why does it unconnected to WiFi after screen off? - HTC One A9

I missed some WhatsApp calls at home and noticed that it's getting unconnected to WiFi after screen is off for some minutes. Mobile data is off at home and I checked WiFi always connected in WiFi advanced settings . What is 4he problem?

Had this issue with cm on My Samsung S5 mini. Used the APP "wifi stay Connect" to solve the issue. Otherwise check the s5 mini cm forum in xda for more ideas.

Related

[Q] E-Mails Notification delayed when connected to my WIFI

Hello,
I´m using a Nexus S with Stock Android 4.1.1 and I have the problem that I receive whatsapp messages and emails with a 10 minute delay.
This only happens when I´m connected to my WIFI and when the phone is in standby mode for aprox 1 hour.
When I´m connected to mobile network I receive the messages immediately.
Has anyone got an advice for me to solve this problem?
Best regards,
Marius
Settings --> WiFi --> Menu / Advanced --> Sleep Policy
You probably disable your data when your at home, so you wont get notifications from a data connection and the sleep policy would be set up to turn off wifi if it's not in active use.
The sleep policy says that the wifi should stay connected when the Phone goes into standby.
I have looked at the wifi symbol in the statusbar during the last days, and I have seen that the symbol is grey very often.
That means that the phone has no Internet connection.
I think it has something to do with my wifi router.
But I have no idea how to solve this issue :/

T-Mobile WiFi Calling

My WiFi calling is not working on my Z3. Since I have that feature turned ON, an error message is indicated right underneath the label where you turn it ON or OFF. I can't remember the exact message since it only seems to happen at work. While connected to the WiFi at work, I have no problem with connecting to the internet. Anyone else having the same issue?
Maybe it has something to do with SIP ALG or Firewall settings on the router? On some routers it causes issues. I have no such issues though.
Better explanation about SIP ALG and VoIP:
https://support.gradwell.com/entrie...y-does-Gradwell-recommend-that-I-turn-it-off-
I didn't have any problem with WiFi calling at work when I had my LG G2 though....
Sent from my D6616

Anyone else have this happening?!

Sometimes I'll be doing something on my phone and the connected to wifi network notification pops up like it's just reminding me that I'm connected or something? It doesn't seem like it's ever losing wifi connection and I checked the speeds and everything is fine so why does it randomly say that in my notification bar for a couple seconds?
Sent from my Galaxy S6 ~
There is wifi notification setting in your wifi settings, just uncheck that and it'll go away.
Sent from my SM-G920V using XDA Free mobile app

[Help][SG Note 4 SM-910G LP 5.0.1]Issue with wifi, wifi hotspot and mobile network

Dear xdaians
I am getting some problems in my new Note 4 SM 910G[India] after updating to the lollipop.
1. The wifi is getting turned ON automatically. Even if i turn it OFF, the next moment it will turn ON. This affecting the WiFi hotspot. Whenever i try to turn ON the wifi hotspot, after some time it will show one message "Turning on wifi will disable the WiFi hotspot" and WiFi turns ON automatically. So i have to use the "Forget network" option to get out from the wifi network. But it becomes really hectic. I googled the same but could not get similar ones or others are getting the problem like WiFi is turning OFF automatically.
2. Mobile network is getting disconnected. I don't see any problem with network operator or the SIM tray. Sometimes the "Network mode" option will be cleared automatically and no operators are available in "Network operators" and mobile is disconnected. It requires a restart to connect the mobile to the network back. If i try to select any option in "Network mode", the option becomes disabled!.
Any solution for the above two issues?. Divert the thread if you have any known solutions.
Thanks and regards,
Prajeesh
prajeeshxrd said:
Dear xdaians
I am getting some problems in my new Note 4 SM 910G[India] after updating to the lollipop.
1. The wifi is getting turned ON automatically. Even if i turn it OFF, the next moment it will turn ON. This affecting the WiFi hotspot. Whenever i try to turn ON the wifi hotspot, after some time it will show one message "Turning on wifi will disable the WiFi hotspot" and WiFi turns ON automatically. So i have to use the "Forget network" option to get out from the wifi network. But it becomes really hectic. I googled the same but could not get similar ones or others are getting the problem like WiFi is turning OFF automatically.
2. Mobile network is getting disconnected. I don't see any problem with network operator or the SIM tray. Sometimes the "Network mode" option will be cleared automatically and no operators are available in "Network operators" and mobile is disconnected. It requires a restart to connect the mobile to the network back. If i try to select any option in "Network mode", the option becomes disabled!.
Any solution for the above two issues?. Divert the thread if you have any known solutions.
Thanks and regards,
Prajeesh
Click to expand...
Click to collapse
Sometimes you will need to wipe the device after a lollipop update so it should be stable.
Newyork! said:
Sometimes you will need to wipe the device after a lollipop update so it should be stable.
Click to expand...
Click to collapse
Thanks Newyork!. The wifi issue got resolved after executing the wipe. However the network issue is still present and one another issue came up now is with bluetooth. Bluetooth control stops sometimes (Even-though it is connected ).

Trouble sigin in wifi network

I was able to sign my wifi network (wpa2-psk) but after login it will give me error.
Unable to connect to wifi network. Sign in procedure not supported.
Anyone know a way to fix it?
Just for testing, switch yout WLAN to WEP.
Gruß Kai
WPA-PSK works for me with my Cisco access point for what it's worth.
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
WEP doesn't work, my home router and office all got the same problem. But if i open AP hotspot from my phone it works...
Is your Network visible? Try what happens if it is visible. Another Test, try your WLAN open without Encryption.
Gesendet von meinem SM-G925F mit Tapatalk
Yes visible, tried open also won't work. Its weird only work if i AP from my phone. Other wifi network will let me pass thru authentication and i see the obtaining ip message and connected but after few sec it will give me the "Unable to connect to wifi network. Sign in procedure not supported".
Wifi Connection
Having the exact same problem. Anyone able to troubleshoot this matter
After the last update Gear S2 WiFi connection support passwords long not over 12 characters.
Before update I was connected to my WEP (13 HEX couples of characters, that is 26 characters). After update I cannot succeed in connecting any more.
I asked to Sumsung support and they suggest me to shorten the password...
Now I have shifted to WPA encryption with password long 8 characters and now the Gear S2 connects with no issues.
GS
ITALY
I too am having wifi connection problems. I have the Gear S2 AT&T model SM-R730A
I was getting the message sign-in procedure not supported and what I found was, since this device has no browser to input the login- username and password, you get that message.
Really Samsung? You stick a wifi radio in this thing but can't connect to most wifi's out there.
Went into my Samsung account and synced my wifi logins from my phone to gear S2 and now they are saved on the gear S2 and it logs in without the message (not supported).
Only problem is, it says it's connected to the wifi, but nothing works on that network from the gear. Still not logged in to the wifi network I believe. But then why does it say connected.
It works great on a wifi network that only requires a password, but as you know most hotels and other hot spots require username and password in a browser.
I do not have a sim card yet because if I can't get the wifi to connect and work, I'll probably sell it.
Anyone have an idea what to do next? That includes you SAMSUNG! And YES I called your service techs and they are pretty much clueless about the Gear S2.
ravenjim said:
I too am having wifi connection problems. I have the Gear S2 AT&T model SM-R730A
I was getting the message sign-in procedure not supported and what I found was, since this device has no browser to input the login- username and password, you get that message.
Click to expand...
Click to collapse
You are mistaken.
You have to turn BT off to get wifi to actually turn on. If BT is on and connected, the watch will use PAN for networking, and not turn on the wifi radio.
Turn off BT. Shortly after, you can see APs listed in the wifi section of Connections that the watch is receiving. If you tap on one that is not already saved, it will prompt for a password that can be entered with the tiny keyboard.
If a saved AP won't connect, tap on it and hit the FORGET button. Then follow the above procedure.
Keep in mind that as long as BT is turned off, you will be connected "remotely", so notifications will be slower, and some functions are not available (controlling media on the phone from the watch, for example). Also, if you have a 3G version, outgoing calls will use the watch standalone number over 3G, not the phone.
dwallersv said:
You are mistaken.
You have to turn BT off to get wifi to actually turn on. If BT is on and connected, the watch will use PAN for networking, and not turn on the wifi radio.
Turn off BT. Shortly after, you can see APs listed in the wifi section of Connections that the watch is receiving. If you tap on one that is not already saved, it will prompt for a password that can be entered with the tiny keyboard.
If a saved AP won't connect, tap on it and hit the FORGET button. Then follow the above procedure.
Keep in mind that as long as BT is turned off, you will be connected "remotely", so notifications will be slower, and some functions are not available (controlling media on the phone from the watch, for example). Also, if you have a 3G version, outgoing calls will use the watch standalone number over 3G, not the phone.
Click to expand...
Click to collapse
Thank You for responding, but you must be missing something from my post.
Bluetooth connection to phone must be in standby mode, not actually turned off and then wifi will put it into remotely connected status. At this time you are able to connect to wifi networks that only require a password. I am able to do this much and it works fine.
It's when it needs to be authenticated (an open wifi with no lock shown but needs a username and password entered) as with most public wifi, and that's when it gives the sign in procedure not supported error even when synced wifi profiles from phone have been saved to gear s2.
I hope I'm missing something here but I've been working on this for awhile and nothing seems to work. Samsung techs are useless as we are on our own and I do appreciate any and all help.
Thanks Again!
no ravenjim, you are correct. I have the same issue at my job. We have an open wifi here at my job which allows all the employees to connect to using their phones or tablets and even personal laptops. However once connected you are taken to a AT&T welcome page with our company info and logo and are required to just hit connect. Once you click connect you can surf the internet with your personal devices.
So since the S2 does not have a browser I get the same error "sign in procedure not supported". Sucks but oh well
Does anyone experiencing low wifi signal on your gear s2 classic (wifi only)?? I did some test with my other samsung device in same position and get maybe 3 or 4 signal bar, but only 1 signal bar on my gear s2 sometimes no signal at all.
Is there any solution for this bug yet?
yes before the last update on my gear s2 classic SM-R732 everything was fine, now with the latest update R732XXU2CPC4 i can't get login to my wifi networks, and also the battery is easier to get drain, usually 1,5 days with several push notification, auto wake up gesture ON, moderate Heart Rate, brightness level on 7, watch faces using classic with black background + grande dial + date, but now i must charge the phone every 6-7 hours with the same setting, already factory reset the phone and still got the same situation. Is there another way to fix this rather than waiting the new updates? If possible i'll choose the previous firmware/software on my phone
I am having a similar problem with my WiFi connection, gear s2 was connecting fine to my home and work network for about a month now with no problems, suddenly today the same error msg posted here is appearing whenever i try to connect to my wifi at home, i did restart both phone and watch, also changed my wifi setting to visible and shortened my password, all with no luck, still getting same error msg...
Still got to try to reset the watch... Will that wipe out all my watch faces? Probably will... But if that doesn't fix it I won't be able to send my watch faces back from my PC, which is why i wanted to connect remotely in the first place, so i can install a new watch face...
Any suggestions?
Anyone solved thos problem?
P. S. I have a classic non lte version
Okay, how can we connect to public wifi at a library, mall, xfinity/comcast, starbucks, etc. where we are normally redirected to a browser to accept terms of service, or to sign on using account credentials before connecting to their wifi?
I requested that my work manually register my watch's mac address on the network, so it is saved as a device that has access. So you might want to reach out to your network team for a solution.
A question about using public WiFi. Is there any security risk to the watch in addition to the phone?

Categories

Resources