Database Info

ROM Update Problem

I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help

You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.

Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help

Hmm, can u fully upgrade your rom ?

Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo

I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.

[Q] Xperia Ray st18i booting prob ..

Guys , I was on Jelly Sandwich with sirikay's kernel. I had some speed problems with wifi. So I thought of flashing stock ICS Rom ST18i_4.1.B.0.587_Kernel.ftf using uniflash.exe and did it. After flashing it didnt restart. So I clicked the power button to restart manually but just got a vibration sound and nothing else .. just the blank screen. So I searched for stuff about unbricking my device since I thought it's bricked. I downloaded this package "FlashTool_0.2.9.1_FOTAUnbrick.exe" and started flashing the firmwares. So I held down my volumedown button and connected it to the usb port. It says error and that I have to select usb debugging mode and connect again but I can't even start my mobile.
Plz help .. Thanks in Advance

Try using flash tool!
and flash stock ftf through that.....
Sent from my Xperia Neo V using xda premium

Hi
I confirm, just had the same problem while updating a custom ROM.
Get the Stock ftf file for your phone/model then use Flashtool to flash it.
Search the forum for the proper links there are likely to be all there somewhere
Hopefully, your phone will be back to life on a stock version.
And yes, if you want to re-install a custom ROM you need to re-do all the process: root, (optional) unlock Bootloader etc.
Good luck.
PS: I saw a thread saying to use the SEUS to restore the phone to stock. Worth a try but for me it didn't work since SEUS was telling my phone already had the latest version. Fix hard bricked ray

[Q] [C2304] Some help to unbrick my XC (red led)

So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.​
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.​

sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.​
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.​
Click to expand...
Click to collapse
I did the same thing like you and had same issue.
Unfortunately, we cant use Flashtool/ SUS/ Perfect Flash to unbrick because there have no driver for our xc.
So, I sent back to SONY yesterday.

Fix your problem using this way
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.​
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.​
Click to expand...
Click to collapse
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem

iSiddharth said:
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
Click to expand...
Click to collapse
this method doesnt work when you flash a rom for a different device like i did i already order a new motherboard for my xc. this only will solve it...changing motherboard.

And by the way if Red Light is shown then it is Soft Brick and you can very easily repair it. If that light is also not there then you can say that it is a hard brick.

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number

Issue resolved, thread closed, thanks.

S7 g930w8 problem

hello , this is first thread to me in the forum , im facing problem with my phone g930w8 , it started when i turn on my phone it restart itself , i tried to go to hard factory reset , power and volum up and home buttion the phone gaved me problem about not finding file or folder recovery , so i re tried to reboot the phone he put me in screen android no command , i try to flash the os with odin , it flashed but also problem remain same ... the phone on latest updates can anyone help me please?

please any help ? sugggestion?

uppp please anny help?

ANY HELP

witch stock rom did you flash !?
flashing stock rom with 4 files should fix any problems!