Database Info

[Resolved] Phone bricked and /system format

Hello,
At first, i'm french, my english is maybe bad.
I was installed a CM9 Rom on my HTC One S. Run correctly, but no mobil data and network.
A friend advised to me format /system, newbie on Android, i accepted. But now Phone at bricked, i can't acces to Android.
My sdcard is not recognized by my computer, even if mount sdcard in recovery. I have flash CWM 5.8.2.4 and TWRP 2.1.7, but no results.
I'm in impasse ! Thanks you read me.
Good bye !

You are not bricked. As long as you can get into fastboot, you're good.
If you can not see your sdcard in recovery, there is a sticky in Q&A on how to fix unmountable sdcard.
If you can see your sdcard in recovery, there is a post in Android Dev on how to adb push a rom to your phone.
I dont mean see from your computer, but mount and see it in recovery when you choose a zip etc.. or in an adb shell.
-Jobo

Thanks for you answer,
I already test this solutions, but when i push a ROM with ADB, i have a message error "device not found", because a i can't boot on OS, just fastboot.
When i test fix unmount SDcard, i'm block when i do "factory reset", becaus in .log i see "E:Unable to mount /system" and "E:Unable to open ums lunfile: (No such file or directory)"

Can't you get adb when you boot into recovery?
Not being able to mount /system is worrisome. You could try formatting it.
The ums lun file is only to mount your sdcard on your computer. You don't necessarily need it.

Oh yes i can with TWRP, but i have this :
View attachment 1255479
c:\android-sdk\tools>adb push /sdcard cm-9-20120731
cannot stat '/sdcard': No such file or directory
And in my computer, i can see "Disque Amovible H:", but i can't open this.

You have the operands to 'adb push' reversed.
It's:
adb push local_file remote_file_or_dir
But first you have to make sure you can mount /system and /sdcard in recovery.

Thanks !! I have successful with ADB command ! Thanks really !
It's resolved, thank you very much !
Good bye !

[Q] Help i may have doomed my tablet.

So here's my situation.
I was trying to move a file from my internal storage to my microsd using the twrp file manager, it was successful but file remained in the internal storage at the sametime the file was in my microsd. So i thought it might be a glitch so I rebooted and entered to twrp again, but suddenly the splash screen flashed and froze. So i rebooted it again and tried again, the samething happened. It just flashed and then frozed at the twrp splash screen. I tried to drain my tablet and then turned it on and tried to go to the twrp, but the samething happened. I tried booting to android but it wont boot, i'm using grimlock 4.0 and I'm on data2sd. It's stuck at the pre.init screen. I can use fastboot, i tried to reflash twrp with the lastest one, i erased the previous one and flashed the latest one using fastboot, it worked but it cannot mount any partitions except my microsd card and whenever you reboot it and go back to recovery the twrp screen flashes and freezes. I need help i think i may have doomed my tablet.
P.s i erased the boot, system, partitions in hopes that i can reset everything but apparently it doesn't work.

supernova0 said:
So here's my situation.
I was trying to move a file from my internal storage to my microsd using the twrp file manager, it was successful but file remained in the internal storage at the sametime the file was in my microsd. So i thought it might be a glitch so I rebooted and entered to twrp again, but suddenly the splash screen flashed and froze. So i rebooted it again and tried again, the samething happened. It just flashed and then frozed at the twrp splash screen. I tried to drain my tablet and then turned it on and tried to go to the twrp, but the samething happened. I tried booting to android but it wont boot, i'm using grimlock 4.0 and I'm on data2sd. It's stuck at the pre.init screen. I can use fastboot, i tried to reflash twrp with the lastest one, i erased the previous one and flashed the latest one using fastboot, it worked but it cannot mount any partitions except my microsd card and whenever you reboot it and go back to recovery the twrp screen flashes and freezes. I need help i think i may have doomed my tablet.
P.s i erased the boot, system, partitions in hopes that i can reset everything but apparently it doesn't work.
Click to expand...
Click to collapse
As long as you can fastboot, you have not 'doomed' your tablet.
Flash newest stock ROM from ASUS site and you will be set:
1. Unzip stock ROM zip file twice and you will get a file 'blob'
2. Put blob file into fastboot folder.
3. Fastboot ROM using:
Code:
fastboot -i 0x0b05 flash staging blob [enter]
fastboot -i 0x0b05 reboot [enter]
4. Let blue progressbar finish (will need a long, long time) and tab will reboot itself.
5. Now you should be on working stock ROM and can flash custom TWRP (2.8.x.x).
Good luck!

das chaos said:
As long as you can fastboot, you have not 'doomed' your tablet.
Flash newest stock ROM from ASUS site and you will be set:
1. Unzip stock ROM zip file twice and you will get a file 'blob'
2. Put blob file into fastboot folder.
3. Fastboot ROM using:
Code:
fastboot -i 0x0b05 flash staging blob [enter]
fastboot -i 0x0b05 reboot [enter]
4. Let blue progressbar finish (will need a long, long time) and tab will reboot itself.
5. Now you should be on working stock ROM and can flash custom TWRP (2.8.x.x).
Good luck!
Click to expand...
Click to collapse
I was able to that, but the filesystem that I was using was f2fs so when I booted to the stockrom it said" encryption unsuccessful" so i had to format my data partition to a compatible format. so i flash twrp recovery, but I had the same problem, the screen flashes and then it stays at the twrp splash screen. then I thought it might be a problem with my data partition, so I erased my whole data partition using fastboot, with the command
fastboot format userdata
it worked and the recovery is working also, but my filesystem is on ext3 and I know ext 4 is better than ext 3, so using the twrp recovery I formatted my data partition to ext4 but suddenly the recovery hangs and doesn't finish the format. it there a way that this could be fixed? I really want to use a better file system.

supernova0 said:
..... I formatted my data partition to ext4 but suddenly the recovery hangs and doesn't finish the format. it there a way that this could be fixed? I really want to use a better file system.
Click to expand...
Click to collapse
Probably it didn't hang but you didn't have the patience! Formatting a /data partition to ext4 can last a long, long time. People reportet as much as 90 min. In my case it was 30 min. So, be patient!

das chaos said:
Probably it didn't hang but you didn't have the patience! Formatting a /data partition to ext4 can last a long, long time. People reportet as much as 90 min. In my case it was 30 min. So, be patient!
Click to expand...
Click to collapse
Thanks it worked!!! thank you very much
The file system is now on ext4 but whenever I try to flash it to f2fs it gives me:
Unknown mtp message type 1
And then its unable to format to f2fs.

supernova0 said:
Thanks it worked!!! thank you very much
The file system is now on ext4 but whenever I try to flash it to f2fs it gives me:
Unknown mtp message type 1
And then its unable to format to f2fs.
Click to expand...
Click to collapse
1. You reasonably can only format /data with f2fs
2. Reliable formatting f2fs is possible with newest TWRP 2.8.5.0; Goto tab 'Wipe'=> check only /data=>Change File System=>check f2fs
3. Depending on what ROM you are actually, there might be a command 'mkfs.f2fs' in /system/bin; you can format manually by opening Terminal Emulator typing:
Code:
su [enter]
mkfs.f2fs /dev/block/mmcblk0p8 [enter]
be carefully, what you type! Mistyping can render your tab bricked.

das chaos said:
1. You reasonably can only format /data with f2fs
2. Reliable formatting f2fs is possible with newest TWRP 2.8.5.0; Goto tab 'Wipe'=> check only /data=>Change File System=>check f2fs
3. Depending on what ROM you are actually, there might be a command 'mkfs.f2fs' in /system/bin; you can format manually by opening Terminal Emulator typing:
Code:
su [enter]
mkfs.f2fs /dev/block/mmcblk0p8 [enter]
be carefully, what you type! Mistyping can render your tab bricked.
Click to expand...
Click to collapse
Ok, I found myself here as well. I recovered and have KatKiss 5.0.2 #18 installed and running. I do have TWRP 2.8.5 and it will not convert my /data to f2fs with the same error above. It worked once but then I got hungup on a Google restore and it corrupted everything forcing me to Asus restore. This ROM doesn't have mkfs.f2fs.
How else can I convert to f2fs? Is there another way to do this via ADB or getting the mkfs.f2fs command to drop in /system/bin/?
Thanks--

bretzke said:
Ok, I found myself here as well. I recovered and have KatKiss 5.0.2 #18 installed and running. I do have TWRP 2.8.5 and it will not convert my /data to f2fs with the same error above. It worked once but then I got hungup on a Google restore and it corrupted everything forcing me to Asus restore. This ROM doesn't have mkfs.f2fs.
How else can I convert to f2fs? Is there another way to do this via ADB or getting the mkfs.f2fs command to drop in /system/bin/?
Thanks--
Click to expand...
Click to collapse
Try that mkfs.f2fs command from recovery in a shell from a PC
Or after it fails pull a recovery log .....
Code:
adb pull /tmp/recovery.log
paste it on pastebin or upload it to xda .....
Thx Josh

lj50036 said:
Try that mkfs.f2fs command from recovery in a shell from a PC
Or after it fails pull a recovery log .....
Code:
adb pull /tmp/recovery.log
paste it on pastebin or upload it to xda .....
Thx Josh
Click to expand...
Click to collapse
Thanks for helping...here's the log: http://pastebin.com/Fr5q88PH
Here is the error:
Formatting Data using mkfs.f2fs...
mkfs.f2fs: invalid option -- r
I:mkfs.f2fs -t 1 -r 16384 /dev/block/mmcblk0p8 process ended with ERROR=1

bretzke said:
Thanks for helping...here's the log: http://pastebin.com/Fr5q88PH
Here is the error:
Formatting Data using mkfs.f2fs...
mkfs.f2fs: invalid option -- r
I:mkfs.f2fs -t 1 -r 16384 /dev/block/mmcblk0p8 process ended with ERROR=1
Click to expand...
Click to collapse
Thanks for your assistance Josh. It turns out 2.8.5 has a bug for f2fs conversion on many/most devices. Loaded 2.8.4 and it worked perfectly.

bretzke said:
Thanks for your assistance Josh. It turns out 2.8.5 has a bug for f2fs conversion on many/most devices. Loaded 2.8.4 and it worked perfectly.
Click to expand...
Click to collapse
See you found your own answer and I like that ..... :good:
Thx Josh

[SOLVED] Decryption Unsuccessful and a currently bricked M8

I previously ran LolliGPE but was long overdue for an update. I downloaded the latest version and copied the image to my phone and flashed the ROM. I decided to go try a dirty install first to see if I could keep everything I had, since I had already been running a previous version and after reviewing the changelog did not see anything recommending to wipe clean. After installing successfully, Android asked me to enter my password to decrypt my data (I don't recall ever encrypting my data?), and so I did. It then told me that my password was right, but the data was corrupt, and presented me a button to reset my phone. The button redirected me to recovery and automatically attempted to wipe /data and then re-mount it, but the wipe failed. I rebooted again with the same issue, same failed attempt to wipe. I went to install the zip again, and this time do a full wipe, but it was unable to mount my phone's storage nor my SD card. I am not able to mount either at all now.
What's the best course of action? I'd like to retain as much as I can and avoid wiping all of the internal storage clean. Is there a simpler fix to this or am I doomed?
HBOOT: 3.19.0.0000
RADIO: 1.09.20.0926
OS: 3.28.605.4
EDIT: For anyone else having a problem like this that at least wants to get their data back, here's what you should do (I assume you know how to work with Linux!):
Make sure you have the latest version of TWRP and ADB.
Boot the phone into recovery mode and connect the phone to your computer via USB
Run "ls -al /dev/block/platform/msm_sdcc.1/by-name" and check the output. Make a note of the partition marked "userdata" - for me, it was /dev/block/mmcblk0p48.
Either: simply use adb pull to copy this file to your computer (this will require about 26 gigs of space), or attempt to mount the file. To use adb pull, execute "adb pull /dev/block/<ID> ./data" (ID being what you marked down). Your data partition will be copied to /data. To mount, use "mount -t ext4 /dev/block/<ID> /userdata". Whatever's left of your data will be on your phone's new /userdata folder.
Use ADB to pull what files you want from /userdata. If you pulled the partition, skip this step.
If you copied the files you wanted over, you're done. If you pulled the entire partition, you're going to want to try and mount it. On Windows, there are various tools to mount Linux partitions, a quick Google will find some good ones. However, if the data is corrupt, it will not work. I recommend attempting to repair the partition on linux, with the command "e2fsck -f -y /path/to/data", replacing the path to your data file as necessary. Once done, run "mount -t ext4 /path/to/data /mnt/data", replacing the paths as necessary.
Once mounted, you can access your data wherever it was mounted. If e2fsck appeared to fix many errors, chances are most of your data will be in the lost+found folder, and you'll need to sort through this yourself. If you're lucky, then your data will be intact and readily usable. Internal SD card data is located at ./media/0.
To fix the partitions and get Android back up and running, you need to install the latest firmware, format your data in TWRP, factory reset, and then flash a ROM again. Here's what I did to do that, without an SD card. If you have an SD card, simply copy your ROM zip to the SD card and skip the final steps:
Make sure you have the latest version of TWRP and ADB, and download the latest copy of the firmware (check the development forum here).
Boot the phone (doesn't matter to what) and run adb reboot bootloader. When your phone reboots, double-check by running fastboot reboot-bootloader.
Put your phone in RUU mode with fastboot oem rebootRUU. The phone will restart and the HTC logo will come up.
Wait a couple seconds, then run fastboot flash zip firmware.zip, where firmware.zip is the firmware you want to flash.
The first time you do this, it will fail saying something like "FAILED (remote: 90 hboot pre-update! please flush image again immediately)". Ignore this, run the last command again: fastboot flash zip firmware.zip
The progress bar will appear and begin filling. Wait until fastboot is finished flashig it (the progress bar may not fill completely), wait an extra 5 seconds or so, and then do fastboot reboot.
The phone will reboot. Android will still be messed up, but you can verify the partitions are in working order by checking adb shell cat /proc/emmc.
Once you know the partitions are working, get back into TWRP/recovery: adb reboot recovery
Format /data and wipe /cache, /data, dalvik/art cache, etc (factory reset). You will lose the contents of your internal storage and everything else.
If you don't have the ROM zip on an sd card, make sure the zip is in the same directory as adb and run adb push rom.zip /sdcard/rom.zip, where rom.zip is the ROM. You can also copy it to the external sd by swapping /sdcard/rom.zip with /external_storage/rom.zip.
Once copied, reboot into recovery and flash the zip. Back to normal!

Update:
It's a firmware problem. Apparently there was a new firmware update that the ROM uses that I don't have. mmcblk0p42 was changed to "vzw_logger" (which I don't have), making mmcblk0p49 userdata instead of previously mmcblk0p48. The data partition it expects to be /data is /cache. Got this information by comparing 'cat /proc/emmc' with information of the latest version I found here.
Is there a way to fix this that allows me to preserve the contents of my internal storage (/sdcard)? Can I just flash an older version of the ROM to backup my data?

Klayderpus said:
Update:
It's a firmware problem. Apparently there was a new firmware update that the ROM uses that I don't have. mmcblk0p42 was changed to "vzw_logger" (which I don't have), making mmcblk0p49 userdata instead of previously mmcblk0p48. The data partition it expects to be /data is /cache. Got this information by comparing 'cat /proc/emmc' with information of the latest version I found here.
Is there a way to fix this that allows me to preserve the contents of my internal storage (/sdcard)? Can I just flash an older version of the ROM to backup my data?
Click to expand...
Click to collapse
I posted a warning about this change in the general section early on. For you to have the partition changes means you are on the newer firmware which doesn't match what you posted above for os. You very likely at this point have nothing left to salvage. Are you on the latest twrp?

dottat said:
I posted a warning about this change in the general section early on. For you to have the partition changes means you are on the newer firmware which doesn't match what you posted above for os. You very likely at this point have nothing left to salvage. Are you on the latest twrp?
Click to expand...
Click to collapse
I am on the latest TWRP, yes. Since this post, I've actually been making good progress in getting the data partition back, or so I think. I've been using dd to copy /dev/block/mntblk0p48 to an image file, but got stuck when I reached the FAT32 limit, so I re-formatted my SD card, except now it's read-only.

Klayderpus said:
I am on the latest TWRP, yes. Since this post, I've actually been making good progress in getting the data partition back, or so I think. I've been using dd to copy /dev/block/mntblk0p48 to an image file, but got stuck when I reached the FAT32 limit, so I re-formatted my SD card, except now it's read-only.
Click to expand...
Click to collapse
If you Dd the entire data partition it's gonna be almost 25 gigs. If you can't mount data in twrp and find anything usable when browsing via adb in twrp there's probably not anything usable in there.

dottat said:
If you Dd the entire data partition it's gonna be almost 25 gigs. If you can't mount data in twrp and find anything usable when browsing via adb in twrp there's probably not anything usable in there.
Click to expand...
Click to collapse
I did a DD before while in ADB and it only got to about 1.3 gigs, but after running the image through e2fsck I actually found some images and downloads. I think there's usable stuff in there and I'd like to at least try to get it. There's family pictures and stuff on there that have some value to me. My SD card is 32 gigs so I could probably do it if anything for the hell of it.
Do you happen to know how I can get the SD card mounted? mount -o rw,remount /dev/block/mmcblk1p1 [some dir] is what I've been trying, but I've been getting either Read only filesystem or Invalid argument.
I might be a little crazy

Klayderpus said:
I did a DD before while in ADB and it only got to about 1.3 gigs, but after running the image through e2fsck I actually found some images and downloads. I think there's usable stuff in there and I'd like to at least try to get it. There's family pictures and stuff on there that have some value to me. My SD card is 32 gigs so I could probably do it if anything for the hell of it.
Do you happen to know how I can get the SD card mounted? mount -o rw,remount /dev/block/mmcblk1p1 [some dir] is what I've been trying, but I've been getting either Read only filesystem or Invalid argument.
I might be a little crazy
Click to expand...
Click to collapse
Its already mounted.. Just boot into TWRP while connected to your PC. Open cmd prompt in your adb directory.
adb shell
cd sdcard
ls
See if your internal SD card contents are listed.

dottat said:
Its already mounted.. Just boot into TWRP while connected to your PC. Open cmd prompt in your adb directory.
adb shell
cd sdcard
ls
See if your internal SD card contents are listed.
Click to expand...
Click to collapse
TWRP lists the internal SD card as being size 0 under Mount -> Select Storage and /sdcard is empty. I re-formatted my external SD card to make a full size image but that's what wasn't mounting.

Klayderpus said:
TWRP lists the internal SD card as being size 0 under Mount -> Select Storage and /sdcard is empty. I re-formatted my external SD card to make a full size image but that's what wasn't mounting.
Click to expand...
Click to collapse
Did you try the repair option for /data listed under wipe in TWRP?

dottat said:
Did you try the repair option for /data listed under wipe in TWRP?
Click to expand...
Click to collapse
Doesn't work. There's a couple of messages about not being able to mount /data and then:
Code:
Repairing Data using e2fsck...
E:Unable to repair '/data'.
E:Error repairing file system.

Klayderpus said:
Doesn't work. There's a couple of messages about not being able to mount /data and then:
Code:
Repairing Data using e2fsck...
E:Unable to repair '/data'.
E:Error repairing file system.
Click to expand...
Click to collapse
try this
adb shell
mount -t ext4 /dev/block/mmcblk0p49 /userdata
df
show me the output of df...
and if to be sure of which firmware you are on.. reboot recovery... and do the following....
adb shell
mount -t ext4 /dev/block/mmcblk0p48 /userdata
df
and show me that DF

I got all of my data back successfully. I'm updating the OP with the steps I did to get it back.
What's the next step? Change firmware? I have a local copy of what I needed from the phone, so anything's game now.
edit: /dev/block/mmcblk0p48 for me is userdata, 49 does not exist. Both mounts fail.
Code:
df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 933044 24 933020 0% /dev
tmpfs 933044 20 933024 0% /tmp
/dev/block/mmcblk0p47 1030828 16464 1014364 2% /cache
/dev/block/mmcblk1p1 30647232 12 29090436 0% /external_sd
/dev/block/mmcblk1p1 30647232 12 29090436 0% /and-sec

Klayderpus said:
I got all of my data back successfully. I'm updating the OP with the steps I did to get it back.
What's the next step? Change firmware? I have a local copy of what I needed from the phone, so anything's game now.
edit: /dev/block/mmcblk0p48 for me is userdata, 49 does not exist. Both mounts fail.
Code:
df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 933044 24 933020 0% /dev
tmpfs 933044 20 933024 0% /tmp
/dev/block/mmcblk0p47 1030828 16464 1014364 2% /cache
/dev/block/mmcblk1p1 30647232 12 29090436 0% /external_sd
/dev/block/mmcblk1p1 30647232 12 29090436 0% /and-sec
Click to expand...
Click to collapse
I would say update firmware. Since you confirmed blk48 as user data I know you don't have lollipop firmware.
I posted a firmware zip that contains the newest twrp which is compatible with lollipop in tigerstowns firmware thread. You can use that to update.
Then wipe and reinstall whatever Rom you want to use.

I fixed it this morning by updating firmware and will update the OP with the rest of the steps for the Googlers. Thanks again.

Klayderpus said:
EDIT: For anyone else having a problem like this that at least wants to get their data back, here's what you should do (I assume you know how to work with Linux!):
Make sure you have the latest version of TWRP and ADB.
Boot the phone into recovery mode and connect the phone to your computer via USB
Run "ls -al /dev/block/platform/msm_sdcc.1/by-name" and check the output. Make a note of the partition marked "userdata" - for me, it was /dev/block/mmcblk0p48.
Either: simply use adb pull to copy this file to your computer (this will require about 26 gigs of space), or attempt to mount the file. To use adb pull, execute "adb pull /dev/block/<ID> ./data" (ID being what you marked down). Your data partition will be copied to /data. To mount, use "mount -t ext4 /dev/block/<ID> /userdata". Whatever's left of your data will be on your phone's new /userdata folder.
Use ADB to pull what files you want from /userdata. If you pulled the partition, skip this step.
If you copied the files you wanted over, you're done. If you pulled the entire partition, you're going to want to try and mount it. On Windows, there are various tools to mount Linux partitions, a quick Google will find some good ones. However, if the data is corrupt, it will not work. I recommend attempting to repair the partition on linux, with the command "e2fsck -f -y /path/to/data", replacing the path to your data file as necessary. Once done, run "mount -t ext4 /path/to/data /mnt/data", replacing the paths as necessary.
Once mounted, you can access your data wherever it was mounted. If e2fsck appeared to fix many errors, chances are most of your data will be in the lost+found folder, and you'll need to sort through this yourself. If you're lucky, then your data will be intact and readily usable. Internal SD card data is located at ./media/0.
[/LIST]
Click to expand...
Click to collapse
I have a laptop running Ubuntu: where do I run the "ls -al /dev/block..." command? As in what folder do I need to be in? The phone only appears in an mtp capacity...
EDIT: I figured that out but now I am stuck at "adb pull /dev/block/<ID> ./data". My ID was mmcblk0p28 but the command returns "Bash: mmcblk0p28: no such file or directory exists"
EDIT 2: Got that command to work but the file is too large to write (My disk is FAT32 ). So I then tried the mount command but again got "no such file or directory exists".

Same Issue "Decryption Unsuccessful"
I was trying to apply the OTA update for 5.1 on my M8 converted to GPE 5.01, but had to update to the stock recovery, and found myself in the same situation with the "Decryption Unsuccessful" message.
Following Klayderpus' steps to recover, but I'm running into a few issues:
1) Windows not Ubuntu so some (many) of the commands do not apply.
2) The device is not responding to adb, although it was prior to the "upgrade". Fastboot is working.
3) TWRP was not on the device, in fact I never could get to the recovery after trying to install the stock recovery when I converted to GPE 5.01 many months ago
I have a fresh nandroid backup, so I am just trying to get the device running. Being without the phone is causing me great pain....
I upgraded the firmware to 4.16 and did the factory reset from the stock 4.16 recovery. The phone boots back to the "Decryption Unsuccessful" message.
I am not sure, but I think the next step for me to try is to install the GPE ROM from graffixnyc from the microSD card (need to find/buy that little SD adaptor)
Any help would be greatly appreciated!!
========================
Update;
Recovery does not see the SD card , so I won't be able to install from there.
I'll try flashing TWRP recover to see if that will show the contents of the external card
========================
Update 2:
TWRP does see the external card, but the install failed as it is unable to mount /data and /storage.
I'm out of ideas....HELP!!
========================
Update 3
I noticed the "factory reset" in HBOOT and thought I'd try that instead of the "Wipe" in TWRP, but only made things worse.
Now the phone comes up to the "Decryption Unsuccessful" where I can then take the reset to get it into TWRP recover
TWRP comes up directly into a screen where it's "Running OpenRecovery Script" and then reboots.
I'm going to quit now, as I am only making matters worse.....
========================
Update 4
I got TWRP to quit whatever it was doing.
Now, In TWRP > Wipe > Advanced Wipe, I cannot wipe or repair the Data partition. I see a message "Could not mount /data unable to find crypto footer". Trying to wipe the Davlik Cache fails, "Unable to mount /data, " Unable to mount storage".
========================
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
version-main: 4.16.401.10
modelid: 0P6B12000
cidnum: 11111111
========================
I've bricked the phone and it looks permanent.
I found another thread where everyone was solving this issue running this command "mke2fs -T ext4 /dev/block/mmcblk0p8" in TWRP. I failed to notice that it was not an M8 device thread. The phone won't boot at all, and windows sees it as a usb drive.
Haste makes waste

Do you still have fastboot?
Check out the RUU collection here and grab what apllies to your device:
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Make sure you use the HTC fastboot.exe from post 3

highplains914drifter said:
I was trying to apply the OTA update for 5.1 on my M8 converted to GPE 5.01, but had to update to the stock recovery, and found myself in the same situation with the "Decryption Unsuccessful" message.
Following Klayderpus' steps to recover, but I'm running into a few issues:
1) Windows not Ubuntu so some (many) of the commands do not apply.
2) The device is not responding to adb, although it was prior to the "upgrade". Fastboot is working.
3) TWRP was not on the device, in fact I never could get to the recovery after trying to install the stock recovery when I converted to GPE 5.01 many months ago
I have a fresh nandroid backup, so I am just trying to get the device running. Being without the phone is causing me great pain....
I upgraded the firmware to 4.16 and did the factory reset from the stock 4.16 recovery. The phone boots back to the "Decryption Unsuccessful" message.
I am not sure, but I think the next step for me to try is to install the GPE ROM from graffixnyc from the microSD card (need to find/buy that little SD adaptor)
Any help would be greatly appreciated!!
========================
Update;
Recovery does not see the SD card , so I won't be able to install from there.
I'll try flashing TWRP recover to see if that will show the contents of the external card
========================
Update 2:
TWRP does see the external card, but the install failed as it is unable to mount /data and /storage.
I'm out of ideas....HELP!!
========================
Update 3
I noticed the "factory reset" in HBOOT and thought I'd try that instead of the "Wipe" in TWRP, but only made things worse.
Now the phone comes up to the "Decryption Unsuccessful" where I can then take the reset to get it into TWRP recover
TWRP comes up directly into a screen where it's "Running OpenRecovery Script" and then reboots.
I'm going to quit now, as I am only making matters worse.....
========================
Update 4
I got TWRP to quit whatever it was doing.
Now, In TWRP > Wipe > Advanced Wipe, I cannot wipe or repair the Data partition. I see a message "Could not mount /data unable to find crypto footer". Trying to wipe the Davlik Cache fails, "Unable to mount /data, " Unable to mount storage".
========================
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
version-main: 4.16.401.10
modelid: 0P6B12000
cidnum: 11111111
========================
I've bricked the phone and it looks permanent.
I found another thread where everyone was solving this issue running this command "mke2fs -T ext4 /dev/block/mmcblk0p8" in TWRP. I failed to notice that it was not an M8 device thread. The phone won't boot at all, and windows sees it as a usb drive.
Haste makes waste
Click to expand...
Click to collapse
If you have fastboot do the following commands
Fastboot oem task 28
Fastboot oem task 29
Then try to flash your rom or ruu.

dottat said:
If you have fastboot do the following commands
Fastboot oem task 28
Fastboot oem task 29
Then try to flash your rom or ruu.
Click to expand...
Click to collapse
No Fastboot, nothing. Device was charged, but now acts as if the battery is dead. the Power button does nothing even after a long press.
Bad day...

Klayderpus said:
I previously ran LolliGPE but was long overdue for an update. I downloaded the latest version and copied the image to my phone and flashed the ROM. I decided to go try a dirty install first to see if I could keep everything I had, since I had already been running a previous version and after reviewing the changelog did not see anything recommending to wipe clean. After installing successfully, Android asked me to enter my password to decrypt my data (I don't recall ever encrypting my data?), and so I did. It then told me that my password was right, but the data was corrupt, and presented me a button to reset my phone. The button redirected me to recovery and automatically attempted to wipe /data and then re-mount it, but the wipe failed. I rebooted again with the same issue, same failed attempt to wipe. I went to install the zip again, and this time do a full wipe, but it was unable to mount my phone's storage nor my SD card. I am not able to mount either at all now.
What's the best course of action? I'd like to retain as much as I can and avoid wiping all of the internal storage clean. Is there a simpler fix to this or am I doomed?
HBOOT: 3.19.0.0000
RADIO: 1.09.20.0926
OS: 3.28.605.4
EDIT: For anyone else having a problem like this that at least wants to get their data back, here's what you should do (I assume you know how to work with Linux!):
Make sure you have the latest version of TWRP and ADB.
Boot the phone into recovery mode and connect the phone to your computer via USB
Run "ls -al /dev/block/platform/msm_sdcc.1/by-name" and check the output. Make a note of the partition marked "userdata" - for me, it was /dev/block/mmcblk0p48.
Either: simply use adb pull to copy this file to your computer (this will require about 26 gigs of space), or attempt to mount the file. To use adb pull, execute "adb pull /dev/block/<ID> ./data" (ID being what you marked down). Your data partition will be copied to /data. To mount, use "mount -t ext4 /dev/block/<ID> /userdata". Whatever's left of your data will be on your phone's new /userdata folder.
Use ADB to pull what files you want from /userdata. If you pulled the partition, skip this step.
If you copied the files you wanted over, you're done. If you pulled the entire partition, you're going to want to try and mount it. On Windows, there are various tools to mount Linux partitions, a quick Google will find some good ones. However, if the data is corrupt, it will not work. I recommend attempting to repair the partition on linux, with the command "e2fsck -f -y /path/to/data", replacing the path to your data file as necessary. Once done, run "mount -t ext4 /path/to/data /mnt/data", replacing the paths as necessary.
Once mounted, you can access your data wherever it was mounted. If e2fsck appeared to fix many errors, chances are most of your data will be in the lost+found folder, and you'll need to sort through this yourself. If you're lucky, then your data will be intact and readily usable. Internal SD card data is located at ./media/0.
To fix the partitions and get Android back up and running, you need to install the latest firmware, format your data in TWRP, factory reset, and then flash a ROM again. Here's what I did to do that, without an SD card. If you have an SD card, simply copy your ROM zip to the SD card and skip the final steps:
Make sure you have the latest version of TWRP and ADB, and download the latest copy of the firmware (check the development forum here).
Boot the phone (doesn't matter to what) and run adb reboot bootloader. When your phone reboots, double-check by running fastboot reboot-bootloader.
Put your phone in RUU mode with fastboot oem rebootRUU. The phone will restart and the HTC logo will come up.
Wait a couple seconds, then run fastboot flash zip firmware.zip, where firmware.zip is the firmware you want to flash.
The first time you do this, it will fail saying something like "FAILED (remote: 90 hboot pre-update! please flush image again immediately)". Ignore this, run the last command again: fastboot flash zip firmware.zip
The progress bar will appear and begin filling. Wait until fastboot is finished flashig it (the progress bar may not fill completely), wait an extra 5 seconds or so, and then do fastboot reboot.
The phone will reboot. Android will still be messed up, but you can verify the partitions are in working order by checking adb shell cat /proc/emmc.
Once you know the partitions are working, get back into TWRP/recovery: adb reboot recovery
Format /data and wipe /cache, /data, dalvik/art cache, etc (factory reset). You will lose the contents of your internal storage and everything else.
If you don't have the ROM zip on an sd card, make sure the zip is in the same directory as adb and run adb push rom.zip /sdcard/rom.zip, where rom.zip is the ROM. You can also copy it to the external sd by swapping /sdcard/rom.zip with /external_storage/rom.zip.
Once copied, reboot into recovery and flash the zip. Back to normal!
Click to expand...
Click to collapse
Hey
I have a HTC one m7 verizon & same problem storage decryption failed. See my case here in below post. And please tell me if anything possible. Please......
http://forum.xda-developers.com/verizon-htc-one/help/storage-encryped-htc-one-m7-vzw-s-t3279869

Can't access internal Storage in TWRP

@lost101 I need help with my XT1034. I can't push any files to my phone! When I push a file (like a 250 MB file) It says it finished in 5 seconds, which is a bit unusual. I checked in the file manager in TWRP, and it says the file is only 10 MB. Later inspecting I found out my /data /cache and /sdcard were corrupted! I think I was able to fix /data and /cache, but I can't format /sdcard :crying: I used the mkfs.f2fs command in TWRP Terminal and I was able to fix /data and /cache (I think). But I can't format /sdcard! And If you are wondering how they got corrupted, I believe I had a bad TWRP and when formatting, I think TWRP corrupted them. Looks like Dalvik Cache wasn't affected. Recovery and Bootloader working, ADB and Fastboot is also working. But when I try to check the file system in internal storage, it says "invalid partition," every other partition I checked worked. BTW I'm using TWRP 2.8.7.0 NO-THEME.

/sdcard is emulated by using files in /data/media. You can't format it.

I tried flashing gpt.bin to see if that would do anything but it looks like it didn't have any effect

@lost101 should be tagged now

TWRP > Wipe > Format Data > Yes

@lost101 It says E:Unknown MTP message type: 1

RedKill3r said:
@lost101 It says E:Unknown MTP message type: 1
Click to expand...
Click to collapse
Ignore that, everyone gets it. It means nothing.

@lost101 I still can't push files. The file pushes, but then it gets cut off and says it finished. This is where the problem is. and ADB Sideload isn't working either. I have Motorola Drivers installed.

RedKill3r said:
@lost101 I still can't push files. The file pushes, but then it gets cut off and says it finished. This is where the problem is. and ADB Sideload isn't working either. I have Motorola Drivers installed.
Click to expand...
Click to collapse
Try a different USB cable.

@lost101 FIXED IT!!!!!! My Drivers got corrupted, installing new drivers fixed it. I'm very sorry for wasting your time lost, I am truly sorry. Thank you for replying though.

How Can I Get Out of This Bootloop on My Moto G

I woke up to find my 1st Generation Moto G battery was depleted and on charging it a bit., I switched it on only to find it optimizing my apps. All these (battery getting depleted, app optimization) happen all the time and I wasn't the least worried.
I picked up my phone later thinking it must have been done with the app optimization only to discover it was totally dead while still connected to a power bank. When I try to switch it on, it is stuck on the "Unlock Bootloader" page. I have tried flashing a new stock rom and it does not work.
I attached the image I see when I try to use recovery to wipe. Basically, nothing works. Can anybody help as I just fixed the screen and also out of warranty?

Fastboot flash the latest Factory Firmware Image for your model.
Factory Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219

lost101 said:
Fastboot flash the latest Factory Firmware Image for your model.
Factory Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Thanks lost101, I do know how to flash perfectly well with fastboot. The problem is it flashes successfully but the phone is still stuck on the Bootloader.
I get this particular message on my recovery when I try to wipe either userdata or cache.
blkdiscard on partition /dev/block/platform/msm_sdcc.1/by-name/userdata failed formatting /userdata failed
formatting cache
and
blkdiscard on partition /dev/block/platform/msm_sdcc.1/by-name/userdata failed formatting /cache
wiping clogo

@NaijaAndroid - Can you try booting into TWRP via: fastboot boot twrp.img

lost101 said:
@NaijaAndroid - Can you try booting into TWRP via: fastboot boot twrp.img
Click to expand...
Click to collapse
I do not have a custom recovery presently but when I try to flash TWRP, it flashes successfully with no error message but the phone is still stuck on the stock recovery.

NaijaAndroid said:
I do not have a custom recovery presently but when I try to flash TWRP, it flashes successfully with no error message but the phone is still stuck on the stock recovery.
Click to expand...
Click to collapse
Read again what I told you to do. I did not say for you to flash anything.

@lost101, I just read your instructions again. I can boot in to TWRP. What else should I do after?
Thanks.

NaijaAndroid said:
@lost101, I just read your instructions again. I can boot in to TWRP. What else should I do after?
Click to expand...
Click to collapse
Via PC, do the following wipe: (requires working ADB setup)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22​
You could then TWRP > Wipe > Format Data > Yes, and try flashing a custom ROM.
Edit: You should backup photos or important data before hand.

I just downloaded CM 12.1. How can I transfer the ROM to the phone?
Edit: I have done it.

NaijaAndroid said:
I just downloaded CM 12.1. How can I transfer the ROM to the phone?
Click to expand...
Click to collapse
Recovery mode ADB will work with Linux - unsure about Windows. You could boot into an Ubuntu LiveCD (without installing) and transfer the ROM to phone that way. Otherwise, an OTG usb pen would be another option.
adb push rom.zip /sdcard​

@lost101, I tried to send the Rom via ADB and I got : failed to copy 'Rom.zip' to '/sdcard//Rom.zip' : Read-only file system.
Also, TWRP made my phone to load as MTP on my PC but I could not transfer through that method also. The transfer kept on failing. Seems my internal memory (eMMC) is now Read-only.

NaijaAndroid said:
@lost101, I tried to send the Rom via ADB and I got : failed to copy 'Rom.zip' to '/sdcard//Rom.zip' : Read-only file system.
Also, TWRP made my phone to load as MTP on my PC but I could not transfer through that method also. The transfer kept on failing. Seems my internal memory (eMMC) is now Read-only.
Click to expand...
Click to collapse
Try sideloading the ROM.
TWRP > ADB sideload​adb sideload rom.zip​

lost101 said:
Try sideloading the ROM.
TWRP > ADB sideload​adb sideload rom.zip​
Click to expand...
Click to collapse
I got:
Installing zip file '/sideload/package.zip'
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
Can't install this package on top of incompatible data. Please try another package or run a factory reset
Updater process ended with ERROR: 7
I was trying to use CM 12.1.
So sorry for taking your time. Thanks.

NaijaAndroid said:
I got:
Installing zip file '/sideload/package.zip'
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
Can't install this package on top of incompatible data. Please try another package or run a factory reset
Updater process ended with ERROR: 7
I was trying to use CM 12.1.
Click to expand...
Click to collapse
Try a CM13 ROM.

lost101 said:
Try a CM13 ROM.
Click to expand...
Click to collapse
Same problem as above. I got the same message.

On PC:
adb shell​e2fsck /dev/block/platform/msm_sdcc.1/by-name/userdata​

lost101 said:
On PC:
adb shell​e2fsck /dev/block/platform/msm_sdcc.1/by-name/userdata​
Click to expand...
Click to collapse
I got:
/dev/block/platform/msm_sdcc.1/by-name/userdata is in use.
e2fsck: Cannot continue, aborting.

NaijaAndroid said:
I got:
/dev/block/platform/msm_sdcc.1/by-name/userdata is in use.
e2fsck: Cannot continue, aborting.
Click to expand...
Click to collapse
TWRP > MOUNT > Untick /Data​

lost101 said:
TWRP > MOUNT > Untick /Data​
Click to expand...
Click to collapse
got this after unticking data and trying again:
e2fsck 1.42.9 (28-Dec-2013)
ext2fs_open2: Bad magic number in super-block
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/block/platform
/msm_sdcc.1/by-name/userdata
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:

NaijaAndroid said:
got this after unticking data and trying again:
e2fsck 1.42.9 (28-Dec-2013)
ext2fs_open2: Bad magic number in super-block
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/block/platform
/msm_sdcc.1/by-name/userdata
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
Click to expand...
Click to collapse
A certain percentage of phones end up with corrupt emmc (internal storage) over time. This problem is a fairly common thing. I do recall someone managing to boot an use CM13, despite the read-only userdata. I'm guessing they must have flashed it via TWRP, with the ROM.zip on an OTG usb pen. It may have worked because /system was still partially / fully writeable.