[Completed] Stuck in what I believe is a boot loop (Alcatel OneTouch POP C7) - XDA Assist

Hi,
I'm a noob to Android & everything related to it, but I decided to take a leap into the world and flash a custom recovery and ROM. I installed CMW (version from 07.04.2014 19:07:38) and then tried to install Cyanogenmod 12 which was made for the POP C7. This is where it went wrong. After the installation completed, my phone got stuck in an endless loop. It goes like this:
Black screen
Logo (Alcatel One Touch Pop C7)
White screen
See 1
I have now tried to install 'CYANOGENMOD 12.1 Beta 6 by Favio Rdz' which did change the first startup screen into a blue CyanogenMod logo but the white screen is still there and I can't get any further.
I can still acces the CWM recovery and do basic things using ADB.
I can provide any information or files needed - I just want my phone fixed.
Thanks in advance,
Dylan.

Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!

Related

[Completed] [Q] Anything Optimus ZONE

Hello everybody, I have a optimus zone that I am trying to fix. When I first aquired it it was stuck in a boot loop. Was able to put it in download mode and after finding about 5 or so drivers (seperately) i was able for lg support tool to put an upgrade on the phone. When it was done it was still in boot loop. I set the phone aside for a few days and when i came back to it it was not in boot loop and went to the activation screen on the phone, but before i could do anythin the phone force closed process after process after process includes the launcher that runs the phone. So i did another firmware upgrade to the phone and it is now stuck in boot loop again but this time it is not fixing it self. I cannot get into recovery mode like it doesnt have one, since the beginning i was unable to get recovery mode. What i am looking for is any help and where i can find recovery"s for the phone and the phone"s stock rom files. I have looked everywhere and for the life of me i can not find any recovery modes or stock roms for this phone!
Hi,
You need to ask this in the Android Q and A section since Optimus Zone doesn't have a dedicated forum to itself:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good Luck!
Thank you. Thread closed!

[Completed] Phone stuck on boot screen because of deleting boot screen in ROM manager.

I recently installed custom rom on my phone then i downloaded twrp recovery manager or maybe it was rom installer in my android . Through one of those apps i installed custom boot screen then I decided to change it after few reboots because it was taking longer then the default boot screen so i deleted thought it would go back to default boot screen automatically so to check i restarted my device and phone got stuck at start up screen. I was trying to get my recovery back which wasnt working so i could install custom rom now the phone is stuck at start up and recovery doesnt work already what should i do to fix this epic problem i really dont want to lose my phone over custom roms lol ? Help would be much appreciated .
Thank you.
Sir,
I already give you an answer here: http://forum.xda-developers.com/gen...roid-phone-t3017734/post58544676#post58544676
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Stock ROM for Vodafone Speed Tab 6 VF-1397

Hi,
Does anyone know where I might find a stock ROM for the Vodafone Speed Tab 6 VF-1397?
Mine has a corrupted ROM after installing SuperSU with Super Sume over KingRoot. I didn't like KingRoot as it's intrusive and sends data back to some git and didn't have a fraction of the functionality of SuperSU.
Now It loads to a black screen where all I can do is reboot or shutdown. I am able to access Android Recovery but that's about it. I have already performed factory reset ect, which is what has lead to the black screen boot as previously it was stuck in a boot loop after uninstalling KingRoot.
Would really appreciate some help to stop this thing going in the bin.
Cheers.
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!

[Completed] Zenfone 6 black screen after wrong flashing

Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!
Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist

[Completed] need help !!!! my digiflip xt811 pro tablet dosent boot .

the tablet is stuck on the boot logo screen, it dosen't move into the boot animation it stays there only.
HOW IT HAPPENED: my tab is more than a year old , its been rooted
before the problem occurred i was facing some problems like titanium backup acting strangely and the tablet rebooting itself occasionally on the same day.
as it was lagging later during the day i thought il reboot it, that was it , it hasnt booted since yet.
i am able to get the device into the boot loader, connect adb and emulate the CWM recovery , but jus two movements in the recovery causes the device to shut down.
kindly help me to fix this device ,
regards.
Hi,
Thanks for using XDA assist.
I couldn't find any useful information that would help solve your problem.
Instead, please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios

Categories

Resources