Hello at all, i have flash the official china devoloper rom on Xiaomi Mi4S thanks to adb and MiFlash.
At finally MiFlash indicate that the process has been successful, but, i try to start my phone and does not work, it can't go in fastboot, recovery and can't charge!!
If i connect my phone on pc it is recognized as: Qualcomm hs-usb qdloader 9008 (com10), MiFlash detect the phone, but adb does not detect it. I have try to press for more than 10 seconds the power button with the succession of volume + and - buttons, but nothing...
When I connect the phone to the computer you hear the sound of when a device is detected, when I hold down the power button you hear the sound of a device that is disconnected from windows, and then connect automatically
Sorry if i'm bad to speak english but there is sameone that can help me?
I'm desperate :crying:
If your phone is detected as Qualcomm 9008, you can flash it with miflash.
Download the latest "fastboot rom" for your phone here. Extract that until you can see a folder called "images" inside it, open MiFlash, browse to the extracted folder (not the images folder, but above it), choose "flash all" at the bottom of the app, and hit refresh.
If your phone is indeed detected, proceed to hit flash.
Related
How to set "usb debugging" on my softbricked phone.
My phone shows as "android phone ->android composite adb interface" in device manager.
When I try open command windows and type : "adb devices" at platform tool it not shows my device.
I've installed adt bundle and qualcomm driver on my win 7.
I tried install pda net-32 bit but I failed because pda net doesn't find my device.
I can not enter to recovery mode by press power + vol up it stuck on the red screen with little word "recovery" at right up at the screen, just it.
By pressing power + vol down it just show boot logo.
Can I make it show as usb mass storage devices other than android phone in device manager? So I can flash my backup rom.
I try search related topic in this forum but my problems is different.
I hope somebody like to teach me to solve my problem. :crying::crying::crying:
Thanks in advance
as i know Your phone should must be open in download mode to flash rom
if you are not able to open download mode then you cant do anything
that sucks
damn that sucks:crying:
Solved: See post below.
So I decided to go back to Kitkat from Lollipop. To do this I went into TWRP and restored a 38R backup I made when I first got the phone in November. TWRP did its thing and booted back into 11S 38R and it seemed to work. What then happened was that I was prompted to update to 44S so I did and the phone rebooted into TWRP. TWRP came up with some sort of screen, I can't remember what it said but the last line said something about an MD5 check not beeing needed. It then turned off and I haven't been able to get it back on. I've tried holding down the power button on its own and after around 5 seconds it vibrates but nothing happens. Also when I plug it into my PC or charger the charging light doesn't turn on.
I've tried to get into recovery and fastboot mode by holding power button+up/down volume but nothing happens on screen but I still get a vibration. However when I press volume button up+power button it seems to be recognised in Windows and it brings up the device as "QHSUSB_BULK" but that is it.
Does anyone know how to fix this?
P.S: I've got a nandroid backup + modem backup from when I first got the phone available if that helps.
I was able to fix the issue using the Oneplus Recovery tool. The issue was that the phone was not being recognised by my PC despite installing the drivers included in the recovery tool. This post in the recovery tool thread had the answers:
"I also deactivate unsigned driver installation but still same fail... I found a Qualcomm HS-USB QDLoader 9008 2.1.0.5 for Windows 7 that I used. I opened the Device Manager, I found my device named QHSUSB_BULK with an yellow triangle. I pressed udate drivers , choose from computer and installed that Qualcomm HS-USB QDLoader 9008 2.1.0.5 I donwloaded. AFTER THAT the tool found my phone and I was manage to flash ROM took me half a day. I cant have done wrong , somethnig must be wrong with the drivers in the tool for w7 64bit or something . this was the first time I have hard bricked a phone EVER and I have flashed a lot . But im glad it worked out with that Qualcomm HS-USB QDLoader 9008 driver since that guy also had same problem as me and later got it to work with that driver. Qualcomm HS-USB Drivers"
http://forum.xda-developers.com/showpost.php?p=58074662&postcount=40
So that was how I fixed it.
Why it broke in the first place is a mystery but I'm just glad to be back on Kitkat 44S.
hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first
Hi,
My oneplus 8 is notshowing the Qualcomm HS-USB QDLoader 9008 in device manager,therefore i can't usethe unbrick tool,any help or advice please
Install the latest Qualcomm drivers
GraveDigger176 said:
Install the latest Qualcomm drivers
Click to expand...
Click to collapse
Where from please
stavros67 said:
Where from please
Click to expand...
Click to collapse
From this thread............https://forum.xda-developers.com/oneplus-8/how-to/op8-unbrick-tool-to-restore-device-to-t4085877
GraveDigger176 said:
From this thread............https://forum.xda-developers.com/oneplus-8/how-to/op8-unbrick-tool-to-restore-device-to-t4085877
Click to expand...
Click to collapse
Hi,
I press volume up & volume down together,insert cable to pc,the phone is not showing up on device manager,and sometimes the phone goes into fastboot mode?
USB debugging enabled on your phone ?
GraveDigger176 said:
USB debugging enabled on your phone ?
Click to expand...
Click to collapse
Yes,it will not show up Qualcomm HS-USB QDLoader 9008 in device manager,seems to make no difference what drivers i download,seem convinced there is something not right with the phone.
That's right what it shows QDLOADER 9800 what phone you tmo or international\india version
Use different pc or laptop
GraveDigger176 said:
That's right what it shows QDLOADER 9800 what phone you tmo or international\india version
Use different pc or laptop
Click to expand...
Click to collapse
I have the oneplus 8,i have tried a different pc,with the same results.Both pc's recognise the phone,and i can transfer files accross,it will just not show QDLOADER 9800 in device manager.
The phone must be completely shutdown before the cable is inserted.
1: power phone down
2: start your msm app and have it ready
3: hold both volume up and down at the same time and do not release
4: plug USB cable (that is already attached to the PC) into the phone
Your phone will not show any indication that it has powered but you should see it in the MSM tool as well as the device manager.
Juxto2010 said:
The phone must be completely shutdown before the cable is inserted.
1: power phone down
2: start your msm app and have it ready
3: hold both volume up and down at the same time and do not release
4: plug USB cable (that is already attached to the PC) into the phone
Your phone will not show any indication that it has powered but you should see it in the MSM tool as well as the device manager.
Click to expand...
Click to collapse
Have tried this countless times on two different pc's,it does not show up on msm or device manager.Also the when pressing and holding said buttons the phone will sometimes go into fastboot mode.
Try the following, power up your phone let it boot, if is finish with booting plug in your phone with the USB cable and look whether USB debugging is showing in status bar at the left bottom of the screen. If it shows USB debugging open CMD command window and type "adb reboot edl" and see what happens. Before you should start your msn tool that you can tap the enrum button maybe this works
Sorry,bottom of which screen
The phone shows in device manager when powered on and connect to the usb cable as " universal Serial Bus devices - IN2013,then when i try and go into edl mode the device manager does not see it's connected.
please read title and help
restore it with msm tool
how to connect the phone screen is black
If the screen is black it may already be in EDL mode. Plug it into a computer and check device manager for something like "Qualcomm HS-USB QDLoader." If that's there, you just need to get the MSM Tool for your model and make sure you have the right drivers.
If you can't get it into EDL mode, you will have to file a warranty claim with OnePlus, no other choice. Mess around with the buttons and see if you can get it to reboot or try the EDL key combo (hold volume up and down and while holding plug in the USB cable that's plugged into the computer). You don't have a chance of repairing it yourself if you can't get into EDL, end of story.
pc recognizing this Qualcomm HS-USB QDLoader in device manager but in msm tool it is showing n/a.and also in device manager it is showing triangle error on device.i am using official driver provided by msm tool poster.
Need some help unbricking (solved)
I bricked my OP9 doing some stuff today. It will not turn on, access bootloader, or anything. When I plug it into my computer, it makes a connecting sound, waits 10 seconds, then disconnect sound, then repeats the process. I tried using MSM...
forum.xda-developers.com
It's can help you
Well you're not the only one I guess. That happened to me as well. So perhaps, Alhamdulillah I can help you out
The screen still remains black that means your phone is in the EDL and you'll need to get it out of it and then get back to EDL again to use msm.
Anyway, hold the power + volume up + down all simultaneously for a while. It'll take you to the Fastboot mode. Don't worry, it definitely will take you to the Fastboot mode.
Then you can do the rest of the flashing as you wish