Database Info

Flashing with Odin

2 hours instaling stock firmware and always some errors.So i install I9000XWJS8 on SGS i900.Using Odin 1.7.First didnt work several times till i woke up today and instal it Without Pit file.Phone run fine but than i tryed put Darky rom into SD card but i couldnt cause said it the eternal SD card was WRITE PROTECTED.
AFterwards decide instal over again with repartion.But this time says i need dam Pit file suddenly.So i put s1_odin_20100512.pit instal all goes fine. After finish phone boots to recovery system with errors
uPDATE MEDIA,please wait
Red Text*E:Cant Mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Cant mount DBDATA
Your Storage not prepared yet,please use UI menu for format and reboot actions
Red text (copy default media content failed)
Doing some format,phone boots SGS logo pass and than 3 times vibrate and black screen.
Tryed other Pit filles cause idk wat to do
s1_odin_20100513.pit
s1_odin_20100803.pit
IDk wat to do i did everythink i can think and find before post here so please reply.

[Q]My 9003 is broken

My 9003 can't work from last week.
I just got the "com.sec.android.app.twlaucher" broken(force close) and all other applications are also broken even I flashed with any new ROM.
The whole broken story is here:
1. I installed XXKPQ with CWM, and created a backup with CWM
2. Then flashed it with DDKP2 by Odin
3. I got a application broken, and tried to backup DDKP2 with CWM and stopped by incident
4. I tried to restore OS with the backup in step 1
5. I got many Force Close after I restored the OS
6. I tried to flash with any ROM, but always got Force close for any application(even the com.sec.android.phone)
Can anyone give advice for it?
Or I have to change a new memory chip?
Thanks!

realcode said:
My 9003 can't work from last week.
I just got the "com.sec.android.app.twlaucher" broken(force close) and all other applications are also broken even I flashed with any new ROM.
The whole broken story is here:
1. I installed XXKPQ with CWM, and created a backup with CWM
2. Then flashed it with DDKP2 by Odin
3. I got a application broken, and tried to backup DDKP2 with CWM and stopped by incident
4. I tried to restore OS with the backup in step 1
5. I got many Force Close after I restored the OS
6. I tried to flash with any ROM, but always got Force close for any application(even the com.sec.android.phone)
Can anyone give advice for it?
Or I have to change a new memory chip?
Thanks!
Click to expand...
Click to collapse
Dont restore the backup of one firmware over another firmware.
Flash xxkpe twice aand over it flash xxkpq with factory reset after flashing each time. Use this guideforum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003

I tried to format the data, but it didn't work. I can see the previous installed application broken even I flashed with new ROM(Re-partion).
It seems something was locked by system.

Follow this guide to flash XXKPQ Check if everything works well. Try to restore your CWM backup

I tried to flash XXKPE/XXKPQ, but I got a wrong message "E: failed to mount /data (Invalid argument)" when the phone startup".
And the phone repeated to restart, I can't the normal phone.
It seems there is something wrong with the partion of /data.
Is there other way to fix it?

the /data is ext4, I am not sure XXKPQ support ext4 or not.

When flashing XXKPE with pit and all the other stuff you should see Re-Partition checked. Then everything should be formatted with the standard RFS filesystem unless you convert it. The stock Kernel doesn't support ext4, but that doesn't mean that you can't try to flash a Kernel that supports ext4.
Did you let the phone boot up completly after every flash?

I didn't let XXKPE boot up completely after flash.
It seems that the /data partion was not reset in flashing with the "Re-partion" selected.
I got error message when I tried to check the disk status.
/sbin # fsck.ext4 /dev/block/mmcblk0p3
fsck.ext4 /dev/block/mmcblk0p3
e2fsck 1.41.6 (30-May-2009)
/dev/block/mmcblk0p3: recovering journal
fsck.ext4: unable to set superblock flags on /dev/block/mmcblk0p3

[SOLVED] super wiped -> cannot mount/access sdcard -> bricked?

hi, help would higly be appreciated because i think i bricked my beloved tf101g ;(
while testing some roms i used the Super Wipe Full from mike1986 (http://forum.xda-developers.com/showthread.php?t=1245892). this script failed - i don`t know why but (sh)it happend.
So my tf (b80, ww-epad-9.2.2.6-20120525) is wiped,
- no rom to start (last bevor wipe was CM10B2 - i think)
- cwm v5.8.1.8 touch starts but
- tells me: e:can`t mount /sdcard/
i spended hours on reading hundrets of "cannot mount" threads here but found no solution to my special situation. already tried several unbrick guides, did a hundred factory resets/formats in cwm, tried to mount data via cwm (error mounting /data), tried another microSD /btw: sdcard does not mean external sd but internal or am i wrong?), .... i cannot access the sdcard, so no way to flash another rom. adb is responding (0123456789ABCDEF recovery).
so, is there any way to use nvflash (b80!) oder adb (in recovery) to
a) get the sdcard back or
b) flash any rom / another recovery to get my tf back to life?
THANKS for any help!!!
*desperate* moscat

moscat said:
hi, help would higly be appreciated because i think i bricked my beloved tf101g ;(
while testing some roms i used the Super Wipe Full from mike1986 (http://forum.xda-developers.com/showthread.php?t=1245892). this script failed - i don`t know why but (sh)it happend.
So my tf (b80, ww-epad-9.2.2.6-20120525) is wiped,
- no rom to start (last bevor wipe was CM10B2 - i think)
- cwm v5.8.1.8 touch starts but
- tells me: e:can`t mount /sdcard/
i spended hours on reading hundrets of "cannot mount" threads here but found no solution to my special situation. already tried several unbrick guides, did a hundred factory resets/formats in cwm, tried to mount data via cwm (error mounting /data), tried another microSD /btw: sdcard does not mean external sd but internal or am i wrong?), .... i cannot access the sdcard, so no way to flash another rom. adb is responding (0123456789ABCDEF recovery).
so, is there any way to use nvflash (b80!) oder adb (in recovery) to
a) get the sdcard back or
b) flash any rom / another recovery to get my tf back to life?
THANKS for any help!!!
*desperate* moscat
Click to expand...
Click to collapse
look for easyflasher by whitekidney, it might help, it returns u back to stock, then u can root again and install recovery.

Thanks catfishbilly, unfortunalty whitekidney says:
Does NOT work for: TF101G (TF101 3G)
already tried peri 0.4 - which also didn`t helped me out.
not shure wether i did something wrong or tf101g is really not supported.
any other ideas? Thanks in advance!

found this solution: http://forum.xda-developers.com/showpost.php?p=24007127&postcount=276
Code:
mounted the external sd as /data
mount /dev/block/mmcblk1p1 /data
adb push recovery.zip /data/media/recovery.zip
then go to 5.5.0.4 recovery , install , choose , and boom : recovery.zip ¡¡¡
recovery flashed , and rom flashed
I cant believe how easy it was to end , 5.5.0.4 is finally able to read external sd with this cheat.
AND: SUCCEEDED - Rogue on my tf101g, access to external!
problem with /data/ still exists, hope to find another thread with a solution....
Thanks to this great forum,

Hi
I'm having some problems before super wipe:
I used Super Wipe Full to erase everything because I was facing some problems on it.
I used a lot of rooms before.
Now I can just access CWM and when I try to install the room, it says: "no files found". I think is isnt reading the external sd.
I tried to send the from via cable, but my computer don't install the driver for it. I also tried to install the driver via asus page.
Any solution?
Thank you...

What am I missing??

I was trying to install a custom ROM on my infuse, but bricked it. Now I ODIN back and can get to either the CWM recovery screen OR the Android system recovery 3e screen but here is where it gets weird, I cannot figure out for the life of me why I cannot flash from a zip file, I always end up with both recoveries telling me that my storage is not pre-paired yet. The read out goes some thing like this:
--Copying media files...
E:failed to mount /dbdata (file exists)
E:copy_dbdata_media: Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
Please if anyone has a idea, shoot me your thoughts. Thanks in advance

What rom are you trying to flash?
You are on stock froyo, correct?
What method are you using to get cwm?
Sent from my sweet & buttery Infuse

please help me!!!
i have the same problem rogers infuse

dormankenneth said:
I was trying to install a custom ROM on my infuse, but bricked it. Now I ODIN back and can get to either the CWM recovery screen OR the Android system recovery 3e screen but here is where it gets weird, I cannot figure out for the life of me why I cannot flash from a zip file, I always end up with both recoveries telling me that my storage is not pre-paired yet. The read out goes some thing like this:
--Copying media files...
E:failed to mount /dbdata (file exists)
E:copy_dbdata_media: Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
Please if anyone has a idea, shoot me your thoughts. Thanks in advance
Click to expand...
Click to collapse
try this:
reboot recovery
factory reset
wipe cache
wipe d cache (in advanced options on cwm)
got to mounts and storage
format system
format boot
format cache
and format data
flash rom
after rom is done flashing
wipe cache & D cache again reboot
hope this helps, if not checkout this thread should help you skip a few steps >>>> HERE

[Completed] How to lagfix when speedMod deleates CWM? this or other fix for Internal SD card prob

I tried upgrading my old phone,a S1 i9000 to cm10 which resulted in a bunch of errors. I than tried to flash back to stock,however i was still getting:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
system unable to Format /data...Internal SD card cannot be mounted and such.
I first tried flashing dbdata.rfs,didn't help
Then i tried doing this http://forum.xda-developers.com/showthread.php?p=30415128#post30415128 (Flash a JVU+Root with a 512 Pit (repartition ticked) ...)
I also tried flashing just pit with rep,and then JVU, ( http://forum.xda-developers.com/showthread.php?t=817186 )
Then i found this- http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335
And tried to flash a speedmod kernel (fixed JVU kernel) in order to get the "universal lag fix menu" on cwm. However after i flash it i don't have cwm anymore.
I've been working on this for hours...please help.. What do i do?
EDIT: Flahsed very old version stock jp something,got same message on recovery but then booted into...cm10 . I just got the boot and then black screen.

Reposted here
http://forum.xda-developers.com/showthread.php?t=3473748
Thread closed