Screen Protector - Moto Z Force Accessories

Hi. If anyone has any interest in claiming a code to try a Moto Z Force tempered glass screen protector for a $1 go here: http://www.choetech.com/Support-review.html
The protector will be available Sept 12th!! https://www.amazon.com/dp/B01L3E72WU
Thanks.

September 12th is the day the protector should be available.

Applied!

They are available for purchase!!! Only a $1 if you claim the code in the link in OP.

I applied a few days ago, were we supposed to get a conformation email or anything?

rejectedjs said:
I applied a few days ago, were we supposed to get a conformation email or anything?
Click to expand...
Click to collapse
You'll get notified.

So... I got a well packaged delivery today.
It's the Choetech tempered glass screen protector for the Moto Z Force.
I had to shorten this review substantially. You're welcome!
The boxing is awesome, and the 2 pack comes with enough installation accessories for one install.
The protector has approximately a 2mm gap around the edges, I assume to also fit.
The problem is the fit. Glass protectors have to sit on a perfect surface an the Z Forces ScatterShield screen is *not* perfect. I've seen a few and they're all wavy in different areas of the screen. Mine is wavy on the top outside of the camera and flash, and also around the fingerprint scanner. The protector has bubbles there that can't be removed.
On a Z this might be a great buy, but with the imperfections of the ScatterShield it just didn't work for me.

Downloading,I'll show pics later:good:

fr4nk1yn said:
So... I got a well packaged delivery today.
It's the Choetech tempered glass screen protector for the Moto Z Force.
I had to shorten this review substantially. You're welcome!
The boxing is awesome, and the 2 pack comes with enough installation accessories for one install.
The protector has approximately a 2mm gap around the edges, I assume to also fit.
The problem is the fit. Glass protectors have to sit on a perfect surface an the Z Forces ScatterShield screen is *not* perfect. I've seen a few and they're all wavy in different areas of the screen. Mine is wavy on the top outside of the camera and flash, and also around the fingerprint scanner. The protector has bubbles there that can't be removed.
On a Z this might be a great buy, but with the imperfections of the ScatterShield it just didn't work for me.
Click to expand...
Click to collapse
After a couple hours. Mine fully uh... For lack of better word... Adhered down fully and bubbles went away.

droidrev71 said:
Hi. If anyone has any interest in claiming a code to try a Moto Z Force tempered glass screen protector for a $1 go here: http://www.choetech.com/Support-review.html
The protector will be available Sept 12th!! https://www.amazon.com/dp/B01L3E72WU
Thanks.
Click to expand...
Click to collapse
Except for around the scanner mine did too.

fr4nk1yn said:
Except for around the scanner mine did too.
Click to expand...
Click to collapse
My screen protector is just fine. It needed a little extra attention after installation. I had to push down on a couple spots.

Related

Glass Screen Protectors

I figured that there would not be any glass screen protectors made for the Note Edge since it would be too difficult for manufacturers to produce.
However, I'm constantly searching the web in the hopes that some company does produce it. To my surprise, I found the following website(looks to be out of stock), but supposedly they are creating one:
http://www.techarmor.com/tech-armor...earest-screen-protector-retail-packaging.html
Let's help each other out and place any links for other Glass Protectors for the Note Edge that may come along in the future.
I have a feeling any glass screen protectors they make will not cover the edge screen
ebay has some
http://www.ebay.com/itm/Anti-Explosion-Tempered-Glass-Film-Screen-Protector-for-Samsung-Note-Edge-/191413851195?pt=US_Cell_Phone_Screen_Protectors&hash=item2c9127943b
but they only cover the front and not the edge.
i doubt there will be any that will cover the edge anytime soon. Its going to be pretty hard to make it fit just right without a space between the screens.
Plastic protectors would have some give to them so it would bend over.
xile6 said:
ebay has some
http://www.ebay.com/itm/Anti-Explosion-Tempered-Glass-Film-Screen-Protector-for-Samsung-Note-Edge-/191413851195?pt=US_Cell_Phone_Screen_Protectors&hash=item2c9127943b
but they only cover the front and not the edge.
i doubt there will be any that will cover the edge anytime soon. Its going to be pretty hard to make it fit just right without a space between the screens.
Plastic protectors would have some give to them so it would bend over.
Click to expand...
Click to collapse
I agree but hope your wrong with today's technology someone should come up with one , if they do it will be expensive , finger's crossed meanwhile ups just dropped off my Note Edge , the only viable solution I found was a skinomi screen protector that wraps around the curve , unfortunately it cost me 20 buck's to have it 2 day shipped no Prime , go figure screen protector 7$ shipping 20 $ also waiting for my Fosman case from amazon should be here tomorrow , now if I could just get UAG to send me my case sooner then the 25 th , I really don't feel like taking a chance on taking the phone out , without a good screen protector and case .............:good:
Philly Jim said:
I agree but hope your wrong with today's technology someone should come up with one , if they do it will be expensive , finger's crossed meanwhile ups just dropped off my Note Edge , the only viable solution I found was a skinomi screen protector that wraps around the curve , unfortunately it cost me 20 buck's to have it 2 day shipped no Prime , go figure screen protector 7$ shipping 20 $ also waiting for my Fosman case from amazon should be here tomorrow , now if I could just get UAG to send me my case sooner then the 25 th , I really don't feel like taking a chance on taking the phone out , without a good screen protector and case .............:good:
Click to expand...
Click to collapse
Yea I had a fosman case order before I got the edge. It came in the day before I pick it up in store. I paid $4 on ebay.
I had screen protectors but they didn't cover the edge. So had to order some more.
I never had a glass screen protector before, since I always put a protectors on day one. But I must say I like the glass feel or the device. So I kinda hope they make a full glass protector.
xile6 said:
Yea I had a fosman case order before I got the edge. It came in the day before I pick it up in store. I paid $4 on ebay.
I had screen protectors but they didn't cover the edge. So had to order some more.
I never had a glass screen protector before, since I always put a protectors on day one. But I must say I like the glass feel or the device. So I kinda hope they make a full glass protector.
Click to expand...
Click to collapse
Couldn't agree More.......:good:
Philly Jim said:
Couldn't agree More.......:good:
Click to expand...
Click to collapse
Philly, did the skinomi work? I love bestscreensever but they will not be making any. I used them for years and years. My note 3 still have the original from Oct 2013 and still in great shape.
I have not used it yet ,picked up the nexus 6 yesterday been setting that up, plus very busy with work , however I have both skinomi protectors on my desk I'm hoping I have time later today to install, I'll let you know and post a few pictures as soon as I can..
I bought a universal screen protector from zagg and cut it to fit my note edge. The one I bought is bigger than the entire lcd on the phone and the zagg's don't try to stay flat so it wrapped around the edge display nicely.
http://www.amazon.com/gp/aw/d/B00PPSOT9U/ref=mp_s_a_1_4?qid=1418256139&sr=8-4&pi=AC_SX110_SY165_QL70
I wonder how this will fit.. It's only a few bucks, guess I'll give it a shot, assuming it won't cover the edge, not sure how it will fit like that, but I guess we will find out.
What the he'll J currently unavailable......? Lol. Just teasing I'll give it a shot when it's available currently using the skinomi not bad bubble free you can barely tell it's on, but nothing beats glass
I'm thinking of getting a tempered glass protector for the flat screen and get the clear self healing ones everyone here talks about for the edge portion.
Trace the self healing protector with the the glass one and cut the edge part off the self healing one.
Apply the glass protector and then apply the cutout of the edge.
I tried looking for that glass protector on ebay but now it's gone. Anyone know where I can get more?
I too have the skinomi brand and am impressed with it. I also reviewed it on amazon. It fits perfectly and still has the finger print issue I mentioned on amazon. However I have also noticed a lot of screen errors in the form of inadvertent screen presses and zoom in/out while trying to scroll. Since I have had the screen protector since nearly day one I do not know if this is an issue with the phone itself or the barrier/drag of the skinomi material.
I do like the feel though. It is nearly un-noticeable.
macolliejr said:
I too have the skinomi brand and am impressed with it. I also reviewed it on amazon. It fits perfectly and still has the finger print issue I mentioned on amazon. However I have also noticed a lot of screen errors in the form of inadvertent screen presses and zoom in/out while trying to scroll. Since I have had the screen protector since nearly day one I do not know if this is an issue with the phone itself or the barrier/drag of the skinomi material.
I do like the feel though. It is nearly un-noticeable.
Click to expand...
Click to collapse
I haven't had any of those problems. I got my phone day one the 14th then screen protector around the 24th.
Also I don't get any drag on the screen at all all feels like glass
Sent from my SM-N915T
The tech armor glass screen protector "coming soon" status reminds me of the subway just built near my house. when I was in freshman year of college and wife in high school, is when we first saw the "coming soon" sign. That was in 2005. they just finished building it last month and it's still not open for business, lol. That how I feel about this screen protector
I ordered Alien Surface HD front and rear. I'll tell you how good it is.
I wonder if there is an edge to edge screen for this one?
I installed the film on the screen, it fits very well, full size. Great care when installing! I am very satisfied. It remains to be seen how the resistance is.
Instructions must be followed strictly and installation kit helps a lot.
megatooth said:
I ordered Alien Surface HD front and rear. I'll tell you how good it is.
Click to expand...
Click to collapse
Got a link you can share? Thanks.
Here you go: http://aliensurface.ro/produs/samsung-galaxy-note-edge-folie-protectie-alien-surface-hd/
The bad part is that it's only available in Romania.

May I know which tempered glass screen protector I should order ?

May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..
I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600
gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ
I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk
I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Amazon Mr Shield For Huawei Mate 9
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...
Try full covdr
I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk

Amazon tempered glass screen protectors

I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Yes. It's not good.
808phoneaddict said:
I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Click to expand...
Click to collapse
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
tech_head said:
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
Click to expand...
Click to collapse
Which 2 brands have you tried?
808phoneaddict said:
Which 2 brands have you tried?
Click to expand...
Click to collapse
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
tech_head said:
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
Click to expand...
Click to collapse
Thank you for pointing it out. I (and other probably) appreciate the info. Ill definitely spread the word if I find one that works, or doesn't!
I returned these based on the reviews. No phone yet so didnt test myself, but why wait to be even further disappointed
https://www.amazon.com/gp/product/B071XHTLGR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
heyitsrj said:
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
Click to expand...
Click to collapse
If any part of a screen protector doesn't stick then all manner of stuff will get stuck in between. For those w/ colored borders, that's not much of an issue but completely clear ones will eventually show all the dust and stuff on it.
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
benshoes said:
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
Click to expand...
Click to collapse
I don't like the feel of this stuff on the screen. It doesn't feel smooth.
It's 3M Urethane film. I have it on the front of my cars.
Ok don't try this one
Definite halo on this one
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_cp_apa_fHJUzb4M12ED5
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
foodplz said:
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
Click to expand...
Click to collapse
Actually much like the iPhone, it's flat until you get to the edge.
If the current round of protectors was 2mm smaller they would fit.
But for me, it doesn't matter.
I'm returning the phone.
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
gqukyo said:
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
Click to expand...
Click to collapse
Jus wait for the accessories to start coming out. Sounds like essential is open to 3rd parties making cases and screen protectors... So just got to hold on...this is what it sounded like from the reddit AMA
I have a Sopi 3M matte skin on the back and it helps with the grip a little but not by much... definitely helps w/ the fingerprints though... lol since it's matte, there can be visible smudges from time to time depending on how dirty/sweaty your paws are... I did read the AMA and they should've worked w/ case manufacturers long before release. I understand they want to keep it close to their vest until release (as to not tip off the competition) but they didn't ship the phone until much later than they said they would so in that time they could've sent out the outside schematics/dimensions to case manufacturers. No excuse!
The situation is the same for any devices that have curved edges. I'm not sure why companies just don't apply adhesive to the whole screen protector. A solution is using UV glue on a glass screen protector that isn't fully covered with adhesive. I've used the Whitedome on my Galaxy S8+ and it works really well. You should be able to buy the UV glue and UV lamp from Amazon and apply it to any glass screen protector. https://www.youtube.com/watch?v=8KZmF8uQESI

Screen protector - NOT tempered glass but "old school" film

Hello all, I have tried a couple of tempered glass screen protectors; I have also read many many reviews.
It seems that there is no tempered glass protector that would be full screen; fit (most) cases and does not release on the edges for all.
I actually did not mind the screen protector which was installed by 1+ when I got the phone (and I did not like the tempered glass ones I tried).
So I contacted them today asking if I could buy a couple of those. To my biggest disappointment I was advised that although I am not the first one to ask, they do not consider the included screen protector to be a "product" and so they do not sell it even if I wanted a large quantity.
I spent some time researching ebay - but most (nearly all) sellers sell only tempered glass (which I don't want). The few seller that sell films are very expensive ($10+ vs. $1 for the tempered glass). That is also surprising as the cost of the film is much less...
So, my question to you all: who has tried film screen protectors? Where did you get it from and what experience did you have?
Thank you for sharing
I personally use 3MK Flexible glass - its hibrid glass. I use it from years, now on OP6. I think its the best option for any phone
https://folie-ochronne.3mk.pl/pl/p/OnePlus-6-Nietlukace-szklo-hybrydowe-3mk-FlexibleGlass/39482
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just ordered me a set.
Im waiting for my iqshield to be delivered next week. Got some high hopes. Gave up on tgsps as there is none currently i would be happy about. Not even the original one.
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Abaddon said:
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Click to expand...
Click to collapse
Its Door to Door only. For me, they shipped within 2 days.
bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
ajsmsg78 said:
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
Click to expand...
Click to collapse
I don't have one installed at the moment, testing a G-Most TPG. But the fit is pretty precise, need patience to get it even on both sides. It's case friendly.
Z51 said:
Just ordered me a set.
Click to expand...
Click to collapse
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
will do
Might grab some of these and see what they are like https://www.ebay.co.uk/itm/3-X-For-....TR1.TRC0.A0.H0.Xoneplus+6+full+coverage.TRS0
Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Z51 said:
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Click to expand...
Click to collapse
Hmm, thats not good. Is it equally too big each way or is it just difficult to install totally centered, so its big on one side only?
A pic would help for sure.
I finally found regular PET protectors similar to the OEM ones that fit the phone well and are of good quality. I got them from here:
https://www.ebay.com/itm/5X-Ultra-Thin-Tempered-Glass-PET-Soft-HD-Screen-Protector-Film-For-OnePlus-6/163161457336?ssPageName=STRK%3AMEBIDX%3AIT&var=462326426650&_trksid=p2060353.m2749.l2649
The adhesive is pretty sticky on them so they don't lift off but it's hard to get them perfectly bubble free. The way I get these on perfect every time is put rubbing alcohol all over the screen then apply the protector and set it in place exactly centered (it's easy to move because of the alcohol) Then lightly push down on it and very lightly push out some of the alcohol so you don't see any bubbles. Then wait five minutes and peel off the front layer then lightly with a small cloth push out the rest of the bubbles. When the alcohol dries (takes about 10-15 mins) it will adhere perfectly and there will be no residue, bubbles or dust under the protector.
I've got an IQshield on my OP6 http://www.iqshield.com/iq32368-oneplus-6-phone-screen-protector.html
I tried a few TG ones and wasn't happy with any. They either didn't stick properly or had the annoying black border. The IQshield is the best protector I've tried.
The best screen protector is the soft nano TPU protectors they sell at ebay or aliexpress for a buck a piece and these cover the whole screen and can be applied wet with some soap and water.
Aakash_Aaku said:
Does it cover the entire screen or leaves a gap at the edges?
Click to expand...
Click to collapse
I know why you are asking ...Most protectors don't cover the edges well. But this does .
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)
---------- Post added at 06:47 AM ---------- Previous post was at 06:42 AM ----------
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)

Amazing Glass Screen Protector

So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.
Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had
kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!
Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.
I managed to get some hair-like fine scratches. I think your full cover helps a lot
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk
kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?
Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress
Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn
crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?
ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.
My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.
Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.
I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.

Categories

Resources