Related
Ok Hi every one. I'm new here but I learned much about what I want. Still nothing. I tried to root my sgs 4g with superoneclick with no luck, many different CF also with no luck. Generaly probably my problem is that I've got 3e recovery.. i tried also put CWM but also with no luck and load some other kernel through Odin but only one working is the same that I've got - 2.6.35.7-T959VUVKJ5-CL685701. The main reason about the root is I want ICS 4 on my samsung galaxy s t-mobile. I'm shore its posibble. Thanks for any sugestions.
Z4root or superoneclick needed
Here's a forum that talks about rooting your phone.
http://forum.xda-developers.com/showthread.php?t=966133
I did it on version 2.2 with Z4root. But in that forum they mention superoneclickroot, so you may want to try that one.
In any case, you will likely need to get Odin 1.7 (the samsung flashing tool) and the USB drivers for your device ready on your PC before you can continue.
Take a look at that forum for more info to get you going in the right direction
---------- Post added at 05:16 PM ---------- Previous post was at 05:09 PM ----------
Heres' the ROM I am currently using....
http://forum.xda-developers.com/showthread.php?t=1553437
But I have heard there are others that might be better, so I ma looking for the latest and greatest right now. But I can confirm this works fine. You probably want to optimize your radio after you get through the whole ROM install. If you are in the US, I can point you to where to get a new radio.
Super Wipe Script for Vibrant with ICS:
http://forum.xda-developers.com/showthread.php?t=1166954&highlight=lippol
General process for new ROM is to backup in recovery then super wipe the phone and reboot to recovery then run your ROM installer. It is also recommended to install any firmware updates BEFORE the ROM install, so if you have one, keep this in mind.
I am stuck in a strange problem. I have LG P500 which i have rooted with superoneclick and it is rooted now. I have 2.3.3 V20d (India) which i upgraded a year back.
Now the problem is that according to everyone mine is a new baseband but when i use Rom Manger to install custom recovery it shows my phone but in brackets it says 'old BB'..There were just two options,one was my phone and the other to click the box down if my device is not shown in the above list. I am stuck as can't find any solution and i am a newbie.I did ask some senior members and contributors/devs and waiting for the help,so i thought i will post it here also in case someone has faced this problem before.
Screen capture attached as well.....Just do not know where to go from here.Thanks a lot
MORE INFO: I just downloaded XDA ASSISTANT app to check and in software section it mentions about baseband also. The reading is: V07u-000-000 (MAR-23-2009). Can't say if it is of any help
kitu34 said:
I am stuck in a strange problem. I have LG P500 which i have rooted with superoneclick and it is rooted now. I have 2.3.3 V20d (India) which i upgraded a year back.
Now the problem is that according to everyone mine is a new baseband but when i use Rom Manger to install custom recovery it shows my phone but in brackets it says 'old BB'..There were just two options,one was my phone and the other to click the box down if my device is not shown in the above list. I am stuck as can't find any solution and i am a newbie.I did ask some senior members and contributors/devs and waiting for the help,so i thought i will post it here also in case someone has faced this problem before.
Screen capture attached as well.....Just do not know where to go from here.Thanks a lot
Click to expand...
Click to collapse
and yes that is your phone lg p500 old bb, it doesn't matter, RomManager doesn't discover your phone, it is just a list that you have to choose
from
Are you sure?
grigtm said:
and yes that is your phone lg p500 old bb, it doesn't matter, RomManager doesn't discover your phone, it is just a list that you have to choose
from
Click to expand...
Click to collapse
Are you sure it doesn't matter? But why would Rom Manager mention that? That means it is misleading the user and the user can think esp a newbie that his is a old baseband therefore he will not go with the new baseband and land in trouble.
More Info In Case It Is Helpful
I just downloaded XDA ASSISTANT app to check and in software section it mentions about baseband also. The reading is: V07u-000-000 (MAR-23-2009). Can't say if it is of any help
My advice: don't use Rom Manager to install a custom recovery (or even a Rom); there have been many reports of people bricking their devices that way. A safer way of installing a recovery would be to use LGMDP or adb/fastboot -- instructions should be in a sticky somewhere; I can't search for it at the moment since I'm on mobile. Anyway, good luck.
Edit: Corrected typo -- it's LGMDP.
____________________
Sent from the moon.
Thanks a lot! So kind of you
Syd_M said:
My advice: don't use Rom Manager to install a custom recovery (or even a Rom); there have been many reports of people bricking their devices that way. A safer way of installing a recovery would be to use LGDMP or adb/fastboot -- instructions should be in a sticky somewhere; I can't search for it at the moment since I'm on mobile. Anyway, good luck.
____________________
Sent from the moon.
Click to expand...
Click to collapse
OMG now i have to start all over again,and being a newbie it is not easy at all.Does rooting etc means spending half the time in the forum?Since yesterday my eyes and back are paining just coz of this hehehee
Ok i will check that brother,thanks a lot seriously.
On what basis you say that?
grigtm said:
and yes that is your phone lg p500 old bb, it doesn't matter, RomManager doesn't discover your phone, it is just a list that you have to choose
from
Click to expand...
Click to collapse
I mean you have encountered that or something yourself or any body else? We have to be sure otherwise the phone will be bricked or ruined and i am not a rich person,therefore god is great hehehe
kitu34 said:
OMG now i have to start all over again,and being a newbie it is not easy at all.Does rooting etc means spending half the time in the forum?Since yesterday my eyes and back are paining just coz of this hehehee
Ok i will check that brother,thanks a lot seriously.
Click to expand...
Click to collapse
Well, I know that I spent a few days reading the sticky threads before I rooted my phone, but even then I managed to softbrick it for a couple of days (though it was sort of my fault, since I was using Linux at the time and all the instructions were for Windows, so I had to improvise). You shouldn't need to read every thread, though -- just the stickies should do.
Anyway, regarding Rom Manager, there's a warning in this thread (post #2) not to use it to install a recovery since the CWM version isn't compatible with our devices. As for a recovery you should use, I strongly recommend AmonRa 3.0.6 for a stable and bugfree recovery.
Edit: Just FYI, I installed my recovery using ADB and fastboot. It was quick and easy, the hardest part was installing the LG drivers and ADB (via installing the Android SDK).
____________________
Sent from the moon.
kitu34 said:
I mean you have encountered that or something yourself or any body else? We have to be sure otherwise the phone will be bricked or ruined and i am not a rich person,therefore god is great hehehe
Click to expand...
Click to collapse
I installed my first time recovery by RomManager on O1 3 years ago, I cannot realy remember how was it but it worked, but first go to settings, apps development(or something, you are on GB) and check ANDROID DEBUGGING, now use this tool from here http://forum.xda-developers.com/showthread.php?t=1827723 all credits to shinobisoft
you can find recovery's here http://forum.xda-developers.com/showthread.php?t=1523050 this are flashable zips
or search Optimus One android develepment and original android development threads
I personaly use CWM 5.0.2.7 but my favourite is TWRP (after I'll change rom I'll go back to TWRP)
---------- Post added at 09:54 PM ---------- Previous post was at 09:35 PM ----------
RomManager doesn't suport anymore old phones like O1, that's why it appears with old bb, anyway, allot of ppl flash first time recovery with RomManager, and because it is first time, there must be some fails, not all made it first time, and RomManager is to blame ?? no, worked for me, worked for milions and for a few thousants didn't, and it depends by allot of things but in most cases the people are to blame
grigtm said:
I installed my first time recovery by RomManager on O1 3 years ago, I cannot realy remember how was it but it worked, but first go to settings, apps development(or something, you are on GB) and check ANDROID DEBUGGING, now use this tool from here http://forum.xda-developers.com/showthread.php?t=1827723 all credits to shinobisoft
you can find recovery's here http://forum.xda-developers.com/showthread.php?t=1523050 this are flashable zips
or search Optimus One android develepment and original android development threads
I personaly use CWM 5.0.2.7 but my favourite is TWRP (after I'll change rom I'll go back to TWRP)
---------- Post added at 09:54 PM ---------- Previous post was at 09:35 PM ----------
RomManager doesn't suport anymore old phones like O1, that's why it appears with old bb, anyway, allot of ppl flash first time recovery with RomManager, and because it is first time, there must be some fails, not all made it first time, and RomManager is to blame ?? no, worked for me, worked for milions and for a few thousants didn't, and it depends by allot of things but in most cases the people are to blame
Click to expand...
Click to collapse
Thanks,but what am i suppose to do with this tool? What about rom manager?Shall i go with it?I am sorry i am a newbie so you can lose patience hehehe
kitu34 said:
Thanks,but what am i suppose to do with this tool? What about rom manager?Shall i go with it?I am sorry i am a newbie so you can lose patience hehehe
Click to expand...
Click to collapse
No, don't use ROM Manager. 3 years ago when @grigtm used it, it was fine. These days, however, the CWM version in ROM Manager is incompatible with our device. You will risk bricking your phone if you use ROM Manager. Personally, I advise against it.
As for the Android Flash Recovery program that was linked earlier, I haven't used it personally, but it seems easy enough to use. Just
1. Download Android Flash Recovery
2. Install the LG drivers (it's packaged with the program in a subfolder called "USB")
3. Enable USB debugging on your phone (Settings > Applications > Development > check USB debugging)
4. Start your phone in Fastboot Mode.
5. Connect your phone to the PC.
6. Start Android Flash Recovery and follow the instructions.
Confused
Syd_M said:
No, don't use ROM Manager. 3 years ago when @grigtm used it, it was fine. These days, however, the CWM version in ROM Manager is incompatible with our device. You will risk bricking your phone if you use ROM Manager. Personally, I advise against it.
As for the Android Flash Recovery program that was linked earlier, I haven't used it personally, but it seems easy enough to use. Just
1. Download Android Flash Recovery
2. Install the LG drivers (it's packaged with the program in a subfolder called "USB")
3. Enable USB debugging on your phone (Settings > Applications > Development > check USB debugging)
4. Start your phone in Fastboot Mode.
5. Connect your phone to the PC.
6. Start Android Flash Recovery and follow the instructions.
Click to expand...
Click to collapse
This is the first step after rooting.Ok
Fastboot mode is Home + Power i just have to do that? Like in rom manager we could do backup of stock can we do all that also with this?
Actually i read at two places how to go step by step,when to backup,going into recovery and wiping & reset the phone then again into recovery and navigate to the zip file of the rom and extract.But i do not know if it is same with Android flash recovery.
New Words For Me...........OMG why i came here hehehe
Syd_M said:
Well, I know that I spent a few days reading the sticky threads before I rooted my phone, but even then I managed to softbrick it for a couple of days (though it was sort of my fault, since I was using Linux at the time and all the instructions were for Windows, so I had to improvise). You shouldn't need to read every thread, though -- just the stickies should do.
Anyway, regarding Rom Manager, there's a warning in this thread (post #2) not to use it to install a recovery since the CWM version isn't compatible with our devices. As for a recovery you should use, I strongly recommend AmonRa 3.0.6 for a stable and bugfree recovery.
Edit: Just FYI, I installed my recovery using ADB and fastboot. It was quick and easy, the hardest part was installing the LG drivers and ADB (via installing the Android SDK).
____________________
Sent from the moon.
Click to expand...
Click to collapse
Dear you mentioned 'FYI', 'ADB' & 'Fastboot'..... i just heard about them once twice but don't know what are they. I am sorry this can be irritating for you and for me as well heheehe.Only lucky people can go through this smoothly otherwise i do not think i will recommend this to anyone at least before 7 years lol. But seriously i am confused
One more important thing
Syd_M said:
No, don't use ROM Manager. 3 years ago when @grigtm used it, it was fine. These days, however, the CWM version in ROM Manager is incompatible with our device. You will risk bricking your phone if you use ROM Manager. Personally, I advise against it.
As for the Android Flash Recovery program that was linked earlier, I haven't used it personally, but it seems easy enough to use. Just
1. Download Android Flash Recovery
2. Install the LG drivers (it's packaged with the program in a subfolder called "USB")
3. Enable USB debugging on your phone (Settings > Applications > Development > check USB debugging)
4. Start your phone in Fastboot Mode.
5. Connect your phone to the PC.
6. Start Android Flash Recovery and follow the instructions.
Click to expand...
Click to collapse
I have LG United Mobile driver already installed,that is enough?
kitu34 said:
Dear you mentioned 'FYI', 'ADB' & 'Fastboot'..... i just heard about them once twice but don't know what are they. I am sorry this can be irritating for you and for me as well heheehe.Only lucky people can go through this smoothly otherwise i do not think i will recommend this to anyone at least before 7 years lol. But seriously i am confused
Click to expand...
Click to collapse
There is absolutely no need to learn all of the language, especially when you're just starting out. It's enough in the beginning to just follow instructions, and only go into the details of the Android environment later as you gain more experience. No one becomes an expert overnight, after all.
As for the terms I used... FYI simply means "for your information", nothing to do with Android at all. ADB is the Android Debug Bridge, and like the name implies, it's like the "bridge" that connects your PC to your phone. Any desktop-based program or tweaking tool that communicates with your phone most likely uses ADB (such as SuperOneClick, which you used previously). Fastboot is one of the debugging modes available on the P500. There's no need to concern yourself with exactly what it does (and explaining it in detail is beyond the scope of this post); you simply need to know how to enter that mode when the instructions call for it. Basically, what I'm saying is that you don't need to understand things in detail, you just need to follow instructions. All the instructions you need are in the stickies; for now, ignore anything else that's not there (it'll only confuse you).
The LG Mobile United driver should work. If it doesn't simply install the other drivers.
Thanks alot for the concern
Syd_M said:
There is absolutely no need to learn all of the language, especially when you're just starting out. It's enough in the beginning to just follow instructions, and only go into the details of the Android environment later as you gain more experience. No one becomes an expert overnight, after all.
As for the terms I used... FYI simply means "for your information", nothing to do with Android at all. ADB is the Android Debug Bridge, and like the name implies, it's like the "bridge" that connects your PC to your phone. Any desktop-based program or tweaking tool that communicates with your phone most likely uses ADB (such as SuperOneClick, which you used previously). Fastboot is one of the debugging modes available on the P500. There's no need to concern yourself with exactly what it does (and explaining it in detail is beyond the scope of this post); you simply need to know how to enter that mode when the instructions call for it. Basically, what I'm saying is that you don't need to understand things in detail, you just need to follow instructions. All the instructions you need are in the stickies; for now, ignore anything else that's not there (it'll only confuse you).
The LG Mobile United driver should work. If it doesn't simply install the other drivers.
Click to expand...
Click to collapse
I really appreciate your concern for the safety of my phone.Thanks a lot.
Actually i was to read and follow the instruction as you told but since yesterday i was having headache coz of this and it was severe this morning and still can't open one eye heheehe Anyway i went with the Rom Manager coz of this even though it showed my phone as old BB.It was flashed in less than a minute.Then i switchd off the phone to enter into recovery by holding down Home Button + Volume Down + Power Button(button to switch off) but phone just reboots normally,no recovery set up. The thread i am following for instructions at XDA's How to's says i should not boot into recovery from thr rom manager and use only the buttons combination. But it is not happening,can you help in this?
Thanks again
kitu34 said:
I really appreciate your concern for the safety of my phone.Thanks a lot.
Actually i was to read and follow the instruction as you told but since yesterday i was having headache coz of this and it was severe this morning and still can't open one eye heheehe Anyway i went with the Rom Manager coz of this even though it showed my phone as old BB.It was flashed in less than a minute.Then i switchd off the phone to enter into recovery by holding down Home Button + Volume Down + Power Button(button to switch off) but phone just reboots normally,no recovery set up. The thread i am following for instructions at XDA's How to's says i should not boot into recovery from thr rom manager and use only the buttons combination. But it is not happening,can you help in this?
Thanks again
Click to expand...
Click to collapse
open RomManager and it should detect if you have or no recovery, it says under flashing recovery, if not use that tool I was directing you to and flash recovery, it is a safe tested tool
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
and do not ever boot into recovery from RomManager, actually after you flashed recovery, uninstall RomManager
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
maybe you did not pushed corectly the buttons, keep pressed home+vol down+power, after LG logo appears release power button
Stuck in fastboot mode
grigtm said:
open RomManager and it should detect if you have or no recovery, it says under flashing recovery, if not use that tool I was directing you to and flash recovery, it is a safe tested tool
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
and do not ever boot into recovery from RomManager, actually after you flashed recovery, uninstall RomManager
Click to expand...
Click to collapse
I pressed the buttons this time after the lg logo and it went in fastboot mode.What to do now?
kitu34 said:
I pressed the buttons this time after the lg logo and it went in fastboot mode.What to do now?
Click to expand...
Click to collapse
power off, boot into rom, and verify if recovery was flashed, if not do it again and not from RomManager
I just followed the instructions at XDA
grigtm said:
open RomManager and it should detect if you have or no recovery, it says under flashing recovery, if not use that tool I was directing you to and flash recovery, it is a safe tested tool
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
and do not ever boot into recovery from RomManager, actually after you flashed recovery, uninstall RomManager
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
maybe you did not pushed corectly the buttons, keep pressed home+vol down+power, after LG logo appears release power button
Click to expand...
Click to collapse
Instructions said to hold these buttons that's it.Now i read somewhere here to do it after LG logo. Fastboot mode started, udc_start()
So i recently bought a BLU Life Play X and decided that I was gonna start playing around with custom ROMS and such, since BLU was only at Android 4.2 I decided to try and get a custom ROM and run 4.4, came across a video: "Android 4.4.2 for BLU Life Play by Kerdel Green"
which led me to using the aforementioned custom ROM to flash my device, seemed ok at first, even though my phone could no longer vibrate and camera flash was now gone....trouble started when I decided enough was enough and I need to flash a new recovery and a ROM cuz I found sumn more stable and also from BLU themselves...plugged in the USB cable and noticed the phone would not connect...if that wasnt bad enough i downloaded ES file explorer transferred the new recovery and ROM over to the internal memory (wondered why the SD card xfer kept failing but i think now that is also a side effect of this horrible ROM) after which i tried to use mobileuncle to load the new recovery, I am assuming the new recovery is loaded problem is I cant restart the phone, noticed when I hold power button restart isnt there either. So now I am stuck inside this ROM unable to restart in recovery mode and unable to load a new ROM, any advise or help would be greatly appreciated.
Hi,
As there is no section on XDA for your device, you will need to ask for help here....
> General discussion > Questions and Answers
I see the are many models of your device also.... Please specify that when asking in above section.
Good luck!
---------- Post added at 09:02 AM ---------- Previous post was at 08:52 AM ----------
If, and I say if, this is your model exactly... This thread found by my colleague @dagger may help....
http://forum.xda-developers.com/showthread.php?t=2763291
I just bought the LYF Wind 1 Smartphone and couldn't find a proper way to root it, so I made up my weird way, which works perfectly fine and I'm sharing it with you guys..
Steps :-
Download Wind1Root.zip (mod edit: Please use the blue download button and not the green one.)
Extract it
Enable USB Debugging and connect the phone
Run unlock.bat
Enable USB Debugging again after reset
Run root.bat
UPDATE - Recovery replaced. Touch works now. Using Redmi 2 Recovery.
For any help, watch this video
or read the noob friendly guide at - http://www.ugeeky.com/how-to-root-lyf-wind-1/
i have unlocked bootloader.....and when i execute root.bat my lyf wind 1 shows twrp but in cmd it shows no device error....i have installed fastboot and adb
If anybody know how to replace Kinguser with SuperSU...
I tried installing Supersu-me and Superuser from playstore but none worked.
Supersu doesnt open. It stucks giving a black screen.
Its happening in my LYF wind 4.
If any custom recovery working, please do reply.
This worked well on my Lyf Wind 1 well. Not it is rooted with SU, But when i boot into recovery mode the TWRP has a bug and it shows only a blur screen after swipe to unlock. I need to power of and on again...
Bro can you please provide a root method for LYF flame 1 ? It will help me a lot !!
Need stock ROM and flasher for my Wind 1
What if something goes wrong when trying something new & attractive but UNSAFE?
If it's not available, then how to backup whole stock OS present in the phone right now?
Namashkaar ,
Thanks Harkunwar for sharing with us your brilliant work.
Can you be kind enough to confirm that
Build number and Base Band LYF_LS-5010_01_05_15
Kernel ver 3.10.49-perf [email protected] #1 sun may 15 00:51:15 cst 206
Android security patch 2016-05-01
is fit and qualifies for your script cause it seems that nothing happens on my device, can you plz help me in identifying in what I might be doing wrong ?
ibm_chandan said:
Namashkaar ,
Thanks Harkunwar for sharing with us your brilliant work.
Can you be kind enough to confirm that
Build number and Base Band LYF_LS-5010_01_05_15
Kernel ver 3.10.49-perf [email protected] #1 sun may 15 00:51:15 cst 206
Android security patch 2016-05-01
is fit and qualifies for your script cause it seems that nothing happens on my device, can you plz help me in identifying in what I might be doing wrong ?
Click to expand...
Click to collapse
That thing is working on that build number, I can personally confirm that, and as far as I know, it doesn't depend on that either. Check that fastboot is working properly
---------- Post added at 08:09 PM ---------- Previous post was at 08:06 PM ----------
Harkunwar said:
I just bought the LYF Wind 1 Smartphone and couldn't find a proper way to root it, so I made up my weird way, which works perfectly fine and I'm sharing it with you guys..
Steps :-
Download Wind1Root.zip
Extract it
Enable USB Debugging and connect the phone
Run unlock.bat
Enable USB Debugging again after reset
Run root.bat
For any help, watch this video
or read the noob friendly guide at - http://www.ugeeky.com/how-to-root-lyf-wind-1/
Click to expand...
Click to collapse
Which phone's recovery did you use? I want to port the rom for wind 1
@ Akash : Thanks for your input. Would you kind enough to post a link to fastboot , as ugeeky hosting sever is down. and I dont think the fastboot that I have is working properly. My Laptop is running Windows 10 Insider Preview 10.0.14393 64 bit . I hope it is not a problem .
Thanks again.
this is not working when i start root.bat it stucks up with a blur black screen and nothing happens I had to power off the device and power it back on. but the root did not happen, pls inform me what is the problem.
LeHarkunwar, A Big Thank You for coming up with the Root !! Have got rid of a lot of crap ware and unwanted stuff.
However, the points raised by "Java Baba" and "davinashgandi" deserve some attention. There has to be a tutorial/instructions for flashing stock firmware and stock recovery in the event that things go a little awry. A link to stock firmware and stock recovery with instructions for flashing the same is necessary and would decorate this wonderful work of yours.
Secondly, the twrp recovery is not at all functional when booted into. In such a case, applying incremental updates ( This Morning there is a new 37 MB update available) can soft brick the device.
The Wind 1 community will really appreciate if you can do something about this.
Again, Many Thanks for your superb work !!!
ibm_chandan said:
@ Akash : Thanks for your input. Would you kind enough to post a link to fastboot , as ugeeky hosting sever is down. and I dont think the fastboot that I have is working properly. My Laptop is running Windows 10 Insider Preview 10.0.14393 64 bit . I hope it is not a problem .
Thanks again.
Click to expand...
Click to collapse
you can visit this thread for downloading fastboot and adb drivers:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
---------- Post added at 03:02 PM ---------- Previous post was at 02:56 PM ----------
siddharth14 said:
LeHarkunwar, A Big Thank You for coming up with the Root !! Have got rid of a lot of crap ware and unwanted stuff.
However, the points raised by "Java Baba" and "davinashgandi" deserve some attention. There has to be a tutorial/instructions for flashing stock firmware and stock recovery in the event that things go a little awry. A link to stock firmware and stock recovery with instructions for flashing the same is necessary and would decorate this wonderful work of yours.
Secondly, the twrp recovery is not at all functional when booted into. In such a case, applying incremental updates ( This Morning there is a new 37 MB update available) can soft brick the device.
The Wind 1 community will really appreciate if you can do something about this.
Again, Many Thanks for your superb work !!!
Click to expand...
Click to collapse
Stock firmware is not modified by this method, and there's no way to backup the stock recovery until we get the factory firmware, for installing any zips to the system, you can always replace the update.zip with the file you want to flash( remember to rename the file you want to flash as update.zip) in the files folder and then run the root.bat file.
Thanks Aakash. Yes, I'm aware that this method doesn't modify stock firmware. The suggestion was made so that people with soft bricked device would be able to revert to stock firmware if anything went wrong.
As for recovery, I managed to download the stock firmware and extracted the stock recovery. I also successfully flashed the stock recovery over twrp. However, the 37 Mb update was aborted due to some mismatch. No idea how to get around this with stock recovery. Yes, it's possible over twrp like you said but I would prefer to apply it through stock recovery.
If only we had a functional custom recovery, things would be even better.
On a side note, has anybody been able to figure the rebranded model and company of Wind 1 ?
---------- Post added at 01:28 PM ---------- Previous post was at 01:15 PM ----------
Ok. I have tried flashing the downloaded update.zip via stock recovery and twrp but no success. I guess the only option left now is via sideload method. And if i'm not wrong then i would lose root if i installed it via adb sideload.
Slightly off topic, the voice Volume of Wind 1 appears low and somewhat muffled. It's not clear and loud like its in my MOTO G. Can fellow users please confirm this. I have also tried the *#4636#* code which opens the testing menu but it's of no use. Need some application or code to access the engineering menu via which we could increase the voice volume.
Hey bro,i am same version of Android on my Lyf wind 1,n I'm glad to have a solution that you came with, I want to upgrade my mobile to marshmallow(stock version), can you please instruct me how can I do that, I'll waiting 4 ur response, thank you
I humble request to help me in rooting lyf flame 2/!,
,plz plz just begging
Sent from my LS-4004 using Tapatalk
I m using windows 10 ...and when I try to open unload.bat file my Lyf wind 1 is rebooting and show android icon and stuck at there.... And cmd show's that waiting for device .....I have to open the bettry and re connect it for start my Lyf wind 1 and ... nothing happens
please can someone give me flashing tutorial for lyf wind 1 , my set is dead , its not powering on now ,
@harshad
Please ensure that you have properly installed drivers for LYF Wind 1. To check this, enable USB-Debugging and connect your LYF Wind 1 to PC. You will also get a message on your phone regarding granting authorization to your computer. Click on Yes. If you don't click on yes then you are bound to get the device not found or device offline errors !
While flashing, i got the device not found error a couple of times and i noticed that i hadn't granted authorization to my computer for USB debugging. The authorization window had popped on my mobile and i was too busy looking at my computer screen.
Now, open Device manager on your computer. Click on Scan for Hardware changes. If the drivers are not installed properly then you will see Yellow exclamation marks against your Android phone. Please install the USB drivers for LYF Wind 1. ( Google if you don't have the drivers)
You need to have;
1) ADB and Fastboot installed as Administrator
2) USB drivers for LYF Wind 1 installed
3) Allow OEM Unlocking , enabled via developer options.
4) Enable USB debugging , enabled via developer options.
If all the above things are in order then you shouldn't have any problems rooting LYF Wind 1 with Le Harkunwar's excellent tutorial.
---------- Post added at 04:19 PM ---------- Previous post was at 04:13 PM ----------
Amit2310 said:
please can someone give me flashing tutorial for lyf wind 1 , my set is dead , its not powering on now ,
Click to expand...
Click to collapse
Try a battery pull. Take out the battery and wait for 5-10 seconds. Insert the battery and now try powering up the device.
found this for stock rom installation incase something goes wrong http://giveawaytricks.in/install-stock-rom-on-lyf-wind-1-lyf-ls-5010/
Amit2310 said:
please can someone give me flashing tutorial for lyf wind 1 , my set is dead , its not powering on now ,
Click to expand...
Click to collapse
you need to download stock rom and flash that to make your phone work again. I found this site, zeon22 has also listed a site, but i found this to be more user friendly in downloading files.
http://repairmymobile.in/flash/lyf-wind-1-ls-5010-stock-rom/
---------- Post added at 04:36 AM ---------- Previous post was at 04:26 AM ----------
siddharth14 said:
Thanks Aakash. Yes, I'm aware that this method doesn't modify stock firmware. The suggestion was made so that people with soft bricked device would be able to revert to stock firmware if anything went wrong.
As for recovery, I managed to download the stock firmware and extracted the stock recovery. I also successfully flashed the stock recovery over twrp. However, the 37 Mb update was aborted due to some mismatch. No idea how to get around this with stock recovery. Yes, it's possible over twrp like you said but I would prefer to apply it through stock recovery.
If only we had a functional custom recovery, things would be even better.
On a side note, has anybody been able to figure the rebranded model and company of Wind 1 ?
---------- Post added at 01:28 PM ---------- Previous post was at 01:15 PM ----------
Ok. I have tried flashing the downloaded update.zip via stock recovery and twrp but no success. I guess the only option left now is via sideload method. And if i'm not wrong then i would lose root if i installed it via adb sideload.
Slightly off topic, the voice Volume of Wind 1 appears low and somewhat muffled. It's not clear and loud like its in my MOTO G. Can fellow users please confirm this. I have also tried the *#4636#* code which opens the testing menu but it's of no use. Need some application or code to access the engineering menu via which we could increase the voice volume.
Click to expand...
Click to collapse
I also received the update but I'm not interested in updating since my phone is running fine just now, I don't want to loose root or brick my phone while updating which will most probably be more bloatware(few more apps from reliance jio). I will wait if marshmallow arrives for flashing stock rom if it arrives (although chances are pretty slim). Meanwhile I'm working on a port of cyanogenmod for this device form Yu Yunique, the device from which harkunwar got this twrp from, but I'm still not able to resolve touchscreen driver issue. Info on this device is really limited, and i don't know anything except that this device is from zte.
I need help with my mtk6737m phone which i bricked in a really dumb way
I need help flashing it with SP Flash Tool which gives an error that says:
S_FT_ENABLE_DRAM_FAIL (0xFC0)
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it didnt work.
For some reason when i tried to boot to the custom recovery it didnt work, it went to the stock one
For some reason i got stuck in a boot animation too...
So then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the format all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Is there any way to fix my bricked phone? Its the only one I have :crying::crying::crying::crying:
dekannomad said:
I need help with my mtk6737m phone which i bricked in a really dumb way...
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following thread.
https://forum.xda-developers.com/showthread.php?t=3385527
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device but, you may be able to obtain some member guidance within the following thread.
https://forum.xda-developers.com/showthread.php?t=3385527
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Hello, I know how to use the flashtool, my phone is completlely bricked and doesnt turn on, thats what I dont know how to fix. I got a response from another user saying i lost imei and completlely removed everything inside my phone and said maybe i can get help here, so far nothing
dekannomad said:
Hello, I know how to use the flashtool, my phone is completlely bricked and doesnt turn on, thats what I dont know how to fix. I got a response from another user saying i lost imei and completlely removed everything inside my phone and said maybe i can get help here, so far nothing
Click to expand...
Click to collapse
This wasn't extremely clear...
There's really not much of anything on the forum regarding a Bricked H17.
The following links are probably the best you're going to be able to locate via a Google search.
The following is just a few guides (with downloads) for installing the Stock Firmware back to your device.
https://www.getdroidtips.com/stock-rom-on-homtom-ht17/
https://www.getdroidtips.com/install-official-stock-rom-on-homtom-ht17-pro/
https://romprovider.com/2018/02/install-official-firmware-homtom-ht17/
The following is just the download firmware from the HomTom website.
https://www.homtom.cc/DownFile
If your device is completely unresponsive (aka dead) then the only real option for you is either to return the item for a repair/replacement where you had purchased it or just to contact HomTom.
https://www.homtom.cc/about-us/
I'm sorry that I can't help you out any further than this...
I do wish you the best of luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
This wasn't extremely clear...
There's really not much of anything on the forum regarding a Bricked H17.
The following links are probably the best you're going to be able to locate via a Google search.
The following is just a few guides (with downloads) for installing the Stock Firmware back to your device.
https://www.getdroidtips.com/stock-rom-on-homtom-ht17/
https://www.getdroidtips.com/install-official-stock-rom-on-homtom-ht17-pro/
https://romprovider.com/2018/02/install-official-firmware-homtom-ht17/
The following is just the download firmware from the HomTom website.
https://www.homtom.cc/DownFile
If your device is completely unresponsive (aka dead) then the only real option for you is either to return the item for a repair/replacement where you had purchased it or just to contact HomTom.
https://www.homtom.cc/about-us/
I'm sorry that I can't help you out any further than this...
I do wish you the best of luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Sorry, english is not my main language, its actually portuguese
I'll do my best to explain what happened from the beggining:
My homtom had some issues like, when you used the camera in any app it was dark, and on instagram stories, there were glitches on the screen, green and purple stuff started appearing in the screen and you couldnt see what was happening, so i decided to change my rom to a custom one.
I saw some tutorials..... and after watching them i tried to install TWRP so i could flash the custom rom..
After installing TWRP it wasnt working, when i tried "volume up + power" it went to the stock recovery.
So i thought it was a good idea to select format + download on SPFlashtool so it formatted the phone reseted all the changes i made...
After clicking, the phone immediately shut off and SpFlashtool said: S_FT_ENABLE_DRAM_FAIL (0xFC0).
I dont know what i did but somehow i am not able to do anything on my phone, I tried new drivers, older firmware, stock firmware, different cable, different port, charging, but the phone doesnt even light up.
I think there must be a way to access the phone's storage and install android all over again but, what i dont know is how to do that. So thats why im seeking help, but no one seems to understand or know how to do that....
I hope you understand me now and know of a solution, if not, I appreciate that you tried to help me
if your phone have removable bettey, try only format option after remove bettery and after formate complet, download only rom with bettery..
---------- Post added at 04:39 PM ---------- Previous post was at 04:31 PM ----------
dekannomad said:
I need help with my mtk6737m phone which i bricked in a really dumb way
I need help flashing it with SP Flash Tool which gives an error that says:
S_FT_ENABLE_DRAM_FAIL (0xFC0)
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it didnt work.
For some reason when i tried to boot to the custom recovery it didnt work, it went to the stock one
For some reason i got stuck in a boot animation too...
So then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the format all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Is there any way to fix my bricked phone? Its the only one I have :crying::crying::crying::crying:
Click to expand...
Click to collapse
Sorry bro try format device without bettery and after format download rom with better...