Database Info

[Q] I can't root my phone with ANY TOOLs..

First, this problem is not common question..
My phone is TAKE(EV-S100), I think there's no one who has this phone if there is no Korean who is reading this thread..(?)
I could root my phone when it was froyo, but when I upgraded my phone to gingerbread(2.3.4), it doesn't root with any tools.
I tried SuperOneClick all versions, zergRush, update.zip and boot.img.
Result is:
SuperOneClick : Step #7 : waiting for device
with adb.exe of phones upgrade folder : Step #7, but not responding..
zergRush : There's no progress after *daemon started successfully*
update.zip : There's no information for my phone but I tried droid's root-update.zip, but eocd error and signature error.
boot.img : when I enter bootloader mode (I could do adb reboot bootloader), then the driver what named 'kroid' but not installed, can't find driver.. so when I enter "fastboot boot boot.img", prompt says "waiting for device"
If someone can resolve this problem, please answer..
I believe my phone can be rooted someday..
Please understand if I wrote wrong grammer.
I'm not American and I studying English but I'm clumsy English yet..(?)

Same problem to me any one can us.............
Thanks ..................
Masud-GSM

This might help
Masud-GSM said:
Same problem to me any one can us.............
Thanks ..................
Masud-GSM
Click to expand...
Click to collapse
After reading through some of the development forums I found that I did not have my phone in internet connection mode with the usb attached. It needs to be on this mode in order to run anything. If you have that running not sure what else it might be. I have been able to troubleshoot alot by looking through the devo forums for my phone.

How to root LG L50 Sporty (a.k.a LG D213c)

So this is my first post on XDA, due to the lack of information on this particular device. Here I'll try to explain how I managed to root this device after trying several methods available here and all over the web. First I'll explain what didn't work:
VROOT (*)
Framaroot
Motochopper
SRS Root
MTK Toolkit
Nearly every solution on the web
After trying every method above, I noticed none of them were working. They all were giving false positives. No ROOT at all. I was kinda frustrated, 'cause I had followed every instruction possible, without success. I double checked my PC drivers, and I noticed something odd: Every time I changed the USB connection type on the L50, Windows installed different drivers for the device. I'm saying this was odd because I installed the drivers from LG drivers pack, so I was a bit confused. So, after Windows Installed the drivers for MTP, Modem, PTP and LG mode, I tried VROOT and... VOILÁ! I had ROOT:laugh::laugh:
So here are the steps I followed, and the tools I used:
Download VROOT (a.k.a. as IRoot) from w w w. mgyun. c o m / en / getvroot (without spaces)
Enable DEBUG MODE (Surf the web if you don't know on how to do it).
Plug your device to your PC and wait until Windows Installs the drivers for the connection type.
Without unplugging the device, Change the USB connection type to the next one. Wait 'till windows finishes installation.
Repeat the previous step untill you finish with all connection types.
Check Device Manager for missing drivers. If you have some missing, repeat steps above.
Open VROOT/IROOT and plug your device to the PC. Follow on-screen instructions and wait.
ENJOY!
Now, I have to find a Custom Recovery that works with L50... so if you guys know where I can get one, I'll appreciate your help.

Your Thread will be moved to appropriate Section.

So I tried to make a recovery for this phone, but it cannot boot. It says boot certification error, and the phone reboots normally.
So is it possible that the bootloader is locked? I want recovery for this phone too.

someone know how i can do a nandroid backup on LG L50 ?

Thank you so much. Worked on D213AR
Can you confirm if there is a way to unlock NFC hidden option on my phone?

jam66 said:
someone know how i can do a nandroid backup on LG L50 ?
Click to expand...
Click to collapse
If you managed to get Root (with the steps described on the OP) You can use Titanium Backup.

THE Ghost2 said:
So I tried to make a recovery for this phone, but it cannot boot. It says boot certification error, and the phone reboots normally.
So is it possible that the bootloader is locked? I want recovery for this phone too.
Click to expand...
Click to collapse
same for me i made cwm for it cant boot to it because it has locked boot loader

So is it possible to root the phone with the official rom?
Or am i missing something?

[Q] How to Root stock LG G2 d80130a running Lollipop 5.0.2

*Solution - So my issue was that the person who sold me the phone had screwed up the partitions/download mode and so I had to manually push the bootloader laf.img files using fastboot from my pc while my phone is connected via usb.
I used parts from this tutorial that I found on th web: [unable to post due to insf. posts - google "FIX DEAD LG G2 - Unbrick / Fix Fastboot Mode - EASY METHOD" it's the first youtube video]
and here is the original site I found that lead me to my eureka moment: [unable to post due to insf. posts - google "lg g2 fast boot menu fix" it's the first link with the word "yakuza" in it]
Appreciate both of these individuals for providing the info, I'm now running CloudyG3 2.2 and loving it
--------------------------------------------------------------------------------------------------------------
As the title implies I'm trying to root my g2 d80130a which is already on lollipop 5.0.2.
I've tried the LG Single click root method and it fails on 75% (putting the phone in download mode) every time. I've tried updating drivers and restarting phone and pc but no luck. Always fails at 75% with my phone in download mode waiting for adb input.
Root Genius also fails saying "Your phone is so solid to root".. .assuming it means to say it's "to" solid to root but go figure .
I've heard of a mythical "Manural root method" but can't seem to find steps anywhere.
*I'm beginning to understand that the manual method is just doing all the steps manually that a particular script is automating for you. In attempting this, seaerching for the COM port in download mode seems to be the hiccup I'm not seeing a port when running the ports adb command. For now i'll start from there...
Been searching all day and looking for some direction, any help is truly appreciated.
Thanks,
Astro

ADB finds a port just fine when booted up in stock Lollipop but it fails to find a port in fastboot booted into download mode.

OPPO Joy 3 Unbricking Tutorial [Windows Computer is Needed]

Have you just started flashing ROMS on your Oppo Joy 3, Feeling confident that you'll succeed, and then suddenly, after flashing your phone with that new shiny software you found online, your phone refuses to turn on or to mount the system when your in recovery. Well If this is happening to you, then you have just bricked your phone.​
Now before I start the tutorial, make sure that you have these files/tools present on your computer:
SP Flash Tool
Oppo Joy 3 Firmware
MTK Drivers​
Now Lets Begin​
Step 1​Make sure that all files stated are in your computer, if not, download them all​
Step 2​Unpack the Firmware to a place you can easily find it​
Step 3​Remove the Battery, Sim Card, and Memory Card from your phone​
Step 4​Make sure that MTK Drivers are also installed on your computer​
Step 5​Open SP Flash Tools and Select the Scatter file found in the unpacked firmware. File name of scatter file is MT6582_Android_scatter.txt​
Step 6​After successful loading of scatter file, click the Green Download Button and connect your phone to the PC While holding either UP or DOWN volume keys.IF SP FLASH TOOL SAYS THAT THE ROM IS UNRECOGNIZED PROCEED TO STEP 7 IF NOT, TO STEP 8​
Step 7​If SP Flash Tool says the ROM is unrecognized, remove phone from PC, then Click the Format tab in SP Flash Tools and click Start, Connect phone to PC While Holding down Volume UP or DOWN and wait until finished. Repeat Step 7​
Step 8​While SP Flash Tools is downloading the Firmware to your phone, DO NOT REMOVE THE CABLE. Just wait for the download to finish​
Step 0​When SP Finishes Downloading, remove cable and insert battery to the phone, you may now proceed to turn on the phone, It will take awhile for the phone to boot up​
Step 10​Whoa! Step 10 already, after awhile, the phone will go to the lock screen for you to yet once again flash another ROM onto your phone​
FINISHED​IF YOU HAVE ANY PROBLEMS, REPLY TO THIS THREAD OR PM ME​EDIT: I Don't know what you guys mean about password.. There ain't no Passwords I put in

Password Needed
Just downloaded the Oppo Joy 3 Firmware. Unfortunately, the archive is password-protected. Please help.
Edit: I figured it out. Thanks!

What is the password? Pls
Oh haha what a trick

password please
cant extract it....

what is password

i used many method to flash no luck at all......

imend007 said:
Just downloaded the Oppo Joy 3 Firmware. Unfortunately, the archive is password-protected. Please help.
Edit: I figured it out. Thanks!
Click to expand...
Click to collapse
How did you figure it out?

password please

holy molly what is the password??

Question HELP! Stuck in BOOTLOOP [Tecno Spark 5 pro], cant access safe mode or fast boot mode

Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****

vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
Hint: Add Tecno Spark 5 pro (KD7) to this thread's title thus mainly owners of such device get addressed.

can you access fastboot?

no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
ineedroot69 said:
can you access fastboot
Click to expand...
Click to collapse

vanc5 said:
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
Click to expand...
Click to collapse
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress

ineedroot69 said:
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
Click to expand...
Click to collapse
Yeah, i accessed the fastboot to load the patched img file and then fastboot rebooted and it just got stuck in the loop

vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!

ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse

ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revive
Click to expand...
Click to collapse
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process

anger-Fist said:
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
Click to expand...
Click to collapse
The phone doesn't need to be completely off. allow it to bootloop.
Just follow the process in the tutorial linked to and you should
be fine.
by the way am assuming your bootloader is already unlocked.

please send the link to download the auth file good sir

anger-Fist said:
please send the link to download the auth file good sir
Click to expand...
Click to collapse
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide on how it worked for me

i followed the steps to the letter but gives me errors everytime

if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx

ptetteh227 said:
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide onu how it worked for me
Click to expand...
Click to collapse
windows 10
tecno spark 5 pro 4gb ram/ 128gb rom firmware no. KD7-H6211FQRSTU-Q-GL-210520V392

anger-Fist said:
i followed the steps to the letter but gives me errors everytime
Click to expand...
Click to collapse
please send a screenshot of the command prompt after you run the command just In case of any errors (i saw a traceback error in one of the screenshots). you must run the command prompt as administrator

anger-Fist said:
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
Click to expand...
Click to collapse
you don't need one. I didn't use one

ptetteh227 said:
you don't need one. I didn't use one
Click to expand...
Click to collapse
if your tecno spark 5 pro is same as mine(4gb ram/128gb rom) can you send me the link you to download the firmware and da file please

vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work for kd7 tecno
new post

vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work my kd7 twrp recovery and root
new post