AP Fastboot Flash Mode (Secure)
BL: 80.CB (sha-cfa8344, 2015-11-20 18:51:42)
Baseband: <not found>
Product/Variant: osprey XT1550 16GB P2B
Serial Number: ZY222VMSZ5
CPU: MSM8916
eMMC: 16GB Samsung RV=07 PV=06 TY=57
DRAM: 2048MB Samsung S8 SDRAM DIE=8Gb
Console [NULL]: null
Battery OK
Device is locked. status code:0
Software status: modified
i don't know how to fix it, i'm dying with it. any suggestion for it.....
You can't boot? And if you can it's an common bug on the bootloader and it doesn't seem to affect the device.
In my device it occurs when I have no SIM inserted.
Related
I have a cell g3 bike, or left on top of a table to go to sleep. I woke up it was him this message
AP Fastboot Flash Mode(S)
48.86 (sha-5497c4, 2015-01-17 15:10:51)
CPU: MSM8226 CS
eMMC: 16GB Sandisk RV=07 PV=01 TY=57
DRAM: 1024MB Elpida S4 SDRAM DIE=4GB
Battery OK (Charging)
Device is LOCKED. Status code: 0
Transfer Mode: USB Connected
-------------------------------------------------------
Boot Mode Selection Menu
Vol Up Selects, Vol Down Scrolls
Normal Powerup
Recovery
Factory
Barcode
BP Tools
-------------------------------------------------------
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
Fastboot Reason: Fall-through from normal boot mode
USB connected
He is original manufactures or without a change, also did not want to do anything that would not, do not wanna lose my warranty
Sorry my text but I am Brazilian:crying::crying::crying::crying:
process stop here
i tried 2 time but same result.
any solution?
device info:
dev[1] SH1BMVN04965
Mode: fastboot
Hardware: pico
Manufactory: HTC
MID: PJ0310000
Device Info
Security status: S-ON
Model Id: PJ0310000
Custom Id: VODAP034 (VODA-EU)
Serial number: SH1BMVN04965
Product: pico
IMEI: 357953049560823
Platform: HBOOT-7225A
Bootloader ver: 1.03.0000
Baseband ver: 1.11.82.17
Cpld verersion: None
Microp version: None
Main version: 1.29.161.3
Battery Status: good
Battery Volt: 4124mV
PartitionLayout: HTC
Commitno bl: 30d3dcb5
Hbootpreupdate: 12
i am waiting for reply from someone handsome..........
please solve my problem.
I have a problem with and unlock my galaxy N9250T with Z3X SamsungToolPRO_24.3 it gives me this message.
Operation: Read Codes
Selected model: SM-N920T
Software version: 24.3
Please wait, generating hash codes file, this can take few minutes... OK
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-N920T
Android version: 5.1.1
Product code: SM-N920TZWATMB
Phone version: N920TUVU2COJ5
PDA version: N920TUVU2COJ5
CSC version: N920TTMB2COJ5
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone S/N: RF8G903HHRY
Modem board: SHANNON333
RF cal date: 20150902
IMEI:
Checking Super user right... true
Initialization AT RIL...
Exception: Access violation at address 004074E0 in module 'SamsungToolPRO.exe'. Read of address 00000000
Done with Samsung Tool PRO v.24.3
I have the same damn problem...
Operation: Unlock SPRNT
Selected model: SM-N920P
Software version: 24.3
Waiting ADB device... OK
Reading phone info...
Model: SM-N920P
Android version: 6.0.1
Product code: Not Active
Phone version: N920PVPS3BQB1
PDA version: N920PVPS3BQB1
CSC version: N920PSPT3BQB1
CSC country code: USA
CSC sales code: SPR
HW version: N920P.04
Phone S/N: 00000000000
Modem board: MDM9635M
RF cal date: 2016.01.21
IMEI:
Initialization AT RIL...
Exception: Access violation at address 004074E0 in module 'SamsungToolPRO.exe'. Read of address 00000000
Done with Samsung Tool PRO v.24.3
Platform: LG Qualcomm
Selected port: COM18
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Performed by 2.4.6 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM18
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Failed!
Performed by 2.4.6 Software version.
Any Solution ?
I'm not sure what the problem would be since the software and box should force flash the phone, assuming the phone is not physically damaged.
I have been repaired, But what is the Solution Of " Mobile network Not Available ' And ' No Signal " ?
Was the phone dropped? Possible loose internal connection? Phone is showing the correct imei?
Yes It's Have A Correct Imei , I'm not dropped the phone ...
is The problem Of Hardware ?
have a xt1032, was with the gpe 4.4.4 and had the bootloader unlocked, I got the ota to 5.0.1, at the end of the update died totally, not to nothing, with a tutorial I can revive it in fastboot mode, but from there No passing will not let me flash any firware, they are my last hope.
Sorry for my bad english
This is what you put in fastboot mode
AP FASTBOOT MODE (S)
41.1A (*) (sha-80481ae, 2015-04-10 14:30:28)
CPU: MSM8226 CS
eMMC 16GB TOSHIBA RV=06 PV=01 TY=17
DRAM: 1024MB HYNIX S4 SDRAM DIE=4GB
BATTERY OK
DEVICE IS LOCKED. STATUS CODE: 0
CONNECT USB DATA CABLE
BOOT MODE SELECTION MENU
VOL YP SELECTS, VOL DOWN SCROLLS
NORMAL POWERUP
RECOVERY FACTORY
BARCODES
BP TOOLS
QCOM
FASTBOOT REASON : VOLUME DOWN KEY PRESSED
FAILED TO VALIDATE BOOT IMAGE
BOOT UP FAILED
You need to unlock your bootloader. Then you can flash stock firmware:
https://forum.xda-developers.com/showthread.php?t=2537119
https://forum.xda-developers.com/showthread.php?t=2542219
I have the same issue. can I get my data backed up before unlocking my phone?