[Completed] Soft bricked - XOLO Era - XDA Assist

Hello,
I was trying to flash my XOLO ERA device using spreadtrum drivers & SPD upgrade tool, i was doing as per step by step procedure, downloaded drivers, started downloading using spd tool while kept pressing vol down button of phone but accidentally i lifted vol down button and downloading failed in between, now my phone is not booting at all, nothing appears while connecting to pc, or even at charging, also not able to go into recovery mode by pressing vol + power button combinations.
Please guide me what to do now

Well , Could you post ur questions
Here
http://forum.xda-developers.com/android/help
Good luck ,,

Related

[HELP] Zte V970m Hard Brick

Please help, my ZTE V970m Dual Sim is Brick,
Once, it's soft brick, keeps restarting on ZTE Logo and Android Logo with repairing animation. then I Flash MT6577 scatter file and it totally brick!!!..
What can I do to make it unbrick? .. there is no power at all, even if i hold the Vol up or Vol down + PWR Button it's really don't work at all.
Can you please held me a link or a steps to make my ZTE V970m alive again?
Please give me a steps in a full restore in the phone and the recovery mode on it.
Thankyou!!
this thread
rhiel100212 said:
Please help, my ZTE V970m Dual Sim is Brick,
Once, it's soft brick, keeps restarting on ZTE Logo and Android Logo with repairing animation. then I Flash MT6577 scatter file and it totally brick!!!..
What can I do to make it unbrick? .. there is no power at all, even if i hold the Vol up or Vol down + PWR Button it's really don't work at all.
Can you please held me a link or a steps to make my ZTE V970m alive again?
Please give me a steps in a full restore in the phone and the recovery mode on it.
Thankyou!!
Click to expand...
Click to collapse
do you find form this first
http://forum.xda-developers.com/showthread.php?t=1856578
[email protected] said:
do you find form this first
http://forum.xda-developers.com/showthread.php?t=1856578
Click to expand...
Click to collapse
There is no steps on how to unbrick it
Do you try this
http://forum.xda-developers.com/showthread.php?t=1943442

[Completed] Soft bricked my karbonn titanium s1 plus

I have a karbon titanium s1 plus with 4.4.2 officialy
first of all i tried to root it with kingo root application via pc
it does not root the phone but stucks at 45% and my karbon device shutdowns and nothing happens (while nothing happens in my device . on the pc it show as QHUSP.BULK or similar) have to remove the battery and restarts and also i was not able to get to recovery mode (POWER BUTTON + VOLUME UP BUTTON)
then i tried of getting in recovery mode using adb i successfully got in
then i tried to install cwm recovery using aio universal android tool
now i don't even get to recovery mode using (POWER BUTTON + VOLUME UP BUTTON) or adb command it just stuck at karbon logo
PLEASE HELP ASAP:crying:
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!

[Completed] Huawei P8 Lite Hard Bricked

Hi,
Is there someone who can help me with a little BIG problem.. :crying:
My Huawei P8 Lite brick after update from original lollipop to marshmallow !
When I turn on a smartphone, only is lighting LED red green, red green repeats some times, +/- 20 seconds and after turn off automatically.
I can't go to recovery, fastboot, bootloader etc, nothing work, no methot wokr, vol up down + power negative, down + power negative, up + power negative , down + usb cable conectet do PC negative.....
Only lighting LED, and when I connect it to PC , in manage PC detect USB with om Chinese letters.
Exist some Flash Tool for Huawei P8 Lite ?
Hello and thanks for using XDA Assist,
A dedicated forum for your device is located here you can visit and ask your questions there, experts for your device should be able to help you there.
You can also refer to [Guide][Huawei P8] TWRP + Root Systemless Marshmallow Installation (GRA-L09&GRA-UL00) for future installation
Always read carefully before proceeding.
Good luck,
DC07

[Completed] Yonstoptech bs1078 tablet did not work after using rashr.apk

Hello I have a Yonstoptech bs1078 tablet and installed rashr.apk and went to load recovery from the app, after shutting down the tab started but stack to the first load screen. When connecting to pc it power up to the screen above but if u press +volume before plug in the usb and after press the pwr about 10 times the pc recognizes the tab. Can any tell me if I can reinstall rom?
By the way on the motherboard there is a tf slot, can this help with the above problem?
Thanks in advance for any help
Dimitris.
dimis_golf said:
Hello I have a Yonstoptech bs1078 tablet and installed rashr.apk and went to load recovery from the app, after shutting down the tab started but stack to the first load screen. When connecting to pc it power up to the screen above but if u press +volume before plug in the usb and after press the pwr about 10 times the pc recognizes the tab. Can any tell me if I can reinstall rom?
By the way on the motherboard there is a tf slot, can this help with the above problem?
Thanks in advance for any help
Dimitris.
Click to expand...
Click to collapse
Greetings
As there isn't a dedicated forum for your device here try posting your query is in:
> Android Development and Hacking > Android Q&A,Help and Troubleshooting.
You can hopefully find some support there.
Good luck

[Completed] help for unbrick zte Q802cdma (avea intouch 4 turkey)

hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
sheva728 said:
hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question here:
http://forum.xda-developers.com/showthread.php?t=2259645
That is a friendly help thread where you're sure to find expert advice.
Good luck!

Categories

Resources