Hello I have a Yonstoptech bs1078 tablet and installed rashr.apk and went to load recovery from the app, after shutting down the tab started but stack to the first load screen. When connecting to pc it power up to the screen above but if u press +volume before plug in the usb and after press the pwr about 10 times the pc recognizes the tab. Can any tell me if I can reinstall rom?
By the way on the motherboard there is a tf slot, can this help with the above problem?
Thanks in advance for any help
Dimitris.
dimis_golf said:
Hello I have a Yonstoptech bs1078 tablet and installed rashr.apk and went to load recovery from the app, after shutting down the tab started but stack to the first load screen. When connecting to pc it power up to the screen above but if u press +volume before plug in the usb and after press the pwr about 10 times the pc recognizes the tab. Can any tell me if I can reinstall rom?
By the way on the motherboard there is a tf slot, can this help with the above problem?
Thanks in advance for any help
Dimitris.
Click to expand...
Click to collapse
Greetings
As there isn't a dedicated forum for your device here try posting your query is in:
> Android Development and Hacking > Android Q&A,Help and Troubleshooting.
You can hopefully find some support there.
Good luck
Related
My brother installed cyanogenmod on this tablet, and i didn't like it, so i tried flashing the GT-P1000 stock firmware via ODIN. It didn't brick but it wasn't the right firmware so i tried going back to cyanogenmod and i bricked it. It doesn't turn on if i hold the power button and once i plug it onto the charger it gives me a blinking PHONE ------!------ COMPUTER screen, and i can't get into downloading mode or recovery mode the only option i have is to press POWER+VOL UP+VOL DOWN and a screen which shows "Power reset or uknown upload mode" appears.
How can i solve this? Do i just wait for it to charge completely and try flashing a pit via ODIN?
Any help is appreciated
Hi there,
You'd be best served asking for help from the experts who own your device, here:
Galaxy Tab Q&A, Help & Troubleshooting
Also please see this FAQ: [Questions] & [Answers] For (Nearly) All Your Galaxy Tab Problems.
Good luck
Hello everyone,
I will share my experience with you, and I hope for a solution!
A few days ago I rooted my Lenovo tab 2 A10-30 successfully using Kingroot. Then, I tried to change Kinguser with SuperSU, which I also successfully did. However, I noticed that although the main root app was SuperSU, Kingroot was still on my phone, so I deleted it using a bloatware removal app and restarted the tablet. Now it won't turn on. It gets stuck at the Lenovo loading screen, and that's about it. When I press the power button + volume down button, it gets me to a Chinese menu that is not the recovery mode (there is no MMC, just options about voloume, colors, mic test etc). If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
I tried flashing the stock ROM using the Smart Phone Flash Tool, but the PC does not recognize fully the tablet (it just prompts me to install the Lenovo USB drivers, and I cannot access the tablet's internal storage). Moreover, the Lenovo windows applications do not recognize the tablet when I connect it to the PC.
I really do hope that there is a way I can fix it.. Thank you all in advance.
Hello and thank you for using XDA Assist,
your device don't have a device forum here on XDA! Please ask here:
Android Q&A, Help & Troubleshooting
Kind regards and good luck
Trafalgar Square
XDA Assist
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
OreoFudge said:
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
Click to expand...
Click to collapse
Hi Jinky
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards.
.
Hello
I tryied to install a rom in my X800 phone, but I made a mistake. I unziped the rom file to my computer. And I ran the fastboot.bat directly from my computer to my X800 phone...
After this process, the phone doesn't want to turn on anymore. When I press down button + power nothing happen, even with usb cable plugged. The battery was almost full. The screen is black and no chance to switch on the phone anymore, no power at all.
Please can someone help me with this issue? Many thanks
saphyr9 said:
Hello
I tryied to install a rom in my X800 phone, but I made a mistake. I unziped the rom file to my computer. And I ran the fastboot.bat directly from my computer to my X800 phone...
After this process, the phone doesn't want to turn on anymore. When I press down button + power nothing happen, even with usb cable plugged. The battery was almost full. The screen is black and no chance to switch on the phone anymore, no power at all.
Please can someone help me with this issue? Many thanks
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please post your question here:
http://forum.xda-developers.com/android/help
You'll receive expert advice there.
Good luck!
i have acer e600 i tried to root it
after pressing - and + volume and power for fastboot shows image but it turns off
my phone wont open and no lights even i charge its dead
i tried to connect in my pc but it did not recognize
someone help me pls
thanks
meianz03 said:
i have acer e600 i tried to root it
after pressing - and + volume and power for fastboot shows image but it turns off
my phone wont open and no lights even i charge its dead
i tried to connect in my pc but it did not recognize
someone help me pls
thanks
Click to expand...
Click to collapse
Hello,
Please try posting your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.