I just installed an Xtrons PA7746BP head unit in my car. It's a px3 7.1 unit with RAM: 2GB CPU: Quad-core ROM: 16GB RK3188.
I am having issues with the unit locking up when using navigation. I've tried google maps as well as waze. Usually after 10 min of use the unit just locks. Anyone else have similar experience and know of a fix?
Thanks!
miatawnt2b said:
I just installed an Xtrons PA7746BP head unit in my car. It's a px3 7.1 unit with RAM: 2GB CPU: Quad-core ROM: 16GB RK3188.
I am having issues with the unit locking up when using navigation. I've tried google maps as well as waze. Usually after 10 min of use the unit just locks. Anyone else have similar experience and know of a fix?
Thanks!
Click to expand...
Click to collapse
Hi, I removed Waze for the same reason...Instead I'm using Offlinemaps app https://play.google.com/store/apps/details?id=com.navigation.offlinemaps.gps&hl=es Google Maps doesn't work properly neither...you must use a specific version if you don't want your unit freeze (read bout it in the forum) ...I know waze is a great app for speed cameras and traffic controls, I've ended using TomTom safety cameras instead.
I'm wondering if this is a network buffering issue. I have had flaky behavior this evening on streaming audio apps when going through poor cell quality locations.
I am tethering my head unit to my phone. If I run apps (audio streaming or nav) on the phone I don't have issues, but when tethered, audio streaming apps (like Amazon) on the head unit will stop playing mid song saying they can't stream. Same app on the phone running hotspot works fine. Could the network buffering between cellular and wifi be different?
-J
You need to use Google Maps Version 4.46.2. Don't update it.
Has anyone found out what the cause of this is. I am facing a similar problem...
I have a PX5 Xtrons (GS) headunit and whenever i run Waze/Google Maps (9.46.2), after 30+ minutes , i get a "GPS lost, searching for GPS" message and the system starts to lag behind. Changing tracks/radio stations or volume at that time has a big delay. Closing the navigation apps makes everything run smoothly again. I have tried the latest GS stock ROM V2.73 (MTCE), and currently on the latest Malaysk Custom ROM. I've checked system temperature and GPS reception using Android apps and both seemed fine.
It’s a pain I had my unit replaced as it kept crashing and ensured google maps was 2.46.2 on this new one, and it was great for an hour this morning, then I noticed it was still on the A20 when I wasn’t and then it threw up the stopped warning. Restarted google maps and it failed again. Would be seriously annoying on a long trip rather than just trying to avoid traffic on the way to work.
Waze doesn’t work properly at all now. Really like having online maps for the traffic advice.
Beginning to wish if not bought this pos
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Anything at all?
chewybits95 said:
Anything at all?
Click to expand...
Click to collapse
Have you tried returning it, or lodging a dispute with the reseller?
marchnz said:
Have you tried returning it, or lodging a dispute with the reseller?
Click to expand...
Click to collapse
I didn't want to go that route yet until I troubleshoot it myself. Plus, shipping to China is expensive, so that'll be my last ditch solution if I'm not able to figure out these menial issues.
Others here have experienced these problems you should be able to find their threads. From what I've read before the rebooting was linked to the HU losing internet access but those were units with a SIM card port. Setting airplane mode helped when they had no SIM and/or were connected to the phone hotspot. But if there's a problem with a SIM in relocating the antennas was needed otherwise the unit needs repair.
For the HVAC display you need a CANbus decoder specific to your car. It's not unusual for a seller to not include it unless you told them you need it. You have to be very literal and specific with them. One guy received the wrong one and only fixed it by convincing another seller (Dasaita) to sell him one. In your case it worked before and no more after the update then you may need to try different settings in the CANbus menu. Did you get your update from Seicane? If not you should ask them for one.
nic2k said:
...
For the HVAC display you need a CANbus decoder specific to your car. It's not unusual for a seller to not include it unless you told them you need it. You have to be very literal and specific with them. One guy received the wrong one and only fixed it by convincing another seller (Dasaita) to sell him one. In your case it worked before and no more after the update then you may need to try different settings in the CANbus menu. Did you get your update from Seicane? If not you should ask them for one.
Click to expand...
Click to collapse
I don't think this is the case here. I have the same unit as OP.
Check this thread regarding the Climate Control display issue: https://forum.xda-developers.com/an...1-android-8-2003-accord-t3923783/post79786553
brettf said:
I don't think this is the case here. I have the same unit as OP.
Check this thread regarding the Climate Control display issue: https://forum.xda-developers.com/an...1-android-8-2003-accord-t3923783/post79786553
Click to expand...
Click to collapse
How would I go about actually changing the wires around though? Do I just pull them out of the harness? Lol, I'm not an electrician, so I would prefer not to break the unit.
I may have figured out the rebooting issue: when I went back to finally check the back of the unit, I found the power cable with the blue harness wasn't completely connected to the unit. Whoops, lol!
I'll test it out whenever I drive my accord again and see if this definitely fixed the rebooting issue.
chewybits95 said:
How would I go about actually changing the wires around though? Do I just pull them out of the harness? Lol, I'm not an electrician, so I would prefer not to break the unit.
Click to expand...
Click to collapse
Just pop them out of the connector. There's a little tab on the metal bit inside the connector. If you press it and pull the wire softly, it will pop out.
brettf said:
Just pop them out of the connector. There's a little tab on the metal bit inside the connector. If you press it and pull the wire softly, it will pop out.
Click to expand...
Click to collapse
I was able to pop them out like you mentioned, but no changes. Luckily the a/c still works, so I guess I'll just leave it as is for now... Thank you for the guidance.
Follow up- so I was able to diagnose and fix the majority of the issues I listed thanks to you guys.
In terms of the steering wheel controls, Seicane's engineers failed to switch the steering wheel control settings in the factory settings to "SWC keys" before shipping it out. I found this setting only after attempting to install a universal SWC remote myself, so now I was able to retain both my original controls and the newly installed remote, which is a nice addition now. If you guys ever have issues with the car's original SWC settings when installing your unit, check your settings by going to:
CAR (Driving, navigation some settings) -> Factory Settings (passcode 126) -> Other -> Steering wheel keys assign -> ***Switch to SWC Keys if it's set to Can key***
Note- I'm not sure if the settings will differ per android software, but my unit is Android 9.0
chewybits95 said:
I was able to pop them out like you mentioned, but no changes. Luckily the a/c still works, so I guess I'll just leave it as is for now... Thank you for the guidance.
Click to expand...
Click to collapse
You should also make sure your car profile is "116 Accord 7" under factory settings - canbus
chewybits95 said:
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Click to expand...
Click to collapse
Glad I could help!
chewybits95 said:
Follow up- so I was able to diagnose and fix the majority of the issues I listed thanks to you guys.
In terms of the steering wheel controls, Seicane's engineers failed to switch the steering wheel control settings in the factory settings to "SWC keys" before shipping it out. I found this setting only after attempting to install a universal SWC remote myself, so now I was able to retain both my original controls and the newly installed remote, which is a nice addition now. If you guys ever have issues with the car's original SWC settings when installing your unit, check your settings by going to:
CAR (Driving, navigation some settings) -> Factory Settings (passcode 126) -> Other -> Steering wheel keys assign -> ***Switch to SWC Keys if it's set to Can key***
Note- I'm not sure if the settings will differ per android software, but my unit is Android 9.0
Click to expand...
Click to collapse
IF i switch to SWC Key, i cant assign the keys anymore
Solutions?
EGOiST1991 said:
IF i switch to SWC Key, i cant assign the keys anymore
Solutions?
Click to expand...
Click to collapse
Switch it back to Can Key and see if it you assign the key configurations.
SWC worked before I figured out the two CANBUS wires needed to be switched around but I don't feel the need to test if this will work in my car, so see if that may help.
Sent from my LM-V350 using Tapatalk
CanBus works fine. Every Function works on the 78 Protokoll. Only the Steering Wheel buttons get a "double Input" but i only press once.
And if i switch to protokoll 46 the Steering Wheel Button works perfect but everything else from canbus does not work (Settings for the car)
chewybits95 said:
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Click to expand...
Click to collapse
The chassis was touching bare wires for random **** I didn't have so it kept resetting. Took me an hour to figure it out. You don't need to spend money just get some tape and make sure all the wires are connected or covered
Ahardyg93 said:
The chassis was touching bare wires for random **** I didn't have so it kept resetting. Took me an hour to figure it out. You don't need to spend money just get some tape and make sure all the wires are connected or covered
Click to expand...
Click to collapse
Lol 420 tho I was smoking too
hello friends, I was wondering if you can help me, my CANbus looks like its working and the steering wheel works too, however, the stereo reboots every 3-4 minutes... the thing is that if I connect something it gets frozen, and a couple of seconds it reboots, if I open an app it gets frozen, if I click on any button of the stereo it will work one or three times but then it gets frozen and reboots it again, I'm not able to listen to anything because the stereo reboots all the time many times... I tried with android 9 same error I updated to android 10 still the error, please can you help me with some ideas, I really believe it is a hardware issue and not software. regards
It seems that Android Auto (including wireless via Motorola M1) works flawlessly for a few days after setting it up.
Once it enters the "looking for Android Auto" mode there's no other way than removing cache and app settings and establishing the phone -car connection from scratch. And after doing so, it will work for a few days until it starts looking and not connecting again.
Is this a known issue? Is this specific to the wireless adapter? Once the error occurs, wired connection doesn't help.
I also have the AAWireless device somewhere and I'll have a look.
Check the Android Auto forums, maybe some info there...
Android Auto General
General discussion about Google's Android Auto.
forum.xda-developers.com
My wife and I have been using wireless (and wired) Android Auto in our car with the P7P for three weeks with no issues like this. Our car's head unit doesn't have native wireless AA, though - we're using AAWireless. Could be just the head unit or the car needs a firmware update (my car has occasionally received one when I have it connected to my home's Wi-Fi).
roirraW edor ehT said:
My wife and I have been using wireless (and wired) Android Auto in our car with the P7P for three weeks with no issues like this. Our car's head unit doesn't have native wireless AA, though - we're using AAWireless. Could be just the head unit or the car needs a firmware update (my car has occasionally received one when I have it connected to my home's Wi-Fi).
Click to expand...
Click to collapse
I didn't have these issues with my old Huawei.
domi_niku said:
I didn't have these issues with my old Huawei.
Click to expand...
Click to collapse
I've noticed very different Android Auto experiences with the same phone but different car brands before. I've used Android Auto in either 4 cars so far, two of them rentals. I believe my rental VW's Android Auto was horrendously slow and hard to get the touchscreen to respond, whatever the next rental was, was fine. Chevy and Subaru have been fine, too, although my Chevy Android Auto experience seemed better than Subaru, but the Subaru is acceptable.