Platform: LG Qualcomm
Selected port: COM18
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Performed by 2.4.6 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM18
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Failed!
Performed by 2.4.6 Software version.
Any Solution ?
I'm not sure what the problem would be since the software and box should force flash the phone, assuming the phone is not physically damaged.
I have been repaired, But what is the Solution Of " Mobile network Not Available ' And ' No Signal " ?
Was the phone dropped? Possible loose internal connection? Phone is showing the correct imei?
Yes It's Have A Correct Imei , I'm not dropped the phone ...
is The problem Of Hardware ?
Related
Hi,
I need vpn connection to cisco vpn server so i have tried to install corresponding soft to my galaxy tab. Finally I am stopped with following problem:
I try to follow this: http://forum.xda-developers.com/showthread.php?t=1013513
But when I input
"insmod tun.ko" I receives:
tun: version magic '2.6.32.9 SMP preempt mod_unload modversions ARMv7 ' should be '2.6.32.9 preempt mod_unload ARMv7 '
My kernel version is 2.6.32.9 ([email protected] #1)
Build number is FROYO.XWKB8
Microcode version is 2.2.1
Where can I find correct version of tun.ko?
Thanks.
Sorry for bad English
Can anyone copy files or compile for bluetooth usb adapter for Chinese Tablet and serial fdti?
I try too install two file but i have problem:
- one have wrong vermagic "vermagic=3.0.8+ SMP preempt mod_unload ARMv7"
- second one "Exec format error" disagrees about version of symbol module_layout
My tablet have:
- Android 4.0.3 (kernel 3.0.8)
- CPU ARMv7 rev2 (v7l)
- Hardware sun5i
- vermagic=3.0.8 preempt mod_unload modversions ARMv7
I think Allwinner A10 have the same configuration.
UPDATE: I DONT KNOW IF CHANGING THE CABLE IS WHAT FINALLY DID IT, BUT IT IS DONE. THANK YOU ANYWAY. SORRY I POSTED SO SOON. I DONT USUALLY DO THAT. ALSO, IT WAS THE Z3X THAT FINALLY DID THE TRICK. ALSO THE FILE SIZE WAS 2.15K. ANY BODY ELSE THAT MAY WANT MORE DETAILS I WILL BE GLAD TO HELP.
Hey guys I really need some help and I am unable to find anything about it. I keep getting this error. Security damaged. I do the repair, it says its good then when I try and repair the imei it errors out. Here is the print out.
Platform: Samsung Android
Selected port: COM14
Selected model: SM-G925T
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G925T-Unknown14-10-2015_00-35-44-.asec file
Wiping EFS...
Phone will restart now. Please don't disconnect cable!
EFS wipe successfully
Searching for a phone. Please wait...
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Repairing security
Security repair successfully
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM14
Selected model: SM-G925T
Selected file: C:\Users\John\Downloads\cert-sm-g925t_359146060661913_r58g50kgewk.cert
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Checking Certificate file...
Certificate file successfully checked
Phone connected successfully
Writing certificate...
Security damaged, please Repair Security and try again
Well I started comparing file size and the file that is in the phone is 2.15k, while the other g925t, as well as the other vairents of this cert are all 2.16k. Now when I flash with either octo or z3x I get the security damaged. I did find one file that was 2.15k and did get a successful flash, which gave me a ser #, but a defective imei. Please help.
Welcome to Octoplus/Octopus Box Samsung software version 2.0.4
-----------------------------------------------------------------------------------
To connect SM-G925T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SM-G925T
Selected file: C:\Users\John\Downloads\cert-sm-g920t-
357746060831994-r58g31myxyb.cert
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: R58G50TKDNH
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Checking Certificate file...
Certificate file successfully checked
Phone connected successfully
Writing certificate...
Security damaged, please Repair Security and try again
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SM-G925T
Selected file: C:\Users\John\Downloads\Cert-SM-G900-
358021058471446-RF1D93A24AK.cert
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: R58G50TKDNH
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Checking Certificate file...
Checking Certificate failed
Writing Certificate failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SM-G925T
Selected file: C:\Users\John\Downloads\cert-sm-g925f_
359521066036817_rf8g51vfezn.cert
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: R58G50TKDNH
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Checking Certificate file...
Certificate file successfully checked
Phone connected successfully
Writing certificate...
Security damaged, please Repair Security and try again
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SM-G925T
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: R58G50TKDNH
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G925T-Unknown14-10-2015_04-34-29-.asec
file
Wiping EFS...
Phone will restart now. Please don't disconnect cable!
EFS wipe successfully
Searching for a phone. Please wait...
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: R58G50TKDNH
Android version: 5.1.1 (LMY47X)
Repairing security
Security repair successfully
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SM-G925T
Selected file: C:\Users\John\Desktop\cert-sm-g920f_35984506420518
_rf8g410tn3e.cert
Detected phone model: SM-G925T
Firmware compiled date: Sat Sep 19 16:29:03 KST 2015
PDA version: G925TUVU3DOI1
CSC version: G925TTMB3DOI1
SW version: G925TUVU3DOI1
Phone IMEI: Unknown
Phone SN: R58G50TKDNH
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Checking Certificate file...
Certificate file successfully checked
Phone connected successfully
Writing certificate...
Security damaged, please Repair Security and try again
PLEASE PUT THIS IN THE RIGHT PLACE. I AM SO FLUSTERED BY THIS I may have PUT IT IN THE WRONG PLACE.
Hi,
Glad to know you got it fixed
Thread closed
-----SYSTEM INFORMATION-----
Build: lineage_a5y17lte-userdebug 7.1.2 NJH47F 6130578a64 test-keys
CM version: 14.1-20180213-UNOFFICIAL-a5y17lte
Build fingerprint: 'samsung/a5y17ltexx/a5y17lte:7.0/NRD90M/A520FXXS2AQF2:user/release-keys'
Bootloader: A520FXXS2AQF2
Radio: A520FXXS2AQF2
Network: MOBITEL
Kernel: Linux version 3.18.14-gacc44c75f95 ([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Feb 14 00:28:08 CET 2018
Command line: console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 DynSysLog=0 androidboot.debug_level=0x4f4c ess_setup=0x46000000 [email protected] [email protected] charging_mode=0x30 s3cfb.bootloaderfb=0x67000000 lcdtype=4259858 consoleblank=0 vmalloc=384m sec_debug.reset_reason=7 ehci_hcd.park=3 oops=panic pmic_info=3 ccic_info=1 cordon=277790bc1ea6f80f42cb0c7577a5e3b3 connie=SM-A520F_OPEN_EUR_dcf53c782347f3688fd08e45ccf1e757 fg_reset=0 androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=A520FXXS2AQF2 androidboot.selinux=enforcing androidboot.security_mode=1526595584 androidboot.ucs_mode=0 androidboot.hw_rev=8 androidboot.hardware=samsungexynos7880 androidboot.warranty_bit=1 androidboot.hmac_mismatch=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=5200ed5afeed64c3 snd_soc_core.pmdown_time=1000 androidboot.em.did=07740e7bccf8 androidboot.em.model=SM-A520F androidboot.em.status=0x0 reserve-fimc=0 firmware_class.path=/vendor/firmware factory_mode=0
Bugreport format version: 1.0
Dumpstate info: id=1 pid=7364
-----------------------------------------------------------------------------------------
My volume is way too loud after I did a backup onto my external sdcard.
When I first got this error, I formatted my device and flashed LineageOS again and it fixed the problem. Now i've been using my phone for a while and I don't want to lose all my data and stuff again.
I don't even know where should I start, so tell me if you need more information about bug.
I know about mixer_paths.xml but there is no label for speakers or something like it should be.
Thanks for all help!
p.s. sorry for bad english
Thread closed as per OP request
Hey guys, i need some help with something.
I have a chinese device ( SLIDE SP 4013)
Here's the info:
BB chip: MT6580
MS Board: t53_A_X40
Build Time: 2016/10/25 13:10:17 CST
Kernel Ver: 3.10.72 ([email protected]) (gcc version: 4.8) (GCC)
#1 SMP PREEMPT tue Oct 25 13:22:37 CST 2016
Android Ver: 5.1
SWver: ALPS.L1.MP6 V2_ALONG6580.WE L_P18
Custom Build Verno: Unknown
Modem Ver: MOLY.WR8.W1449.MD.WG.MP.V6.P10 2016/08/10 01:43
Bar Code: 10
I've tried to unlock bootloader via fastboot ( fastboot oem unlock), but the bootloader is locked.
I Need to root this phone and instal CWM recovery as well. (bootloader locked)
Screen is brocken, so touch-screen doesn't work but it displays.
Any idea about it?
Regards