UAG - Note 7 + Samsung Screen Protector = Lifted top/bottom edges - Note 7 Accessories

Yes...as the title implies, the UAG case and the Samsung screen protector coupled together was not a good fit.
I've settled on the UAG case. Now I need to find a screen protector.
Anyone have a UAG + screen protector success story?
The Samsung Screen Protector worked well with the standard Samsung Galaxy Note7 Case S-View Standing Flip Cover - Black. But the case didn't really feel like it was protecting anything. Plus it was a pain to hold. Blah...

Been going without a screen protector. Screen still looks pristine.
Sent from my SM-N930T using Tapatalk

Bodyguardz screen protector works with Uag case. Some have said the edges start to peel, but might be due to not being lined perfectly.

UAG cases coming with one hole on top instead of two. Looks better this way.

the one i got has 2 holes on top.
borijess said:
UAG cases coming with one hole on top instead of two. Looks better this way.
Click to expand...
Click to collapse
what color you have.?
my ICE.
dont really like the extra hole on top. returning it.
love the case thought. would get it again if i know which version has just 1.

I hang the ice. I also have the ash. The ice has one hole and the ash has two. I think they might of updated there cases.

Galaxy Note 7 Screen Protector (2-Pack), ILLUMI AquaShield (Case Friendly) Full Coverage Screen Protector for Galaxy Note 7 HD Clear Anti-Bubble Film
I have the UAG case and this screen protector from Amazon and it has worked the best. I've tried a lot. As long a you center the screen protector evenly when you apply it and maybe wait over night before you put the UAG case back on.

hotspace said:
Yes...as the title implies, the UAG case and the Samsung screen protector coupled together was not a good fit.
I've settled on the UAG case. Now I need to find a screen protector.
Anyone have a UAG + screen protector success story?
The Samsung Screen Protector worked well with the standard Samsung Galaxy Note7 Case S-View Standing Flip Cover - Black. But the case didn't really feel like it was protecting anything. Plus it was a pain to hold. Blah...
Click to expand...
Click to collapse
I have had success with this problem with my s6 edge plus
I took a razor knife and skimmed the sides of case were it was lifting screen protector and it solved this problem

Galaxy Note 7 Screen Protector, Yootech [Updated Design][Anti-Lifting] Full Coverage Wet Applied Screen Protector for Samsung Galaxy Note 7 HD Clear Film+samsung clear case. Perfect. Dont worry about top, bottom,right or left touched by the edge of the case

Related

Case + Screen

I currently have Seido Innocase 2 and I just put on a clarviue screen protector. The case lifts up screen protector, are there any good screen protectors + the case that doesnt do this?
Thanks
Best case at www.case-mate.com. I use the tough case and it's on sale last time I checked.
For screen, l use the anti glare screen protector from www.boxwave.com
I heard that the tough cases attract dust like crazy though..
Also black & black out of stock
Case-mate Barely there + Clarivue Screen protector here. I don't use the case all the time, but when I do - no problems with the screen protector.
xxsashixx said:
I currently have Seido Innocase 2 and I just put on a clarviue screen protector. The case lifts up screen protector, are there any good screen protectors + the case that doesnt do this?
Thanks
Click to expand...
Click to collapse
I have the innocase 2 for my nexus one. With any screen protector that you use with the innocase 2 you are going to run into problems. I have tried a few different screen protectors from different manufacturers and i always run into the same problem, the case ends up lifting up the screen protector or if i do end up getting the case on without the screen protector lifting up, a bubble will form at one of the edges. the innocase 2 is such a tight fit, it's just a problem with the screen protectors.
i do like my innocase 2 and from all the marks it has, it has protected my nexus well for which my nexus has not one scratch and looks brand new. i have just learned to deal with the problem of the innocase 2 and screen protector.
xxsashixx said:
I heard that the tough cases attract dust like crazy though..
Also black & black out of stock
Click to expand...
Click to collapse
i have one and i've been using it for a week, don't have a dust problem...and what i did to get black and black; order the shell and the silicone separately...they ship at the same time and it still comes in one box with a free screen protector
xxsashixx said:
I heard that the tough cases attract dust like crazy though..
Also black & black out of stock
Click to expand...
Click to collapse
The black n black combo- i.e black toughcase set is out of stock but u can buy the hard cover and gel cover both in black separately and it costs the same as the case itself- i jus ordered mine a few days back but since i'm not in US i've to wait for 3-4 weeks
eagerly waiting tho!
I've had a Tough Case since May and it's not a dust magnet.
I recently got a case from Incipio for my Nexus One and I love it. It fits perfectly and it feels very durable. The case itself is made of two parts - a silicone "glove" that goes on first, and a plastic one that goes on the outside. It feels very sturdy and hardy.
I'm also using a Clarivue screen protector (anti-glare one), and the case doesn't disturb it at all.
I can't post a link since I'm a newbie (I love the case so much that I'm coming out from under my rock and making this reply ), but you can search for "Incipio Google Nexus One SILICRYLIC Hard Shell Case with Silicone Core."
Hope this helps!

What Plastic Screen Protectors are you using on the Note 4?

What Plastic Screen Protectors are you using on the Note 4? I'm under the notion that typical PET film is compatible with most cases.
I got the Zagg HDX screen protector and I'm pretty happy with it. I was hoping for tempered glass, but I don't think that's going to happen any time soon. The HDX protector was easy to install and it feels great. No issues with s-pen making divots or marks so far (been about a week of use).
INITIALLY... like immediately after you put it on, it feels a bit "sticky" when you run a finger over it. Just clean it off though and it's fine. Must be some residual "sticktion" from the films that cover the film prior to install.
+1 for the Zagg HDX. It's more expensive, but well worth it. The glass protectors look funky on this phone, and you can barely tell the Zagg is on there except for the somewhat sharp edge. I usually go without a protector, but the Note 4 is VERY scratchable... I had several light scratches in the coating that could only be seen in the right light only after a few days of use, so I had to get the protector.
I can rest-assure you its very hard not to get even the tiniest scratch on the shiny metal portions of the Note 4 especially the first time you put the phone in a case. When buying new, the device jostles while in transit, and I've seen scratches in areas where no one will see; that's just me.
Is the HDX as thin as one of those cheap plastic screen protectors found on eBay?
The HDX is a little thicker than the cheap ones. It's a multi-layer construction and provides impact resistance. It's still thin and flexible enough that it handles the slight curve at the edge of the screen and doesn't halo or anything. AND... I'm using the Samsung case and it works with that perfectly.
I'm currently using the iCarez film protector and it does not fit with my Seidio Surface case because it's too thick. Has a bubble in the lower left corner I can't get rid of and when I put the phone in my Akron Mega Grip car mount the side arms cause a large bubble on the left side. Not sure how thick it is but hoping for better results with the Zagg HDX which is 1 mm thick. Also don't like S Pen feel with the iCarez film.
I've been using Spigen Steinheil screen protectors since I first got a Motorola OG Driod. The Steinheil have always been durable and protective of my screens. I have a Spigen Steinheil Crystal screen protector on my Note 4. It works well and doesn't interfere with the native screen. They come 3 in a pack.
Zagg hdx until my iloome shows up
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Thanks, moderators please close this thread or merge if applicable.
eksoccer99 said:
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Click to expand...
Click to collapse
TechMatte screen protectors are the best quality, and best value!
http://www.amazon.com/gp/aw/d/B00MX...SY200_QL40&dpPl=1&dpID=510dhI4oDpL&ref=plSrch

Finally found a full glass screen protector

Ordered this off eBay and its great. Covers the whole glass on the phone and does NOT have the halo effect around the glass but only near the home button which isn't much. The borders are black to possibly hide the halo, and or parts of the glass that isn't touching the screen itself. Pictures were taken on a Nexus 5 so you know where I'm getting at.
http://www.ebay.com/itm/23154906205...49&var=530790694087&ssPageName=STRK:MEBIDX:IT
Here are the pictures. I'll post the eBay link in just a bit.
Is that the Araree brand one?
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
droidhd said:
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
Click to expand...
Click to collapse
Just added the link. This one doesn't seem to have a brand but they may all come from the same factory with different branding.
hii .. how does the phone fit in a case ? does the edges of the screen protector get pushed by the case ?
Is that really full cover? edge cover?
It does cover edges but i would like to see one on gold s6. Also to OP, how is around home button now?
The glass covers the entire front of the phone. The camera, proximity sensor and wraps around the home button. I haven't tested it with other cases besides the ringke slim case and it is just fine. I'm guessing it should be fine with others as well. There is no portion of the front glass exposed with this on except for this home button and the ear speaker.
Sent from my SM-G920T using Tapatalk
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
corb06 said:
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
Click to expand...
Click to collapse
Yes, all the way to the edge. It has a black border around the edges so if there is any halo effect, you cannot see it. I've tested it with both the Ringke Fusion and Slim case and it's not pushing the screen protector up. I imagine some cases may lift the protector.
Thanks, just ordered one.
Nillkin has an even cooler tempered glass protector, look here:
Definitely going to check this out in black
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=1&cid=1&scid=33&id=5045&page=1
http://www.nillkin.com/uploads//2015040719354873499.jpg
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Great just what i was looking for!
Thanks for sharing OP
asdfvtn said:
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Click to expand...
Click to collapse
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Blooody marvellous!!
Cameron_S said:
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Click to expand...
Click to collapse
My guess as well. It does wrap all around the phone and the glass is edge to edge unlike others. It may lift with other protectors who have a lip around the screen. Its a great protector and wanted to share with everyone here since we are all looking for one that covers the whole front glass and this is it.
Sent from my SM-G920T using Tapatalk

[Q]

I'm looking for a case and tempered glass screen protector for my regular Black S6.
The problem I have is most of the tempered glass screen protectors dont go from edge to edge of the screen and leave a messy looking rim around the edge. *by edge to edge I don't mean S6 Edge.
I found thiswhich does go from edge to edge and wondered if anyone has any expereince with them?
REMAX Brand Full Tempered Glass Screen Protector For Samsung Galaxy S6
I would like to use them in conjunction with a Spigen Neo Hybrid but wasnt sure if the screen protector would get in the way of the case fitting?
Or does anyone have any other tempered glass screen protector/case combo that workds really well? I quite like the Spigen because it has a nice slim form factor and similar metal rig to the naked phone, but am open to suggestions.
unclebob123 said:
I'm looking for a case and tempered glass screen protector for my regular Black S6.
The problem I have is most of the tempered glass screen protectors dont go from edge to edge of the screen and leave a messy looking rim around the edge. *by edge to edge I don't mean S6 Edge.
I found thiswhich does go from edge to edge and wondered if anyone has any expereince with them?
REMAX Brand Full Tempered Glass Screen Protector For Samsung Galaxy S6
I would like to use them in conjunction with a Spigen Neo Hybrid but wasnt sure if the screen protector would get in the way of the case fitting?
Or does anyone have any other tempered glass screen protector/case combo that workds really well? I quite like the Spigen because it has a nice slim form factor and similar metal rig to the naked phone, but am open to suggestions.
Click to expand...
Click to collapse
Well, I have this case from Spigen
and this tempered glass screen protector from amFilm
They both work very well for me!!
Araree Tempered Glass + Otterbox Commuter.
Otterbox Alpha Glass + Otterbox Commuter.
Because of the added thickness of tempered glass versus PET film protectors you're not going to find one that really goes edge to edge. There is a slight curve at the edges of the screen on even the regular S6. +1 for the amFilm tempered glass. I got mine a few weeks ago when I got my S6 and it hasn't interfered with any cases, there is a tiny halo on the right side, but that is due to me not PERFECTLY placing the protector on. However, it isn't enough for me to need to get a new one/try to redo it. It also feels great and goes a good job of not picking up fingerprints. If my hands are greasy/oily a quick wipe has it looking perfect again. Just my 2 cents...
Sent from my SM-G920V using Tapatalk
Otterbox Commuter + Verizon tempered glass here. No issues at all. I rather like the Verizon glass too.

Post your combination - screen protector and case combos that work

Can everyone post their screen protector and case combination that works (no peeling edges). A few combinations were mentioned in individual posts but it would be good to have them listed together. Post away!
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
How about a protector with either a Samsung S-view or Spigen S-view case?
Thank you for this thread. Was about to create a similar one.
I have a Note 7 on pre-order and want to ensure a screen protector + case is with me before it arrives. Have spent a few hours going through various threads looking a for good combo that works without the screen protector peeling from the edges.
Ideally, would like to buy a tempered glass protector and a clear case. Any suggestions, please?
Also, does the official Samsung clear case and screen protector work well together? If tempered glass is a no-go, that would be my fallback option till something better comes along.
I have the Spigen Ultra Hybrid and now thinking of ordering this https://www.amazon.co.uk/gp/product..._act_image_4?ie=UTF8&psc=1&smid=A7ZMMLW05YAY7
adhesive on top and bottom no on edges and it's size is case friendly. Still waiting for the UAG Cobalt
Good call on this topic!
Zagg
Justinphxaz said:
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
Click to expand...
Click to collapse
I went to the Zagg kiosk at the mall and they had made the Zagg Clear HD case friendly and I am currently using a Caseology Parallax with no issues. The screen protector is a good one!
kontithegreek said:
I went to the Zagg kiosk at the mall and they had made the Zagg Clear HD case friendly and I am currently using a Caseology Parallax with no issues. The screen protector is a good one!
Click to expand...
Click to collapse
Nice! So no edges of the screen protector are peeling up from the edges? My wife's got that one case too and her Skinomi Techskin screen protector is doing well, the protector is still on pretty well but there is a very slight peel on one edge but it's slight and sits back down for a few days if you push it back down. My Spigen Neo Hybrid case doesn't play well with my Skinomi Techskin screen protector. I've gotta find another screen protector that'll work.
Justinphxaz said:
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
Click to expand...
Click to collapse
I have a JETech tempered successfully paired with my Parralax.
JawjaBill said:
I have a JETech tempered successfully paired with my Parralax.
Click to expand...
Click to collapse
Sweet! I'll have to take a look at that protector!
Justinphxaz said:
Nice! So no edges of the screen protector are peeling up from the edges? My wife's got that one case too and her Skinomi Techskin screen protector is doing well, the protector is still on pretty well but there is a very slight peel on one edge but it's slight and sits back down for a few days if you push it back down. My Spigen Neo Hybrid case doesn't play well with my Skinomi Techskin screen protector. I've gotta find another screen protector that'll work.
Click to expand...
Click to collapse
Yeah so far I have no problems I switch between the parallax case and the spigen rugged armor and everything has been good. Zagg has always been a favorite of mine on all my phones and they will only set you back like 25.00.
Hope this helps!
Verizon tempered screen protector and Samsung brand LED case.
I have the JETech from amazon uk with Spigen neo hybrid crystal. Works perfectly have checked with multi touch test app and there is no problem with touch sensitivity anywhere. No sign of any halo or other video. problem.
Easy install just have to line up with touch key lights.
I'm using icarez screen film with choetech ultra thin hybrid case and it doesn't peel off the icarez since the bumper goes over a protector a bit and holds it down. Also got another thin tpu Myriann that works with it the same way. Tried spigen ultra hybrid and it sometimes will peel it off very slightly but a few adjustments and it's good again. With the ringke fusion hybrid case forget it. Peel galore!
icarez
https://www.amazon.com/gp/your-acco...5027466&returnSummaryId=&shipmentId=DnCYPJLLH
Choetech ultra thin hybrid
https://www.amazon.com/gp/your-acco...3825810&returnSummaryId=&shipmentId=D32VdG0wH
Myriann thin tpu
https://www.amazon.com/gp/your-acco...1067442&returnSummaryId=&shipmentId=DrfpbHW1H
Sent from my SM-N930T using Tapatalk
This combo worked perfectly for me....
Galaxy Note 7 Case, POETIC Affinity Series Premium Thin/No Bulk/Clear/Dual material Protective Bumper Case for Samsung Galaxy Note 7 (2016) Black/Clear
https://www.amazon.com/Affinity-Pre...&qid=1472782554&sr=8-1&keywords=poetic+note+7
and
Official Samsung Galaxy Note 7 Screen Protector - Twin Pack
http://www.mobilefun.com/60374-official-samsung-galaxy-note-7-screen-protector-twin-pack.htm
No lifting of those Samsung screen protector on sides nor top and bottom on that Poetic case. I tried it on a SUPCASE Unicorn Beetle and they did lift up, so had to return that case.
MKchrias said:
I have the JETech from amazon uk with Spigen neo hybrid crystal. Works perfectly have checked with multi touch test app and there is no problem with touch sensitivity anywhere. No sign of any halo or other video. problem.
Easy install just have to line up with touch key lights.
Click to expand...
Click to collapse
Adheres the glass over the whole area? Or only the top and bottom from the jtech glass?
The Samsung oem clear case is working very well. Comfortable and feel solid. Better than the s6 s view case that I had that broke easily.
I will prefer a tempered glass but unfortunately none is good. Currently using oem Samsung SP. Affordable. Fit well at the edge. But can see lines over it after scratch and using s pen. But that's the purpose to protect the screen right

Categories

Resources