OTG pendrive and connecting to pc not working - Honor 6, 6 Plus Q&A, Help & Troubleshooting

I'm currently at B540 and my otg pendrive is not working with my phone and my phone only shows charging when connected to my computer. I updated to B540 recently in hope that the problem would be fixed, but I have been facing this problem since i upgraded to lollipop. Please help.

Hardware issue
There can be multiple possibilities.....
1. Your sync cable is bad or damaged .
2. There is some problem with your pc.
3. You've got a bad usb jack on your phone.
Solutions
1. Try with a different cable, make sure you don't use generic ones... I used some earlier and they caused a problem every now and then.
2. Try on a different laptop or pc
3. Update latest huawei drivers, and also update adb drivers just in case.
4. You can also try to hard reset the phone.
And if nothing works, get your USB jack checked.
There are 4 connections on the jack
2 are for charging and 2 are for Data sync purposes
Maybe you've a broken connection or something.

Tyadav1 said:
There can be multiple possibilities.....
1. Your sync cable is bad or damaged .
2. There is some problem with your pc.
3. You've got a bad usb jack on your phone.
Solutions
1. Try with a different cable, make sure you don't use generic ones... I used some earlier and they caused a problem every now and then.
2. Try on a different laptop or pc
3. Update latest huawei drivers, and also update adb drivers just in case.
4. You can also try to hard reset the phone.
And if nothing works, get your USB jack checked.
There are 4 connections on the jack
2 are for charging and 2 are for Data sync purposes
Maybe you've a broken connection or something.
Click to expand...
Click to collapse
My phone is not working with other computers and other phones are working with my computer. Same is the case with my pendrive.
I think there is a problem with a driver or something in my phone.

If this is the case, Try to reflash the firmware.....

Tyadav1 said:
If this is the case, Try to reflash the firmware.....
Click to expand...
Click to collapse
should i try flashing marshmallow ?

Sure you can try it.
But i do not think this is a software issue anymore....
Your USB jack on the phone needs a checkup

Facing the same problem on Honor 6
H60-L04
B520
5.1.1
EMUI 3.1
I too am facing the same problem. After doing a factory reset, it seemed working fine for a few days and now i still continue to have the same problem.
Looking for some geeks to provide a solution to this issue. Definately it is not a USB port issue.

Uh! I was on B510, and just flashed B520 to upgrade to marshmallow..... If this is a software issue. Just upgrade it to marshmallow

Related

[Q] USB Storage Problem

I don't know if this is a problem with my USB cable, or my phone, or maybe even my Powermac G5. Lately, the USB transfer hasn't been working on any ICS rom on my Mac. It works fine on the PC, but on the Mac I have to use USB storage in Clockwork Recovery.
Today, for the first time, I tried it even in CWM and the Mac told me it was opening it with limited use, and that I should back it up as soon as I can and reformat/repartition/basically fix it. I've never had that happen before.
resetreflectt said:
I don't know if this is a problem with my USB cable, or my phone, or maybe even my Powermac G5. Lately, the USB transfer hasn't been working on any ICS rom on my Mac. It works fine on the PC, but on the Mac I have to use USB storage in Clockwork Recovery.
Today, for the first time, I tried it even in CWM and the Mac told me it was opening it with limited use, and that I should back it up as soon as I can and reformat/repartition/basically fix it. I've never had that happen before.
Click to expand...
Click to collapse
Sounds like you might need drivers for Mac...?
EDIT:
http://groups.google.com/a/googlepr...gory-topic/mobile/android-devices/QOBO4TavZCk
Seems to say that changing the USB port might help.

Galaxy S6 not recognized on PC or ADB

Dear,
My Galaxy S6 SM-G920F with lollipop 5.1.1
AP : G920FXXU2BOG8
CSC : G920FOJV2BOG8
has stop being recongnized by pc, i almost tries anything i know and find on net.
The pc doesn't recongnise it on device manager (i have a win 7 pc), the phone however react as pluged in a charger.
their is no mtp or mass storage switch on notification.
i have reinstall the driver of samsung several times with smart switch & also made it manual by suppressing directrly the samsung usb driver from programs on control panel then reinstall it but no hope.
I can't figure out eitheir its hard or soft.
i had change my cable & also test my pc with another Galaxy s6 it works fine, but mine no.
i have made wipe cache / factory reset also made an initialisation from parameters the phone is formated but not recognised by the pc also test it on another pc but the same behaviour windows pcs doesn't recognise my phone.
However, i figure out that when its on the restore mode (volume down + lock + home) the pc recognise it by Odin and smart switch.
i install the same rom on it also made an emergency restore with S/N and model and the process completes fine with smart switch and i saw the donwload progress bar completing on my phone.
but still i m stuck its not recognised please help !!!
i tries to use *#0808# and its on AP / MTP + ADB but no hope
i plug it on ADB android studio but the device list is empty :'(
Try installing latest version of Kies to install updated Samsung drivers.
roydok said:
Try installing latest version of Kies to install updated Samsung drivers.
Click to expand...
Click to collapse
I m having both the latest SmartView & Kies 3
i have done as asked but still no usb detection even after reinstalling usb driver
Try using a different USB cable or different USB port.
roydok said:
Try using a different USB cable or different USB port.
Click to expand...
Click to collapse
i used different cables and pcs but still not recognised
yesterday i used odin with those options :
BL/AP/CP/CSC and checked
Auto-reboot
F.reset Time
phone EFS Clear
Phone bootloader update
it has taking some while to execute but after that my phone was working and detectable again by my pc the problem was resolved for a couple of hours, in the evening the problem occured again.
and i have tried the process again the same why but no connection at all.
i don't know if its a hardware problem or software related problem
because the usb work when i m in restore mode (Odin mode) otherwise no.
Its an advance problem i already check all about usb / cable and pcs related problem.
Problem resolved
I sent my S6 to Samsung SAV it take them 4 days.
they doesn't give me proper answers on what they have done but i saw that my mini-usb plug is new so i expect that they got this part changed accrodingly the samsung has no sign of damage its a clean operation.
Its now detectable. It was indeed a Hardware problem
i have the same issue but in a g928f
today i changer my lcd with the micro usb flex
so all is new except the main board and still is not recognised at any pc with any cable.
i am really starting to feel very sorry for this phone.
odin does not see it at all even at download mode.
i don't know what else to do.
Software or Hardware Issue
I have a s6 920t that I am suppose to pay for at the end of the day. I got it from a friend who bought it while overseas. The only time my computer detects it is in download mode/odin mode, I hear the sound and I see it as "Added". When I try to connect any other way I don't hear the sound my laptop makes when it has detected a new device also otg cables don't work. I just simply want to know if this a software or a hardware issue? Software I can fix but if it is hardware I don't want to waste my money. Please anyone reply as soon as you can so I can decide what to do.
Thank you
I have two S6 Edge and one of them started doing this (phone only appears on USB when in Download mode). When swapping the motherboard between the phones, it works. So the problem isn't with the motherboard, but the USB connection module attached with the ribbon cable... There must be a chip on the module which gets locked somehow and replacing the board is at least one way to fix it. Hopefully someone finds another method without replacing the charger board?

D820 "Unkown Device"

Hi, I have a problem here, I bough a very, VERY cheap D820 to a guy I met a few days ago, he told me that he was trying to root the phone and he somehow bricked it so he was selling it half priced, anyway, the problem is that I cannot get the phone to be recognized by any PC running Windows OS or Linux based OS. Linux does nothing at all, and windows says "Unknown Device" every time I connect the device.
I downloaded Google drivers, Android SDK Drivers, Universal Naked Drivers and had no luck at all, windows says the best fitting driver is installed allready (Unknown Device). Also there's no OTG detection either. I can only charge the phone but there's no data transfer of any kind, I've even tried with different usb cables with no luck.
I noticed that the device have installed TWRP 3.0.2-0, the OS instaled was Official 4.4.2 and there wasn't any SMS app installed, not even Google Play or any file explorer app so I went to my other phone, downloaded NitrogenOS along with Pico GAPPS, did a full wipe (DATA, DALVIK, CACHE, SYSTEM) and flashed the ROM and GAPPS. The phone booted just fine, there's no issue with the OS, WiFi works very well, also LTE and H+, bluetooth, I mean everything, yet, the problem persist, I cannot get the device to be recognized by any PC.
Can anyone help me? I don't know what to do next.
PS: I can access bootloader and recovery without any issue yet, adb and fastboot doesn't recognize the device even with debugging turned on.
Sounds like the USB flex cable in the phone is damaged.
Tried different USB cables and USB ports?
audit13 said:
Sounds like the USB flex cable in the phone is damaged.
Tried different USB cables and USB ports?
Click to expand...
Click to collapse
Yeah, I tried 4 different fully working USB cables (tested them on my Motorola Moto G xt1032), I think the micro USB port on the Nexus its ok because I can charge the phone normally without any problem at all, the issue comes when I try to connect the device to any PC or OTG adapter to transfer files and such.
Sent from my Moto G using XDA-Developers mobile app
I believe It's possible that the phone USB flex cable is damaged even though it charges but will not transfer data.
Agree, most likely the USB port. Not a difficult or expensive part to replace.

Weirdest Problem i had on a Phone ever.

Hello,
I'm having a problem with my Unlocked Galaxy S6 (SM-G920F) When i plug the USB to transfer data from my PC, it only detects it as charging, and yes, i know i should change to MTP in the notification center, but i don't get that option, I've enabled it manually in the developers option, also enabled USB Debugging Nothing. Then I've rebooted to TWRP , still nothing. Tried connecting via ADB Doesn't detect it.(I'm sure that cable works , tried it with my Galaxy S5 mini , it works), So i went to Download Mode, Fastboot commands doesn't work , but weirdly it detects in Odin. Good, not great. I've decided to revert back to stock, flsahed the latest firmware. booted still nothing just says Cable Charging as if it is connected to a wall plug.
I don't know what do now .
Any help?
OussamaOuartasi said:
Hello,
I'm having a problem with my Unlocked Galaxy S6 (SM-G920F) When i plug the USB to transfer data from my PC, it only detects it as charging, and yes, i know i should change to MTP in the notification center, but i don't get that option, I've enabled it manually in the developers option, also enabled USB Debugging Nothing. Then I've rebooted to TWRP , still nothing. Tried connecting via ADB Doesn't detect it.(I'm sure that cable works , tried it with my Galaxy S5 mini , it works), So i went to Download Mode, Fastboot commands doesn't work , but weirdly it detects in Odin. Good, not great. I've decided to revert back to stock, flsahed the latest firmware. booted still nothing just says Cable Charging as if it is connected to a wall plug.
I don't know what do now .
Any help?
Click to expand...
Click to collapse
Did you try using different USB cables?
CroGamer1 said:
Did you try using different USB cables?
Click to expand...
Click to collapse
Yes . Matter of a fact when i got the phone the cable used to work . Now it works on other phones except on my S6
OussamaOuartasi said:
Yes . Matter of a fact when i got the phone the cable used to work . Now it works on other phones except on my S6
Click to expand...
Click to collapse
Odd. Did you also try it on a different PC or another USB port on the PC?
CroGamer1 said:
Odd. Did you also try it on a different PC or another USB port on the PC?
Click to expand...
Click to collapse
I have 4 USB ports tried them all, and I've said that other phones work with my PC.
OussamaOuartasi said:
I have 4 USB ports tried them all, and I've said that other phones work with my PC.
Click to expand...
Click to collapse
My S6 does a continues connected/disconnected loop on my laptop but on a desktop PC it runs great. Other phones also run great on the laptop so it's possible that you too have an isolated case.
A dumb suggestion, did you try clearing the cache? Try downloading Samsung Smart Switch on your PC and run the built in device driver reinstall function.
CroGamer1 said:
My S6 does a continues connected/disconnected loop on my laptop but on a desktop PC it runs great. Other phones also run great on the laptop so it's possible that you too have an isolated case.
A dumb suggestion, did you try clearing the cache? Try downloading Samsung Smart Switch on your PC and run the built in device driver reinstall function.
Click to expand...
Click to collapse
I did install Samsung Smart Switch , and i cleared the cache. And about my laptop as i said my S6 used to work fine not cut in connection . It just happend suddenly . That the phone only recognise the Lapto as a wall charger except in download mode.
OussamaOuartasi said:
I did install Samsung Smart Switch , and i cleared the cache. And about my laptop as i said my S6 used to work fine not cut in connection . It just happend suddenly . That the phone only recognise the Lapto as a wall charger except in download mode.
Click to expand...
Click to collapse
I personally think that it's a computer problem rather than a phone problem. If you flashed stock ROM only and didn't touch anything special it MUST work because we would have seen people complaining by now. I'm still holding onto the idea to check the phone with another PC. IDK, maybe you somehow blocked the phone on the laptop? (Download mode and "OS mode" are different things so that would clarify why the laptop detects the phone in ODIN mode)
CroGamer1 said:
I personally think that it's a computer problem rather than a phone problem. If you flashed stock ROM only and didn't touch anything special it MUST work because we would have seen people complaining by now. I'm still holding onto the idea to check the phone with another PC. IDK, maybe you somehow blocked the phone on the laptop? (Download mode and "OS mode" are different things so that would clarify why the laptop detects the phone in ODIN mode)
Click to expand...
Click to collapse
I've tried hooking it up with a different working laptop , same problem. I even tried OTG Flash drive on the OS, and mounting it in TWRP no Luck.

HELP! Can't connect to PC

Hi guys, i'm getting this problem and cant connect to pc and i think i've tried it all.
when i connect my phone to the PC, it stars charging but my pc doesn't recognize the device, and my phone doesn't show the notification to make it file transfer.
Could it be a computer issue?
it seems not, i've uninstalled and installed drivers (ADB and Fastboot, oneplus drivers, google drivers) and the problem persist, and even try it on another computer and its the same, the phone does not appear even on Device Manager.
Could it be the Cable?
I don't think so, i'm using the original oneplus cable, it use to work really well before, and i have even connect other phone with the same cable and the other phone is recognize by the computer, so it''s not a cable issue... but I still when to a Tech-store and try other USB-C cables with their computer but my issue still persist (phone isn't recognize, just charge).
Could it be a phone software issue?
Maybe? but i discover this issue 3 weeks ago and a i was on EVOX rom and i thought it would be solved flashing another rom, and i CLEAN FLASH Resurrection Remix Rom, but then the problem was still there!
cant connect even on FASTBOOT MODE...
BTW, before installing RR, i Installed OOS 10.3.4, and still my computer doesnt recognize the phone, YES i have enabled developer options and USB debugging is enabled, and USB PREFERENCES to File transfer, but its not helping me, the "usb for" option its all grayed out and cant change that.
Right now i'm stuck on a RR build without Gapps, and i lost ROOT and RECOVERY, and as you may think, i cant install any of them because i cant connect to my pc, so i'm in a pretty difficult situation here hehe, could you please help me out?
This helped me. Hope it works for you too
I can't paste the link but search "how to get your Android device to show up in file explorer" by how to geek.
Didn't work
xnruaa said:
I can't paste the link but search "how to get your Android device to show up in file explorer" by how to geek.
Click to expand...
Click to collapse
Thanks for your reply, but this didn't work because my device isn't shown on device & printers, or anywhere as far as i checked...
PROBLEM SOLVED.
I think this is the silliest solution I've ever seen, it was just DUST, i clean my USB-C PORT (with a mask xD) and then pluggin, AND VOILA, it worked!!! so keep your ports clean everyone

Categories

Resources