-moto-g/help/bug-home-button-ignored-perfidious-t3464717
If yes, please tell if your device ran out of flash memory.
acejavelin said:
Try a proper external Factory Reset
Android 5.x (Lollipop)/Android 6.x (Marshmallow) Steps
Unlocking the bootloader does not require ADB at all, it only requires fastboot and OEM Unlocking enabled in Developer options.
Click to expand...
Click to collapse
Thank you very much. Problem solved.
Related
Im trying to factory reset a fake GS4mini labeled GT-I9190 under battery, which is locked because too many incorrect patterns.
Unable to sign-in to google account, because there is no Data Access point created.
Then I tried to factory reset the phone by accessing Android system recovery, which i could by pressing volume + and power key. But nothing happen when i click to 'wipe data/factory reset', instead it only show the warning sign page.
Appreciate if someone could help me on this.
shnyx said:
Im trying to factory reset a fake GS4mini labeled GT-I9190 under battery, which is locked because too many incorrect patterns.
Unable to sign-in to google account, because there is no Data Access point created.
Then I tried to factory reset the phone by accessing Android system recovery, which i could by pressing volume + and power key. But nothing happen when i click to 'wipe data/factory reset', instead it only show the warning sign page.
Appreciate if someone could help me on this.
Click to expand...
Click to collapse
Which button did u use to select the option, whether the home button or the power button?
Try the alterate button for selecting (i.e. If u tried to select using power button then try home button or vice versa)
Hit thanks rather than typing it now Free
parkourkarthik said:
Which button did u use to select the option, whether the home button or the power button?
Try the alterate button for selecting (i.e. If u tried to select using power button then try home button or vice versa)
Click to expand...
Click to collapse
Thanks for your reply.
I have tried lots of combination to access Recovery mode and to select options from menu.
Nothing happen when pressing the power button, but when i press home button the screen shows only the warning sign, again i press the warning sign i can see the menu. I can navigate though the menu by pressing Volume + and -, but when i Select an option (by Home button, Power button does not work) only the warning sing shows.
Is there any other alternative method to reset the phone, like using odin or any other tool.
shnyx said:
Thanks for your reply.
I have tried lots of combination to access Recovery mode and to select options from menu.
Nothing happen when pressing the power button, but when i press home button the screen shows only the warning sign, again i press the warning sign i can see the menu. I can navigate though the menu by pressing Volume + and -, but when i Select an option (by Home button, Power button does not work) only the warning sing shows.
Is there any other alternative method to reset the phone, like using odin or any other tool.
Click to expand...
Click to collapse
If u had enabled debugging option in the settings and have necessary drivers of ur device in the pc, try the following commands using the adb:
'adb reboot bootloader'
'fastboot devices'
(in the above command u'll have ur device in the list if everything is alright)
Atlast
'fastboot -w'
Hit thanks rather than typing it now Free
not working
parkourkarthik; said:
If u had enabled debugging option in the settings and have necessary drivers of ur device in the pc, try the following commands using the adb:
'adb reboot bootloader'
'fastboot devices'
(in the above command u'll have ur device in the list if everything is alright)
'fastboot -w'
]
Click to expand...
Click to collapse
Not working.
Im not sure usb debugging options is checked.
May be im using the tool not correctly,screenshot attached.
I have updated my H60-L12 to the latest stable ROM B532 through the various incremental upgrades. Everything seems to be working fine. Fastboot gives my phone as still being unlocked...yet on trying to load the twrp recovery via the method suggested with the latest multitool, I keep getting the message: "failed remote command not allowed"
Could it be something in my settings? Does anyone have any suggestions?
C command :- remote command not allowed
jjaxxo said:
I have updated my H60-L12 to the latest stable ROM B532 through the various incremental upgrades. Everything seems to be working fine. Fastboot gives my phone as still being unlocked...yet on trying to load the twrp recovery via the method suggested with the latest multitool, I keep getting the message: "failed remote command not allowed"
Could it be something in my settings? Does anyone have any suggestions?
Click to expand...
Click to collapse
Honor 6X BLN-L24
I had the same issue for the longest and tried everything possible under XDA's advice. its for the first time that I was not able to find the soloution to my isuues with the phone. Desperation let me to keep on trying until i accidently found how to a "Hard Reset" which eventually solved this issue
1) Power your phone off.
2) Hold Vol Up (+) Button, while keeping it pressed push the power Button.
3) As soon as you see the honor logo (blueish color), move from Vol up (+) to Vol down (-) While Still Pressing The Power Button.
4) Keep Pressing Vol (-) and Power Button, --> will go through "turning your device on" --> Blank Screen --> Hard Reset Menu.
5) Well everyone knows from this point onwards --> Wipe It Clean, Reboot, Just like New.
Hope this helps.
G.Deep said:
Honor 6X BLN-L24
I had the same issue for the longest and tried everything possible under XDA's advice. its for the first time that I was not able to find the soloution to my isuues with the phone. Desperation let me to keep on trying until i accidently found how to a "Hard Reset" which eventually solved this issue
1) Power your phone off.
2) Hold Vol Up (+) Button, while keeping it pressed push the power Button.
3) As soon as you see the honor logo (blueish color), move from Vol up (+) to Vol down (-) While Still Pressing The Power Button.
4) Keep Pressing Vol (-) and Power Button, --> will go through "turning your device on" --> Blank Screen --> Hard Reset Menu.
5) Well everyone knows from this point onwards --> Wipe It Clean, Reboot, Just like New.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your suggestion, I have already done a factory reset several times...to no avail! Will try again and let you know if it works this time round.
jjaxxo said:
Thank you for your suggestion, I have already done a factory reset several times...to no avail! Will try again and let you know if it works this time round.
Click to expand...
Click to collapse
have you enabled developer options and usb debugging in your device?
is your device being recognized by ADB?
miststudent2011 said:
have you enabled developer options and usb debugging in your device?
is your device being recognized by ADB?
Click to expand...
Click to collapse
Yes to all of those.....and factory reset does not work in my case.
jjaxxo said:
Yes to all of those.....and factory reset does not work in my case.
Click to expand...
Click to collapse
What output you are getting for this command when you boot into bootloader?
Code:
fastboot oem get-bootinfo
jjaxxo said:
Yes to all of those.....and factory reset does not work in my case.
Click to expand...
Click to collapse
U can try to factory reset from settings too
Yesterday I sideloaded the Android 12 Dev Preview 3 on my Google Pixel 3A. Enabled Developer options (did NOT! enable OEM unlocking, this wan't an instruction) and ADB. Sideloaded the file via Recovery.
Sideloading went fine, Stage 1 > Stage 2. Finished succesfull. Reboot device > Nothing.
'Can't find valid operating system. The device will not start.' Visit g.co/abh etc. (not very helpfull).
I can get in to fastboot. Devices state = Locked (ADB instructions didn't tell me to select this in developer options).
Can't boot into recovery, resque mode is also broken. Cannot use flash.android.com or pixelrepair.withgoogle.com. In my Country (Netherlands) the Phone isn't for sale officialy (only via grey import). My phone is from Germany. Can't get any Support from google or RMA it.
Any commands for flashing via fastboot are not allowed since flashing is not unlocked (it's stated above but i'll mention it again).
Softbricked and can't do anything. This is very sad.
Any tips?
Reading my own notes I would try to unlock the bootloader
- Hold power to reboot
- Press power to pause
- Hold volume-up + power to enter bootloader mode
If you can enter fastboot mode, try unlocking
fastboot devices
Should list a device...
fastboot flashing unlock
You will then have to use the phone to select yes to the unlock. you use the volume keys to select and the power button to confirm.
mulperi said:
Reading my own notes I would try to unlock the bootloader
- Hold power to reboot
- Press power to pause
- Hold volume-up + power to enter bootloader mode
If you can enter fastboot mode, try unlocking
fastboot devices
Should list a device...
fastboot flashing unlock
You will then have to use the phone to select yes to the unlock. you use the volume keys to select and the power button to confirm.
Click to expand...
Click to collapse
Ofc. thats what I tried first thing. Problem is there is no OS to boot into and to enable OEM unlock. That's also the reason pixel repair tool and flash.android.com do not work. Currently in contact with Google Netherlands to arrange an RMA. (The pixel phones aren't available in the Store here, so it's kind off a pain in the ass).
Hi, XDA!
I tried to fix my SM-A225F, and i need to unlock bootloader. But instead of unlock bootloader option, it shows Show Barcode. Someone please help me!
Idontknownicknameslol said:
Hi, XDA!
I tried to fix my SM-A225F, and i need to unlock bootloader. But instead of unlock bootloader option, it shows Show Barcode. Someone please help me!
Click to expand...
Click to collapse
Greetings...
I will try to help you...
First, you have to enable the Developer mode on your device, going to Settings >> About Phone >>> Software Information >>> Build Number. When you reach there, tap on it about 6-7 times until you get a message saying you unlocked the Developer's Mode.
View attachment 1-Enabling-developer-option.webp
Then you will have to go back to Settings again and look for Developer's mode at the bottom of the list.
When you get into this option, you will have to search for Enable USB Debugging and OEM Unlock options, so you will be able to proceed to the unlocking bootloader...
You must activate both, otherwise it will not show on the pre-download screen! If you get a popup warning, tap enable if you would like to proceed.
Now restart your device into Download mode, pressing Vol Up+Vol Down+Power Button or just Vol Up+Vol Down and insert your usb cable into the device. The usb cable must be connected on your computer first.
View attachment 4-Samsung-Galaxy-A22-Download-Mode.webp
After doing this, your device will go on Download mode and this screen will appear, pay attention carefully before press any key on you device....
After you do this procedure to press and hold Volume UP button, then it will show you another screen, like this...
Now you press Vol Up to unlock or Vol Down to give up and go back to normal.
If you choose Yes, your device will reboot and then will erase all informations and files you had into your phone and will perform a hard reset to factory default, and your bootloader will be unlocked.
If all were done correctly, this is the screen that will show for you from now on...
You're done. Your device is completely unlocked.
In any case, always have an original stock rom firmware of your device, so you can restore the original.
And if you want to lock it again, do the same steps again, but when you choose YES, it will do a hard reset again and go to factory install, erasing all again.
Remember to do a back-up of all your data and stuffs before you perform this.
I hope I had helped with this.
I unlocked the bootloader in the dev menu. And enabled debugging. And then when I use fast boot commands it's works like it should. It sends my tablet to a different menu and asks do you want to unlock bootloader Yes press up or no press down. So I press up and nothing happens at all. Press no and it takes me back to the menu. Even in recovery menu the up button doesn't work but when the tablet is on and fully booted the volume up works. So I don't know how to unlock my bootloader.