Suddenly my mobile is switch off.after it showing a message like reset.once resetting click on button. but didn't reset. Coming screen lenovo startup image only. i am waiting 1 hour bud didn't reset my mobile.please help me my friends.
Encryption unsuccessful!!!
Hello,
I am new to this forum. I was working on my phone. Suddenly it get switched off. when I switched it on the screen says that "Encryption Unsuccessful" and there is reset option below it. When I pressed reset button, it took me to the twrp recovery. Now If I am flashing any of the ROM it says :
E: Unable to mount "/system"
E: Unable to mount "/cache"
E: Unable to mount "/data"
E: Unable to mount internal storage
What should I do now????
Guys plzzz help me to fix this problem!!!!! :crying:
anurag_shiva said:
Hello,
I am new to this forum. I was working on my phone. Suddenly it get switched off. when I switched it on the screen says that "Encryption Unsuccessful" and there is reset option below it. When I pressed reset button, it took me to the twrp recovery. Now If I am flashing any of the ROM it says :
E: Unable to mount "/system"
E: Unable to mount "/cache"
E: Unable to mount "/data"
E: Unable to mount internal storage
What should I do now????
Guys plzzz help me to fix this problem!!!!! :crying:
Click to expand...
Click to collapse
TWRP --> "Wipe" --> "Avanced Wipe"
Mark only 1 partition at a time and try
"Repair or Change File System" --> either "Repair" or "Change File System" (Most commonly "Ext4" but depends on phone)
What is your specific phone model?
LS.xD said:
TWRP --> "Wipe" --> "Avanced Wipe"
Mark only 1 partition at a time and try
"Repair or Change File System" --> either "Repair" or "Change File System" (Most commonly "Ext4" but depends on phone)
What is your specific phone model?
Click to expand...
Click to collapse
Sir, my device is lenovo a6000plus & I have done the same as you have instructed but it's not working. It says that unable to repair & unable to mount internal storage.
What should I do now??? Please help if it is possible.
anurag_shiva said:
Sir, my device is lenovo a6000plus & I have done the same as you have instructed but it's not working. It says that unable to repair & unable to mount internal storage.
What should I do now??? Please help if it is possible.
Click to expand...
Click to collapse
HERE you can find everything you need, stock recovery, firmware and a installation guide.
LS.xD said:
HERE you can find everything you need, stock recovery, firmware and a installation guide.
Click to expand...
Click to collapse
Actually the problem is that the storage is showing 0mb and whenever I am doing anything like flashing other rom or trying to format any of the data ,cache or internal it says unable to mount. Even l have tried QFIL to flash the firmware but it's also failed. Please tell me something.
Is the stock recovery working?
TWRP 3 already tried?
Possible simple solution: but you will LOSE EVERY FILE on userdata.
Step 1: Install TWRP
Step 2: Go to Wipe box
Step 3: Select Advanced Wipe
Step 4: Check "DATA" and tap on "Repair or Change File System".
Step 5: Tap Change File System
Step 6: See original format on file system (EXT4). So turn to other (e.g. ext3) and switch back to original
Now /data is mounted back.
You can also try to erase the partitions using fastboot commands
fastboot erase cache
fastboot erase system
fastboot erase userdata
LS.xD said:
HERE you can find everything you need, stock recovery, firmware and a installation guide.
Click to expand...
Click to collapse
LS.xD said:
Is the stock recovery working?
TWRP 3 already tried?
Possible simple solution: but you will LOSE EVERY FILE on userdata.
Step 1: Install TWRP
Step 2: Go to Wipe box
Step 3: Select Advanced Wipe
Step 4: Check "DATA" and tap on "Repair or Change File System".
Step 5: Tap Change File System
Step 6: See original format on file system (EXT4). So turn to other (e.g. ext3) and switch back to original
Now /data is mounted back.
You can also try to erase the partitions using fastboot commands
fastboot erase cache
fastboot erase system
fastboot erase userdata
Click to expand...
Click to collapse
I have done all these several times and as you have said that change ext4 to ext3 then revert to original. I have done this and it is changed to ext3 but not coming to ext4 again. When I restart my phone then automatically they are changed to ext4.
And yes I have also flashed stock recovery and it is working. But now I am in TWRP recovery.
What should I do now???
Images are attached.
anurag_shiva said:
I have done all these several times and as you have said that change ext4 to ext3 then revert to original. I have done this and it is changed to ext3 but not coming to ext4 again. When I restart my phone then automatically they are changed to ext4.
And yes I have also flashed stock recovery and it is working. But now I am in TWRP recovery.
What should I do now???
Click to expand...
Click to collapse
Have you tried the fastboot way?
Erase or format command
LS.xD said:
Have you tried the fastboot way?
Erase or format command
Click to expand...
Click to collapse
Yes I have run all the commands you told me to run but there is no change the same error message appears after doing this what to do next.???
anurag_shiva said:
Yes I have run all the commands you told me to run but there is no change the same error message appears after doing this what to do next.???
Click to expand...
Click to collapse
I tried my very best.
can anyone plzz tell me how to resolve this issue
whenever i am running any command on my lenovo A6000plus it shows error in twrp recovery
E:unable to mount system
E:unable to mount cache
E:unable to mount data
plz tell me how to get out of this probem. I can't flash any ROM @LS.xD
Related
Moderator Notes: I was asked to sticky this thread as it seems to be a recurring issue and a couple of fixes are in the posts.
Sorry my bad english am latin.
Hi guys first thread here and i need your help. Here s the thing, i was using my tf700, browsering, and the tablet goes off, i tried start up and a bootloop appears. So i go to Recovery (latest TWRP) and i tried to flash a ROM (latest crombi kk), like always i tried to wipe cache and dav bfore flash it but that proces seems to fail, and a couple of messages like unable to mount /data unable to mount /system appears, first time happening, i never had troubles with the tablet. So i tried to get fastboot mode and run the fastboot erase cach command (i read in a forum dat some guy did that and work for him), so i download the adb fastboot files, i connect the tf700 to my laptop (windows 7 64bit) and a installing drivers message and i wait and the driver that is called Transformer did not install, i dont know where to get those drivers, i found a file Asus usb drivers and bla bla but when i unzip the file i get 3 folders and no .exe or installer. So i tried to continue and i enter fastboot mode in the tablet and connect usb tablet-pc, and now another driver installing message appears, now is a driver called Fastboot, so i wait anda again the driver did not install correctly. So i continue and open cmd and tried the comman for erase cache, and only appears the WAITING FOR DEVICE text. i donw know waht to do, i also tried flashing again a ROM, bt only bootloop, trie again to wipe cache and dav but is only unable to mount /data. Any ideas ????
formobicho said:
Sorry my bad english am latin.
Hi guys first thread here and i need your help. Here s the thing, i was using my tf700, browsering, and the tablet goes off, i tried start up and a bootloop appears. So i go to Recovery (latest TWRP) and i tried to flash a ROM (latest crombi kk), like always i tried to wipe cache and dav bfore flash it but that proces seems to fail, and a couple of messages like unable to mount /data unable to mount /system appears, first time happening, i never had troubles with the tablet. So i tried to get fastboot mode and run the fastboot erase cach command (i read in a forum dat some guy did that and work for him), so i download the adb fastboot files, i connect the tf700 to my laptop (windows 7 64bit) and a installing drivers message and i wait and the driver that is called Transformer did not install, i dont know where to get those drivers, i found a file Asus usb drivers and bla bla but when i unzip the file i get 3 folders and no .exe or installer. So i tried to continue and i enter fastboot mode in the tablet and connect usb tablet-pc, and now another driver installing message appears, now is a driver called Fastboot, so i wait anda again the driver did not install correctly. So i continue and open cmd and tried the comman for erase cache, and only appears the WAITING FOR DEVICE text. i donw know waht to do, i also tried flashing again a ROM, bt only bootloop, trie again to wipe cache and dav but is only unable to mount /data. Any ideas ????
Click to expand...
Click to collapse
More likely your data partition got corrupted.
Try wiping it or formatting /data in TWRP to see if that helps? You will lose everything if you don't have backups.
sbdags said:
More likely your data partition got corrupted.
Try wiping it or formatting /data in TWRP to see if that helps? You will lose everything if you don't have backups.
Click to expand...
Click to collapse
i already tried that, wiping (cache, dav, system, ata, factoty reset) anything gives the unable to mount /data error.
formobicho said:
i already tried that, wiping (cache, dav, system, ata, factoty reset) anything gives the unable to mount /data error.
Click to expand...
Click to collapse
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
sbdags said:
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
first of all is an honor chat with the legend sbdags!!! second can u guide me step by step. i did enter in twrp and go to advanced then terminal command then a selection menu appear and said browse to starting folder and a list of folder appears and a botton with Select Folder, wich folder i must select now? i tried just hit the select folder button and then i put the command taht u said and in the terminal said mke2fs 1.41.14 (22-dec-2010) nothing more and nothing happen
sbdags said:
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
Thank you so much sbdags.
You're a life save thought I had softbricked my tf700
Muchas gracias
formobicho said:
first of all is an honor chat with the legend sbdags!!! second can u guide me step by step. i did enter in twrp and go to advanced then terminal command then a selection menu appear and said browse to starting folder and a list of folder appears and a botton with Select Folder, wich folder i must select now? i tried just hit the select folder button and then i put the command taht u said and in the terminal said mke2fs 1.41.14 (22-dec-2010) nothing more and nothing happen
Click to expand...
Click to collapse
Did you unmount data first?
---------- Post added at 07:25 AM ---------- Previous post was at 07:24 AM ----------
chukkie said:
Thank you so much sbdags.
You're a life save thought I had softbricked my tf700
Muchas gracias
Click to expand...
Click to collapse
You are welcome!
EDIT - somehow the format finally took.. after 5 or 6 reboots.. very strange
okay, i hate to bump this thread. but i have been searching for a few nights and i cannot find a solution. i am having the same problem as OP.
Essentially, my tablet was interrupted mid format. I believe my data partition is corrupted. I can access recovery/fastboot and the tablet accepts commands from my PC. i have TWRP 2.7.1.1 on the tablet right now.
i tried what sdbags said:
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
this did not work. i got the same "mke2fs 1.41.14 (22-dec-2010)" output, and then the tablet rebooted back into TWRP over again. (data was not mounted, i cannot mount it at all)
some more output from my tablets TWRP console:
Code:
e:could not mount/data and unable to find crypto footer.
e:unable to mount '/data'
e:unable to recreate /data/media folder/
updating partition details...
e:unable to mount '/data'
e:unable to mount internal storage.
e:unable to mount /data/media during gui startup
full selinux support is present.
e:unable to mount /data/,edia/twrp/.twrps when trying to read settings file.
e:unable to mount '/data'
is there another way to fix my corrupted partition?
this did not work. i got the same "mke2fs 1.41.14 (22-dec-2010)" output, and then the tablet rebooted back into TWRP over again. (data was not mounted, i cannot mount it at all)
Click to expand...
Click to collapse
I have exactly same situation
edit: after running this command
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
it prompt
Starting Path : /external_sd
Click to expand...
Click to collapse
and there is also button "KILL" when I hit enter it prompt : /dev/block/mmcblk0p8 is appereatly in use by the system: Will not make a file system here!
Any advice? (sry for being this big noob!)
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
sbdags said:
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
Click to expand...
Click to collapse
Wouw thanks for so fast reply :highfive:.
But I think I'll disepoint you "usb debugging is disabled"
---------------------------------------------------------------------------------------------------------------
Any way I can reinstall stock from fastboot? damn it......
brinza said:
Wouw thanks for so fast reply :highfive:.
But I think I'll disepoint you "usb debugging is disabled"
---------------------------------------------------------------------------------------------------------------
Any way I can reinstall stock from fastboot? damn it......
Click to expand...
Click to collapse
No idea how when and after what exactly but the installation of stock rom started by itself after couple of reboots and couple of command i tried. (I had a file : US_epad-user-10.6.1.14.10.zip on my SD card
sbdags said:
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
Click to expand...
Click to collapse
Probably a Bad Idea - you should unmount /data before formatting. Then it should also not hurt to keep the recovery running.
Unbrick my TF 700t
Accidentally, bricking my tablet
I try Advance and Terminal Command with TRWP at tablet, it did not work
but when I try with command from PC (desktop), it works like a charm. I was able to see internal storage
from that just re install Custom ROM. Thank alot to sdbag
Thanks
sbdags said:
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
Click to expand...
Click to collapse
Wow. you are a life saver. that worked for me.
player50 said:
Wow. you are a life saver. that worked for me.
Click to expand...
Click to collapse
Glad it worked. Everyone should keep those commands handy
Thanks a lot...
After a long research I have found your thread.
I have almost given up looking for this damn issue...
At last, It became real! You are a real life saver.
sbdags help!
1) i dont know how to unmount data .
2) when i click advanced then terminal command it opens- Browse to starting folder and gives the file manager kind of view.
3) so i tried using adb on computer
the first three command work(i think but the third gives this error not enough space) .
please suggest a solution. thank you in advance
device moto g xt1033
i tried downgrading from lollipop 5.0 brasilian to kitkat but it wont go past warning bootloader unlocked screen. when i flash cm from twrp, it gives 3 errors
E:/ unable to mount '/data'
E:/ unable to mount '/cache'
E:/ unable to mount internal storage
then when i start it just keeps on loading on cm logo
should i create a separate thread for all this?
'
SemiNoob314 said:
1) i dont know how to unmount data .
2) when i click advanced then terminal command it opens- Browse to starting folder and gives the file manager kind of view.
3) so i tried using adb on computer
the first three command work(i think but the third gives this error not enough space) .
please suggest a solution. thank you in advance
device moto g xt1033
i tried downgrading from lollipop 5.0 brasilian to kitkat but it wont go past warning bootloader unlocked screen. when i flash cm from twrp, it gives 3 errors
E:/ unable to mount '/data'
E:/ unable to mount '/cache'
E:/ unable to mount internal storage
then when i start it just keeps on loading on cm logo
should i create a separate thread for all this?
'
Click to expand...
Click to collapse
Question: Why don't you care to read the short thread from beginning?
das chaos said:
Question: Why don't you care to read the short thread from beginning?
Click to expand...
Click to collapse
i am really sorry if the earlier comment came out as rude.
actually i did all of those steps, using the command terminal, using adb from pc but none of them worked, all of them had some problem
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Same problem
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
I'm also facing same problem.......shows 0MB in Internal storage(twrp).......and stuck with YU logo doesnt go further....
I am also facing the exact same problem. Did you find any solution ??
BOTDeveloper said:
I am also facing the exact same problem. Did you find any solution ??
Click to expand...
Click to collapse
same here. any solution?? please help guys !
Facing same problem. Did anyone solve the issue?
cm-13.0-20161219-NIGHTLY-lettuce.zip apply this update from sd card it works
Guys ,..... anybody plz any solutions..... developers!!
facing exact same problem
guys facing exact same problem. searched everywhere but couldn't find any solution. im very much frustrated right now. tried everything . nothing works
facing same problem
any update on howm top solvew thisa guys?
Solution for 0 MB storage in TWRP
Hi Brothers!
It's my first time posting here , so if i make a mistake i am sorry in advance for that.
Solution for 0 MB storage in TWRP is very easy.
You need to boot your phone into TWRP.
In 2nd step you need to go to WIPE option .
Select Data and click on FS Options e.g. trying to change its partition format, most phones use Ext4.
Do same with the Data.
And TADA!!!!
Your problem is solved
I hope it helps you guys getting answer after a long time because i saw it late. Sorry for that.
same problem
BOTDeveloper said:
I am also facing the exact same problem. Did you find any solution ??
Click to expand...
Click to collapse
Try to wipe everything
Format data using twrp
It should be solved.
Hi my YU Yuphoria 5010 started acting up since last week ,when i noticed that the phone was restarting randomly and the settings was missing and even if i clicked on the settings logo in the notification panel, nothing would happen .So i decided to flash a Cusstom ROM instead and boot into recovery.While trying to wipe cache,dalvik and data I got an error message "uable to mount data,cache ,system(invalid argument) and internal memory* was showing up as 0.So i thought my phone was bricked and tried reviving it with the sd card method.But everything else except for system flashed , and got an error FAILED (remote: flash write failure ) just for system .Anyway now I could boot into recovery using fastboot boot command and the internal memory started showing up correcty. The fastboot command is the only way i could get into recovery, if i try power+volume down it would just come up with the empty battery logo. After this i installed qualcomm drivers and manually changed the driver to Qualcomm HS-USB QD Loader 9008 and tried flashing through QFil with a flashable stock ROM and ended up with the error message:"Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol** at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)** at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail".
But after going through some of the posts I found that my phone might not be bricked in the first place.My device just shows up as 'Android' under Other devices in Device Manager.
The following are the details from device manager.
Device type: Other devices
Manufacturer: Unknown
Location Port_#002.Hub_#003
Problem code : 0000001C
Physical Device Object name: \Device\USBPDO-6
Hardware IDS: USB\VID_2A96&PID_300A&REV_0100
USB\VID_2A96&PID_300A
{259abffc-50a7-47ce-af08-68c9a7d73366}[13]: 6.0
{6a3433f4-5626-40e8-a9b9-dbd9ecd2884b}[4]: <true>
{6a3433f4-5626-40e8-a9b9-dbd9ecd2884b}[6]: <true>
I also tried to restore through TWRP recovery using the back up my brother created on his YU 5010A to no success.Changing the file system type and back to ext4 also didnt help. I use a Windows 10 64bit Laptop.
What could I possibly do to revive my phone?Kindly help.
Sent from my HUAWEI Y560-L01 using XDA Free mobile app
Not working for me
rahman.khan001 said:
Hi Brothers!
It's my first time posting here , so if i make a mistake i am sorry in advance for that.
Solution for 0 MB storage in TWRP is very easy.
You need to boot your phone into TWRP.
In 2nd step you need to go to WIPE option .
Select Data and click on FS Options e.g. trying to change its partition format, most phones use Ext4.
Do same with the Data.
And TADA!!!!
Your problem is solved
I hope it helps you guys getting answer after a long time because i saw it late. Sorry for that.
Click to expand...
Click to collapse
Not getting any help as the same failed to mount issue is continuing.
puriadeb said:
Not getting any help as the same failed to mount issue is continuing.
Click to expand...
Click to collapse
Wipe everything include system,internal storage and data.
Reboot TWRP to recovery again
Now check your internal storage will be mounted
After it connect phone with pc in mtp mode ( TWRP)
Copy any custom ROM
Then install it through recovery
Enjoy
nischait said:
Wipe everything include system,internal storage and data.
Reboot TWRP to recovery again
Now check your internal storage will be mounted
After it connect phone with pc in mtp mode ( TWRP)
Copy any custom ROM
Then install it through recovery
Enjoy
Click to expand...
Click to collapse
Hi,
I have tried this several times without any help.
Cache format issue .Solved using advanced wipe in TWRP
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
open TWRP recovery.Go to wipe section and select advanced wipe option here .Now select data and cache from check boxes.then click on change partition format.Select ext4fs .Wipe it then wait for sometime because sometimes it takes approximately 15-20 mins so be patient .It will successfully wipe and then you can see that everything is up to the mark !
puriadeb said:
Hi,
I have tried this several times without any help.
Click to expand...
Click to collapse
flash stock cyanogen rom again. Then install TWRP. Cross check at your end. We actually don't know which process you are following!
I have a YU5510A running Quarkos and YU5010A running AOSP Extended. I also flash a lot of custom Roms but never get any issue.
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
duskyrahul said:
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
Click to expand...
Click to collapse
Flash stock ROM using fastboot
For yu5010a you got fastboot package
Open flash all.bat
Just remove device code
02x1ebf or anything I don't remember what it was.
Remove it from all lines
Save flash all.bat
Run it
---------- Post added at 01:29 PM ---------- Previous post was at 01:26 PM ----------
duskyrahul said:
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
Click to expand...
Click to collapse
Flash stock ROM using fastboot
For yu5010a you got fastboot package
Open flash all.bat
Just remove device code
02x1ebf or anything I don't remember what it was.
Remove it from all lines
Save flash all.bat
Run it
For 5510a
Download ygdp 5.0
Select developer option
Select CBP file
Wait for tool extract it
Now minimize tool
Go to folder
Ygdp 5.0
You find here downfiles folder
Copy it and paste in c:\
Run flash all.bat
Done
---------- Post added at 01:35 PM ---------- Previous post was at 01:29 PM ----------
If any one got error in mounting using twrp
Just follow steps
Goto wipe -> advance wipe-> format data->
Type yes
Wait for process completion
Now reboot twrp to recovery
You see everything is mounted successfully.
Note :- with this step you format everything from your phone so don't reboot to system
Now connect phone with pc and copy any downloaded custom ROM in external SD
Flash it
Enjoy
im sharing a solution for the problem in the title
i have faced this problem once and this solution worked
go to section "wipe" then "advanced wipe"
choose the partition with the problem*
and choose "repair or change file system"
then "change file system"
you will find many formats
first choose any one for example "f2fs" wipe
wait untill it finishes then repeat from the begining and choose "ext4"
wait untill it finishes now the "data" partition is fixed**
repeat this method with other partitions if not working
M.sapry said:
im sharing a solution for the problem in the title
i have faced this problem once and this solution worked
go to section "wipe" then "advanced wipe"
choose the partition with the problem*
and choose "repair or change file system"
then "change file system"
you will find many formats
first choose any one for example "f2fs" wipe
wait untill it finishes then repeat from the begining and choose "ext4"
wait untill it finishes now the "data" partition is fixed**
repeat this method with other partitions if not working
Click to expand...
Click to collapse
Yes this is the procedure to unencrypt an encrypted data partition. Sometimes you can also just choose to Format Data and get the same result
Sent from my Nexus 6P using Tapatalk
@clsA
i know but the problem is that you get this error even when you try to normally wipe data partition
so its a way to get through the problem
I tried everything such as Changing file system Ext2 to Etx4, formating data partition, flashing TWRP again but literally nothing worked! Device Xiaomi Redmi 6 ( Cereus). After I format data my internal storage ( 0 Mb problem ) got fixed but when I booted the device and set up the device and then I boot to TWRP and again the problem shows up 0 MB Problem and then I researched well and I get to know there is a file name Force-Encryption-Disabler or DM-Verity file then I formatted data partition and flashed DM-Verity File and it showed successfully flashed but but but here comes a twist when I set up my device again and I boot into TWRP Recovery it again again again shows 0 MB Internal storage !!! Please help me!!! If you know anything then please lemme know, it will be so grateful !!!
STJ ANONYMOUS ! said:
I tried everything such as Changing file system Ext2 to Etx4, formating data partition, flashing TWRP again but literally nothing worked! Device Xiaomi Redmi 6 ( Cereus). After I format data my internal storage ( 0 Mb problem ) got fixed but when I booted the device and set up the device and then I boot to TWRP and again the problem shows up 0 MB Problem and then I researched well and I get to know there is a file name Force-Encryption-Disabler or DM-Verity file then I formatted data partition and flashed DM-Verity File and it showed successfully flashed but but but here comes a twist when I set up my device again and I boot into TWRP Recovery it again again again shows 0 MB Internal storage !!! Please help me!!! If you know anything then please lemme know, it will be so grateful !!!
Click to expand...
Click to collapse
well i had been looking for this maybe for 2 days and suddenly had an idea which is the best idea in my mind until now and it worket with me, i am being so happy now and i am gonna share it with you
it is simply about updating the recovery
just do what i say:
1 Go to twrp.me
2 type your phone name
3 sesrch
4 click your phone type { exoiiinysss... bla bla bla for example}
5 find the last RAR file {2022 version} and click download
6 Open Odin 3
7 set your phone in download mode
8 click AP in your odin3 on your pc
9 choose the file
click start
thats all
Note : This will wipe/format your Data partion and your data will be reset.
INSTRUCTIONS :
1) Reboot your device into TWRP Recovery.
2) Go to Wipe menu.
3) Go to Advance Wipe.
4) Select Data and go to Repair or Change File System.
5) Click Repair File System. (If not fix, go to step number 6)
6) Go to Change File System.
7) Select Ext2 and swipe to confirm.
8) Now change back to Ext4 and swipe to confirm.
9) Now go back and check if your partions can be mount or not from Mount menu.
10) If not fix, repair your Internal partition. (This may wipe your Internal storage).
OR Unlock your bootloader again.
thanks, works for me J701F 8.1
Thanks, worked for me too.
help
Vlk Is My Name said:
Note : This will wipe/format your Data partion and your data will be reset.
INSTRUCTIONS :
1) Reboot your device into TWRP Recovery.
2) Go to Wipe menu.
3) Go to Advance Wipe.
4) Select Data and go to Repair or Change File System.
5) Click Repair File System. (If not fix, go to step number 6)
6) Go to Change File System.
7) Select Ext2 and swipe to confirm.
8) Now change back to Ext4 and swipe to confirm.
9) Now go back and check if your partions can be mount or not from Mount menu.
10) If not fix, repair your Internal partition. (This may wipe your Internal storage).
Click to expand...
Click to collapse
help me guys,, it not fix for me until step 9. so how to run step 10, I dont know to do it..
thanx
Hi! I did this to my Axon 7 now my phone stuck at "Your device software can't be checked for corruption......" screen. The phone cannot be turned off and pressing power button also not making anything to the device. I afraid that my phone is bricked. Before booting, after I did changing the system file type, TWRP said that no OS installed and it is very weird. Maybe somebody can give me any advice.
Is there a fix that doesn't involve erasing your data?
abdinsyakirin said:
Hi! I did this to my Axon 7 now my phone stuck at "Your device software can't be checked for corruption......" screen. The phone cannot be turned off and pressing power button also not making anything to the device. I afraid that my phone is bricked. Before booting, after I did changing the system file type, TWRP said that no OS installed and it is very weird. Maybe somebody can give me any advice.
Click to expand...
Click to collapse
You wiped the system.
You can reinstall it or restore a backup if you have one
kulitkayu said:
help me guys,, it not fix for me until step 9. so how to run step 10, I dont know to do it..
thanx
Click to expand...
Click to collapse
Try changing file system to ext2, then reboot the recovery, then do the change back to ext4. That's how it worked for me.
Thank u very much !!!!!!?
I love you man! ...i wanna kiss you really ..!
I felt like crying when my lenovo p1m started bootlooping: like hell! Well now i am satisfied really.!
i have the same issue. i tried changing the file format but it just shows failed. i tried formating data method too. it just shows failed. i tried going into recovery and it just reboots into twrp again. i try flashing anything andf it opens into twrp again. all in all there is nothing i can do but use twrp and see eerything fail. also i installed twrp with odin if that helps. pls help guys
L e g e n d
Vlk Is My Name said:
Note : This will wipe/format your Data partion and your data will be reset.
INSTRUCTIONS :
1) Reboot your device into TWRP Recovery.
2) Go to Wipe menu.
3) Go to Advance Wipe.
4) Select Data and go to Repair or Change File System.
5) Click Repair File System. (If not fix, go to step number 6)
6) Go to Change File System.
7) Select Ext2 and swipe to confirm.
8) Now change back to Ext4 and swipe to confirm.
9) Now go back and check if your partions can be mount or not from Mount menu.
10) If not fix, repair your Internal partition. (This may wipe your Internal storage).
OR Unlock your bootloader again.
Click to expand...
Click to collapse
It worked for me made /data readable but when I rebooted the system (stock) all I got is the xperia screen going on a loop, nothing else. I had to re-installed the system and set-up everything again (system, twrp, magisk) but when I flash twrp and go to recovery I get that /data error again, wiping your internal storage doesn't help I get the same problem. When I install system (stock) I get this message "encrypting..." pop up when it boots the system, new clean install.
Vlk Is My Name said:
Note : This will wipe/format your Data partion and your data will be reset.
INSTRUCTIONS :
1) Reboot your device into TWRP Recovery.
2) Go to Wipe menu.
3) Go to Advance Wipe.
4) Select Data and go to Repair or Change File System.
5) Click Repair File System. (If not fix, go to step number 6)
6) Go to Change File System.
7) Select Ext2 and swipe to confirm.
8) Now change back to Ext4 and swipe to confirm.
9) Now go back and check if your partions can be mount or not from Mount menu.
10) If not fix, repair your Internal partition. (This may wipe your Internal storage).
OR Unlock your bootloader again.
Click to expand...
Click to collapse
help me guys,, it not fix for me until step 6. so how to run step 7, I dont know to do it..
samsung note 8 anroid 9
Thanks! this works for me!
Worked for midi pixel experience
Thank a ton my phone is finally booting now
Can I do this steps via adb interface? My touch screen is not working...
Vlk Is My Name said:
Note : This will wipe/format your Data partion and your data will be reset.
INSTRUCTIONS :
1) Reboot your device into TWRP Recovery.
2) Go to Wipe menu.
3) Go to Advance Wipe.
4) Select Data and go to Repair or Change File System.
5) Click Repair File System. (If not fix, go to step number 6)
6) Go to Change File System.
7) Select Ext2 and swipe to confirm.
8) Now change back to Ext4 and swipe to confirm.
9) Now go back and check if your partions can be mount or not from Mount menu.
10) If not fix, repair your Internal partition. (This may wipe your Internal storage).
OR Unlock your bootloader again.
Click to expand...
Click to collapse
Great work! Yea this worked on the Pixel 3. Changed from ext4 and then back to f2fs and after that data was able to mount!
Greatly amazing! Everybody should read it.
Full Thanks.
This DID NOT workerd for me. Formatting data (or change to ext2 and ext4) only gives you TEMPORAL data access. After booting in the System then the data partition gets, again, inaccesible.
elreymon said:
This DID NOT workerd for me. Formatting data (or change to ext2 and ext4) only gives you TEMPORAL data access. After booting in the System then the data partition gets, again, inaccesible.
Click to expand...
Click to collapse
So what exactly are you aiming to do. I know if you just flash stock and boot the device, then reboot to fastboot then boot to twrp it should work fine. But if your trying to go straight after ./flash-all.sh then fastboot boot twrp then it wont work because the partition isn't formated yet
I was formatting the phone and after pressing " Format data / factory reset ", I though that this option only formats the data and not the actual rom, so i also chose the "format system option", BUT THAT (might have) REMOVED ALL PARTITIONS. now every time i try to flash a zip, it just says 'failed to read command: no error' or 'Timed out waiting for fuse to be ready'.
is there a way to create new partitions from twrp's terminal?
Please help
nuud said:
I was formatting the phone and after pressing " Format data / factory reset ", I though that this option only formats the data and not the actual rom, so i also chose the "format system option", BUT THAT (might have) REMOVED ALL PARTITIONS. now every time i try to flash a zip, it just says 'failed to read command: no error' or 'Timed out waiting for fuse to be ready'.
is there a way to create new partitions from twrp's terminal?
Please help
Click to expand...
Click to collapse
Use this tool to start from scratch:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
nuud said:
I was formatting the phone and after pressing " Format data / factory reset ", I though that this option only formats the data and not the actual rom, so i also chose the "format system option", BUT THAT (might have) REMOVED ALL PARTITIONS. now every time i try to flash a zip, it just says 'failed to read command: no error' or 'Timed out waiting for fuse to be ready'.
is there a way to create new partitions from twrp's terminal?
Please help
Click to expand...
Click to collapse
Try to use Orange fox, thn flash a zip file, https://orangefox.download/en/device/vayu