Related
Hey XDA
I tried to install CM9 today, it fail...
I have unlocked my phone using htcdev.com.
Then I followed this:
If you unlocked your phone via htcdev.com, you must flash the included
boot.img after flashing the ROM in recovery:
- Boot into fastboot, either by:
- Turning phone on whilse holding VOLUME DOWN, or
- adb reboot bootloader, or
- using an option in your recovery (eg. Reboot Bootloader)
- Connect your phone to your PC and copy the boot.img from the ROM .zip
to the same place as fastboot.exe and issue the following command:
- fastboot flash boot boot.img
Failing to follow these instructions on a htcdev.com unlocked device will
cause the ROM to fail to boot.
And now it just stands with a mobile and a ret warning sign. I can get in bootloader, but that's all. I have the CM9.zip on the sdcard but I forgot to run it before I did the above mentioned. I have tried to reset the mobile from bootloader nothing helps
Pleas help me what should I do?
So what is your problem exactly ? Do you have a custom recovery like 4EXT ? It's needed in order to apply the CM9.zip.
None
No i have not installed any recovery app. I cant start my mobile
Naaler said:
Hey XDA
I tried to install CM9 today, it fail...
I have unlocked my phone using htcdev.com.
Then I followed this:
If you unlocked your phone via htcdev.com, you must flash the included
boot.img after flashing the ROM in recovery:
- Boot into fastboot, either by:
- Turning phone on whilse holding VOLUME DOWN, or
- adb reboot bootloader, or
- using an option in your recovery (eg. Reboot Bootloader)
- Connect your phone to your PC and copy the boot.img from the ROM .zip
to the same place as fastboot.exe and issue the following command:
- fastboot flash boot boot.img
Failing to follow these instructions on a htcdev.com unlocked device will
cause the ROM to fail to boot.
And now it just stands with a mobile and a ret warning sign. I can get in bootloader, but that's all. I have the CM9.zip on the sdcard but I forgot to run it before I did the above mentioned. I have tried to reset the mobile from bootloader nothing helps
Pleas help me what should I do?
Click to expand...
Click to collapse
1.install a custom recovery like 4ext or cwm
(2. Backup current system) this time you don't have to do this since you don't have a working system at the moment.
3. Full wipe (data, system, boot, caches... Not sd card) from recovery
4. Flash ROM zip from recovery
5.flash boot.img via adb
6.reboot
7.done
Sent by my fingers to your head.
How?
The recovery app Is it ón the computer or the Mobile?
ón Mobile how do i get it ón?
1.install a custom recovery like 4ext or cwm
(2. Backup current system) this time you don't have to do this since you don't have a working system at the moment.
3. Full wipe (data, system, boot, caches... Not sd card) from recovery
4. Flash ROM zip from recovery
5.flash boot.img via adb
6.reboot
7.done
Click to expand...
Click to collapse
That's it.
here is 4ext 2.2.7: http://dl.dropbox.com/u/45382761/PG88IMG_4EXTrecovery_2.2.7_RC5_Desire_S.zip
Extract the "recovery.img" and flash it using fastboot:
fastboot flash recovery recovery.img
Thanks
Thanks it works now
Naaler said:
The recovery app Is it ón the computer or the Mobile?
ón Mobile how do i get it ón?
Click to expand...
Click to collapse
I'm assuming you know how to boot into fastboot and use fastboot and adb commands. If not, just click on the link in my signature under Helpful links.
Once you're done, just put the attached file in your adb folder, then boot into fastboot and issue the command ;
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
You will now have the custom 4EXT Recovery. From there, just follow the steps you outlined in your first post, and you should be up and running.
Cheers.
EDIT: I see you already got it working while I was composing my post. Congrats!
@op could you please update the thread title to something like [solved]
Sent by my fingers to your head.
Okay, sorry for being such a noob. I am learning. I run the boot img file and it goes through the stuff and says now reboot to recovery to flash rom. Select Bootloader from menu then select Recovery. I have CWM installed. After it say that in cmd do i go to recovery and flash the zip file Boot.imgflasher? I tried that and it say initializing and then it says canceled. So I guess my question is what am I doing wrong? and how should i properly install this? THank you for you help. This is the thread http://forum.xda-developers.com/showthread.php?t=1655011:eek:
you flash the boot.img before you go to recover, that's it.
"i go to recovery and flash the zip file Boot.imgflasher?".....NO.....
you just flash the cleanrom.zip ....
Okay so from the home screen with the phone on flash the Install boot.img after that go to bootloader and wipe data. then reboot phone and that is all?
Vocalshock said:
Okay so from the home screen with the phone on flash the Install boot.img after that go to bootloader and wipe data. then reboot phone and that is all?
Click to expand...
Click to collapse
I cant understand you...so follow this.....
ok...flash cleanrom 2.2...
1. download
Boot.img Flasher.zip..
CleanROM Standard 2.2.zip
2. unzip boot.img flahser.zip
3. boot to bootloader, and select fastboot hit power button
4. type "fastboot flash boot " in the terminal/command
5. drag your boot.img from the unziped folder to the terminal/command in step 4
6. hit enter....your boot.img should be flashed in....
7. reboot the phone to bootloader mode again....(be to safe)
8. go to recovery....
9. to factory reset.... which wipe the data and cache ....
10. install the "CleanROM Standard 2.2.zip" from recovery....
11. optional.....wipe the D cache...
12. reboot...
niceppl said:
I cant understand you...so follow this.....
ok...flash cleanrom 2.2...
1. download
Boot.img Flasher.zip..
CleanROM Standard 2.2.zip
2. unzip boot.img flahser.zip
3. boot to bootloader, and select fastboot hit power button
4. type "fastboot flash boot " in the terminal/command
5. drag your boot.img from the unziped folder to the terminal/command in step 4
6. hit enter....your boot.img should be flashed in....
7. reboot the phone to bootloader mode again....(be to safe)
8. go to recovery....
9. to factory reset.... which wipe the data and cache ....
10. install the "CleanROM Standard 2.2.zip" from recovery....
11. optional.....wipe the D cache...
12. reboot...
Click to expand...
Click to collapse
THank You Very Much! Case closed!
I wipped my Htc one S, stupid, I kknow, now the console does not find the phone, can somebody help???
Done.
Thanks for reply
look if you can still acces hboot. press the volume down button then press the power button. hold down the power button for about 3-5 seconds and release it but keep holding the volume down button till hboot appear. now check if you unlock your bootloader, if yes relock bootloader. look at the dev section on how to relock bootloader. if you succesfully relock bootloader now is the time to look for your RUU this will get you back to stock. im no expert but this what i do. please correct me if i posted wrong.
hope it helps.
---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------
oh by the way, before you run RUU you must first flash the stock recovery using fastboot.
This is what I did:
Lock Bootloader and unrooting
Make sure phone is on USB debugging:
1. adb reboot-bootloader
2. flash stock recovery -->
fastboot flash recovery htc_stock_ville_recovery_signed.img
3. fastboot oem lock
4. Run RUU
5. Do factory reset & check mark on earse everything
Unlock Bootloader & Root
Make sure phone is on USB debugging:
1. adb reboot-bootloader
2. fastboot flash unlocktoken Unlock_code.bin
3. fastboot flash recovery TWRP.img
Then copy SuperSu.zip to sdcad
4. adb reboot-bootloader-->Recovery--> Flash SuperSu, then reboot
FLASH ROM:
Make sure phone is on USB debugging:
1. adb reboot-bootloader
2. fastboot flash boot boot.img
Or use Flash GUI to avoid step 1 and 2
3. TWRP recovery-->Wipe-->system, cache, devlik, & factory reset
4. flash ROM
Wipped HTC one s
cat2115 said:
This is what I did:
Lock Bootloader and unrooting
Make sure phone is on USB debugging:
1. adb reboot-bootloader
2. flash stock recovery -->
fastboot flash recovery htc_stock_ville_recovery_signed.img
3. fastboot oem lock
4. Run RUU
5. Do factory reset & check mark on earse everything
Unlock Bootloader & Root
Make sure phone is on USB debugging:
1. adb reboot-bootloader
2. fastboot flash unlocktoken Unlock_code.bin
3. fastboot flash recovery TWRP.img
Then copy SuperSu.zip to sdcad
4. adb reboot-bootloader-->Recovery--> Flash SuperSu, then reboot
FLASH ROM:
Make sure phone is on USB debugging:
1. adb reboot-bootloader
2. fastboot flash boot boot.img
Or use Flash GUI to avoid step 1 and 2
3. TWRP recovery-->Wipe-->system, cache, devlik, & factory reset
4. flash ROM
Click to expand...
Click to collapse
I cannot find the disk to use fastboot, only if I am in recovery TWRP, I can see the card, than I try to flash, but it the zip file cannot be installed
mita399 said:
I cannot find the disk to use fastboot, only if I am in recovery TWRP, I can see the card, than I try to flash, but it the zip file cannot be installed
Click to expand...
Click to collapse
Go into TWRP recovery--->Advance--->Mount-->Click on a button "Mount USB Storage" then connect phone to pc
Now you should see an un-format sdcard. Format it. Right click-->format
Once done, click Unmount USB Storage.
Now use ToolKit to flash stock recovery, then use toolkit to lock BL. Now you can run RUU
Also, please stop double/triple post your problem in different thread w/same issues
#Prerequisites:
Stock Rom: https://mirrors.lolinet.com/firmware/moto/ali/official/RETAIL/
TWRP: https://dl.twrp.me/ali/twrp-3.3.0-0-ali.img
Dejello TWRP: https://drive.google.com/open?id=1QWYIcti-wJPPMAc8Ol5pnoO3b8CqtKFn (Unofficial) //Only for custom roms, when you need to install GApps.
Magisk: https://github.com/topjohnwu/Magisk/releases/download/v19.0/Magisk-v19.0.zip
Magisk Manager: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.1.1/MagiskManager-v7.1.1.apk
DM Verity Disabler: https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_04.03.19.zip
Unlocked Bootloader: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Minimal ADB/Fastboot (Windows only): https://androidfilehost.com/?fid=962187416754459552
Moto USB Drivers (drivers only, no manager): https://motorolausbdriver.com/wp-content/uploads/Motorola_Mobile_Drivers_v6.4.0.zip
Windows hint:
For all what you want to do with your Motorola phone, you need the above provided Minimal ADB/Fastboot environment.
Download and extract it,
Move the files you want to flash into the folder
Open CMD (Windows Key and R - then type cmd) and navigate into the extracted folder.
//It's easier when you type cd into the cmd and drag the folder from your adb/fastboot environment into the cmd window and hit enter.
And that's it. The patched boot image is no longer needed.
Rooting the Moto G6
1. Boot into fastboot mode (Vol - and Power simultaneously) and connect it to your computer
2. Open Terminal (Linux)/CMD (Windows) and go into the folder where your recovery image lies.
3. Type "fastboot flash recovery recovery.img" and use the volume keys on your phone to select "recovery mode", when finished.
4. If it asks for a password hit cancel, go to wipe, data wipe and confirm it with yes. Then reboot again into recovery.
5. Repeat the wiping and reboot another time into recovery.
6. Connect your phone to your Computer while in recovery and copy magisk and dm-verity disabler to your phone.
7. Go to Install and flash dm-verity disabler first, then magisk.
Thats it. You're rooted.
Update/Go back to Stock.
//Download the stock rom you want to use and extract it to your Desktop.
//Latest ROM (Android 9) is ALI_RETAIL_9.0_PPS29.55-24_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
1. Go into recovery mode (twrp), choose wipe - wipe data and confirm with yes.
2. Back to the wipe main screen, advanced wipe and hit everything.
3. Wipe it two times.
4. Boot into download mode and connect your phone to your computer.
5. Open Terminal or CMD in the folder of your stock firmware and hit the following commands (hint: it's easier to use a bash/batch file):
Code:
fastboot erase userdata
fastboot erase cache
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase DDR
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash logo logo.bin
fastboot flash dsp adspso.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot erase cache
fastboot reboot
Wait until it finished, disconnect your phone, wait and set it up.
That's it.
Simple and easy.
So... When do you tell people about installing ADB and fastboot? Moto drivers? Ya skipped some stuff dude.
madbat99 said:
So... When do you tell people about installing ADB and fastboot? Moto drivers? Ya skipped some stuff dude.
Click to expand...
Click to collapse
For my own experience it worked without moto drivers. On Windows 7 and Windows 10 testing systems.
Personally I use Arch, which natively supports adb and fastboot, provided by the android-tools package.
But thank you for your hint, I added it.
And for root not need boot.img file?
cecogor said:
And for root not need boot.img file?
Click to expand...
Click to collapse
No, Magisk is patching the stock boot.img, which is already on your device.
The patched images are not needed anymore for Magisk.
ThisIsRussia said:
No, Magisk is patching the stock boot.img, which is already on your device.
The patched images are not needed anymore for Magisk.
Click to expand...
Click to collapse
Ok, I see.
I remark one more thing - "Disable_Dm-Verity_ForceEncrypt_02.04.2019" i much more biger then "Force_Encryption_Disabler_For_ALI_Oreo_v2" - 4MB vs 100kB. What is different here?
cecogor said:
Ok, I see.
I remark one more thing - "Disable_Dm-Verity_ForceEncrypt_02.04.2019" i much more biger then "Force_Encryption_Disabler_For_ALI_Oreo_v2" - 4MB vs 100kB. What is different here?
Click to expand...
Click to collapse
Due to OS changes and it's a feature bundle.
It edits DM-Verity, ForceEncrypt and Disk Quota.
Can't get root
The install by the instructions went perfectly but I can't get root. I did one thing differently than on the root instructions and I think I did it correctly, where you have;
Type "fastboot flash recovery recovery.img" and use the volume keys on your phone to select "recovery mode", when finished.
I did "fastboot flash recovery twrp-3.2.3-0-ali.img" which I thought you meant because stock recovery would already be installed or am I missing something here. I followed all the rest of the instructions perfectly and everything seemed to wipe reboot and install fine but when I boot back into android I don't have root. In fact I tried it four times and never got root. Do you have any ideas what could be wrong? Thanks for any help but I do have Android 9 running just fine. I'd like to get this rooted rather than go back to 8 because it seems to run so much better.
mward7221 said:
The install by the instructions went perfectly but I can't get root. I did one thing differently than on the root instructions and I think I did it correctly, where you have;
Type "fastboot flash recovery recovery.img" and use the volume keys on your phone to select "recovery mode", when finished.
I did "fastboot flash recovery twrp-3.2.3-0-ali.img" which I thought you meant because stock recovery would already be installed or am I missing something here. I followed all the rest of the instructions perfectly and everything seemed to wipe reboot and install fine but when I boot back into android I don't have root. In fact I tried it four times and never got root. Do you have any ideas what could be wrong? Thanks for any help but I do have Android 9 running just fine. I'd like to get this rooted rather than go back to 8 because it seems to run so much better.
Click to expand...
Click to collapse
You Need install magisk Manager wich is linked above and restart device.
Then open magisk Manager from Menu.
ThisIsRussia said:
You Need install magisk Manager wich is linked above and restart device.
Then open magisk Manager from Menu.
Click to expand...
Click to collapse
I tried all that and couldn't get it to work, I downloaded everything from your links above but no go. Someone posted a no-verity boot image in another thread. post 598 I believe and I flashed that file, flashed Magisk 18.1 in twrp and now I have root so I'm set, Thanks for your reply
ThisIsRussia said:
For my own experience it worked without moto drivers. On Windows 7 and Windows 10 testing systems.
Personally I use Arch, which natively supports adb and fastboot, provided by the android-tools package.
But thank you for your hint, I added it.
Click to expand...
Click to collapse
Of course on Linux no drivers are needed. But most running Linux don't need instructions. It's usually windows users needing such instructions.
That's the only reason I chimed in.
Carry on.
Nice guide.
ThisIsRussia said:
Update/Go back to Stock.
//Download the stock rom you want to use and extract it to your Desktop.
//Latest ROM (Android 9) is ALI_RETAIL_9.0_PPS29.55-24_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
1. Go into recovery mode (twrp), choose wipe - wipe data and confirm with yes.
2. Back to the wipe main screen, advanced wipe and hit everything.
3. Wipe it two times.
4. Boot into download mode and connect your phone to your computer.
5. Open Terminal or CMD in the folder of your stock firmware and hit the following commands (hint: it's easier to use a bash/batch file):
Click to expand...
Click to collapse
When updating a rooted phone from Android 8 to Android 9 do you have to wipe (in TWRP) and use the following?
Code:
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
kmssd said:
When updating a rooted phone from Android 8 to Android 9 do you have to wipe (in TWRP) and use the following?
Click to expand...
Click to collapse
If you Change major OS Version, you always need a clean Flash and rerooting.
ThisIsRussia said:
For my own experience it worked without moto drivers. On Windows 7 and Windows 10 testing systems.
Personally I use Arch, which natively supports adb and fastboot, provided by the android-tools package.
But thank you for your hint, I added it.
Click to expand...
Click to collapse
I would change official TWRP to Dejello's unofficial TWRP as official one won't install Gapps
https://drive.google.com/open?id=1QWYIcti-wJPPMAc8Ol5pnoO3b8CqtKFn
Hi ppl, sorry for that questions, I make a lot of roots, on mine Samsung S3, Sony ZQ, and many other, But in last times I dont make it with magisk.... so someone can explain some things for me?
First work on XT1925-3? 4/64gb variant?
TWRP is need or only ADB? I just want to make only by adb...
If its okay now:
1. Boot into fastboot mode (Vol - and Power simultaneously) and connect it to your computer
Click to expand...
Click to collapse
>> Here is ok,
2. Open Terminal (Linux)/CMD (Windows) and go into the folder where your recovery image lies.
Click to expand...
Click to collapse
>> Here is ok too
3. Type "fastboot flash recovery recovery.img" and use the volume keys on your phone to select "recovery mode", when finished.
Click to expand...
Click to collapse
>> Here is ok too, similar to flash my Sony
4. If it asks for a password hit cancel, go to wipe, data wipe and confirm it with yes. Then reboot again into recovery.
Click to expand...
Click to collapse
>> I belive if I have pass on phone? if I remove the phone only need a reboot in recovery?
5. Repeat the wiping and reboot another time into recovery.
Click to expand...
Click to collapse
>> The phone will be need a wipe two wipes? or only one?
6. Connect your phone to your Computer while in recovery and copy magisk and dm-verity disabler to your phone.
Click to expand...
Click to collapse
>> Here is mine question, the phone wont wakeup for now, but in recovery mode will be open folder to that? I remeber on my S3 in twrp I mount the storage to acess, in ADB method is same?
7. Go to Install and flash dm-verity disabler first, then magisk.
Click to expand...
Click to collapse
>> Okay, install DM, after that, wakeup phone, and after that flash magisk? Magisk maneger is same thing? So, is Flash DM > reboot into recovery or wakeup? after, flash magisk, reboot again? install magisk maneger?
So, sorry for that all questions, and if I trade some words, I have dyslexia and I'm backing to root world after a long time.
brunogroa said:
Hi ppl, sorry for that questions, I make a lot of roots, on mine Samsung S3, Sony ZQ, and many other, But in last times I dont make it with magisk.... so someone can explain some things for me?
First work on XT1925-3? 4/64gb variant?
TWRP is need or only ADB? I just want to make only by adb...
If its okay now:
>> Here is ok,
>> Here is ok too
>> Here is ok too, similar to flash my Sony
>> I belive if I have pass on phone? if I remove the phone only need a reboot in recovery?
>> The phone will be need a wipe two wipes? or only one?
>> Here is mine question, the phone wont wakeup for now, but in recovery mode will be open folder to that? I remeber on my S3 in twrp I mount the storage to acess, in ADB method is same?
>> Okay, install DM, after that, wakeup phone, and after that flash magisk? Magisk maneger is same thing? So, is Flash DM > reboot into recovery or wakeup? after, flash magisk, reboot again? install magisk maneger?
So, sorry for that all questions, and if I trade some words, I have dyslexia and I'm backing to root world after a long time.
Click to expand...
Click to collapse
Here are the steps I use to flash/root my wifes Moto G6 xt1925-6 (pie)
1. Make sure dev options are on and usb debugging is on.
2. adb reboot bootloader
3. Extract the image file directly into the same directory as adb and fastboot.
4. Launch cmd as admin, CD to the directory where adb and fastboot is.
5. via CMD launch flash_all.bat which will run through and do all the flashing of the necessary parts.
6. I actually did the first time setup, making sure usb debugging is on again and also making sure I dont have any pw or security enabled.
7. adb reboot bootloader.
8. fastboot flash recovery recovery.img
9. fastboot flash boot no-verity_boot.img
10. boot into twrp and then format, I did a Format data, then a factory data reset.
11. back in twrp copy magisk over to phone, and install via twrp
12. reboot system and it should boot up again.
13. make sure to do first time setup and enable usb debugging and make sure magisk manager is installed, updated, and configured how you want it.
14. I usually do core only mode, magisk hide, and also hide the magisk manager package via the settings. under general settings.
Stuck on Booting screen
Unlocked bootloader on Moto G6 xt1925-6 RETUS. Loaded TWRP fine. Did factory reset twice to remove data encryption. Installed Disable_Dm-Verity_ForceEncrypt_03.28.19.zip followed by Magisk 18.1.zip. Boots back to recovery fine but stays at boot screen when booting to system.
Any suggestions.
Stephen
theseeker2654 said:
Here are the steps I use to flash/root my wifes Moto G6 xt1925-6 (pie)
1. Make sure dev options are on and usb debugging is on.
2. adb reboot bootloader
3. Extract the image file directly into the same directory as adb and fastboot.
4. Launch cmd as admin, CD to the directory where adb and fastboot is.
5. via CMD launch flash_all.bat which will run through and do all the flashing of the necessary parts.
6. I actually did the first time setup, making sure usb debugging is on again and also making sure I dont have any pw or security enabled.
7. adb reboot bootloader.
8. fastboot flash recovery recovery.img
9. fastboot flash boot no-verity_boot.img
10. boot into twrp and then format, I did a Format data, then a factory data reset.
11. back in twrp copy magisk over to phone, and install via twrp
12. reboot system and it should boot up again.
13. make sure to do first time setup and enable usb debugging and make sure magisk manager is installed, updated, and configured how you want it.
14. I usually do core only mode, magisk hide, and also hide the magisk manager package via the settings. under general settings.
Click to expand...
Click to collapse
Ohh sure... So need twrp to do, I Will trie this, thx a lots, here is the same with pie
Tom Swift said:
Unlocked bootloader on Moto G6 xt1925-6 RETUS. Loaded TWRP fine. Did factory reset twice to remove data encryption. Installed Disable_Dm-Verity_ForceEncrypt_03.28.19.zip followed by Magisk 18.1.zip. Boots back to recovery fine but stays at boot screen when booting to system.
Any suggestions.
Stephen
Click to expand...
Click to collapse
On top of using the disabler download and flash the no verity boot.img from the link below. Works great on my xt1925-6 with pie.
Also, use Magisk 19.0
https://drive.google.com/file/d/1JLMVRBCsMnr7RYxdRFjFLOwVSy8r8hSQ/view
The DM Verity Disabler link not working:
https://zackptg5.com/downloads/Disab...02.04.2019.zip
AIO GUIDE TECNO KD7
1. Bootloader Unlocking
1. Download & install the ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2. TWRP [unoficial]
https://forum.xda-developers.com/t/twrp-recovery-for-tecno-kd7.4378493/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link: Orange disabler.zip
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-v21.0.zip
3.1. Unroot
1.boot into recovery
2. Flash magisk unistaller .zip
link:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-uninstaller-20201003.zip
5.Stock Firmware Files
Stock boot ,stock recovery & Full Firmware are added
To Flash full firmware
Extract zip & run flash.bat
Link: TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404-fastboot flash full rom.zip
6. Gsi rom / Custom rom Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/
vendor : ( 3 sim problem guide )
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
7. Phone Hard Brick fix
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
7.1. Flash file:
Link :
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Tecno kd7 full guide
https://forum.xda-developers.com/t/...r-unlocking-root-twrp-stock-firmware.4345557/
What do you mean by boot into recovery? Going fastboot mode? And then writing fastboot flash recovery magisk.zip( for step 3(root)) ?
Also should have the updatest kd7 before rooting?
Thanks in advance for your hard work.
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format.
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall flash
Parvej789 said:
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
1.Fastboot flash recovery .
Fastboot reboot recovery -
Open recovery -wipe format data-yes.
reboot to recovery
and install magisk zip.
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall
Click to expand...
Click to collapse
Thank a bunch for consist help with my nobby question(s)!
Correct me if i am wrong before i procced,
Fire up pc, open terminal/cmd and writing the following one after another
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
[command]
Now i boot into twrp recovery and from there "wipe data". Then "advanced wipe" with delvic cache.
Next, again, twrp recovery and flash magisk.zip
Right?
Tanzin01
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next, Reboot to recovery .again, twrp recovery and flash magisk.zip
Right?
Thanks man. Have a nice day&life
hey man, all went well till format. in format i saw some error, eg failed to mount /data(something like this). Any idaea why i got this?
[i got a success msg though]]
also can i access twrp recovery mode via volume and power button?(i tried volume up+power button but got adnroid image with "No command".)
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option ->Format Data -> yes Format .
Next,
Reboot options -> recovery click Wait reboot to recovery and magisk.zip flash
Parvej789 said:
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
All the commands worked smoothly but when again tried to go twrp recovery for rooting, I can't seem to find twrp. I got no command with Android pic and after few seconds default device recovery option. From where I can navigate to fastboot, recovery, wipe and etc.
"
Next,
Reboot options to recovery .again, tw
Parvej789 said:
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Tanzin01 said:
"
Next,
Reboot options to recovery .again, tw
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Click to expand...
Click to collapse
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format and back home menu
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Unorganized posts! Its xda's fault. Your edited post wasn't shown to me until my last post was posted!
Thanks man. This time I got it. I wrongly rebooted after "format data". I will reflash the twrp file again tomorrow.
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Tanzin01 said:
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Click to expand...
Click to collapse
Stock recovery.img flash and reboot
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help
Tanzin01 said:
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help :fashfashfashfash)
Click to expand...
Click to collapse
Yes
Or
Full flash
KD7-H6211FQRSTU-Q-GL-210520V392.zip
drive.google.com
how to do full flash?
[command]
fastboot flash system FullFlashfirmware.zip
[command]
or
sideload the zip file and then swipe install via twrp?
No .
PC to mobile(fastboot flash)
Now connect device to PC
Unzip flash file PC
Folder open
Click flash.bat
CMD open:
1.Do you want to Reboot device into fastboot [Y/N]=y type enter
2.wipe user data [Y/N]=y type enter
Then flash started
FLASHING success
Reboot to phone on
sadly im not on windows. Anyway thnx. i will try and see flashing recovery. Will let you know the result.
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Parvej789 said:
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Click to expand...
Click to collapse
got error
```
fastboot flash recovery recovery.img
Sending 'recovery' (39936 KB)
FAILED (Write to device failed (No such device))
fastboot: error: Command failed
``
tried changing cable but no change.
Oky so i had a hunch, and it was correct. i mounted system and didnt get that error.
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Wipe option->format data -yes
Reboot option-> recovery and Twrp open
1.boot.img flash
2.super.img flash
3.recovery.img flash
Than reboot
Tanzin01 said:
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Click to expand...
Click to collapse
Build version correct
Your build version