Hi, i have a strange problem..
When i plug in a gamepad through otg cable, it works only for 2-3 minutes.. Then my gamepad stops working, and i must reboot my s6 because pc doesn't see it.. Only charging is working. Tried a 2 otg cables, same issue..
Any ideas?
(Sorry for my bad english)
Azyl said:
Hi, i have a strange problem..
When i plug in a gamepad through otg cable, it works only for 2-3 minutes.. Then my gamepad stops working, and i must reboot my s6 because pc doesn't see it.. Only charging is working. Tried a 2 otg cables, same issue..
Any ideas?
(Sorry for my bad english)
Click to expand...
Click to collapse
Have you tried a different game pad to rule that out, might not play nicely with the s6
sofir786 said:
Have you tried a different game pad to rule that out, might not play nicely with the s6
Click to expand...
Click to collapse
Nope, maybe it will work with other gamepad, i must check it.
Now OTG is not working anymore.. My S6 does not recognize any pendrive.. Only charging and PC mtp is working.. Help
Azyl said:
Now OTG is not working anymore.. My S6 does not recognize any pendrive.. Only charging and PC mtp is working.. Help
Click to expand...
Click to collapse
Are you rooted or completely stock. You have 2 or 3 options I think. To rule out anything hardware related, if you have root do wipe in twrp/cwm dalvik and cache, if that doesn't work reinstall rom, I that still doesn't work then flash a clean firmware through odin. Before doing any of that try a different otg cable.
So.. i do FULL wipe, reflashed my rom, and... nothing. Tried 2 different OTG cables.
Azyl said:
So.. i do FULL wipe, reflashed my rom, and... nothing. Tried 2 different OTG cables.
Click to expand...
Click to collapse
The only other thing is to do a firmware flash through odin, if it still doesn't work then it points to some sort of hardware issue.
Ok so flashing firmware didn't work. I'll buy a new OTG cable and check it again, if won't work i need to replace a part of my s6 where is micro usb port.. :/
Related
Hi all,
My Droid charge decided to do something weird today; it no longer will USB mount! This problem is particularly bad because, while I can put the phone in download mode, my computer will not recognize the USB and ODIN (1.2 & 1.8) cannot wipe the phone.
Any suggestions? I really need my phone back, but I'm not sure what to do.
Tried reinstalling the USB Samsung Drivers, using the original data cable, and two different computers (Win7). SD card will mount in an external drive (aka without the phone), and the phone will charge via USB. I have the most recent form of CWM on it, and the EP4P debloated and rooted rom.
Thanks,
frak
frickandfrak said:
Hi all,
My Droid charge decided to do something weird today; it no longer will USB mount! This problem is particularly bad because, while I can put the phone in download mode, my computer will not recognize the USB and ODIN (1.2 & 1.8) cannot wipe the phone.
Any suggestions? I really need my phone back, but I'm not sure what to do.
Tried reinstalling the USB Samsung Drivers, using the original data cable, and two different computers (Win7). SD card will mount in an external drive (aka without the phone), and the phone will charge via USB. I have the most recent form of CWM on it, and the EP4P debloated and rooted rom.
Thanks,
frak
Click to expand...
Click to collapse
That happened to me a while back. Mine had the added bonus of going into desk dock mode and staying there. It was a hardware issue with the USB port. It would charge, but nothing else. Mine did become intermittent though, and cycling the cable in and out seemed to help it some, but ultimately, I had to send it in for replacement
frickandfrak said:
Hi all,
My Droid charge decided to do something weird today; it no longer will USB mount! This problem is particularly bad because, while I can put the phone in download mode, my computer will not recognize the USB and ODIN (1.2 & 1.8) cannot wipe the phone.
Any suggestions? I really need my phone back, but I'm not sure what to do.
Tried reinstalling the USB Samsung Drivers, using the original data cable, and two different computers (Win7). SD card will mount in an external drive (aka without the phone), and the phone will charge via USB. I have the most recent form of CWM on it, and the EP4P debloated and rooted rom.
Thanks,
frak
Click to expand...
Click to collapse
What cable are you using? I accidentally grabbed my charging-only cable the other day and didn't realized it only had the wires for positive and negative. No data pins.
Is it the cable that came with your Droid?
Another thread similar. Check it out and try some.
http://forum.xda-developers.com/showthread.php?t=1356825
phone goes into download mode but not recognized by odin. as soon as it gets into download mode box pops up saying usb not recognized. uninstalled drivers several times, tried different usb ports and cables. has worked fine for a long time until when i tried today. any ideas????
tracyt said:
phone goes into download mode but not recognized by odin. as soon as it gets into download mode box pops up saying usb not recognized. uninstalled drivers several times, tried different usb ports and cables. has worked fine for a long time until when i tried today. any ideas????
Click to expand...
Click to collapse
Had that yesterday. A different port worked fine for me. Maybe a couple of power cycles will do the trick.
Sent from my SCH-I510 using xda premium
got it, usb driver was missing... back to happy flashing. thanks for the quick response
tracyt said:
got it, usb driver was missing... back to happy flashing. thanks for the quick response
Click to expand...
Click to collapse
Can you point me to the drivers you installed? Thanks in advance.
I am having same problem and going nuts. I have Galaxy S2. I CAN connect to windows and Kies when phone is booted up but can not connect while in download mode. On Andoid System Recovery <3e>, I tried to do factory reset and wipe cache but no vain. Still getting usb not recognized.
Back in Feb i was suscessuful on installing all_in_one_odin_ep4d. My pc pick up the USB connection and i was able to get the com 3 on odin.
Now i'm tryin to bring phone back to factory. and having issues getting the usb connection. i have the samsung drivers.
I also tried on 2 other laptops and no USB.
I also tried the SDCard patch and not sure if i did that right ??
Thanks
janey
janey6152 said:
Back in Feb i was suscessuful on installing all_in_one_odin_ep4d. My pc pick up the USB connection and i was able to get the com 3 on odin.
Now i'm tryin to bring phone back to factory. and having issues getting the usb connection. i have the samsung drivers.
I also tried on 2 other laptops and no USB.
I also tried the SDCard patch and not sure if i did that right ??
Thanks
janey
Click to expand...
Click to collapse
If cwm is installed use the cwm factory zip to restore to stock
Sent from my Galaxy Nexus using xda premium
Did you try any other cables? That can cause a problem too...
Still Charged Up
Reilly1812 said:
Did you try any other cables? That can cause a problem too...
Still Charged Up
Click to expand...
Click to collapse
I was trying to use a USB extension cable and it wouldn't work. Then I tried it without the extension and it works fine.
Tried different usb plug connection , tried different wire nothing..
I have ROM Manager
Can i use that ?
janey6152 said:
Tried different usb plug connection , tried different wire nothing..
I have ROM Manager
Can i use that ?
Click to expand...
Click to collapse
That's a big NO NO..
SENT FROM THE DOG POUND
OK so How do i get it back to Stock ???
the cwm factory zip to restore to stock How do i do that ????
help Can't get USB reconzied on pc using odin com
help Can't get USB reconzied on pc using odin com
[Q] Can't get OTG to wok on NEXUS 4
I've flashed stock Kitkat and Installed Ziddey's custom kernel, got an OTG cable and made a Y USB cable, doesn't work =/ the only thing that happens is the phone charges.
The OTG cable is working just fine with the dok i tried to connect, I checked both on another device, the only thing I did to the stock android is installing the kernel.
I've also downloaded an app to check if OTG is enabled on my device and the result is positive.
Seems like the only thing I could have messed up is the Y cable, but it pretty simple- connect the wires to their matching color and isolate.
Please help me figure this one out, and if someone can post this on Ziddey's Thread I'd be grateful :silly:
I'm currently at B540 and my otg pendrive is not working with my phone and my phone only shows charging when connected to my computer. I updated to B540 recently in hope that the problem would be fixed, but I have been facing this problem since i upgraded to lollipop. Please help.
Hardware issue
There can be multiple possibilities.....
1. Your sync cable is bad or damaged .
2. There is some problem with your pc.
3. You've got a bad usb jack on your phone.
Solutions
1. Try with a different cable, make sure you don't use generic ones... I used some earlier and they caused a problem every now and then.
2. Try on a different laptop or pc
3. Update latest huawei drivers, and also update adb drivers just in case.
4. You can also try to hard reset the phone.
And if nothing works, get your USB jack checked.
There are 4 connections on the jack
2 are for charging and 2 are for Data sync purposes
Maybe you've a broken connection or something.
Tyadav1 said:
There can be multiple possibilities.....
1. Your sync cable is bad or damaged .
2. There is some problem with your pc.
3. You've got a bad usb jack on your phone.
Solutions
1. Try with a different cable, make sure you don't use generic ones... I used some earlier and they caused a problem every now and then.
2. Try on a different laptop or pc
3. Update latest huawei drivers, and also update adb drivers just in case.
4. You can also try to hard reset the phone.
And if nothing works, get your USB jack checked.
There are 4 connections on the jack
2 are for charging and 2 are for Data sync purposes
Maybe you've a broken connection or something.
Click to expand...
Click to collapse
My phone is not working with other computers and other phones are working with my computer. Same is the case with my pendrive.
I think there is a problem with a driver or something in my phone.
If this is the case, Try to reflash the firmware.....
Tyadav1 said:
If this is the case, Try to reflash the firmware.....
Click to expand...
Click to collapse
should i try flashing marshmallow ?
Sure you can try it.
But i do not think this is a software issue anymore....
Your USB jack on the phone needs a checkup
Facing the same problem on Honor 6
H60-L04
B520
5.1.1
EMUI 3.1
I too am facing the same problem. After doing a factory reset, it seemed working fine for a few days and now i still continue to have the same problem.
Looking for some geeks to provide a solution to this issue. Definately it is not a USB port issue.
Uh! I was on B510, and just flashed B520 to upgrade to marshmallow..... If this is a software issue. Just upgrade it to marshmallow
Hello,
I'm having a problem with my Unlocked Galaxy S6 (SM-G920F) When i plug the USB to transfer data from my PC, it only detects it as charging, and yes, i know i should change to MTP in the notification center, but i don't get that option, I've enabled it manually in the developers option, also enabled USB Debugging Nothing. Then I've rebooted to TWRP , still nothing. Tried connecting via ADB Doesn't detect it.(I'm sure that cable works , tried it with my Galaxy S5 mini , it works), So i went to Download Mode, Fastboot commands doesn't work , but weirdly it detects in Odin. Good, not great. I've decided to revert back to stock, flsahed the latest firmware. booted still nothing just says Cable Charging as if it is connected to a wall plug.
I don't know what do now .
Any help?
OussamaOuartasi said:
Hello,
I'm having a problem with my Unlocked Galaxy S6 (SM-G920F) When i plug the USB to transfer data from my PC, it only detects it as charging, and yes, i know i should change to MTP in the notification center, but i don't get that option, I've enabled it manually in the developers option, also enabled USB Debugging Nothing. Then I've rebooted to TWRP , still nothing. Tried connecting via ADB Doesn't detect it.(I'm sure that cable works , tried it with my Galaxy S5 mini , it works), So i went to Download Mode, Fastboot commands doesn't work , but weirdly it detects in Odin. Good, not great. I've decided to revert back to stock, flsahed the latest firmware. booted still nothing just says Cable Charging as if it is connected to a wall plug.
I don't know what do now .
Any help?
Click to expand...
Click to collapse
Did you try using different USB cables?
CroGamer1 said:
Did you try using different USB cables?
Click to expand...
Click to collapse
Yes . Matter of a fact when i got the phone the cable used to work . Now it works on other phones except on my S6
OussamaOuartasi said:
Yes . Matter of a fact when i got the phone the cable used to work . Now it works on other phones except on my S6
Click to expand...
Click to collapse
Odd. Did you also try it on a different PC or another USB port on the PC?
CroGamer1 said:
Odd. Did you also try it on a different PC or another USB port on the PC?
Click to expand...
Click to collapse
I have 4 USB ports tried them all, and I've said that other phones work with my PC.
OussamaOuartasi said:
I have 4 USB ports tried them all, and I've said that other phones work with my PC.
Click to expand...
Click to collapse
My S6 does a continues connected/disconnected loop on my laptop but on a desktop PC it runs great. Other phones also run great on the laptop so it's possible that you too have an isolated case.
A dumb suggestion, did you try clearing the cache? Try downloading Samsung Smart Switch on your PC and run the built in device driver reinstall function.
CroGamer1 said:
My S6 does a continues connected/disconnected loop on my laptop but on a desktop PC it runs great. Other phones also run great on the laptop so it's possible that you too have an isolated case.
A dumb suggestion, did you try clearing the cache? Try downloading Samsung Smart Switch on your PC and run the built in device driver reinstall function.
Click to expand...
Click to collapse
I did install Samsung Smart Switch , and i cleared the cache. And about my laptop as i said my S6 used to work fine not cut in connection . It just happend suddenly . That the phone only recognise the Lapto as a wall charger except in download mode.
OussamaOuartasi said:
I did install Samsung Smart Switch , and i cleared the cache. And about my laptop as i said my S6 used to work fine not cut in connection . It just happend suddenly . That the phone only recognise the Lapto as a wall charger except in download mode.
Click to expand...
Click to collapse
I personally think that it's a computer problem rather than a phone problem. If you flashed stock ROM only and didn't touch anything special it MUST work because we would have seen people complaining by now. I'm still holding onto the idea to check the phone with another PC. IDK, maybe you somehow blocked the phone on the laptop? (Download mode and "OS mode" are different things so that would clarify why the laptop detects the phone in ODIN mode)
CroGamer1 said:
I personally think that it's a computer problem rather than a phone problem. If you flashed stock ROM only and didn't touch anything special it MUST work because we would have seen people complaining by now. I'm still holding onto the idea to check the phone with another PC. IDK, maybe you somehow blocked the phone on the laptop? (Download mode and "OS mode" are different things so that would clarify why the laptop detects the phone in ODIN mode)
Click to expand...
Click to collapse
I've tried hooking it up with a different working laptop , same problem. I even tried OTG Flash drive on the OS, and mounting it in TWRP no Luck.