Hello,
Recently,I downloaded ROM Manager app from Play Store to flash CWM,as there was no CWM flashable .zip file for my phone. After downloading the CWM and flashing it(for micromax a70),my phone is unable to go in recovery mode....Even my phone does not have downloading mode so I cannot install any other ROM and also I cannot move to stock as there is no software like odin(samsung) for micromax . Please help with this. Your help will be appreciated. Please explain me like I m a 8-year old.:good:
Same problem
i too have same problem with a87 ....
i have formatted all the files in cwm
i have formatted all the files in cwm and now my phone not getting switch on.... not even getting anything on my screen
my phone neither getting into recovery boot nor in flash boot
please help me out,,,
not boot
dinkesh jain said:
i have formatted all the files in cwm and now my phone not getting switch on.... not even getting anything on my screen
my phone neither getting into recovery boot nor in flash boot
please help me out,,,
Click to expand...
Click to collapse
same here... phone stuck... through it...
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Stock Recovery and Boot Files
xuphere said:
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Click to expand...
Click to collapse
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files. http://forum.xda-developers.com/showthread.php?p=44351797
Regards.
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...elopers.com/showthread.php?t=2206421 :cowboy:
Click to expand...
Click to collapse
malick186 said:
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...ry.img after I am done with the scatter file.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xuphere said:
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Click to expand...
Click to collapse
Bro ur best bet is that someone makes a cwm recovery soon or try to flash the stock recovery.img on ur a500... and if someone already has created a cwm recovery would anyone provide me a link to it
malick186 said:
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...it, cant get into recovery mode. Please help.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xedi95 said:
Bro ur best bet is that someone makes a cwm recovery soon or try to flash the stock recovery.img on ur a500... and if someone already has created a cwm recovery would anyone provide me a link to it
Click to expand...
Click to collapse
Bro tried flashing the Stock Recovery.img through Mobile uncle. but no luck. Still the screen gets black and then restarts and boots normally. the thing is now my Sim cards are not being detected.
xuphere said:
Bro tried flashing the Stock Recovery.img through Mobile uncle. but no luck. Still the screen gets black and then restarts and boots normally. the thing is now my Sim cards are not being detected.
Click to expand...
Click to collapse
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
malick186 said:
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
Click to expand...
Click to collapse
Great.. Good to know atleast someone is back in action. Would be great if you could guide me on Flashing the Boot and Stock Recovery. i checked my device status. My Boot Loader is UNKNOWN and Radio has no path.. probabaly that is the reason my Sim cards are not being detected and due to Boot i cant get in my recovery mode.
xuphere said:
Great.. Good to know atleast someone is back in action. Would be great if you could guide me on Flashing the Boot and Stock Recovery. i checked my device status. My Boot Loader is UNKNOWN and Radio has no path.. probabaly that is the reason my Sim cards are not being detected and due to Boot i cant get in my recovery mode.
Click to expand...
Click to collapse
Since i got the backup so i finally decided to mess up with the recovery. Just flashed Noir A20 Recovery on A500 using mobile uncle tool and BANG it doesn't work. All what I am getting is white screen while entering the recovery mode. I tried reverting back to stock recovery.img using Mobile Uncle tools but no vain. Just going to try it twice than will flash it using SP flash tool if it fails! Stay tuned! :highfive:
---------- Post added at 12:00 PM ---------- Previous post was at 11:39 AM ----------
Dude Finally I flashed the stock recovery.img using the sp flash tool. it has become as your. I lost my stock recovery also and Unable to get back, i flashed it usning the Mobile Uncle tools but no vain.... :crying: :crying: :crying:
But still able to boot up normally and both sim working properly!
I think we had to work on our stock recovery.img or we are flashing it in wrong manner. Or there may be a chance I extracted it in wrong way. Searching the XDA Forum for possible answers and waiting for a more senior member to help us in this case!
malick186 said:
Since i got the backup so i finally decided to mess up with the recovery. Just flashed Noir A20 Recovery on A500 using mobile uncle tool and BANG it doesn't work. All what I am getting is white screen while entering the recovery mode. I tried reverting back to stock recovery.img using Mobile Uncle tools but no vain. Just going to try it twice than will flash it using SP flash tool if it fails! Stay tuned! :highfive:
---------- Post added at 12:00 PM ---------- Previous post was at 11:39 AM ----------
Dude Finally I flashed the stock recovery.img using the sp flash tool. it has become as your. I lost my stock recovery also and Unable to get back, i flashed it usning the Mobile Uncle tools but no vain.... :crying: :crying: :crying:
But still able to boot up normally and both sim working properly!
I think we had to work on our stock recovery.img or we are flashing it in wrong manner. Or there may be a chance I extracted it in wrong way. Searching the XDA Forum for possible answers and waiting for a more senior member to help us in this case!
Click to expand...
Click to collapse
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
xuphere said:
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
Click to expand...
Click to collapse
Also downloaded and app called Nandroid Manager to flash my backup, but its doesnt detect any backup file in my device. I have copied the backup ile in both the Internal and the Ext memory, but still no luck.
xuphere said:
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
Click to expand...
Click to collapse
Beware your warranty will be void! last time i mistakenly flashed the Wrong stock ROM on my Noir A5 using the SP flash tool due to which i bricked my device and I was having no option rather than going to service center where they scoldED me and said " WHO HAS GIVEN YOU THE PERMISSION TO MESS UP WITH THE STOCK FIRMWARE OF QMOBILE???" And i replied "DUDE PLZ FIX IT I WON'T DO IT AGAIN"
and they fix it for free but put a huge stamp on my digicom warranty card written WARRANTY VOID :crying:
---------- Post added at 11:53 PM ---------- Previous post was at 11:50 PM ----------
xuphere said:
Also downloaded and app called Nandroid Manager to flash my backup, but its doesnt detect any backup file in my device. I have copied the backup ile in both the Internal and the Ext memory, but still no luck.
Click to expand...
Click to collapse
Havent used such kinda app. The only best thing to create the nandroid backup is by using a CWM/TWRP recovery bcoz it is easy to restore also and helps you unbricked your device if you are soft bricked! :fingers-crossed:
CWM For Qmobile Noir A500
Refer to this thread to fix your problem
http://forum.xda-developers.com/showpost.php?p=44719407&postcount=5
qmobile a500 fix
qmobile is a model of gionee ctrl v4 you can try its rooting and cwm recovery mode it will work okay
Same problem i am facing right now
malick186 said:
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
Click to expand...
Click to collapse
finaly jst bricked my phone ... noir a500
had root but no custom recovery
now stuck on boot logo when ever it starts, else 3e system recovery can b operate able but unfortunately can't b useble ...
i have stock update.zip but installation aborted when try to update from sd card ...
wipe cache / data / factory reset all useless in system recovery ...
i dun have any sort of back up nor nandroid 1's ..
tried to use sp flash tool but then i found m missing aloot of files ..
can u guide me through this ..
how to get stock firmware through system recovery ?
or from where i can complete my files for sp flash tools n how it can detect mobile ?
can a500 b updated by ota update talking about adb sideload ?
please your help will b really appriciable
3rddesie said:
finaly jst bricked my phone ... noir a500
had root but no custom recovery
now stuck on boot logo when ever it starts, else 3e system recovery can b operate able but unfortunately can't b useble ...
i have stock update.zip but installation aborted when try to update from sd card ...
wipe cache / data / factory reset all useless in system recovery ...
i dun have any sort of back up nor nandroid 1's ..
tried to use sp flash tool but then i found m missing aloot of files ..
can u guide me through this ..
how to get stock firmware through system recovery ?
or from where i can complete my files for sp flash tools n how it can detect mobile ?
can a500 b updated by ota update talking about adb sideload ?
please your help will b really appriciable
Click to expand...
Click to collapse
Unfortunately there is no full backup of our Qmobile Noir A500 through MTK Droid Tool. But xda user hamsam has uploaded his nandroid backup which would of great use for you.
1) Download this nandroid backup by hamsam, from this thread: http://forum.xda-developers.com/showthread.php?t=2444089
2) Place the downloaded files in SD card. {Note: Place them in correct folder otherwise CWM wont detect it}
3) Get CWM recovery for A500 and flash it through SP flash tool.
3) Boot into recovery and restore the backup you dowloaded.
4) Reboot. :victory:
Now if you want you can backup your ROM through MTK Droid Tools for the safe side or always kept the nandroid backup in your SDcard and PC aswell.
unbricked but lost imei+network both sim
malick186 said:
Unfortunately there is no full backup of our Qmobile Noir A500 through MTK Droid Tool. But xda user hamsam has uploaded his nandroid backup which would of great use for you.
1) Download this nandroid backup by hamsam, from this thread: http://forum.xda-developers.com/showthread.php?t=2444089
2) Place the downloaded files in SD card. {Note: Place them in correct folder otherwise CWM wont detect it}
3) Get CWM recovery for A500 and flash it through SP flash tool.
3) Boot into recovery and restore the backup you dowloaded.
4) Reboot. :victory:
Now if you want you can backup your ROM through MTK Droid Tools for the safe side or always kept the nandroid backup in your SDcard and PC aswell.
Click to expand...
Click to collapse
sp tool helped me work it out jst unbricked noir a500 ..
flashed the cwm recovery img file of a500 through sp flash tool
it worked n i got cwm working recovery in a500 yet not booted normaly ..
then placed the update.zip n it goes well ..
back on stock version with root access ..
now the problem is i lost imei of both network .
i tried to restore stock nandroid but md5 mis match also made own checksum md5 but no luck ..
now stuck on lost imei ..
help needed .... ???
3rddesie said:
sp tool helped me work it out jst unbricked noir a500 ..
flashed the cwm recovery img file of a500 through sp flash tool
it worked n i got cwm working recovery in a500 yet not booted normaly ..
then placed the update.zip n it goes well ..
back on stock version with root access ..
now the problem is i lost imei of both network .
i tried to restore stock nandroid but md5 mis match also made own checksum md5 but no luck ..
now stuck on lost imei ..
help needed .... ???
Click to expand...
Click to collapse
Consider the following options:
1) Try to flash stock boot.img through SP flash tool.
2) If still problem remains then try to write original IMEI using MTK Droid Tool
I never used these method but i think it should work for you. :angel:
From where else i can get other files of a500 like ebr1, uboot, preloader etc
malick186 said:
Consider the following options:
1) Try to flash stock boot.img through SP flash tool.
2) If still problem remains then try to write original IMEI using MTK Droid Tool
I never used these method but i think it should work for you. :angel:
Click to expand...
Click to collapse
From where else i can get other files of a500 like ebr1, mbr, uboot, preloader etc
HI FRIEND AM AGAIN HERE WITH NEW UNBRICKING TUTORIAL FOR MICROMAX A35 AND OTHER Spreadtrum DEVICES
REQUIREMENTS :
1.cwm backup
2.cwm
3.boot.img
4.pc
5.mob which is stuck at boot logo and cant be flashed by research download or other tool
6.a rom {if backup doesnt work }
for those who are having stuck at boot logo problem ,
follow these steps
1.flash recovery to boot partiton
Code:
fastboot flash boot recovery.img
2.then press power key you ll boot in cwm
3.now wipe data and dalvik cache
4.place the backup in clockworkmod/backup/(your backup here)
5.now do restore backup .please do advance restore, restore system.img only
6.flash the boot.img to boot again
Code:
fastboot flash boot boot.img
link for backup
http://www.mediafire.com/download/86qssa1vs10doag/jelly+blend+cwm+backup+by+gopinaidu.zip
LINK FOR BOOT.IMG :
https://docs.google.com/file/d/0B8ks3Q1UXCFjZzJITS1MUHczM28/edit
credits
AKASH UJJAINKAR
PLEASE PRESS THANKS BUTTON
Not Working!
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
ijaz_shariff said:
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
Click to expand...
Click to collapse
many users tested it and it worked fine maybe u didnt follow correctly
Thanku so much its really works thnks man !!!
Problems in newly installed rom in micromax a35
I successfully flashed the stock rom in my bricked micromax a35 using the spreadtrum research download tool.
But there are a few problems I m getting. Please help.
1. Bluetooth is able to pair with other devices, but when I try to send or receive files using bluetooth, it doesn't accept.
2. IMEI number is changed for both sims. Will this create any problem?
3. When I try to call or somebody calls me, the dialer crashes and both sims shows no network.
4. Internet is not working.
Plz friends if there is any solution to this problem.
I had downloaded the stock rom files from xdadevelopers.
micromax a35 vibrate problem when switch on the phone
Hi,
My self pratik, i get some problem in my micromax a35.
that is when i try to switch it on it just continuously vibrates, no display on screen nothing just vibration
kindly provide me some solution
thanks
hey same problem here also pls reply any solution for this
mmx a35 stuck at logo
i was trying to install a custom rom but i cliked backup instead recovery it was taking much time so i removed battery now it is stuck at bolt logo . i have tried above method but when reboot again it stuck at bolt logo
Hey there,
I have a Micromax AQ4501, during flashing Custom ROM I think I made some mistake or selected improper ROM so my phone is not getting ON, it just shows the logo and that's it.
No recovery menu or any other option is available now, only fastboot mode is working...
Can u help me to solve this issue and recover my phone...?
Sent from my D2502 using XDA Free mobile app
mmx a35 stuck
While taking backup i removed the battery because it was taking time.....the sim cards were not detected,i thought factory reset would work but my phone is just vibrating again and again and not startingplease help me guys!!!
I accidently flashed dark l(Micromax unite 2 version) custom rom in my Micromax unite 3 q372.It flashed properly but I was unable to start my phone.So I tried to restore my phone by nandroid back up via cwm recovery.It is also showing successfully restored.but when I am trying to reboot my phone ,it is going to recovery mode again.I have tried to wipe cache,data,dalvik cache and again restored nandroid back up.but same thing is happening.after rebooting it is going to recovery mode again.plz plz tell me how to fix this.
raymondbqg said:
I accidently flashed dark l(Micromax unite 2 version) custom rom in my Micromax unite 3 q372.It flashed properly but I was unable to start my phone.So I tried to restore my phone by nandroid back up via cwm recovery.It is also showing successfully restored.but when I am trying to reboot my phone ,it is going to recovery mode again.I have tried to wipe cache,data,dalvik cache and again restored nandroid back up.but same thing is happening.after rebooting it is going to recovery mode again.plz plz tell me how to fix this.
Click to expand...
Click to collapse
i dont have your device, but the solutions for this situation are pretty limited. im kinda suprised putting the correct rom back on didnt fix it.
i believe your best move (maybe only move) would be to flash the factory files back on.
if you dont have them, or dont know how to use them try searching google like this "Micromax unite 3 q372 return to stock" or "Micromax unite 3 q372 stock firmware".
do a factory reset. worked for me
Dude, Unite 2 and Unite 3 has different Mount points. Your device might be in soft brick. Only way to get back is flashing the stock firmware. I think restoring nandroid won't help , still you can try
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery