Hello,
At first, i'm french, my english is maybe bad.
I was installed a CM9 Rom on my HTC One S. Run correctly, but no mobil data and network.
A friend advised to me format /system, newbie on Android, i accepted. But now Phone at bricked, i can't acces to Android.
My sdcard is not recognized by my computer, even if mount sdcard in recovery. I have flash CWM 5.8.2.4 and TWRP 2.1.7, but no results.
I'm in impasse ! Thanks you read me.
Good bye !
You are not bricked. As long as you can get into fastboot, you're good.
If you can not see your sdcard in recovery, there is a sticky in Q&A on how to fix unmountable sdcard.
If you can see your sdcard in recovery, there is a post in Android Dev on how to adb push a rom to your phone.
I dont mean see from your computer, but mount and see it in recovery when you choose a zip etc.. or in an adb shell.
-Jobo
Thanks for you answer,
I already test this solutions, but when i push a ROM with ADB, i have a message error "device not found", because a i can't boot on OS, just fastboot.
When i test fix unmount SDcard, i'm block when i do "factory reset", becaus in .log i see "E:Unable to mount /system" and "E:Unable to open ums lunfile: (No such file or directory)"
Can't you get adb when you boot into recovery?
Not being able to mount /system is worrisome. You could try formatting it.
The ums lun file is only to mount your sdcard on your computer. You don't necessarily need it.
Oh yes i can with TWRP, but i have this :
View attachment 1255479
c:\android-sdk\tools>adb push /sdcard cm-9-20120731
cannot stat '/sdcard': No such file or directory
And in my computer, i can see "Disque Amovible H:", but i can't open this.
You have the operands to 'adb push' reversed.
It's:
adb push local_file remote_file_or_dir
But first you have to make sure you can mount /system and /sdcard in recovery.
Thanks !! I have successful with ADB command ! Thanks really !
It's resolved, thank you very much !
Good bye !
Related
I'm trying to run: adb shell, but I keep getting error msg: "adb" is not recognized as file or program.
I have Adnroid SDK r08, lattest from the site, installed on my Windwos XP.
I'm doing this, because I cant mount my SD Card on Clockwork, so I can't proceed Flashing with a new ROM, the phone it self under Android, is recognizing the memory.
It is formated under FAT32 and was re-formated with the phone as a couple of posts suggests.
Could someone help me? Thanks
Before running adb, you should change your working directory to the directory where it is located.
For example, if you've installed android sdk in C:\andsdk, then you should use the following command to use it:
Code:
cd C:\andsdk\tools
adb shell
Done, I can already access to adb shell, but when Im trying to mount the sdcard, it says that its unable to mount.
So when I'm trying to Install ROM from SD Card, at Recovery Menu - Clockwork, it says that its unable to mount the SDCard.
Are you sure that your SD card is inserted properly?
Well the card works perfectly when I'm running Android. No problems at all.
Then, they came up (problems) as soon as I went into Recovery menu (Clockwork) and the phone was rooted perfectly with unrevoked 3.31
Things that I've already tried:
- Format SDCard under Fat32 and re format it with the phone => The SD Card works perfectly under Android but cannot mount on Recovery Menu.
- Format SDCard under Ext3 and 4, same as previous.
Any suggestion are welcome, and thank you so much.
When you ask ADB to list devices ('adb devices'), is yours recognised?
As soon as I got into Recovery Menu:
Ran: adb devices
This is what I got:
List of devices attached:
XXXXXXXXXXX - recovery
Click to expand...
Click to collapse
xxx - corresponds to my phone code
Then I do:
adb shell
mount /sdcard
And I get:
mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: No such file or directory
Any suggestions?
Thank you!
Have you tried mounting the SD card in ADB while booted into Android?
This thread sounds like a similar thing, and might be worth reading.
Hi all,
I'm here because I need your help...
Days ago I installed on my TF101G the recovery CWM 5.8.1.8...
now I can just go into recovery mode and if I try to mount /data I receive the message "no location found"...
how can I push a Rom on my TF to try to install it?
thanks in advance for your help
how to flash a ROM
The ROM to be flashed must be cwm flashable, you cannot flash official firmware unless it is repacked to be cwm flashable.
Your ROM must be a zip file, do not unzip it.
Copy (or adb push) the ROM to /sdcard/
Reboot tab into recovery.
Follow cwm flash instructions. There are many such a manual available on-line, one of them is:
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
You can just jump to section "apply update from sdcard", which tells you how to use cwm recovery to flash a ROM
One thing you should pay attention is:
if the ROM to be flashed is only a update to your current ROM, do not do any wipe work.
If it is a new ROM, you must do the wipe.
You can also try this....
hi Fenice82,
read this forum
http://forum.xda-developers.com/showthread.php?t=1213723
and read message 1 and 313 for mounting and the adb commands for sending cmw flash file to your internal card of your TF.
Make sure you have the cwm flashable rom file on you computer in the adb dir.
good luck.
I'm hege again...
thk nlheiz for your post...
I push the rom in my TF... I tried different location...
data/media
or
data
or
system
or
sdcard
or
sdcard/rom
if I go in adb shell and I use command mkdir to make a new folder like system,data,sdcard I see the the file already exist...
but my tf "can't mount /sdcard/" and at the same time if i try to mount /data from recovery I see the message
"Error mounting /data!"
what can I do now?
edit... maybe this can help you...
via ADB shell
mount data
mount: mounting /dev/block/mmcblk0p7 on /data failed: Invalid argument
How about restore stock recovery and ROM? Here is a recent guide for root/unroot/downgrading:
http://forum.xda-developers.com/showthread.php?t=1622628
I don't have experience with cwm 5.8.1.8, I stayed on 3.2.0.1 because it is possible to flash from external sdcards.
cold you try this:
put our tablet into cwm (volume - plus power and when asked volume +) and connect it to usb on pc.
then on your pc:
adb devices
this should give you a serial number back.....
then try this:
to mount the internal sdcard so that you can push a new rom- use
adb shell
mount /dev/block/mmcblk0p7 /data/
ls /sdcard/
exit
then from your pc, type:
adb push /path/to/your/rom.zip /data/media
I found this here http://forum.xda-developers.com/showthread.php?p=23256536 in post 3......
let me know if this works
e154037 said:
How about restore stock recovery and ROM? Here is a recent guide for root/unroot/downgrading:
http://forum.xda-developers.com/showthread.php?t=1622628
Click to expand...
Click to collapse
thk man... with method 3 I installed new recovery and with it I installed the official update, from external storage, that recovery my tablet...pdate
before official update I tried to install other custom rom but I incurred in encryption problem... with official after the fist boot it automatically resolved the problem
I'm very happy
thk again
Can't mount SD card in recovery. See http://bit.ly/LgBTUN.
Tried fix permissions, mount sdcard in recovery says Error mounting /sdcard, other stuff too. Still no go.
Found forum posts with same problem in several HTC phones but don't think the fix works for TF101.
I'd like to put the Megatron ROM on my TF101 though I'd be happy just to get ASUS upgrades. They keep failing - I think from my Dvorak keyboard mod (see device config below).
Any ideas?
TF101. Stock, rooted rom with modded key mapping for Dvorak keyboard when docked. Android Version 3.2.1. Kernel 2.6.36.3 [email protected] #1, Build Number HTK75.US_epad.8.6.5.19-20111107.
Can you still boot Android or did you already wipe?
I also see ROM manager, which is usually bad news for the TF...
That's a rather old recovery, if you can get ADB access you can try my PERI tool to reflash a newer recovery that should mount properly, and then flash a ROM with that.
Good luck!
First, thanks for the help.
I tried your tool. Besides having entertaining comments, it just left me frustrated.
You can see some screenshots at https://docs.google.com/open?id=0B46V3MQdpAUOek1GRGlvS0FKTms
I'm wondering if the problem is that I can't mount / as RW. Perhaps I'm just not getting the right args to adb's mount command. I think I should be able to remount / RW as I can run "adb shell" and then "su" to get the "#" prompt.
I do think part of the problem is that /sdcard is not actually my sdcard. It is a symlink to /mnt/sdcard which is where the physical sdcard is mounted.
I tried to modify init.ventana.rc. I think that is the right file - I just found it by poking my head around. This is what I wanted to change:
Code:
on early-init
mount debugfs debugfs /sys/kernel/debug
export EXTERNAL_STORAGE /mnt/sdcard
mkdir /mnt/sdcard 0000 system system
# for backwards compatibility
symlink /mnt/sdcard /sdcard
But I can't mount / RW so I can't change it. I tried this:
Code:
$ adb root
adbd cannot run as root in production builds
$
I'm definitely rooted. I can su to root in ADB. I also have a SuperUser that seems to be working.
Update: I can mount / RW via ES File Explorer. I can then adb shell, su, and then update files in /. I pushed my updated init.ventana.rc but when I rebooted it reverted to the original.
I'm terribly frustrated.
Any ideas? I seem to have a totally useless CWM. I can't even put a file on /sdcard/update.zip because the sdcard isn't booted when I'm in recover.
Once I get / mounted RW, can I just copy a working CWM into some system directory?
I've spent half my day messing around with this thing. I'm very comfortable with the command line and would happily do a manual install if someone could tell me how to do that.
I tried the adb equivalent of:
Code:
run_program("/sbin/busybox", "dd", "if=/tmp/recoveryblob", "of=/dev/block/mmcblk0p4");
using the 5.5 recoveryblob but it didn't seem to do anything. If I just knew the magic commands, I'd be happy to do them.
Hi there.
I just released the beta version of my EasyFlasher tool.
Try using that, it'll flash Rogue Recovery for you which should successfully mount the sdcard.
You may need to use that (It's Nvflash based) It won't work on a Tf101G or Sl101 though. Give it a shot.
PERI didn't work because your ADB drivers don't work.
Thanks for your help. I finally got a working CWM by following this thread. I then flashed the CWMs you pointed to.
Problem solved.
Though I can always f-up my upgrade to CM9 and be back here for help in a few hours.
Too Funny
I just posted my thanks reply and then noticed that you two pointed me to the solution that I found.
I appreciate your help and timeliness (and your nvflash program too).
Neil
Got my TF101 BK70 SBK1 in same situation and this thread helped me a lot.
Just put my tf into apx mode (hold up + power for 7 seconds, screen stays black but device manager can see APX device connected, then use Universal Naked drivers to fix it.
After that, just open EasyFlasher and choose which recovery you want.
I also had the same problem, I didn't see this thread so I used this workaround:
if you have the keyboard dock you can mount an external usb drive as the sdcard (under the mount options) and do all the backups/flashing from there
Sent from my Transformer using xda app-developers app
There are two sd cards, the internal sd card which is the phone's built-in USB storage, and external sd card which is the removable sd card that is physically located at the back of the phone and is sealed by your phone's battery.
so technically speaking you should be choosing the "choose zip from external sd card" based on how you described storing your rom.
I'm not sure as to why your sdcard is unmounted, but you can remount it back using CWM. There should be a "mounts and storage" section in CWM menu, where you can remount the internal USB storage by selecting "mount /sdcard".
If you want to recover the data in your Android phone, just go to http://android-recovery.net/.
Need help with this can't mount /sd card /
Here is what I am getting (pics). This is on the Tf101 with CWM via 1 click root method
Moderator Notes: I was asked to sticky this thread as it seems to be a recurring issue and a couple of fixes are in the posts.
Sorry my bad english am latin.
Hi guys first thread here and i need your help. Here s the thing, i was using my tf700, browsering, and the tablet goes off, i tried start up and a bootloop appears. So i go to Recovery (latest TWRP) and i tried to flash a ROM (latest crombi kk), like always i tried to wipe cache and dav bfore flash it but that proces seems to fail, and a couple of messages like unable to mount /data unable to mount /system appears, first time happening, i never had troubles with the tablet. So i tried to get fastboot mode and run the fastboot erase cach command (i read in a forum dat some guy did that and work for him), so i download the adb fastboot files, i connect the tf700 to my laptop (windows 7 64bit) and a installing drivers message and i wait and the driver that is called Transformer did not install, i dont know where to get those drivers, i found a file Asus usb drivers and bla bla but when i unzip the file i get 3 folders and no .exe or installer. So i tried to continue and i enter fastboot mode in the tablet and connect usb tablet-pc, and now another driver installing message appears, now is a driver called Fastboot, so i wait anda again the driver did not install correctly. So i continue and open cmd and tried the comman for erase cache, and only appears the WAITING FOR DEVICE text. i donw know waht to do, i also tried flashing again a ROM, bt only bootloop, trie again to wipe cache and dav but is only unable to mount /data. Any ideas ????
formobicho said:
Sorry my bad english am latin.
Hi guys first thread here and i need your help. Here s the thing, i was using my tf700, browsering, and the tablet goes off, i tried start up and a bootloop appears. So i go to Recovery (latest TWRP) and i tried to flash a ROM (latest crombi kk), like always i tried to wipe cache and dav bfore flash it but that proces seems to fail, and a couple of messages like unable to mount /data unable to mount /system appears, first time happening, i never had troubles with the tablet. So i tried to get fastboot mode and run the fastboot erase cach command (i read in a forum dat some guy did that and work for him), so i download the adb fastboot files, i connect the tf700 to my laptop (windows 7 64bit) and a installing drivers message and i wait and the driver that is called Transformer did not install, i dont know where to get those drivers, i found a file Asus usb drivers and bla bla but when i unzip the file i get 3 folders and no .exe or installer. So i tried to continue and i enter fastboot mode in the tablet and connect usb tablet-pc, and now another driver installing message appears, now is a driver called Fastboot, so i wait anda again the driver did not install correctly. So i continue and open cmd and tried the comman for erase cache, and only appears the WAITING FOR DEVICE text. i donw know waht to do, i also tried flashing again a ROM, bt only bootloop, trie again to wipe cache and dav but is only unable to mount /data. Any ideas ????
Click to expand...
Click to collapse
More likely your data partition got corrupted.
Try wiping it or formatting /data in TWRP to see if that helps? You will lose everything if you don't have backups.
sbdags said:
More likely your data partition got corrupted.
Try wiping it or formatting /data in TWRP to see if that helps? You will lose everything if you don't have backups.
Click to expand...
Click to collapse
i already tried that, wiping (cache, dav, system, ata, factoty reset) anything gives the unable to mount /data error.
formobicho said:
i already tried that, wiping (cache, dav, system, ata, factoty reset) anything gives the unable to mount /data error.
Click to expand...
Click to collapse
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
sbdags said:
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
first of all is an honor chat with the legend sbdags!!! second can u guide me step by step. i did enter in twrp and go to advanced then terminal command then a selection menu appear and said browse to starting folder and a list of folder appears and a botton with Select Folder, wich folder i must select now? i tried just hit the select folder button and then i put the command taht u said and in the terminal said mke2fs 1.41.14 (22-dec-2010) nothing more and nothing happen
sbdags said:
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
Thank you so much sbdags.
You're a life save thought I had softbricked my tf700
Muchas gracias
formobicho said:
first of all is an honor chat with the legend sbdags!!! second can u guide me step by step. i did enter in twrp and go to advanced then terminal command then a selection menu appear and said browse to starting folder and a list of folder appears and a botton with Select Folder, wich folder i must select now? i tried just hit the select folder button and then i put the command taht u said and in the terminal said mke2fs 1.41.14 (22-dec-2010) nothing more and nothing happen
Click to expand...
Click to collapse
Did you unmount data first?
---------- Post added at 07:25 AM ---------- Previous post was at 07:24 AM ----------
chukkie said:
Thank you so much sbdags.
You're a life save thought I had softbricked my tf700
Muchas gracias
Click to expand...
Click to collapse
You are welcome!
EDIT - somehow the format finally took.. after 5 or 6 reboots.. very strange
okay, i hate to bump this thread. but i have been searching for a few nights and i cannot find a solution. i am having the same problem as OP.
Essentially, my tablet was interrupted mid format. I believe my data partition is corrupted. I can access recovery/fastboot and the tablet accepts commands from my PC. i have TWRP 2.7.1.1 on the tablet right now.
i tried what sdbags said:
You'll need to manually format it using the terminal in TWRP
Make sure data is umounted then run this command. Make sure you have charged it as well or leave it plugged in.
It can take a number of hours to complete.
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
this did not work. i got the same "mke2fs 1.41.14 (22-dec-2010)" output, and then the tablet rebooted back into TWRP over again. (data was not mounted, i cannot mount it at all)
some more output from my tablets TWRP console:
Code:
e:could not mount/data and unable to find crypto footer.
e:unable to mount '/data'
e:unable to recreate /data/media folder/
updating partition details...
e:unable to mount '/data'
e:unable to mount internal storage.
e:unable to mount /data/media during gui startup
full selinux support is present.
e:unable to mount /data/,edia/twrp/.twrps when trying to read settings file.
e:unable to mount '/data'
is there another way to fix my corrupted partition?
this did not work. i got the same "mke2fs 1.41.14 (22-dec-2010)" output, and then the tablet rebooted back into TWRP over again. (data was not mounted, i cannot mount it at all)
Click to expand...
Click to collapse
I have exactly same situation
edit: after running this command
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
it prompt
Starting Path : /external_sd
Click to expand...
Click to collapse
and there is also button "KILL" when I hit enter it prompt : /dev/block/mmcblk0p8 is appereatly in use by the system: Will not make a file system here!
Any advice? (sry for being this big noob!)
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
sbdags said:
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
Click to expand...
Click to collapse
Wouw thanks for so fast reply :highfive:.
But I think I'll disepoint you "usb debugging is disabled"
---------------------------------------------------------------------------------------------------------------
Any way I can reinstall stock from fastboot? damn it......
brinza said:
Wouw thanks for so fast reply :highfive:.
But I think I'll disepoint you "usb debugging is disabled"
---------------------------------------------------------------------------------------------------------------
Any way I can reinstall stock from fastboot? damn it......
Click to expand...
Click to collapse
No idea how when and after what exactly but the installation of stock rom started by itself after couple of reboots and couple of command i tried. (I had a file : US_epad-user-10.6.1.14.10.zip on my SD card
sbdags said:
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
Click to expand...
Click to collapse
Probably a Bad Idea - you should unmount /data before formatting. Then it should also not hurt to keep the recovery running.
Unbrick my TF 700t
Accidentally, bricking my tablet
I try Advance and Terminal Command with TRWP at tablet, it did not work
but when I try with command from PC (desktop), it works like a charm. I was able to see internal storage
from that just re install Custom ROM. Thank alot to sdbag
Thanks
sbdags said:
Code:
adb shell
killall -19 recovery
make_ext4fs /dev/block/mmcblk0p8
reboot
Type in those commands via a usb connection to your device whilst it is in recovery.
Click to expand...
Click to collapse
Wow. you are a life saver. that worked for me.
player50 said:
Wow. you are a life saver. that worked for me.
Click to expand...
Click to collapse
Glad it worked. Everyone should keep those commands handy
Thanks a lot...
After a long research I have found your thread.
I have almost given up looking for this damn issue...
At last, It became real! You are a real life saver.
sbdags help!
1) i dont know how to unmount data .
2) when i click advanced then terminal command it opens- Browse to starting folder and gives the file manager kind of view.
3) so i tried using adb on computer
the first three command work(i think but the third gives this error not enough space) .
please suggest a solution. thank you in advance
device moto g xt1033
i tried downgrading from lollipop 5.0 brasilian to kitkat but it wont go past warning bootloader unlocked screen. when i flash cm from twrp, it gives 3 errors
E:/ unable to mount '/data'
E:/ unable to mount '/cache'
E:/ unable to mount internal storage
then when i start it just keeps on loading on cm logo
should i create a separate thread for all this?
'
SemiNoob314 said:
1) i dont know how to unmount data .
2) when i click advanced then terminal command it opens- Browse to starting folder and gives the file manager kind of view.
3) so i tried using adb on computer
the first three command work(i think but the third gives this error not enough space) .
please suggest a solution. thank you in advance
device moto g xt1033
i tried downgrading from lollipop 5.0 brasilian to kitkat but it wont go past warning bootloader unlocked screen. when i flash cm from twrp, it gives 3 errors
E:/ unable to mount '/data'
E:/ unable to mount '/cache'
E:/ unable to mount internal storage
then when i start it just keeps on loading on cm logo
should i create a separate thread for all this?
'
Click to expand...
Click to collapse
Question: Why don't you care to read the short thread from beginning?
das chaos said:
Question: Why don't you care to read the short thread from beginning?
Click to expand...
Click to collapse
i am really sorry if the earlier comment came out as rude.
actually i did all of those steps, using the command terminal, using adb from pc but none of them worked, all of them had some problem
Title says it all. a lady brought me her moto g and on the screen all it had was no command and the android with the triangle !. so i booted it in to the bootloader and installed a custom recovery. tried to mount the sd card so i could recover her data off of it and it failed to mount so i tried mounting /data and it wouldnt mount and it says /data directory doesnt exist. /system would mount and several others would mount. so my question is, is this phone f***ed or is there a way to restore the /data directory through fastboot flashing?
Thanks for your time
Anthony
krypticos said:
Title says it all. a lady brought me her moto g and on the screen all it had was no command and the android with the triangle !. so i booted it in to the bootloader and installed a custom recovery. tried to mount the sd card so i could recover her data off of it and it failed to mount so i tried mounting /data and it wouldnt mount and it says /data directory doesnt exist. /system would mount and several others would mount. so my question is, is this phone f***ed or is there a way to restore the /data directory through fastboot flashing?
Thanks for your time
Anthony
Click to expand...
Click to collapse
Try and reflash the system partition and boot into android. Then look for /data. /data might be corrupted...