I just tried using the G5 root method described here http://forum.xda-developers.com/tmobile-lg-g5/development/root-h830-t3384526 and now my phone is stuck in a bootloop with error 820 Boot verification fail. Is there any way to flash back the stock rom or get out of this bootloop?
Sounds like either-
a) your download of the TOT file was incomplete
b) the flash failed
c) you were running a different software version than the TOT expected
I would flash the 10D KDZ using LGUP to start from stock.
Files can be found here- http://forum.xda-developers.com/tmo...ock-h830-10d-rom-flashable-zips-imgs-t3406505
Flash the H83010d_00_0523.kdz using the REFURBISH option (note, you will lose all your data on the phone)
Then I would follow the root guide here- http://forum.xda-developers.com/tmo...p-step-guides-rooting-t-mobile-lg-g5-t3388272
It uses the same TOT posted by tungkick.
Good Luck!
Link not active any other sources ?
Dano79 said:
Link not active any other sources ?
Click to expand...
Click to collapse
Which links? They all seem to work fine....
The codefire links can be a little picky; I think I had to use IE to finally get them to work.
I have the root-guide links mirrored here-
https://drive.google.com/drive/folders/0B7YkJteoTsfnTHJ6SFBRODNHWTg
So recently I wanted to flash 20a via twrp on my G5 but it wasn't working. I reflashed 10i and my phone didn't want to boot up. So I decided to charge my phone after reflashing 10i once again without flashing supersu and I powered off the device and it turned back on with the "Your device is corrupt and it cannot be trusted sign" and so I tried to boot to recovery and my phone just factory reseted itself. I tried to boot into recovery with adb but to no avail. I even tried to flash 10d kdz and 10d tot both getting an error on LGUP and my phone is still stuck on firmware 10i. I even get an error when trying to update it with stock recovery. So now I have a phone with an unlocked boot loader and I cannot reroot again. Is there a way I can regain root? I knew I should have flashed supersu
RicardoSal24 said:
So recently I wanted to flash 20a via twrp on my G5 but it wasn't working. I reflashed 10i and my phone didn't want to boot up. So I decided to charge my phone after reflashing 10i once again without flashing supersu and I powered off the device and it turned back on with the "Your device is corrupt and it cannot be trusted sign" and so I tried to boot to recovery and my phone just factory reseted itself. I tried to boot into recovery with adb but to no avail. I even tried to flash 10d kdz and 10d tot both getting an error on LGUP and my phone is still stuck on firmware 10i. I even get an error when trying to update it with stock recovery. So now I have a phone with an unlocked boot loader and I cannot reroot again. Is there a way I can regain root? I knew I should have flashed supersu
Click to expand...
Click to collapse
I bet you didn't followed or read the 20a thread by autoprime nor did you bothered to read the TWRP thread as well. there's still a bug that prohibits you to downgrade from 20a unless you have a nandroid backup or a twrp recovery backup for the 10i. best option for now is to go back to 20a and wait for an update from the devs on fixing TWRP or try to follow the dirtycow method.
Jaistah said:
I bet you didn't followed or read the 20a thread by autoprime nor did you bothered to read the TWRP thread as well. there's still a bug that prohibits you to downgrade from 20a unless you have a nandroid backup or a twrp recovery backup for the 10i. best option for now is to go back to 20a and wait for an update from the devs on fixing TWRP or try to follow the dirtycow method.
Click to expand...
Click to collapse
The problem was that for some reason I couldn't update it but please pass the link to dirtycows :good:
RicardoSal24 said:
The problem was that for some reason I couldn't update it but please pass the link to dirtycows :good:
Click to expand...
Click to collapse
Look under the dev thread on autoprime topic about the stock N zips, if you read through last few pages you'll find all the links you need for recowvery to get root and twrp. Also if you're on 10i, why not just use lg up (make sure you either use older version or autoprime uppercut app) to flash 10D tot that already has twrp and then upgrade to stock 7 through twrp. Either way, all the info you need should be in last 3 pages of that thread by autoprime.
*** Edit ***
Just reread your post. If your getting errors flashing the 10D tot it's most likely due to you updating lg up, the .DLL, etc to install N. If so, uninstall lg up, and then download the lg up files and. DLL from the 10D thread. You can try uppercut app too as it's supposed to work between versions but I have not tested it myself. If all else fails then use the recowvery method.
jeffsga88 said:
Look under the dev thread on autoprime topic about the stock N zips, if you read through last few pages you'll find all the links you need for recowvery to get root and twrp. Also if you're on 10i, why not just use lg up (make sure you either use older version or autoprime uppercut app) to flash 10D tot that already has twrp and then upgrade to stock 7 through twrp. Either way, all the info you need should be in last 3 pages of that thread by autoprime.
*** Edit ***
Just reread your post. If your getting errors flashing the 10D tot it's most likely due to you updating lg up, the .DLL, etc to install N. If so, uninstall lg up, and then download the lg up files and. DLL from the 10D thread. You can try uppercut app too as it's supposed to work between versions but I have not tested it myself. If all else fails then use the recowvery method.
Click to expand...
Click to collapse
I've tried uppercut and I still get errors. I want to downgrade using the kdz file but the link is broken for me. Though I will try an older version of lgup. Thanks :good:
RicardoSal24 said:
I've tried uppercut and I still get errors. I want to downgrade using the kdz file but the link is broken for me. Though I will try an older version of lgup. Thanks :good:
Click to expand...
Click to collapse
Yeah not sure about uppercut. If you're still on 10i you should be fine using lgup to downgrade as long as you use the right version of lgup and h830 .DLL file. Also I'm not sure you can use refurbish option with kdz, but I know you can with tot. So maybe downgrade to 10D using tot and upgrade through twrp. If all else fails, use the recowvery steps on the above linked thread and you should be all good. Quick question, when you first start your phone, does it just show phone can not be checked for corruption or does it show the message can't be checked for corruption and visit this site... Etc. ? Reason I ask is the second message is updated bootloader and you won't be able to use lg up to flash MM firmware until you downgrade your bootloader.
jeffsga88 said:
Yeah not sure about uppercut. If you're still on 10i you should be fine using lgup to downgrade as long as you use the right version of lgup and h830 .DLL file. Also I'm not sure you can use refurbish option with kdz, but I know you can with tot. So maybe downgrade to 10D using tot and upgrade through twrp. If all else fails, use the recowvery steps on the above linked thread and you should be all good. Quick question, when you first start your phone, does it just show phone can not be checked for corruption or does it show the message can't be checked for corruption and visit this site... Etc. ? Reason I ask is the second message is updated bootloader and you won't be able to use lg up to flash MM firmware until you downgrade your bootloader.
Click to expand...
Click to collapse
Updated bootloader? I had no idea that was a problem. But since I'm on 20a i get the corruption message plus the link so O guess my bootloader is upgraded. How exactly DO you downgrade the bootloader?
I will mention that I'm stuck without twrp
RicardoSal24 said:
Updated bootloader? I had no idea that was a problem. But since I'm on 20a i get the corruption message plus the link so O guess my bootloader is upgraded. How exactly DO you downgrade the bootloader?
I will mention that I'm stuck without twrp
Click to expand...
Click to collapse
Okay since you have an upgraded bootloader and no twrp you will have to follow the steps in that post for recowvery which will give you Root and twrp. Once you have twrp, download the bootloader zip for whichever version you're planning on downgrading to (I.e. 10I bootloader if flashing 10i kdz) from autoprime and flash in twrp. You can also flash the complete zip (i.e. 10I complete zip) in twrp after flashing the 10I bootloader if you want to keep root and twrp (you will also have to flash SuperSU after flashing those files). But you can also flash kdz or tot with lg up after downgrading bootloader via twrp but you will lose root and twrp unless you flash 10D rooted tot.
jeffsga88 said:
Okay since you have an upgraded bootloader and no twrp you will have to follow the steps in that post for recowvery which will give you Root and twrp. Once you have twrp, download the bootloader zip for whichever version you're planning on downgrading to (I.e. 10I bootloader if flashing 10i kdz) from autoprime and flash in twrp. You can also flash the complete zip (i.e. 10I complete zip) in twrp after flashing the 10I bootloader if you want to keep root and twrp (you will also have to flash SuperSU after flashing those files). But you can also flash kdz or tot with lg up after downgrading bootloader via twrp but you will lose root and twrp unless you flash 10D rooted tot.
Click to expand...
Click to collapse
Can you please give the link to the thread you're talking about?
RicardoSal24 said:
Can you please give the link to the thread you're talking about?
Click to expand...
Click to collapse
The thread is:
http://forum.xda-developers.com/tmobile-lg-g5/development/stock-h830-20a-rom-flashable-zips-imgs-t3511294
If you're just trying to get twrp and root to downgrade look at the last 5 or so pages and look for the recowvery post. Once you do that visit:
http://forum.xda-developers.com/tmobile-lg-g5/development/stock-h830-10j-rom-flashable-zips-imgs-t3491363
and download the bootloader zip and then boot into twrp and flash the bootloader zip. Then you can use lg up to flash kdz file or tot file. If you want to do everything from twrp and skip lg up step just download the complete zip from the 10J thread and flash in twrp after flashing bootloader, then if you want to keep twrp and root make sure after flashing bootloader and complete zip in twrp flash SuperSU before rebooting.
jeffsga88 said:
The thread is:
http://forum.xda-developers.com/tmobile-lg-g5/development/stock-h830-20a-rom-flashable-zips-imgs-t3511294
If you're just trying to get twrp and root to downgrade look at the last 5 or so pages and look for the recowvery post. Once you do that visit:
http://forum.xda-developers.com/tmobile-lg-g5/development/stock-h830-10j-rom-flashable-zips-imgs-t3491363
and download the bootloader zip and then boot into twrp and flash the bootloader zip. Then you can use lg up to flash kdz file or tot file. If you want to do everything from twrp and skip lg up step just download the complete zip from the 10J thread and flash in twrp after flashing bootloader, then if you want to keep twrp and root make sure after flashing bootloader and complete zip in twrp flash SuperSU before rebooting.
Click to expand...
Click to collapse
Is there a video using the g5? I found only one and thats with the v20 and the guy in the video doesn't have much of a close up to his laptop
RicardoSal24 said:
Is there a video using the g5? I found only one and thats with the v20 and the guy in the video doesn't have much of a close up to his laptop
Click to expand...
Click to collapse
I don't think so but not 100% sure. If you follow the steps carefully you'll be fine. I didn't directly post the recowvery steps as I have not used this (I've had twrp and root since 10D). You can look on the v20 thread as it has a post for the v20 and our h830 recowvery method. Sorry I can't be more help with that specifically.
jeffsga88 said:
I don't think so but not 100% sure. If you follow the steps carefully you'll be fine. I didn't directly post the recowvery steps as I have not used this (I've had twrp and root since 10D). You can look on the v20 thread as it has a post for the v20 and our h830 recowvery method. Sorry I can't be more help with that specifically.
Click to expand...
Click to collapse
You were helpful enough :good:
Stuck on BrightHouse Nougat? NOT ANYMORE!!!
For the RETAIL UNLOCKED USA VARIANT RS988 ONLY!!!
THIS IS NOT A UNIVERSAL LG DEVICE CURE ALL!!!!
-> Without autoprime None of this would be possible!
autoprime said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG G5 ALL-IN-ONE THREAD
y u quote OP?
Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime
Find this thread helpful? Hit the Thanks button!
Feeling extra generous? Feel free to contribute to my LG G5 fund...
click my name at the top of any post and hit donate or click here.
#TEAMCODEFIRE
Click to expand...
Click to collapse
autoprime said:
UPPERCUT allows LGUP to instantly work with a ton of different LG models. No more hunting around for specific model files or being stuck without your model being detected. Simply install LGUP. Double-click the UPPERCUT.exe and LGUP will open and detect your device.
Information:
What's LGUP? LGUP is LG's internal Windows-only tool for flashing LG devices with stock firmware in KDZ, DZ and TOT formats. Previously extra installers and unique settings were needed for each model. Many less popular devices didn't have the files needed to work with their device.Well with UPPERCUT just double-click the EXE and LGUP will open and recognize your device.
Requirements:
1. Windows computer or virtual machine.
2. LG's Windows USB drivers installed and working.
3. LGUP 1.14 installed
4. LG device must show in Windows Device Manager under "Ports" as a LG Serial COM port.
5. KDZ, DZ or TOT file for your device.
How-to:
1. With all requirements above met... download and unzip UPPERCUT.
2. Double-click the UPPERCUT.exe every time you want to use LGUP. It's that simple.
Downloads:
UPPERCUT | LGUP | LG G5 Files | LG USB Drivers
When LGUP works for your model please post it in the thread! List:
your model (H850, D852, F600L etc..)
the software build you were on before flashing in LGUP (10A, 22C, 30B etc..)
the KDZ or TOT name you flashed using LGUP (H91810i_00_1202.kdz etc..)
Versions:
1.0.0.0 - Supports LG devices using a MSM 8996/8994/8992/8976/8952/8939/8937/8916/8909/8226 chipset. Street Fighter 2 SFX.
Let me know which combos do/dont work for you... UPPERCUT version, LGUP version, Current phone software version and KDZ/TOT software version and if the KDZ/TOT is custom or official.
Devices Supported:
G4, G5, G6, V10, V20, Flex 2, G Pad X, K10 and many more!
FAQ:
Q: Why isn't this working?
A: UPPERCUT requires LGUP 1.14 (not 1.11) installed in its default location prior to running.
Q: Why isn't anything happening when I press the boxing glove picture in this thread?
A: Really? ...
Q: What is this?
A: This is the simplest way to make LGUP work with your LG device.
Q: Refurbish option in LGUP doesn't work, what now?
A: Boot into stock recovery after the flash finishes and perform a factory reset. This is the same outcome as if Refurbish was selected.
Q: Why does this TOT file keep failing?
A: In most cases you're either trying to downgrade and it has been blocked by your phones download mode (not anti-rollback fuse.. that is different)... OR you are trying to use a custom-made TOT file which is not official or signed by LG. Flash an official KDZ instead. Do not ask for KDZs in this thread.. not the place.
Q: Where can I find a KDZ for my phone?
A: This is not a KDZ thread. Take the KDZ questions elsewhere.
Q: Why is my anti-virus scanner flagging this?
A: It's a false positive. Scanners like Kaspersky know better and don't flag the app but some others do. See post #59 for more info.
Q: Why is my device's model not detected in LGUP?
A: Make sure your devices chipset is supported by UPPERCUT. All models and software variants may not be supported even though chipset is listed.
If using a confirmed working device with UPPERCUT but your device is still not detected in LGUP you may have a "corrupted" misc partition...
as a last resort it has been confirmed in post #70 that wiping misc then booting into download mode allows the device to be detected with UPPERCUT + LGUP 1.14. This may not always work. And without root you cannot do this.
For more G5 info see my All-in-One Thread HERE
Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime
Find this thread helpful? Hit the Thanks button!
Feeling extra generous? Click my name at the top of any post and hit donate or click here.
#TEAMCODEFIRE
this post looks best in desktop view using 2015 dark theme
Click to expand...
Click to collapse
Thank These Threads Above ^^^
Download ->
RS988 Build 11c TWRP Flashable Complete
RS988 Build 11c KDZ
UPPERCUT
Procedure ->
Flash Build 11c with TWRP -> Boot into force reboot loop.
Pull the battery and boot to Download Mode
Use UPPERCUT to REFURBISH Build 11c back onto your device with the Build 11c KDZ
SUCCESS!!!
Want Nougat for US back?
Just OTA back to Nougat for US
XDA:DevDB Information
Official RS988 USA Retail Unlocked BrightHouse Fix / Fully Functional Stock Downgrade, ROM for the LG G5
Contributors
CIGBURN, autoprime
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.1.x
ROM Firmware Required: ANY Firmware Capable for RS988 Retail Unlocked Only
Based On: STOCK
Version Information
Status: Stable
Current Stable Version: FINAL
Stable Release Date: 2017-10-29
Created 2017-10-30
Last Updated 2017-12-22
Has anyone done this and can confirm working? I want to buy LG G5 RS988 but I need root!!
CIGBURN said:
Stuck on BrightHouse Nougat? NOT ANYMORE!!!
For the RETAIL UNLOCKED USA VARIANT RS988 ONLY!!!
THIS IS NOT A UNIVERSAL LG DEVICE CURE ALL!!!!
-> Without autoprime None of this would be possible!
Thank These Threads Above ^^^
Download ->
RS988 Build 11c TWRP Flashable Complete
RS988 Build 11c KDZ
UPPERCUT
Procedure ->
Flash Build 11c with TWRP -> Boot into force reboot loop.
Pull the battery and boot to Download Mode
Use UPPERCUT to REFURBISH Build 11c back onto your device with the Build 11c KDZ
SUCCESS!!!
Want Nougat for US back?
Just OTA back to Nougat for US
XDA:DevDB Information
Official RS988 USA Retail Unlocked BrightHouse Fix / Fully Fictional Stock Downgrade, ROM for the LG G5
Contributors
CIGBURN, autoprime
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.1.x
ROM Firmware Required: ANY Firmware Capable for RS988 Retail Unlocked Only
Based On: STOCK
Version Information
Status: Stable
Current Stable Version: FINAL
Stable Release Date: 2017-10-29
Created 2017-10-30
Last Updated 2017-11-01
Click to expand...
Click to collapse
I did by accident Flash the 10h firmware and was stuck on brightpoint I can confirm that this method does work thank you
I followed all the steps, but I keep running into the same issue:
Using LGUP to flash the 11c kdz file, LGUP gets stuck at %10 showing the error report: "Error: 0x2BC, Invalid command response code = 0x80000121".
After that, my phone would only boot to Download Mode, so I had to use LGUP to flash a (Brightpoint) 10h kdz file. (LGUP had no issue with the 10h kdz file.)
Yes, I am using LGUP Store Version 1.14 and the DLL Version is 1.0.28.9
What am I doing wrong? I need to get rid of this Brightpoint issue in order to unlock the bootloader!
Wait, do you mean "Brighthouse" or "Brightpoint"?????????
TheTechHobbyist said:
I followed all the steps, but I keep running into the same issue:
Using LGUP to flash the 11c kdz file, LGUP gets stuck at %10 showing the error report: "Error: 0x2BC, Invalid command response code = 0x80000121".
After that, my phone would only boot to Download Mode, so I had to use LGUP to flash a (Brightpoint) 10h kdz file. (LGUP had no issue with the 10h kdz file.)
Yes, I am using LGUP Store Version 1.14 and the DLL Version is 1.0.28.9
What am I doing wrong? I need to get rid of this Brightpoint issue in order to unlock the bootloader!
Wait, do you mean "Brighthouse" or "Brightpoint"?????????
Click to expand...
Click to collapse
Never mind. I just realized this fix is for phones that were built for the open market and switched to brightpoint by accident. My phone (probably) came with Brightpoint. (I bought it used.)
Awkydee said:
Has anyone done this and can confirm working? I want to buy LG G5 RS988 but I need root!!
Click to expand...
Click to collapse
This is a fix for those who accidentally flashed bright house. I can 100% confirm that this works it even allows you to official ota back to nougat.
TheTechHobbyist said:
I followed all the steps, but I keep running into the same issue:
Using LGUP to flash the 11c kdz file, LGUP gets stuck at %10 showing the error report: "Error: 0x2BC, Invalid command response code = 0x80000121".
After that, my phone would only boot to Download Mode, so I had to use LGUP to flash a (Brightpoint) 10h kdz file. (LGUP had no issue with the 10h kdz file.)
Yes, I am using LGUP Store Version 1.14 and the DLL Version is 1.0.28.9
What am I doing wrong? I need to get rid of this Brightpoint issue in order to unlock the bootloader!
Wait, do you mean "Brighthouse" or "Brightpoint"?????????
Click to expand...
Click to collapse
You have to use twrp to flash the correct un-modified stock in the instructions and that will tell download mode that the usa fingerprint is on the phone and will allow you to use the refurbish option. You have to flash stock in twrp first before using LG UP. Please re-read the instructions in the OP, thanks!
i flashed the 11c full package using TWRP then refurbished the 11c KDZ using LGUP and UPPERCUT and took OTA to 11d after installation the phone required a PIN to power on the device and i entered my pin and it says wrong 29/30 left
BahaEzawi said:
i flashed the 11c full package using TWRP then refurbished the 11c KDZ using LGUP and UPPERCUT and took OTA to 11d after installation the phone required a PIN to power on the device and i entered my pin and it says wrong 29/30 left
Click to expand...
Click to collapse
This device setups with /data partition encryption. Do a factory reset with stock recovery to fix this.
After carrying out the process, i can not enter the bootloader with:
adb reboot bootloader
then it restarts itself.
How can I access the bootloader?
darkalexpp said:
After carrying out the process, i can not enter the bootloader with:
adb reboot bootloader
then it restarts itself.
How can I access the bootloader?
Click to expand...
Click to collapse
Are you back on Marshmallow? If so then you can't reboot into bootloader anymore.
I can confirm that It is working, I've first flashed the zipfile,
but then stayed in twrp to try and keep twrp as recovery in a cheeky way, by using adb and using the dd command I've overwritten twrp again to it's rightful partition,
pulling the battery afterwards, and reattempting to go into twrp, however it failed, after the recovery menu buttons (yes>yes) some red text appeared at the left top corner about MISMATCH, figures, 11c doesn't recognize the unlock..
I then returned to following the instructions, letting the phone boot loop (when getting into the encrypting you're data and the wallpaper),
Got into download mode, flashed 11c (I did have some wierd message about 'partitions have changed (system, backup gpt, and more..), would you like to continue?' Yes, I don't care, It's a kdz, I trust it..
Phone successfully flashed the kdz, and booted, although I had my heart drop, since in the past it happened to me and I couldn't fix it:
A few seconds (1 to 10) after boot finishes and setup wizard comes up, the device randomly reboots, without reason, and does so on all subsequent boots,
with the kdz returning the og stock recovery, I then opted to factory reset, after that boot was stable, and didn't restart, gone straight to checking updates, and 11d came up
Hope this helps anyone, I was stuck on 10h Brightpoint (rooted&magisk&xposed&twrp) for 2 years, no tethering and weird bugs, now on my path to nougat again, to have all my rooted&magisk&xposed&twrp back with security and bug fixes
Will update here when finished, PM me If I DONT (I hate when people don't update)
Edit #1: When 11d boots with bootloader unlocked there's 'your device cannot be checked for corruption' in a different way then 10h had
And, after the update to 11d, first boot failed because it requested my encryption unlock key, factory reset again, fixed it, boot is stable
11d is Android M 6.0.1
Edit #2: 11d has update to 21a, downloading now...
Edit #3: haven't updated yet, confirmed - 'adb reboot bootloader' getis into fastboot, flashing twrp worked, I'm going to skip the OTE update, and just flash the ZIP file (AFTER yet another wipe, and double check that 11d download has been canceled [someone was stuck because he tried to both flash while fota already downloaded])
Edit #4: Flashing 21a worked, but this time, I deleted "recovery-from-boot.p" file in the root of /system, and installed magisk, although, had to do another wipe (basically wipe every change..), now on 21a Stable boot
Edit #5: Again, 21a wanted to OTA to 21b, I skipped it, got into TWRP, and repeat steps to root 21a, Flash the Complete 21d zip, delete "recovery-from-boot.p" file in the root of /system, and reset the misc partition, to make sure TWRP and phone doesn't conflict (dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc), flash magisk, phone boots successfully (one restart after setup wizard probably to properly set google account or something, after that, systemless xposed, and I'm golden..)
Can uppercut be used to install 10h after 21d? Does it wipe away the userdata? I know I am trying to go the other way instead of what this thread intended. But I don't have any KDZ for any RS988 version after 10c. Flashing kdz of 10c using uppercut just aborts the process after 4%
Full Background:
My LG G5 (RS988) was already on 21d when it started throwing "System.ui is not responding error" after boot. The screen remains blank when error comes and closing it doesn't give access to unlock screen. However, it seems all other apps and processes are working fine in backend - just that home screen is unable to It was never rooted or had bootlocker unlocked. I am primarily interested in recovering my data, so factory reset is not an option for me. I cannot use ADB as I cannot unlock my screen because of this error.
Hey, ive got my g7 today and wanted to use a rooted gsi to dump its kernel and make twrp for it .
at first it didnt want to flash the gsi after i solved that it just reboots after lg logo , so stay away from gsi's for now.
i will try to get my hands on a kernel dump and use that for twrp
J0SH1X said:
Hey, ive got my g7 today and wanted to use a rooted gsi to dump its kernel and make twrp for it .
at first it didnt want to flash the gsi after i solved that it just reboots after lg logo , so stay away from gsi's for now.
i will try to get my hands on a kernel dump and use that for twrp
Click to expand...
Click to collapse
What variant do you have?
sickkside13 said:
What variant do you have?
Click to expand...
Click to collapse
the european international variant
For those of you who didnt read this and need to recover their phones here are the steps to get lgup to work
first download this zip with lgup installer Download
2nd download this zip with LMG710EM10B dll inside Download
3rd install lgup
4th place the dll from rar file to "C:\Program Files (x86)\LG Electronics\LGUP\model\common"
5th lgup will now work with your g7 thinq with 10b kdz
6th profit