Hi everyone, first of all, I'm sorry if I don't speak very good English...
A few days ago, I tried to install Xposed using Flashfire on my LG G Flex 2. But the smartphone got stuck at the LG logo during hours, and it never started, it is in bootloop.
The phone was in Android 5.1. When I try to start it in "Download mode" (holding Volume up and link it to my PC), the phone starts in Fastboot mode (on the top left corner, it is written "[310] Fastboot mode").
When I try to start it in Recovery Mode (holding Power button and Volume down), nothing happen, the screen is black and the LED notification flashes very quickly in red.
And when I try to link the phone to my PC while holding Volume down button, nothing happens.
So I don't know what I can do, is there anything to do ?
Thanks for reading me.
P.S. : I don't know if it can help, but I have another LG G Flex 2 fully functionnal with me.
Related
Hi.
So I was flashing a ROM using CWR but it looks like the Zip file was corrupted. So after I selected the zip file, the phone restarted and now is stuck on LG Logo.
Anyway to resurrect the phone from dead?
Any help will be greatly appreciated.
Try power button+vol down+3d button if you can get the recovery....
Claudio67 said:
Try power button+vol down+3d button if you can get the recovery....
Click to expand...
Click to collapse
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"
Farhang said:
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"
Click to expand...
Click to collapse
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...
Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
Click to expand...
Click to collapse
Oh my God!
I really love you! I went to recovery and thank God I had the KingDroid 3D Rom on my memory card. so I did a full wipe and flashed it and now the phone is back and good again.
THANKS A LOT!!! I really appreciate it.
wow well done!
Cya mate!
Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...
Click to expand...
Click to collapse
I have the stock v10c ROM on a 'Rogers' LG Optimus 3D.
I had been using the Google+ Android client and pushed the power button to put the phone tosleep (with the G+ screen still being displayed). About 15 mins later I pulled the phone out of my pocket and it was dark, but the touch countrols were all lit up.
I know that usually isn't good news.
I pulled the battery and tried to re-boot. It gets to the Rogers bitmap and then boot-loops, with a flash of the Rogers scren each time it restarts a cycle.
I did vol+down+Power and the it booted into a recovery (3e) menu that only offered me the chance to wipe all user data. Ok. I did that. The phone then presented a triangle logo and the green android and sat there.
After about 10 mins I pulled the battery again and did the Vol+down+3D button+Power boot to the REAL recovery menu.
I then did a factory reset. I have assumed the Home button is the enter button (BTW).
Again the triangle and the green android appear. They are still there 10 mins later.
Not sure what to do now...the phone won't boot and the factory reset won't fix it. But it isn't dead. I can still get to recovery, so in theory this is fixable. I just don't have time for it right now.
I was wondering if maybe the phone had updated OTA in my pocket and i didn't realise it and I may have messed up the process. But I have never seen a phone do an OTA update without first notifying the user and seeking confirmation...so I that probably isn't the case.
Very annoying.
I'm posting this here in case anyone else has the same experience.
hi boys
i just wanted install CWM in Rom-manager....i searched for it it found
LGE X2....and i installed it, after that i restarted the phone and now the phone stoped on Boot logo...........i mean when i want power on it, it stuck in LG logo
what must i do to fix it..........please help meeee.........please..........i afraid so muchhhhhhhhhhhhh
helppppppppppppppppppppppp
1 - Turn off your phone
2 - Press power and volume down until the LG logo apears.
3 - Release the power button but keep the volume down pressed.
This takes you to the recovery screen.
Do a factory reset using the volume button to scroll and the 3d button to select.
Hopefully this works otherwise like me at a couple of occasions you will need to flash a KDZ
if my post above does not work. take a look at the following link
http://forum.xda-developers.com/showthread.php?t=1186406
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
raza.javaid said:
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
Click to expand...
Click to collapse
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Hey,
The usual procedure is just to Hard Reset.
To do this, try
Step 1) With the phone off, Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously then while continuing to hold the VOL UP+ & VOL DOWN- buttons Press and Hold the POWER button till a menu appears.
Step 2) Use the VOL DOWN- button to navigate the menu & the VOL UP+ to select the RECOVERY option.
Step 3) When presented with a logo with an exclamation mark! Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously to bring up the next menu of options.
Step 4) Use the VOL DOWN- button to navigate the menu & the POWER button to select the Wipe data / Factory reset option.
Step 5) Use the VOL DOWN- button to navigate the menu to confirm this selection. Press the POWER button to begin the Factory Reset. (This may take a few minutes just be patient and wait.
Step 6) Once the task has completed press the POWER button to restart the device.
Source: Hard Reset Site
Or you may want to try manually flashing the original software to reset it back. You could try using flashtool.
Or You could contact the RC Help Chat 24/7
http://forum.xda-developers.com/showthread.php?t=1878241
Tell them what I said so they know where to go.
Thread Type: Can I haz Brick?
Hit Thanks if you found this useful
Silverlink34 said:
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Click to expand...
Click to collapse
Yes it takes me to the black boot up screen. I've tried charging and the phone charges up as well! That's a good sign!
Moto razr pricked and battry low
hi gays i thing this is my first time..i have Motorola razr xt 19 running ISC 4.0.4 I tried to flash cm 10 mod via recovery i do factory reset and i
formatting system when i reboot the phone it's stock on cm10 boot, more then an hour i have try to flash the oregnal fast-boot XML zip via RDS
but it's giving me that battery low fall, and i have try to charge the but its not charging???? please gays i need your help hot to charge the battery
sorry for my bad English
Hi everybody there. Am facing a huge problem on my LG G3. I don't know exactly what LG G3(Verizon,Sprint or whatever) it is. I am Malian (West African) and the phone was working fine. One morning it just didn't turn on normally. when I turn it on the sceen lights up and won't even progress to LG logo. Just a dimmed screen with black background. When I hold Vol+ down and plug the phone to my laptop it brings me to recovery mode with the red danger panel on the android logo. From there I can access recovery mode by clicking on the Power key. I see the different options(reboot system now,apply update from ADB etc.) To resolve it,I referred to a former threat . I downloaded Europe Common 16G D85510A_00.kdz ( hope this matches my 16GB G3) from a previous thread and tried to apply it thru LG flash tool 2014 but it's impossible because of,I think,the absence of download mode. I also tried holding down Vol- and plugging the phone. Drivers are installed but when I begin flashing the Lg support tool pops up and says phone is not connected.Briefly let's say that Recovery mode works but not download mode. Please help!!!: confused
TIM OF GOD said:
Hi everybody there. Am facing a huge problem on my LG G3. I don't know exactly what LG G3(Verizon,Sprint or whatever) it is. I am Malian (West African) and the phone was working fine. One morning it just didn't turn on normally. when I turn it on the sceen lights up and won't even progress to LG logo. Just a dimmed screen with black background. When I hold Vol+ down and plug the phone to my laptop it brings me to recovery mode with the red danger panel on the android logo. From there I can access recovery mode by clicking on the Power key. I see the different options(reboot system now,apply update from ADB etc.) To resolve it,I referred to a former threat . I downloaded Europe Common 16G D85510A_00.kdz ( hope this matches my 16GB G3) from a previous thread and tried to apply it thru LG flash tool 2014 but it's impossible because of,I think,the absence of download mode. I also tried holding down Vol- and plugging the phone. Drivers are installed but when I begin flashing the Lg support tool pops up and says phone is not connected.Briefly let's say that Recovery mode works but not download mode. Please help!!!: confused
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
Please ask your question here:
http://forum.xda-developers.com/lg-g3/help/help-thread-lg-g3-question-t2947298
That's a friendly help thread, specifically for the LG G3. You'll get the help you need there.
Good luck!
Thread closed.
Hey,
I had this problem with my Moto G 2013 (xt1032). I was installing a ROM with TWRP but, unfortunately, the process failed. I decided to leave TWRP and proceed into recovery mode in order to install the stock rom by adb. Right before leaving TWRP, a pop up showed up saying "No OS installed. Are you sure you wish to proceed?" After that, the phone turned off, and I tried going into recovery mode (vol -, power button), and it wasn't working. That was when I found out my phone was dead. I've tried to hold the vol - and the power button for like 2 min and it didn't work. I have also tried the "blank-flash.bat" method but it didn't work as well because there is no OS installed on my phone. I have done lots of research on pushing a ROM but I don't really think that is going to work. If any of you guys can help me on this I would be really glad because I really loved this device. Thanks! (forgot to mention that my PC recognizes my phone and that every time I connect my phone to the USB cable, the LED blinks and every time I hold the power button for 6 seconds, the LED blinks and I think the phone restarts or something.) Finally, thanks for opening my thread and for helping me!