Database Info

Nexus s problem while unlocking bootloader

I was unlocking the bootloader so i could root the phone. I was successful but now my phone is stuck on the google screen with the unlocked pad at the bottom.
Through the forum i found that i'm missing the boot image so i found that.
I pulled in my phone to the computer and typed "fastboot flash boot test_boot.img". it comes up with "error: cannot load test_boot"
The same thing happened when i tried to "fastboot flash recovery recovery.img" aswell to try and fix it that way but the same error came up.
I made sure the file names were correct.
Please help!!

bozo089 said:
I was unlocking the bootloader so i could root the phone. I was successful but now my phone is stuck on the google screen with the unlocked pad at the bottom.
Through the forum i found that i'm missing the boot image so i found that.
I pulled in my phone to the computer and typed "fastboot flash boot test_boot.img". it comes up with "error: cannot load test_boot"
The same thing happened when i tried to "fastboot flash recovery recovery.img" aswell to try and fix it that way but the same error came up.
I made sure the file names were correct.
Please help!!
Click to expand...
Click to collapse
fastboot clockwork recovery then flash a rom.

I would flash clockwork but when i put the file into my SDK tools folder and then use CMD to try and flash it but i got an error. Details are in my first post.
Please help!

bozo089 said:
I would flash clockwork but when i put the file into my SDK tools folder and then use CMD to try and flash it but i got an error. Details are in my first post.
Please help!
Click to expand...
Click to collapse
do you have the recovery.img file in the same folder as fastboot?

simms22 said:
do you have the recovery.img file in the same folder as fastboot?
Click to expand...
Click to collapse
Yeah its in there.
Also, when i typed adb devices it only says "see devices attached" not the serial number.

bozo089 said:
Yeah its in there.
Also, when i typed adb devices it only says "see devices attached" not the serial number.
Click to expand...
Click to collapse
do you have the proper drivers installed? if not, go directly to PdaNets website http://junefabrics.com/android/ and have it install the proper drivers onto your computer. this way is by far the easiest way to install the drivers. download and install the free program then just follow the directions on the screen.

simms22 said:
do you have the proper drivers installed? if not, go directly to PdaNets website http://junefabrics.com/android/ and have it install the proper drivers onto your computer. this way is by far the easiest way to install the drivers. download and install the free program then just follow the directions on the screen.
Click to expand...
Click to collapse
I do have that installed. I used it to unlock the bootloader. Im trying to reinstall it using the link you provided but the phone doesn't turn on so i dont think it will work. Now in the fastboot screen on my phone it says fastboot status -FAILinvalid command

bozo089 said:
I do have that installed. I used it to unlock the bootloader. Im trying to reinstall it using the link you provided but the phone doesn't turn on so i dont think it will work. Now in the fastboot screen on my phone it says fastboot status -FAILinvalid command
Click to expand...
Click to collapse
Update: the FAILinvalid part went away but i think i might have uninstalled the pdaNet when trying to reinstall it.

bozo089 said:
Update: the FAILinvalid part went away but i think i might have uninstalled the pdaNet when trying to reinstall it.
Click to expand...
Click to collapse
OK, i did a system restore and now i have pdaNet back. I have no idea how to use it or what to do next.
Please help!
EDIT: when i typed "fastboot devices" into CMD, it shows my device!

take a screenshot of your /sdk/tools folder.
(seriously do it).
OR if you don't want to.. does fastboot appear as "fastboot" or "fastboot.exe" ?

Uploaded with ImageShack.us
There you go

bozo089 said:
Uploaded with ImageShack.us
There you go
Click to expand...
Click to collapse
Okay, yeah. I see the problem, your extensions are hidden "recovery.img" is actually "recovery.img.img" so you're fastbooting a invalid file. What I want you to do is on the top left of a Windows explorer, it says Organize. Press that and go to folder options -> view -> hide extensions for known file types (UNCHECK THIS). Rename recovery.img.img so it appears as recovery.img not recovery.img.img
Put your phone in bootloader mode if it isn't already with USB plugged in.
The phone needs to be in bootloader mode in order for it to recognize the fastboot command.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^ appears as that.
through command prompt
cd C:\android-sdk-windows\tools\
(optional -- do this if your phone isnt in bootloader mode) adb reboot bootloader
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
and you're set. click on "thanks" if this helped you!

wow, ok so it says writing and sending went "OKAY". I assume that means it worked.
I really don't know what to do now. How do i access the clockwork menu and how do i install a ROM?

bozo089 said:
wow, ok so it says writing and sending went "OKAY". I assume that means it worked.
I really don't know what to do now. How do i access the clockwork menu and how do i install a ROM?
Click to expand...
Click to collapse
yeah that meant it worked. you can access clockwork menu by going down to RECOVERY in the menu or "adb reboot recovery"
you install a ROM by...
1. Shop around the Dev forums and look for what ROM you want to use. I personally use CM7.
2. Use netarchy's kernel (its worth it).
Steps:
1. Put ROM onto your sdcard
2. Boot into Clockwork Recovery (told you above on how to do it)
3. Wipe Factory, Dalvik, Cache
4. Flash ROM (Proceed to flash CM7 Gapps afterwards if you decide to go with CM7)
5. Flash Kernel (Optional)
6. Reboot!

Ahhh, i updated without looking at your post first. Can i put the kernal on now that ive rebooted?
thank you for your help and time

[Guide] Android Star B92M CWM + 2.5G DATA + ROOT

First of all, all props goes to the OP of this thread. This is merely a step-by-step detailed guide on the process since there were a lot of members complaining that the steps were unclear.
- Download the following and extract all the files:
MT6577 USB VCOM drivers (link: http://www.mediafire.com/?2sf30pboet4qvov)
SP Flash Tool v3.1224.01.rar (link: http://www.mediafire.com/?h68v8yhhtci8h0e)
CWM-ROOT-B92M.zip (link: http://www.mediafire.com/?8o2yx9ssz1abwon)
2.5gb-data-perm-root.zip (link: http://www.mediafire.com/?4wg5f6rgat8qdrt)
- Install the MT6577 USB VCOM drivers drivers
- Inside the 2.5gb-data-perm-root folder make sure the files have the following names (CASE SENSITIVE!):
recovery.img
EBR1.img
boot.img
logo.img
MBR.img
preloader.img
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Turn off your phone and unplugg the USB cable
- Start SP Flash Tool
- Under options in the menubar check "USB mode"
- Under File in the menubar click on "Open scatter-loading file" and select MT6577_Android_scatter_emmc.txt from the CWM-ROOT-B92M folder
- Double click the following rows inside SP Flash Tool:
PRELOADER and select preloader.img (from 2.5gb-data-perm-root folder)
MBR and select MBR.img (from 2.5gb-data-perm-root folder)
EBR1 and select EBR1.img (from 2.5gb-data-perm-root folder)
BOOTIMG and selet boot.img (from 2.5gb-data-perm-root folder)
RECOVERY and select recovery.img (from 2.5gb-data-perm-root folder)
LOGO and select logo.img (from 2.5gb-data-perm-root folder)
You should have the following then:
- Click on "Download" inside SP Flash Tool
- Take out the battery of the phone
- Put the battery in
- Connect USB cable with your computer
- The bar at the bottom of SP Flash tool should go to 100% a few time and present you with a green circle when done
- Done flashing, hit volume up + power to start up CWM and make a backup
I hope this detailed guide helps everyone out
~Whookid
Disclaimer: Messing around with your phone can be fun but can also cause damage to your phone. I am in no way responsible for anything that you do. I am merely sharing what I managed to do.

Red triangle
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?

What ROM can you use with this ?

Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.

first thanks for the guide!!!
but u should add this to make root working
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75

I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2

Whookid said:
I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2
Click to expand...
Click to collapse
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there

bonecrusher2010 said:
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?
Click to expand...
Click to collapse
Did the flashing went ok (Green circle at the end?)
********er said:
What ROM can you use with this ?
Click to expand...
Click to collapse
Any ROM that you can find that is compatible with the Star B92M.
steelburn said:
Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.
Click to expand...
Click to collapse
Yeah, to avoid confusion I made everyone rename the files according to the first post.
android_xcuj28 said:
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there
Click to expand...
Click to collapse
Ok good to know, thanks for the input

Broken touch screen Star B92m
i broke the touch screen of B92m
Where can i find new one and how can i change it?

andys312 said:
i broke the touch screen of B92m
Where can i find new one and how can i change it?
Click to expand...
Click to collapse
Your best option is to contact the seller and ask him for more information about this.

After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?

Make sure you have an external sd-card inserted in the phone. It should automatically be mounted to /sdcard/ where you should have enough space to store your camera photos.
Sent from my B92 using Tapatalk 2

What charger are you using and how fast/slw will it charge a empty battery?
Mine takes for ever (8hrs from 0%), the charger fastcardnet send me, but also a standard usb charger i got.

I'm just using the default micro USB chargers I have laying around. I never charge via a computer (USB) though.
Sent from my B92 using Tapatalk 2

@Whookid
Yes worked!

Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz

bvb09kingz said:
Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz
Click to expand...
Click to collapse
Try flashing again and Superuser should be working. Once flashed I suggest you start the play store and you'll see that there is an update available.
About the Wi-fi: that's something computer related so don't know for sure about that one. I just Googled and came across this website:
http://www.connectify.me
Sent from my B92 using Tapatalk 2

steelburn said:
After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?
Click to expand...
Click to collapse
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.

Amjadov said:
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.
Click to expand...
Click to collapse
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75

android_xcuj28 said:
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
Click to expand...
Click to collapse
When I first did the root I did not the su.zip step so I booted my phone and it informed me that my internal SD card is damaged amd asked me if I wanted to format it, I clicked yes and then it became 83 MB, I did the root again and flashed su.zip too, I also tried to format the internal SD card but it is still 83 MB.
I think I need to reformat with specifying the new size, how can I do that?

[Q] how to unbrick? sdcard wont show in win/osx

so i manged something incredible, i managed to format my sdcard in CWM, was ment to click format/system but didnt doubble check and clicked format/sdcard. so now i have no backups and i already wiped everything else so i dont have any system to boot into. was trying ubuntu so not that it would help to much i think.
but now i cant even get the sdcard to show up. i boot up into CWM recovery and go to mount usb storage (mounts and storage/mount USB storage) but nothing comes up on either win7 or osx. in win7 i get an error could not find drivers to install device.
do i need the android SDK to get the drivers? if i just could get a CM10 image or somthing on there it would be good.
btw this is my backup device so im not in a hurry to fix this. was just curious on how ubuntu felt, so tried that and was a little to quick on the trigger when formating.

larsenfaen said:
so i manged something incredible, i managed to format my sdcard in CWM, was ment to click format/system but didnt doubble check and clicked format/sdcard. so now i have no backups and i already wiped everything else so i dont have any system to boot into. was trying ubuntu so not that it would help to much i think.
but now i cant even get the sdcard to show up. i boot up into CWM recovery and go to mount usb storage (mounts and storage/mount USB storage) but nothing comes up on either win7 or osx. in win7 i get an error could not find drivers to install device.
do i need the android SDK to get the drivers? if i just could get a CM10 image or somthing on there it would be good.
btw this is my backup device so im not in a hurry to fix this. was just curious on how ubuntu felt, so tried that and was a little to quick on the trigger when formating.
Click to expand...
Click to collapse
Which version of CWM are you using? Versions more recent than 6.0.1.0 have trouble mounting the SD card.

polobunny said:
Which version of CWM are you using? Versions more recent than 6.0.1.0 have trouble mounting the SD card.
Click to expand...
Click to collapse
damn, just updated before doing all this and i know im on 6. something so this sucks...

larsenfaen said:
damn, just updated before doing all this and i know im on 6. something so this sucks...
Click to expand...
Click to collapse
6 what? That's what's important. You can connect your phone and reflash to an older version using fastboot, such as v5.0.8.2 which is very stable and can mount the USB storage. Then you can transfer a rom to your sd and install it.

polobunny said:
6 what? That's what's important. You can connect your phone and reflash to an older version using fastboot, such as v5.0.8.2 which is very stable and can mount the USB storage. Then you can transfer a rom to your sd and install it.
Click to expand...
Click to collapse
6.0.2.5.
but i get driver error in fastboot aswell. missing android 1.0 drivers so trying to figure that out now.

larsenfaen said:
6.0.2.5.
but i get driver error in fastboot aswell. missing android 1.0 drivers so trying to figure that out now.
Click to expand...
Click to collapse
I've had good luck using PDA.net Android drivers.
http://pdanet.co/

polobunny said:
I've had good luck using PDA.net Android drivers.
http://pdanet.co/
Click to expand...
Click to collapse
yeah seems downloading the android SDK and installing USB drivers, + restarting PC and pointing device manager to driver location is not enough. just get could not install drivers.
gonna try your link now

polobunny said:
I've had good luck using PDA.net Android drivers.
http://pdanet.co/
Click to expand...
Click to collapse
well, i am getting a nexus s up in devices, but no storage. tried to mount storage in CWM too but nothing.no removable or anything. im starting to think this phone is dead :crying:

larsenfaen said:
well, i am getting a nexus s up in devices, but no storage. tried to mount storage in CWM too but nothing.no removable or anything. im starting to think this phone is dead :crying:
Click to expand...
Click to collapse
That android 1.0 thing is a driver issue. .... Happened to me once when i was setting my adb fastboot folders and drivers again . ..you should really use the pda driver
You will not see the missing driver android 1.0 after ....
And when your drivers are set.... Try a factory image in fastboot...or...my worst case scenario...odin.
Sent from my Nexus S using xda app-developers app

larsenfaen said:
yeah seems downloading the android SDK and installing USB drivers, + restarting PC and pointing device manager to driver location is not enough. just get could not install drivers.
gonna try your link now
Click to expand...
Click to collapse
As I said you need to flash a previous version of CWM. 6.0.2.5 won't mount your SD card. Nowt hat your phone gets detected properly in device manager, fastboot will see it, so you can flash 5.0.8.2 or 6.0.1.0 to your phone. Then you can mount the SD.

how are you not getting this. the phone is dead, i have no OS on the phone, i managed to wipe everything. OS SD card etc. now i cant get into my SD card when connecting to computer.
doesn't matter if im in fastboot or CWM in fastboot my computer recognizes an android 1.0 device. CWM a nexus s device. but nothing more. cant for the life of me figure out how the hell im supposed to get a firmware on to the phone, if i could get into sd card i could jut do it from CWM but no luck..
exactly how im i supposed to just flash CWM to 5.0.8.2? explain like im 5! remember cant do it from android OS since that doesn't exist on the phone, and cant do it from SD-card since that is a no show.

larsenfaen said:
how are you not getting this. the phone is dead, i have no OS on the phone, i managed to wipe everything. OS SD card etc. now i cant get into my SD card when connecting to computer.
doesn't matter if im in fastboot or CWM in fastboot my computer recognizes an android 1.0 device. CWM a nexus s device. but nothing more. cant for the life of me figure out how the hell im supposed to get a firmware on to the phone, if i could get into sd card i could jut do it from CWM but no luck..
exactly how im i supposed to just flash CWM to 5.0.8.2? explain like im 5! remember cant do it from android OS since that doesn't exist on the phone, and cant do it from SD-card since that is a no show.
Click to expand...
Click to collapse
If you're going to get aggressive I won't go on and help you.
As I wrote: fastboot
http://wiki.cyanogenmod.org/w/Doc:_fastboot_intro#Installing_recovery_using_fastboot
The fact the OS doesn't boot is irrelevant. Instead of downloading the whole Android SDK, you can get fastboot and adb from here:
http://dottech.org/downloads/adb_fastboot_and_other_tools.zip
Turn your phone off. Then hold VOL + and press POWER. Brings you to fastboot menu, where it shows 4 menus and a green Andy in the background
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On this screen, you can use fastboot as described in the link above to flash a custom recovery. Your phone needs to be connected via USB, and the drivers installed (PDA.net drivers were for that)
The command is pretty straight forward:
fastboot flash recovery your_recovery_image.img
your_recovery_image.img being the file you want to flash.
Suggested recoveries:
CWM 5.0.8.2 or 6.0.1.0.
So once you're done flashing your recovery, you can reboot, this time to recovery. From there, as mentioned earlier, you can mount your USB storage, transfer a rom, and so forth.

Eui 5.8 17s Marshmallow 6.0 Indian for X500/ X507, TWRP method [ GUIDE ]

]Hi, Guys, looking for update to Eui Marshmallow 5.8 17s, but unable to do so because of custom rom, root, unlocked bootloader & also don,t want all that hassle to go back to stock rom, recovery etc, just want regular twrp flash, then here we go,
Requrements:
1. Eui 5.8 17s Stock Rom
Link: http://forum.le.com/in/eui_detail.html?euiid=208#
2. Twrp 3.0 & above ( Considering u unlocked bootloader, Rooted, Twrp Installed)
Link: http://bit.ly/2dhyzSQ
3. updater-script
Link: http://bit.ly/2crl1hs
Good practice: Always Backup ur Full Rom in Twrp
Preparing Zip:
1. Now Double click on Downloaded zip & open it, Do not extract
2. Go META-INF/com/google/android
3. Add downloaded Updater-script with winzip option at left top corner, it will replace ur existing script file.
4. Copy Zip file to internal storage
Thats it, ready for flash
Twrp Flashing:
1. boot into recovery using system update menu
2. Wipe everything except internal storage ( or u can also wipe that too)
i kept it because of all data, so it doesnt matter or also u can upgrade on existing rom without wiping anything,
no matter what it will work
3. flash zip, be patient, its big rom, it will take time
4. After Finish, wipe cache / dalvik, reboot, Twrp will show No os installed, ignore it & reboot
5. After reboot, may be or may be not u will find Orange Status, that ur bootloader is unlocked, device canot be trusted, Dont scare, it will reboot.
6. If booting takes lot of time then switch off device by keep pressing power button for 10sec
7. reboot again rom will start optimizing apps
& There u go UR in EUI 5.8 17S Marshmallow
-----------------------------------------------------------------------------------------------------------------------------------------------------
Recommendation: Better Do clean install with all wipes
-----------------------------------------------------------------------------------------------------------------------------------------------------
Thanks
For any queries, pls comment,
Happy to help u Always...

i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??

avishek83 said:
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
Click to expand...
Click to collapse
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install

transistor_101 said:
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
Click to expand...
Click to collapse
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?

avishek83 said:
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
Click to expand...
Click to collapse
Factory restore, even leforum recommend to do so after update, back up data n restore.

It didn't worked for me
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me

mkmks211 said:
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
Click to expand...
Click to collapse
Are u sure that u replaced updater-script properly.
Better extraxt full rom n replace script file, zip it again n then try flashing
Hope this will work

Let me try
okay let me try this
---------- Post added at 11:41 AM ---------- Previous post was at 11:06 AM ----------
thanks man it worked for me . you made my day , keep doing :good:

can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery

Ztsanga said:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Click to expand...
Click to collapse
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom

transistor_101 said:
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
Click to expand...
Click to collapse
because im selling my phone and i need to put everthing as it is

how to change the update script as .zip file is not opening
plz help

mr.shadow said:
how to change the update script as .zip file is not opening
plz help
Click to expand...
Click to collapse
U need to open rom zip file, not script file as zip, double click on zip file it will open, then replace updater script,better use second method for replacing script file.

Bricked!
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:

oodles1916 said:
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
Click to expand...
Click to collapse
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?

transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
Thank you for your reply! Unfortunately, my computer is not detecting my phone when its plugged in, is there any solution to this? Thanks again for your assistance...

download mtk drivers n install it, & for sp flash to work, device needs to be in switched off n disconnected from pc, u need to connect device after u hit download button.

transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
I've followed your instructions, nothings seems to be happening, I'm seeeing this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do you think I'm doing wrong?

Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/

transistor_101 said:
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
Click to expand...
Click to collapse
Sorry, heres a link to the photo: http://imgur.com/gallery/wvlS6
Yeah, I tried that on a Win 7 laptop, the phone still isn't detected, I think I'll have to pop the battery, going to have to get a heatgun tomorrow!

[TOOL][BERYLLIUM] TOOL ALL IN ONE (Drivers|TWRP|Factory Image|Stock Recovery)

This is the Xiaomi PocoPhone F1's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working

Whoa... It's here already... Gonna make life easier for a lot of people like me ^_^
Thanks for the efforts ? Much Love.

Nice thing

mauronofrio said:
this is the xiaomi pocophone f1's tool all in one discussion thread more info and download go to the original thread
tool all in one
advanced options
functions
install drivers
unlock bootloader
lock bootloader (use carefully)
flash twrp recovery
flash stock recovery
flash stock factory image
install apks
uninstall apks
take a screenshot
flash partitions
erase all data (this function can decrypt the phone)
reboot phone
update the tool to latest version
update adb and fastboot to latest version
set adb and fastboot priviliges in system wide
install zip directly from pc (required twrp on phone)(these functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect twrp on my phone)
flash fastboot rom
delete downloaded files
adb file manager
device list
if you want you can send a request to add a new device here:
new device request form
device list
download
original thread
donate link
if you want to support the project please consider making a donation, thanks.
​
Click to expand...
Click to collapse
thank you very much it was much awaited tool .

bravo2526 said:
thank you very much it was much awaited tool .
Click to expand...
Click to collapse
Please don't quote the OP.
Sent from my POCO F1 using XDA Labs

Good tool. Please do make provision to select multiple apps at a time under 'install apk' option. Otherwise it is difficult to select a single app, then waiting it to install and then selecting the next app then waiting and so on...

mauronofrio said:
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
Click to expand...
Click to collapse
EDL too?

itsmuhammedmuneer said:
Good tool. Please do make provision to select multiple apps at a time under 'install apk' option. Otherwise it is difficult to select a single app, then waiting it to install and then selecting the next app then waiting and so on...
Click to expand...
Click to collapse
Good idea, i will do it

mauronofrio said:
Good idea, i will do it
Click to expand...
Click to collapse
Happy to hear that

Boot to edl working?

Puneeth 676797 said:
Boot to edl working?
Click to expand...
Click to collapse
I have not tested it

How to root using this tool? I select root after flashing the recovery but it just flashes the recovery and boots into it. What's the next step?

jperkovic said:
How to root using this tool? I select root after flashing the recovery but it just flashes the recovery and boots into it. What's the next step?
Click to expand...
Click to collapse
Have you choose the magisk version? Can you see when you are in TWRP the device is recognized in adb mode?

itsmuhammedmuneer said:
Happy to hear that
Click to expand...
Click to collapse
Updated the tool with a new Apk Installer that support multiple apk install at the same time

mauronofrio said:
Updated the tool with a new Apk Installer that support multiple apk install at the same time
Click to expand...
Click to collapse
Wow...!!! Thanks for hearing. I wil test and report.:good:

mauronofrio said:
Updated the tool with a new Apk Installer that support multiple apk install at the same time
Click to expand...
Click to collapse
I was busy for a while and I tested it.
Cannot install apks as bulk (30+ apks) by selecting all. I tried to install 68 apks at time, failed, again tried half of it, failed.
No issues with 20-25 apks.
Please do have a note of it and try to fix it.

itsmuhammedmuneer said:
I was busy for a while and I tested it.
Cannot install apks as bulk (30+ apks) by selecting all. I tried for install 68 apks at time, failed, tried half of it, failed.
No issues with 20-25 apks.
Please do have a note of it and try to fix it.
Click to expand...
Click to collapse
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?

mauronofrio said:
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
Click to expand...
Click to collapse
No response after selecting the apks. Usually a command window should open, but not in this case. Installing is shown only for a fraction of second and then it disappears and back to "Install selected Apks".

mauronofrio said:
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
Click to expand...
Click to collapse
No issues with 25+ apks. Try with 50+apks.