does anyone have a dump file for s7 t-mobile? - T-Mobile Samsung Galaxy S7 Questions & Answers

I had a hard brick phone, I need a dump file to install s7 with the box, does anyone have a dump file for s7 t-mobile?
i vey need it thank you

zuhriyan said:
I had a hard brick phone, I need a dump file to install s7 with the box, does anyone have a dump file for s7 t-mobile?
i vey need it thank you
Click to expand...
Click to collapse
Message me I can help you.

http://www.sammobile.com/firmwares/download/97135/G930TUVU4APIA_G930TTMB4APIA_TMB/ Download this.
Flash it in downloaded mode with this odin. It's attached as a zip file.
If its truly bricked. You can force restart your phone by holding volume down and power. Holding the menu button will put you into download mode.

boobteg2 said:
http://www.sammobile.com/firmwares/download/97135/G930TUVU4APIA_G930TTMB4APIA_TMB/ Download this.
Flash it in downloaded mode with this odin. It's attached as a zip file.
If its truly bricked. You can force restart your phone by holding volume down and power. Holding the menu button will put you into download mode.
Click to expand...
Click to collapse
but my s7 totally dead, cannot in into downloaded mode, i'll flash using jtag box, do you have the dump file or raw file for s7 t-mobile?
thank you

Related

Stuck on ATT World Phone screen

Phone is stuck on att white world phone logo and is not going to download mode by holding the volume buttons and power, and or volume down and power.
When i hold the buttons and plug it in and all i see is a damn battery that goes on then off. Odin is open and does seem change.
All this just to get some bloatware and fix a gps.
Try the third option which is the only one works for me:
1. Take battery out and put back
2. Hold both Vol buttons. Don't touch the power button.
3. Plug in the USB cable to your PC. Don't touch the power button.
Your phone should boot into download mode right away. Remember, don't ever touch the power button.
WOW
wow dude perfect you saved me from freaking out! hah SOLVED thanks a million bad power button!
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
foxbat121 said:
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
Click to expand...
Click to collapse
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Just do a search for captivate jig
kang0saur said:
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Click to expand...
Click to collapse
Look in my sig.
Entering Download Mode but odin not working
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
evedavis58 said:
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Here is the procedure you need to follow:
1. Install the proper driver so that ODIN can see your phone when plugged in. Drivers are listed in the thread where you download ODIN.
2. Open ODIN with phone not attached. Select the firmware file (*.rar) you want to flash in PDA field.
3. Power off the phone and enter into download mode and connect the phone to PC.
4. Wait for the driver to install and your phone recognized. It will show up in one of the boxes in ODIN.
5. Once your phone is recognized, press Start button on ODIN to start the flash process.
6. Leave the PC and phone alone for a few minutes and pray (that your phone didn't get bricked in the process).
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Cog does not use Odin. Just get clockwork recovery and install it. Then boot into recovery and flash cog. Go to stickies in dev section, there are guides.
I try to select cognition.rar but says it needs a .tar file. What do I do to make it work?
Cog does not install with Odin unless dg added that. You need to unrar it. Download winrar and extract it, see what's inside.
Sent from my Captivate using XDA App
This guide lays it out pretty well. http://forum.xda-developers.com/showthread.php?t=884364
Personally, here's what I use to do. Go to the Dev section and search for ClockworkMod Recovery. Search that thread for the update.zip. I'm sure it's in there. Put the update.zip on your internal storage, ie, when you plug phone into pc with USB the thing you mount and store file on, not an added SD card.
Boot into stock recovery. Choose reinstall packages, it reboots. Choose reinstall packages again, now your in Clockwork. Choose > install zip from sdcard > choose zip file > then navigate to Cognition (assuming you've put that on your internal storage also) and select it. It flashes, choose reboot. Bam! You're running Cognition.
evedavis58 said:
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
Click to expand...
Click to collapse
evedavis58 said:
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Click to expand...
Click to collapse
You two need to read more before risking your phone. I sense you soon to have two very expensive bricks on your hand.

[HELP]G920F XME bricked.

Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
ansh712 said:
Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
Click to expand...
Click to collapse
Download your stock firmware and flash using Odin.
maxal said:
Download your stock firmware and flash using Odin.
Click to expand...
Click to collapse
Doesn't work. It still gives me the same error. NAND Write FAIL.
ansh712 said:
Doesn't work. It still gives me the same error. NAND Write FAIL.
Click to expand...
Click to collapse
Are you using Odin 3.10.6?
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
mattlou said:
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
Click to expand...
Click to collapse
Same here looking for the G920FXXU1AOCZ 5.1.1 firmware. Can't find it anywhere.
roydok said:
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
Click to expand...
Click to collapse
There is no 5.1.1 firmware yet for G920FXXU1AOCZ. If you have a link or can upload one I'd be very grateful. Also I can flash any 5.1.1 G920FXXU1AOCZ firmware right?
From what country do come from or where you bought your S6?
---------- Post added at 08:04 AM ---------- Previous post was at 07:55 AM ----------
Based on the CSC (XME) you mentioned on your title you can try flashing this G920F 5.1.1 Malaysian ROM via Odin:
http://www.sammobile.com/firmwares/download/49468/G920FXXU2BOFO_G920FOLB2BOFF_XME/
I am in the UK and I bought it from O2
Here you go UK O2 5.1.1:
http://www.sammobile.com/firmwares/download/49735/G920FXXU2BOFJ_G920FTEF2BOF1_O2U/
I am in India bought it from Malaysia. My phone is XME-G920F. I was just able to flash another 5.1.1 ROM from another Asian region (XEF). Somehow that worked. Sadly now I have to fix region lock since I didnt make a call before leaving Malaysia.
Reflash using the Malaysian 5.1.1 posted above.
roydok said:
Reflash using the Malaysian 5.1.1 posted above.
Click to expand...
Click to collapse
Will that fix sim lock ?
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Sounds like you have a fake Chinese phone.
maxal said:
Sounds like you have a fake Chinese phone.
Click to expand...
Click to collapse
Yup, I do ha, downloaded phone info and checked.
ansh712 said:
Will that fix sim lock ?
Click to expand...
Click to collapse
One way to find out. Flash the Malaysian ROM.
---------- Post added at 10:28 AM ---------- Previous post was at 10:26 AM ----------
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Yup, might be a not so geniune S6...
roydok said:
One way to find out. Flash the Malaysian ROM.
Click to expand...
Click to collapse
I did flash the malaysian rom. Didn't fix it.
I'm all sorted now thank you. Just getting an annoying security notice every 5 minutes which is annoying.
Sent from my SM-G920F using Tapatalk

N920PSPT2BPD1_SPR tar

Hello pals,
I haven't see this around here but here is the original PD1 tar for sprint also you can root and do the same as the previous update.
how to install.
MAKE SURE YOU HAVE PLENTY OF BATTERY TURN OFF YOUR DEVICE.
Then press the vol down + power + home button. This puts you into “Download Mode”.
NOW plug your phone in and let Odin recognize it
Let’s click on the START button at the bottom of ODIN and DO NOT TOUCH ANYTHING ELSE ON THE SCREEN.
The phone will reboot and start up Android, and this is fine for this portion of the process.
It will reboot and you ready to go.
if you want to root again Installing TWRP the same way with odin reboot to recovery and install “SuperSU-v2.71-N920p.zip”
here is the link https://onedrive.live.com/redir?resid=3E9A804ADEC55F4B!1903&authkey=!AOLSW0GHJ3kUo0c&ithint=file%2czip
Screen shots this phone was with a bad ESN and is fully working on t-mobile.
kasey348 said:
Hello pals,
I haven't see this around here but here is the original PD1 tar for sprint also you can root and do the same as the previous update.
how to install.
MAKE SURE YOU HAVE PLENTY OF BATTERY TURN OFF YOUR DEVICE.
Then press the vol down + power + home button. This puts you into “Download Mode”.
NOW plug your phone in and let Odin recognize it
Let’s click on the START button at the bottom of ODIN and DO NOT TOUCH ANYTHING ELSE ON THE SCREEN.
The phone will reboot and start up Android, and this is fine for this portion of the process.
It will reboot and you ready to go.
if you want to root again Installing TWRP the same way with odin reboot to recovery and install “SuperSU-v2.71-N920p.zip”
here is the link https://onedrive.live.com/redir?resid=3E9A804ADEC55F4B!1903&authkey=!AOLSW0GHJ3kUo0c&ithint=file%2czip
Click to expand...
Click to collapse
Thanks, btw where did you get this, is this firmware downloaded from sammobile, and pls add the md5 check, its a very big file anyway.
tks again
su660ics said:
Thanks, btw where did you get this, is this firmware downloaded from sammobile, and pls add the md5 check, its a very big file anyway.
tks again
Click to expand...
Click to collapse
Is the complete tar compressed on the new updates all the file are almost 2 gigs.
Pd2?
Sent from my SM-N920P using XDA-Developers mobile app
Link is broken. :{ Anyone have a mirror?

[HELP!!] Hardbrick after installing TWRP

Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
mlrinoc said:
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Click to expand...
Click to collapse
Already tried that, like i said.. after downloading firmware it doesn't recognize my phone.
force70 said:
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
Click to expand...
Click to collapse
i have the SM-G955F
Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
This - you probably have the newer AQG5 bootloader, which TWRP doesn't support yet.
So follow the instructions above, flash back to the previous bootloader, the you'll be able to flash TWRP ok.
Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
I had the same issue once before. What the fail device info. I think I fixed it by using the most recent update (I think). And messing around with csc files. All this was done half assed in desperation. Then went back to the unlocked firmware and stopped messing with it. Yes Smart switch didn't do crap. Use updato.com to obtain your firmwares
Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
Just got home and tried this! and OMG dude this actually worked! thanks!!! damn im glad my phone works again! thanks thanks thanks!! cant say it enough!!
My guide to fix the issue
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-flash-fail-fixed-solutions-t3650073

Please help!! Bricked using odin

HI,
Tried updating TWRP using odin and stupidly loaded the file into CP instead of AP !!!
Now my S8+ just stays in the first ..powered by android... screen and wont go any further obviously...tried getting back into download mode but it just isn't happening, please guys can anyone help me out on this one...is there any way to fix this in any other way???
Thanks Ga
Ga73 said:
HI,
Tried updating TWRP using odin and stupidly loaded the file into CP instead of AP !!!
Now my S8+ just stays in the first ..powered by android... screen and wont go any further obviously...tried getting back into download mode but it just isn't happening, please guys can anyone help me out on this one...is there any way to fix this in any other way???
Thanks Ga
Click to expand...
Click to collapse
This will probably work: https://www.youtube.com/watch?v=9QhJngOuLQ4&t=406s
Edit: Hold down volume down and power button to restart phone and when you see it restarting hold bixby+volume down and power fast to get to download mode.

Categories

Resources