Database Info

[Completed] Unrooted Alcatel OneTouch Pop C7 suddenly in bootloop?

Hi all,
I have this unrooted Alcatel OneTouch Pop C7 (2040A) that has been working fine for the past year until now when it suddenly goes in bootloop at the startup animation (Alcatel OneTouch logo). On the last successful boot, "android.process.acore" began to stop unexpectedly making several applications including "Contacts", "File Manager" and "Phone" unusable. A hard reset was performed via recovery mode clearing user data/cache partition, "Enable ADB" returns message "file not found". The first screen that appears during boot (network operator logo) will rarely be visually corrupted. Can anyone point me in the right direction to what could be done please?
Thanks in advance.

Hello,
Welcome to XDA.
I'm not finding a specific place for your device/issue. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.

Thanks for your advice.

[Completed] Stuck in what I believe is a boot loop (Alcatel OneTouch POP C7)

Hi,
I'm a noob to Android & everything related to it, but I decided to take a leap into the world and flash a custom recovery and ROM. I installed CMW (version from 07.04.2014 19:07:38) and then tried to install Cyanogenmod 12 which was made for the POP C7. This is where it went wrong. After the installation completed, my phone got stuck in an endless loop. It goes like this:
Black screen
Logo (Alcatel One Touch Pop C7)
White screen
See 1
I have now tried to install 'CYANOGENMOD 12.1 Beta 6 by Favio Rdz' which did change the first startup screen into a blue CyanogenMod logo but the white screen is still there and I can't get any further.
I can still acces the CWM recovery and do basic things using ADB.
I can provide any information or files needed - I just want my phone fixed.
Thanks in advance,
Dylan.

Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!

[Completed] Zenfone 6 black screen after wrong flashing

Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!

Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist

[Completed] No Command screen? Help?

I decided to click the wireless update provided in the phones settings. Now it's stuck showing No Command screen. I have managed to enter the recovery stage and try several of the options on this screen but with no success. I have homtom ht7. What should I do??

Ask here
http://forum.xda-developers.com/general/help
Good luck

[Completed] My LG Nexus 4 seems to be in a bootloop, what can i do to fix it?

Hello everyone, I'm desperate for help! :crying:
I am new to the Android customization world and the first ROM I tried to install on my mobile phone may have bricked it
I was following this tutorial (androidrootz.com/2013/02/how-to-install-custom-roms-on-nexus-4.html), and he told me to install ClockworkMod Recovery on my Nexus . So I followed the tutorial to install ClockworkMod (androidrootz.com/2012/12/how-to-install-clockworkmod-recovery-on.html), but after "step 11" when I hit "Reboot the system now" my Nexus does not want to boot anymore.
Apparently the phone is in a bootloop, because the logo of Google appears on the screen and after some time it restarts again. Also i can access Bootloader Mode, but when i hit recovery mode the phone resets and enters the eternal loop again.
Please, someone know some way or how to fix it?
Regards.

lflavioreis said:
Hello everyone, I'm desperate for help! :crying:
I am new to the Android customization world and the first ROM I tried to install on my mobile phone may have bricked it
I was following this tutorial (androidrootz.com/2013/02/how-to-install-custom-roms-on-nexus-4.html), and he told me to install ClockworkMod Recovery on my Nexus . So I followed the tutorial to install ClockworkMod (androidrootz.com/2012/12/how-to-install-clockworkmod-recovery-on.html), but after "step 11" when I hit "Reboot the system now" my Nexus does not want to boot anymore.
Apparently the phone is in a bootloop, because the logo of Google appears on the screen and after some time it restarts again. Also i can access Bootloader Mode, but when i hit recovery mode the phone resets and enters the eternal loop again.
Please, someone know some way or how to fix it?
Regards.
Click to expand...
Click to collapse
Greetings and welcome to assist. Don't worry your phone is not bricked only in bootloop, there is a link to all the guides here
http://forum.xda-developers.com/nexus-4/general/index-nexus-4-roms-kernels-mods-guides-t3201708
and this thread will help you get out of bootloop
http://forum.xda-developers.com/nexus-4/general/index-nexus-4-roms-kernels-mods-guides-t3201708
we are a friendly and helpful bunch at xda, if you ask for help in the nexus 4 forums the experts will help you
Good Luck
Sawdoctor