Hello there,
i have a serious problem with my phone(redmi note prime dual sim)
*It doesn't go to fastboot(when power and vol- pressed simultaneously )
*No LED blinking when charging
.It doesn't switch on no matter how long you press the power button
when connected to computer, it is detected, but the device manager shows these words
(QHSUSB_BULK)
If install mi-flash is tool installed and the phone is connected to the computer,
(qualcomm HS-USB QDLoader 9008(COM10)
(i guess the mi flash tools comes with some qualcom drivers)
when i try to flash it i get this error
(reached the end of the file.(0x80070026: receiving hello packet))
i badly need this device to work, if there is anything i can do please guys let me know
cctowers said:
Hello there,
i have a serious problem with my phone(redmi note prime dual sim)
*It doesn't go to fastboot(when power and vol- pressed simultaneously )
*No LED blinking when charging
.It doesn't switch on no matter how long you press the power button
when connected to computer, it is detected, but the device manager shows these words
(QHSUSB_BULK)
If install mi-flash is tool installed and the phone is connected to the computer,
(qualcomm HS-USB QDLoader 9008(COM10)
(i guess the mi flash tools comes with some qualcom drivers)
when i try to flash it i get this error
(reached the end of the file.(0x80070026: receiving hello packet))
i badly need this device to work, if there is anything i can do please guys let me know
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please consider posting your question here:
http://forum.xda-developers.com/android/help
You'll receive expert advice there.
Good luck!
Related
I tried to install new firmware for my lumia 820 then my home's electric is going down when it installing , My phone stuck in installation screen so i put off battery then it not boot anymore but when i connected my phone to pc my pc say it have usb connection but in product support tool it not see any connection. It cannot press volume down + power button too
Please help me to fix it , Thank you and sorry for my bad english
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
Hi mate, am in exact same situation as yours.
Did you have any luck fixing it?
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
sid_844 said:
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
First of all thanks for your reply.
I have seen this thread but as you can see to uninstall the old driver I need to:
' Go to Device Manager, right click on the bricked USB device (QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008) and go to Properties, click on Driver, then select Uninstall. Check the box to remove driver files, if prompted...'
But the device is not seen by the device manager.
Someone suggested in an other thread that I need just to press (not hold) power + volume button.
I will try that and let you know.
By the way what is 'test mode'?
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there
Hello at all, i have flash the official china devoloper rom on Xiaomi Mi4S thanks to adb and MiFlash.
At finally MiFlash indicate that the process has been successful, but, i try to start my phone and does not work, it can't go in fastboot, recovery and can't charge!!
If i connect my phone on pc it is recognized as: Qualcomm hs-usb qdloader 9008 (com10), MiFlash detect the phone, but adb does not detect it. I have try to press for more than 10 seconds the power button with the succession of volume + and - buttons, but nothing...
When I connect the phone to the computer you hear the sound of when a device is detected, when I hold down the power button you hear the sound of a device that is disconnected from windows, and then connect automatically
Sorry if i'm bad to speak english but there is sameone that can help me?
I'm desperate :crying:
If your phone is detected as Qualcomm 9008, you can flash it with miflash.
Download the latest "fastboot rom" for your phone here. Extract that until you can see a folder called "images" inside it, open MiFlash, browse to the extracted folder (not the images folder, but above it), choose "flash all" at the bottom of the app, and hit refresh.
If your phone is indeed detected, proceed to hit flash.
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
UP
UP
eyznec said:
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
Since there is no information about harbricked Acer Z330 on XDA, I sugedt you put your question on Questions and Answers to see if any member has a solution for your problem.