I buy a new oukitel k6000 pro and want to root it. By mistake i root wrong then i found the correct rom for it and flash it every thing went normal but invalid IMEI number, I tried almost every method available on net to fix it but no result. i root the device try with MTKdroid no result with SN writer give error Enter in meta mode failed, IMEI changer in mobile , Mobile uncle with IMEI.bak , I went to engineering mod but in connectivity tab i have no option available for CDS information so what should i do please help me.
arshadfaraz84 said:
I buy a new oukitel k6000 pro and want to root it. By mistake i root wrong then i found the correct rom for it and flash it every thing went normal but invalid IMEI number, I tried almost every method available on net to fix it but no result. i root the device try with MTKdroid no result with SN writer give error Enter in meta mode failed, IMEI changer in mobile , Mobile uncle with IMEI.bak , I went to engineering mod but in connectivity tab i have no option available for CDS information so what should i do please help me.
Click to expand...
Click to collapse
Hi,
As there isn't a dedicated forum for your device here try posting your query is in:
> Android Development and Hacking > Android Q&A,Help and Troubleshooting.
You can hopefully find some support there.
Good luck
Related
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool. Is it any problem with my Motherboard.)
Hi there,
I'm sorry but I can't find anything related to your question/device because we don't have any forum/thread with development for this device.
Please post that in the forum bellow for more answers from the experts. Register an account on XDA for that.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello guys.. I recently bought a Lenovo K3 Note (K50 T5) MT6752.
I've rooted it and put official ROM with FlashTool from NeedRom website;
(I put the standard version and the system updater, updated it to Update 1522.
I have problem with my IMEI in both sim cards, I can't access a network..
Dial code *#06# says "Invalid" in both IMEI;
I have tried anything..
I have tried to place them from Engineer mode. Not any dial command works I have tried... nothing at all;
I used Mobile Uncle Tool 2.9.9 from Play Store and I can't access Engineer Mode (MTK), only Android with some informations and ****;
I already have a IMEI.bak file with my IMEI numbers and I literally can't place them.
I have tried:
1. Engineer Mode > CDS Information > Radio Information and put the command. on "AT(no-space)+EGMR=1,7,”IMEI” says "Cannot use this command on UserBuild" or something like that;
When I use "AT(space)+EGMR=1,7,”IMEI” it says "Command is sent: ERROR"
2. I tried MtkDroidTool 2.5.3, When it connects, the "IMEI/NVRAM" button is disabled. When I tried to ROOT, after a short time it says "Communication Loss with device blah blah"
3. I have tried Mobile Uncle Tools and when I tap "IMEI Backup Restore (MTK)", it says "No Support"
Please I have tried everything, Can you help me please? I've been searching for 2 days!!!
Please help me someone, I'm really desperate!!!
Hi,
Thanks for using XDA Assist If you have not done any IMEI backup of your device then you have to take your device to Service Center. do not use IMEI backup of any other device of your model has IMEI no's are unique. get it repaired by your Official Service Center
Good Luck!
jackeagle said:
Hi,
Thanks for using XDA Assist If you have not done any IMEI backup of your device then you have to take your device to Service Center. do not use IMEI backup of any other device of your model has IMEI no's are unique. get it repaired by your Official Service Center
Good Luck!
Click to expand...
Click to collapse
no, the IMEI.bak file is created with my own IMEI numbers... but I have created it with IMEI tool... and as I mentioned above... I can't find a way to put it inside.. can you help me please?
bump
Hi,
Please visit here [GUIDE][MTK][EASY]Fix invalid IMEI , this may help you if this doesnt solve then kindly post here Android Q&A, Help & Troubleshooting so that experts using your device may help you
Good Luck!
Hello masters developer,
i have a smartphone Goophone S5 (duplicate Galaxy S5) . I had big problems with fixing the GPS satellite, and so we wanted to play ROMs . At first I thought, but needed to do CWM . According to the instructions I downloaded the driver , Smartphone MTK Flash Tool and Droid Tools. Everything installed and Flash Tools created Readbeck ROM_0 . I then created automatically CWM and other relevant instruments . When recording CWM but it went wrong and my phone will not turn on .
In the overall withdrawal will play , but I still can not turn on the phone . When selecting a site download, upgrade firemwaru give me an error message ERROR BROM see image. Phone has MTK MT6592.
I welcome any advice
Hello,
I'm not finding a specific forum for your device/issue. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Hi again guys, i have a BIG! problem i tried every method to fix it but with no result so this is what happend my phone got in a bootloop after flashing the wrong cwm and then i decided to fix it with Alcatel Software Upgrade Tool so i fixed it after the boot i seen my IMEI is INVALID how to fix it ? Engineering mode gives me an error ,,AT command failed to send'' the other methods dont work too .. can i do something to fix it ? (phone: Alcatel OT Pop C5 [5036D] ) my baseband is ok and the radio_state shows off in the engineering mode
Hi, Thanks for using XDA assist
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.
Hello,
love this forum and first time i need to register because Iam stuck.
I have smartphone Alcatel one touch Pop C2 with MTK chipset
Now i want to change IMEI.
I rooted it and wanted to do with mobileuncle apk and engineering mode, but both times when i usethe apps after clicking on button "send AT command" he says "AT command is failed to send".
i cannot send link of tutorial because i need to have 10 posts....
Thank you for your help!!!
Trapple2 said:
Hello,
love this forum and first time i need to register because Iam stuck.
I have smartphone Alcatel one touch Pop C2 with MTK chipset
Now i want to change IMEI.
I rooted it and wanted to do with mobileuncle apk and engineering mode, but both times when i usethe apps after clicking on button "send AT command" he says "AT command is failed to send".
i cannot send link of tutorial because i need to have 10 posts....
Thank you for your help!!!
Click to expand...
Click to collapse
Changing IMEI cannot be discussed at XDA, it's against the rules.
Thread closed. The reason is listed in the previous comment