Database Info

p999 login problem

need helpe for thes p999 login prblem and info by lg tool
Connecting with P999
For connect with phone you must:
1. Unplug usb cable and reconnect battery
2. Press VolDown-key & PowerUp-key and wait for LG logo
3. Release PowerUp-key and wait for Download logo
4. Release VolDown-key and plug usb cable
Connected
Receiving phone info
Getting phone info
Model: P999
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 64 MB + 512 MB
NAND Flash Size: 128 MB + 8 GB
CPU: MDM6200 + NVIDIA Tegra AP20H
Firmware Released: Mar 27 2011 10:12:24
Firmware Compiled: MAR 27 2011 10:00:00
Firmware Version: P9992097/M6600A-SCAUTNZ-2.0.9720T
IMEI: 012571-00-273213-5
Bluetooth Address: B0:89:91:E9:E1:03
Flash Device Name: H8BCS0QG0MMR
Flash Vendor ID: 0x000000ad
Flash Product ID: 0x000000b1
Flash FS Blocks: 0x000001c2
Flash Pages Per Block: 0x00000040
Flash Bytes Per Page: 0x00000800
Flash Bytes Per Spare: 0x00000040
Connect mode: Normal
Info received
Receiving phone info
Getting phone info
Model: P999
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 64 MB + 512 MB
NAND Flash Size: 128 MB + 8 GB
CPU: MDM6200 + NVIDIA Tegra AP20H
Firmware Released: Mar 27 2011 10:12:24
Firmware Compiled: MAR 27 2011 10:00:00
Firmware Version: P9992097/M6600A-SCAUTNZ-2.0.9720T
IMEI: 012571-00-273213-5
Bluetooth Address: B0:89:91:E9:E1:03
Flash Device Name: H8BCS0QG0MMR
Flash Vendor ID: 0x000000ad
Flash Product ID: 0x000000b1
Flash FS Blocks: 0x000001c2
Flash Pages Per Block: 0x00000040
Flash Bytes Per Page: 0x00000800
Flash Bytes Per Spare: 0x00000040
Connect mode: Normal
Info received
Restoring to factory defaults
This phone require manual Factory Reset.
For Factory Reset you must:
1. Unplug usb cable and battery.
2. Plug battery and power on phone.
3. Type code 1809#*999# to call Qualcomm menu.
4. Go to "Factory Reset", select "OK" and reboot the phone.
5. Factory reset must be completed after next boot.
Factory defaults successfully restored
Unlocking phone
Unlock: Start
Getting phone info...
Getting phone info: OK
Switching to internal loader...
Switching to internal loader: OK
Sending external loader...
Sending external loader: OK
Switching to external loader...
Switching to external loader: OK
Dumping Security...
Dumping Security: OK
Backuping Security to file: Backups\P999_security_012571002732135_2012-5-5_6-15-53.sbf
Unlocking Security: OK
Flashing Security...
Flashing Security: OK
Switching to normal mode...
Switching to normal mode: OK
Unlock: Finish
Phone successfully unlocked
Don't forget to reconnect battery
Disconnected

Problem with flashing XT926 via rsd phone stuck in Red Motorola Logo

Hi
Last night i trying to clean my Instagram cache (Near 1.5 GB ) in that progress my phone going crazy and freezing and i hold power button for restarting phone but after phone restarting my device stuck in red Motorola logo
also recovery and fastboot still working so i trying to wipe my cache partition and factory rest but after wiping and factory rest phone still stuck in red logo , so i trying for flashing my phone with "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF" because my phone was updated to last version via OTA to last firmware without unlocking boot loader.
After removing var line in .xml file my phone have problem with flashing
this is what i see in my fast boot screen in my phone display
10.98(*) (sha-61146a2,2014-07-29 )
device is locked status code 0
battery ok
field to read signature for partition about
RSD 6.2.4 Log :
11/28/15 19:43:38 New Log Started For Software Download.
11/28/15 19:44:31 The FlashLog key is turned off.
11/28/15 19:44:36 Arrival, interface=28(0x0), device id=28.
11/28/15 19:44:40 Multi upgrade started for 1 phones
11/28/15 19:44:40 [Device ID: 0] 1/16 oem fb_mode_set
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn"
11/28/15 19:44:40 ERROR: 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL. - on device ID 0.
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL.
11/28/15 19:44:40 ERROR: Failed flashing process. - on device ID 0.
11/28/15 19:44:40 Multi upgrade finished.
11/28/15 20:05:32 Removal, interface=28(0x0), device id=28.
How can fix my phone ????
Sorry for my bad English.

kami_vile said:
Hi
Last night i trying to clean my Instagram cache (Near 1.5 GB ) in that progress my phone going crazy and freezing and i hold power button for restarting phone but after phone restarting my device stuck in red Motorola logo
also recovery and fastboot still working so i trying to wipe my cache partition and factory rest but after wiping and factory rest phone still stuck in red logo , so i trying for flashing my phone with "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF" because my phone was updated to last version via OTA to last firmware without unlocking boot loader.
After removing var line in .xml file my phone have problem with flashing
this is what i see in my fast boot screen in my phone display
10.98(*) (sha-61146a2,2014-07-29 )
device is locked status code 0
battery ok
field to read signature for partition about
RSD 6.2.4 Log :
11/28/15 19:43:38 New Log Started For Software Download.
11/28/15 19:44:31 The FlashLog key is turned off.
11/28/15 19:44:36 Arrival, interface=28(0x0), device id=28.
11/28/15 19:44:40 Multi upgrade started for 1 phones
11/28/15 19:44:40 [Device ID: 0] 1/16 oem fb_mode_set
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn"
11/28/15 19:44:40 ERROR: 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL. - on device ID 0.
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL.
11/28/15 19:44:40 ERROR: Failed flashing process. - on device ID 0.
11/28/15 19:44:40 Multi upgrade finished.
11/28/15 20:05:32 Removal, interface=28(0x0), device id=28.
How can fix my phone ????
Sorry for my bad English.
Click to expand...
Click to collapse
I have the same problem why no one answer ;(

Moto cell G3 trava fastboot, original factory

I have a cell g3 bike, or left on top of a table to go to sleep. I woke up it was him this message
AP Fastboot Flash Mode(S)
48.86 (sha-5497c4, 2015-01-17 15:10:51)
CPU: MSM8226 CS
eMMC: 16GB Sandisk RV=07 PV=01 TY=57
DRAM: 1024MB Elpida S4 SDRAM DIE=4GB
Battery OK (Charging)
Device is LOCKED. Status code: 0
Transfer Mode: USB Connected
-------------------------------------------------------
Boot Mode Selection Menu
Vol Up Selects, Vol Down Scrolls
Normal Powerup
Recovery
Factory
Barcode
BP Tools
-------------------------------------------------------
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
Fastboot Reason: Fall-through from normal boot mode
USB connected
He is original manufactures or without a change, also did not want to do anything that would not, do not wanna lose my warranty
Sorry my text but I am Brazilian:crying::crying::crying::crying:

Flashing TWRP on Ulefone Power doesn't work

Hello.
I have tried flashing the recovery partition on my Ulefone Power in 2 ways.
Boot to ROM.
Go to options -> “About phone”, click the compilation number several times to become a developer.
Enable OEM unlock.
Boot to fastboot.
“fastboot devices” in admin CMD shows my phone.
“fastboot flashing unlock”; pressed volume up to agree; successful
“fastboot flash recovery image.img”; successful
After that, when I reboot my phone to recovery or even ROM it goes into a loop of booting. I see Ulefone logo for several seconds, then it disappears for another few and the cycle is repeated.
I've also tried to flash it from the official Ulefone tutorial. But when it comes to connecting my device I get an error:
Code:
PMT changed for the ROM; it must be downloaded
From what I read, I first have to format the whole partition, flash TWRP and only then flash ROM from TWRP. So that's what I did.
Reinstalled ROM just in case.
Used SP_Flash_Tool_Win_v5.1620 to format the partitions with option "Format whole flash without bootloader". Successful.
Used SP_Flash_Tool_Win_v5.1620 to flash TWRP choosing its scatter file. Successful.
After that, I can boot neither to recovery nor to ROM. In order for the phone to work I have to flash the ROM again with SP_Flash_Tool_Win_v5.1620.
Oh, and I tried 3 different .img files for TWRP, 2 of which I downloaded from the official tutorial and one TWRP 3.0.2-1 from NeedRom.com.
Any idea what I'm doing wrong? I can live with flashing TWRP with either of these 2 methods.

I have also tried to root my phone with apps KingRoot and KingoRoot to install something like Flashify and flash recovery from ROM. But these apps failed to root my phone.
And finally, I've tried booting the recovery from fastboot with:
Code:
fastboot boot recovery.img
...but I got the following error:
Code:
C:\Users\mrjigsaw\Desktop\Smartphone\ulefone Power_Android 6.0_20160517>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.799s]
booting...
FAILED (remote: invalid kernel address: not lie in memory)
finished. total time: 0.820s
Fortunately this error appears on whole 2 pages in Google...
Any ideas what to do next? I'm stuck.

hey. Just received my Ulefone Power today as well.
Tried various TWRP for the Power from here: http://www.needrom.com/category/ulefone/power-ulefone/
but neither did work.
Since i don't own a windows machine i also tried to simply boot the recovery via fast boot but i get the same error message.
Hope someone is willing to help us
EDIT:
from the scatter file: - partition_index: SYS9
partition_name: recovery
file_name: recovery.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x2d80000
physical_start_addr: 0x2d80000
partition_size: 0x1000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00
so maybe
Code:
fastboot -b 0x2d80000 boot recovery.img
? Will try later in the evening
Cheers

nope... i just hope i don't need all the windows madness to do it...

I managed to finally flash TWRP. I solved it by... using different image...
Please note that I used 4 images before finally 5th worked, so it wasn't such an obvious solution.
I couldn't find the link in my history but after some googling I think this was the image I used:
aplush.xyz/2016/05/ulefone-power-twrp-3-download.html
Please try this one and if it doesn't work, try another one from Aplush (I'm sure that I downloaded it from Aplush).
Good luck!

was successful as well last night using this recovery:
http://www.needrom.com/download/twrp-3-0-0-5/comment-page-3/#comment-273477
however i could not fastboot boot it, so i dived into the cold and flashed it hoping for the best

mrjigsaw said:
I have also tried to root my phone with apps KingRoot and KingoRoot to install something like Flashify and flash recovery from ROM. But these apps failed to root my phone.
And finally, I've tried booting the recovery from fastboot with:
Code:
fastboot boot recovery.img
...but I got the following error:
Code:
C:\Users\mrjigsaw\Desktop\Smartphone\ulefone Power_Android 6.0_20160517>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.799s]
booting...
FAILED (remote: invalid kernel address: not lie in memory)
finished. total time: 0.820s
Fortunately this error appears on whole 2 pages in Google...
Any ideas what to do next? I'm stuck.
Click to expand...
Click to collapse
did you get it fixed?

Baseband not found / Device is locked. status code: 0

AP Fastboot Flash Mode (Secure)
BL: 80.CB (sha-cfa8344, 2015-11-20 18:51:42)
Baseband: <not found>
Product/Variant: osprey XT1550 16GB P2B
Serial Number: ZY222VMSZ5
CPU: MSM8916
eMMC: 16GB Samsung RV=07 PV=06 TY=57
DRAM: 2048MB Samsung S8 SDRAM DIE=8Gb
Console [NULL]: null
Battery OK
Device is locked. status code:0
Software status: modified
i don't know how to fix it, i'm dying with it. any suggestion for it.....

You can't boot? And if you can it's an common bug on the bootloader and it doesn't seem to affect the device.

In my device it occurs when I have no SIM inserted.