Related
I am Using 6.0 but It's draining battery too fast and I would like to downgrade to lollipop But when i flash it using the LG FLASH TOOL 2014 using kdz file then on download mode it just blink the screen of download mode and tool says RETRY
I have setup everything like driver etc everything is good and setup
I think it some thing like that 6.0 blocking to downgrade, I can't understand why this happening
And I have installed LGUP too is says "Please connect the known device" :/
Help
rashid_khokhar said:
I am Using 6.0 but It's draining battery too fast and I would like to downgrade to lollipop But when i flash it using the LG FLASH TOOL 2014 using kdz file then on download mode it just blink the screen of download mode and tool says RETRY
I have setup everything like driver etc everything is good and setup
I think it some thing like that 6.0 blocking to downgrade, I can't understand why this happening
And I have installed LGUP too is says "Please connect the known device" :/
Help
Click to expand...
Click to collapse
Had the same problem. You need to download the required DLL for LGUP to find the phone. Just google: LGUP d851 DLL and look for LGUP_8974_DLL_Ver_0_5.MSI
Once you install the DLL LGUP will work and you will be able to flash lollipot
aponsnava said:
Had the same problem. You need to download the required DLL for LGUP to find the phone. Just google: LGUP d851 DLL and look for LGUP_8974_DLL_Ver_0_5.MSI
Once you install the DLL LGUP will work and you will be able to flash lollipot
Click to expand...
Click to collapse
Thanks a lot Brother :good::good::good:
It worked for me
I just tried using the G5 root method described here http://forum.xda-developers.com/tmobile-lg-g5/development/root-h830-t3384526 and now my phone is stuck in a bootloop with error 820 Boot verification fail. Is there any way to flash back the stock rom or get out of this bootloop?
Sounds like either-
a) your download of the TOT file was incomplete
b) the flash failed
c) you were running a different software version than the TOT expected
I would flash the 10D KDZ using LGUP to start from stock.
Files can be found here- http://forum.xda-developers.com/tmo...ock-h830-10d-rom-flashable-zips-imgs-t3406505
Flash the H83010d_00_0523.kdz using the REFURBISH option (note, you will lose all your data on the phone)
Then I would follow the root guide here- http://forum.xda-developers.com/tmo...p-step-guides-rooting-t-mobile-lg-g5-t3388272
It uses the same TOT posted by tungkick.
Good Luck!
Link not active any other sources ?
Dano79 said:
Link not active any other sources ?
Click to expand...
Click to collapse
Which links? They all seem to work fine....
The codefire links can be a little picky; I think I had to use IE to finally get them to work.
I have the root-guide links mirrored here-
https://drive.google.com/drive/folders/0B7YkJteoTsfnTHJ6SFBRODNHWTg
Here above,
LG V20 TOT File v10i for F800K (KT Mobile)
Use it for root exploit and Development
Download (file is compressed, download and simply unzip it)
Mirror
support me if you want, and pay me a beer
wolfgart said:
Here above,
LG V20 TOT File v10i for F800K (KT Mobile)
Use it for root exploit and Development
Download (file is compressed, download and simply unzip it)
Mirror
support me if you want, and pay me a beer
Click to expand...
Click to collapse
thanks , do you have the dll file?
hkfriends said:
thanks , do you have the dll file?
Click to expand...
Click to collapse
Hey bro,
You don't need any DLL file.
To flash it you simply have to use same LGUP version used for LG G5 and follow same steps like you flash for KDZ files.
Just tried and it works perfectly
Also, LGUP can take dz file for upgrade (data stays intact).
is it possible to insert SuperSu directly into the restore file to have a pre rooted stock rom, while we wait for TWRP??
Amd4life said:
is it possible to insert SuperSu directly into the restore file to have a pre rooted stock rom, while we wait for TWRP??
Click to expand...
Click to collapse
That's what @tungkick did.
He made prerooted .tot for G5 and .dz for G Pad X 8.0
Both are T-Mobile version with unlocked bootloader with missing fastboot commands.
Amd4life said:
is it possible to insert SuperSu directly into the restore file to have a pre rooted stock rom, while we wait for TWRP??
Click to expand...
Click to collapse
i hope yes
but locked bootloader state could avoid boot unsigned code ...
wolfgart said:
i hope yes
but locked bootloader state could avoid boot unsigned code ...
Click to expand...
Click to collapse
Actually, locked bootloader does not matter anymore.
You have to do reverse engineering with hex editor to retrieve keys in order to bypass the bootloader. This is how Samsung Tab A6 can be rooted and TWRP installed even the bootloader is tight locked (and you have to patch the kernel to change SE Linux policy).
mingkee said:
Actually, locked bootloader does not matter anymore.
You have to do reverse engineering with hex editor to retrieve keys in order to bypass the bootloader. This is how Samsung Tab A6 can be rooted and TWRP installed even the bootloader is tight locked (and you have to patch the kernel to change SE Linux policy).
Click to expand...
Click to collapse
Great to know
@tungkick can help all of us
mingkee said:
Actually, locked bootloader does not matter anymore.
You have to do reverse engineering with hex editor to retrieve keys in order to bypass the bootloader. This is how Samsung Tab A6 can be rooted and TWRP installed even the bootloader is tight locked (and you have to patch the kernel to change SE Linux policy).
Click to expand...
Click to collapse
It would be great to bring all our computers together to crack the code like mining bit coins. How neat would that be.
Are you guys optimistic for root on the V20? Or will it be a similar story to that of the Note 7 with 99.9% stable root?
Thanks for your efforts.
Hi i got few Questions can i flash this on V20 F800L ?
and how much bloatware this firmware got can you please post some screen shots of the bloatware please
Thank you
iemwatiem said:
Hi i got few Questions can i flash this on V20 F800L ?
and how much bloatware this firmware got can you please post some screen shots of the bloatware please
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/v20/development/lg-v20-f800l-t3487554
Be quiet with downgranding FW ...
wolfgart said:
http://forum.xda-developers.com/v20/development/lg-v20-f800l-t3487554
Be quiet with downgranding FW ...
Click to expand...
Click to collapse
Thanks for the reply i am asking this because i have the LG V20 F800L and their are some carrier bloatware i cant remove its so annoying and its also in Korean Language .
Thats why i want to know if it possible to flash the F800K on my F800L to try any luck with bloatware ?
iemwatiem said:
Thanks for the reply i am asking this because i have the LG V20 F800L and their are some carrier bloatware i cant remove its so annoying and its also in Korean Language .
Thats why i want to know if it possible to flash the F800K on my F800L to try any luck with bloatware ?
Click to expand...
Click to collapse
F800K is the phone from Korean Telcom so you are going to have the same issue. I have the F800K this is how I know.
wolfgart said:
Hey bro,
You don't need any DLL file.
To flash it you simply have to use same LGUP version used for LG G5 and follow same steps like you flash for KDZ files.
Just tried and it works perfectly
Click to expand...
Click to collapse
Wolf, could you please upload the LGUP you are using. All the ones I have found will not go past 9-10% when trying to flash the Tmobile .tot.
f800S?
wolfgart said:
Hey bro,
You don't need any DLL file.
To flash it you simply have to use same LGUP version used for LG G5 and follow same steps like you flash for KDZ files.
Just tried and it works perfectly
Click to expand...
Click to collapse
HOW?? Did you flash the extracted .bin files? Were you able to convert the .tot to .kdz? Please share. THX.
Boot Loop
Hey, My phone kept telling me that I had my jack connected. I wipe the system and now it's stuck in a bootloop and keeps going back to TWRP. ANY HELP PLEASE!!!!
Hi
Has anyone used this successfully on the F800K ?
Does it flash perfectly??
Could anyone post a new download link? Thanks!
Hello guys
I found a simple firmware for Nokia 3 TA-1032
This can be flash Nokia 3 using SP flash tool
Here is the link for Download
https://mega.nz/#!FMpHVYpZ!mNVx6Ifr6z6YpslP-F4kLBs1ldfuiZEiZOjQATgORWg
For patch thanks to @Riadh300
http://www.mediafire.com/file/r8rp0agqpnqb8ba/DA_SWSEC_CRYPTO20.bin
sltushar said:
Hello guys
I found a simple firmware for Nokia 3 TA-1032
This can be flash Nokia 3 using SP flash tool
Here is the link for Download
https://mega.nz/#!FMpHVYpZ!mNVx6Ifr6z6YpslP-F4kLBs1ldfuiZEiZOjQATgORWg
Click to expand...
Click to collapse
is this for single sim or dual sim or both?
freaks211 said:
is this for single sim or dual sim or both?
Click to expand...
Click to collapse
Its for TA-1032, both
Do you know how we can convert the other flash files for the official flash tool to sp flash tools? If I had a scatter file I could use my device and upload the rom from the device to make a SP flash tool compatable image.
JakesDen said:
Do you know how we can convert the other flash files for the official flash tool to sp flash tools? If I had a scatter file I could use my device and upload the rom from the device to make a SP flash tool compatable image.
Click to expand...
Click to collapse
I downloaded the link he shared ,it has a scatter file inside, is that what you need?
JakesDen said:
Do you know how we can convert the other flash files for the official flash tool to sp flash tools? If I had a scatter file I could use my device and upload the rom from the device to make a SP flash tool compatable image.
Click to expand...
Click to collapse
Yes it can be, if you can extract the .nb0 file then you can browse the firmware images according to the scatter files, but as i saw .nb0 file is not exctractable due to encryption, and OST tool can descypt it but its can only flash not extract
Why dont you flash through provided firmware
I might reverse engineere OST later if I have time.
Can you send me the scatter file?
Using mobile data atm so don't have enough data spare to download anything else.
sltushar said:
Its for TA-1032, both
Click to expand...
Click to collapse
how about the one for TA-1020, mt6735
kenneth.mtika said:
how about the one for TA-1020, mt6735
Click to expand...
Click to collapse
You can flash diffrent varient on diffrent varient of nokia 3 devices
Has anyone actually flashed this firmware? We've already had instances of people flashing a supposed custom rom and bricking their phones. I think care needs to be taken before trying this kind of stuff - especially when it comes to Nokia phones
Confirmed
That's work on my device with patched download agent..
Riadh300 said:
That's work on my device with patched download agent..
Click to expand...
Click to collapse
Can u share the patch
http://www.mediafire.com/file/r8rp0agqpnqb8ba/DA_SWSEC_CRYPTO20.bin
download it and and put it in spflashtools
2 put your firemwre and click download
3 quickly press power button and volume up and insert cable
working 100%
Nokia
my nokia 3 vibrated, but when flashing it only remains black and no longer vibrates only remains in black
hi ... the master can you give me the suitable auth file for my phone nokia 3, my phone is hardbrick. i tried recovering with sp flash tool using AUTH FILE but it did not solve the problem of AUTH FILE ERROR and so on, help me master ... ?? help me, before thanks ..
D32n said:
hi ... the master can you give me the suitable auth file for my phone nokia 3, my phone is hardbrick. i tried recovering with sp flash tool using AUTH FILE but it did not solve the problem of AUTH FILE ERROR and so on, help me master ... help me, before thanks ..
Click to expand...
Click to collapse
What version of spflashtool are you using?
redweaver said:
What version of spflashtool are you using?
Click to expand...
Click to collapse
I use sp flashtool v 15.1824
How to install?
My phone is stuck on no command. please share how can I install this rom.
Whats The Advantage Of Flashing This File
can't boot.
reboot loop,no screen.
EDIT: I don't need this anymore since I've fixed the problem
Mine stuck in EDL mode after I accidentally erased my partitions. I have followed this tutorial for LG G7, but I was unable to generate xml files required to flash the unpacked .dz firmware. I tried to search similar topic in this forum and G8 forum but it's a dead end.
Hi , how did you fix it , please help I'm in the same situation now
Bronnel said:
Hi , how did you fix it , please help I'm in the same situation now
Click to expand...
Click to collapse
wait I will make a tutorial later. What variant of V50 do you have? If it's the sprint variant you can just use this file https://forum.xda-developers.com/t/lg-v50-lost-sn-after-unbrick.4321877/post-85564585
if it's not, you have to extract your .KDZ with KDZtools from the Chinese forum to get the compatible .bin partitions.
Now I need a blank .qcn file to restore my IMEI because my .qcn backup file seems to be corrupted.
I have Sprint V50 unlocked , V450pm
I did use that file and flashed all partitions one by one but still stuck in EDL mode , I cannot reboot to system, I contacted paid service they claim that they can fix my device remotely , it costs 20+ USD , I'm not sure if can trust them
did you use rawprogram and patch xml, can you please show me how to do that?
Bronnel said:
I have Sprint V50 unlocked , V450pm
I did use that file and flashed all partitions one by one but still stuck in EDL mode , I cannot reboot to system, I contacted paid service they claim that they can fix my device remotely , it costs 20+ USD , I'm not sure if can trust them
did you use rawprogram and patch xml, can you please show me how to do that?
Click to expand...
Click to collapse
I only use the rawprogram0.xml - 6.xml in QFIL. Then, it will be in a boot loop condition, but you can access the download mode. Now you have to flash your stock .kdz firmware in the PARTITION DL mode, since the refurbish mode won't work. Though, I'm not sure if the KDZ of your variant is available, as I couldn't find them.
You are right KDZ not available for sprint , and I used rawprogram0.xml - 6.xml but only 0 and 4 are working others are not working it give sahara fail error
Bronnel said:
You are right KDZ not available for sprint , and I used rawprogram0.xml - 6.xml but only 0 and 4 are working others are not working it give sahara fail error
Click to expand...
Click to collapse
I think the Sahara failure is an error of USB connection than an error of the rawprogram files. Usually, if that happens, you need to restart the EDL mode. Maybe you can try flashing other V450 .kdz. For example, V450VM for Verizon.
you saved my life , you are right it was usb connection issue , my device boots to system without issue , but now volume buttons are not working
Bronnel said:
you saved my life , you are right it was usb connection issue , my device boots to system without issue , but now volume buttons are not working
Click to expand...
Click to collapse
you need to find a way to upgrade/downgrade the stock firmware.
If you happen to find a dummy .qcn backup from someone, please notify me. I have a hard time recovering my IMEI.
wibigdog said:
you need to find a way to upgrade/downgrade the stock firmware.
If you happen to find a dummy .qcn backup from someone, please notify me. I have a hard time recovering my IMEI.
Click to expand...
Click to collapse
My V50 is completely restored like new , IMEI is still there. so thank you for your guidance.
There is a trusted service that can restore your IMEI , I contacted them yesterday ,they are very good , they will restore your IMEI if you want , I will PM you their detail
wibigdog said:
wait I will make a tutorial later. What variant of V50 do you have? If it's the sprint variant you can just use this file https://forum.xda-developers.com/t/lg-v50-lost-sn-after-unbrick.4321877/post-85564585
if it's not, you have to extract your .KDZ with KDZtools from the Chinese forum to get the compatible .bin partitions.
Now I need a blank .qcn file to restore my IMEI because my .qcn backup file seems to be corrupted.
Click to expand...
Click to collapse
Pls help i cant find the compatible bin as almost every thread has only for sprint, my phone is korean variant
LawreNczzze said:
Pls help i cant find the compatible bin as almost every thread has only for sprint, my phone is korean variant
Click to expand...
Click to collapse
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
May i ask where did you get the correct lgup version and v50 dll so i can proceed. Thank you very much for the quick reply
wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
Or can you send me the whole process on how you revive your phone? I'm actually a noob and doesnt really know much about anything in here, I'm just hoping to see if I could still use the phone
You guys are fighting a really tough battle. If you’ve unlock your boot loader then android 12 GUI RC is the way to go! Just put your phone in fast boot mode and two flashes and your done.
hooutoo said:
You guys are fighting a really tough battle. If you’ve unlock your boot loader then android 12 GUI RC is the way to go! Just put your phone in fast boot mode and two flashes and your done.
Click to expand...
Click to collapse
Do you have more information? because I would like to flash android 12 release candidate instead of fighting with this phone any further. Thank you.
i delete all partition, i was reboot, but imei 0, can i fix this
hello i have a sprint v50 variant but i don't have recovery or fastboot mode i have unlocked bootloader