In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Custom ROMs (Android 6.0 and newer)
- Available here: https://forum.xda-developers.com/android/general/uhans-a101-development-roms-recovery-t3532601
Stock (Android 6.0)
- 20161212: https://mega.nz/#F!WIEWjSZK!vuxDJ9Zxe0Jconapo1pGOA
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20160914: https://mega.nz/#F!zEkEzJjT!bMDlgQJYhSLMWucx1l9EkA -- TEMP. NOT WORKING
- 20160831: https://mega.nz/#!9J10wBzR!tacqbzOZ0xshOyYfpHTuPKXFh2ecgd3rZhvmDvQadHM
- 20160817: https://www.androidfilehost.com/?fid=24591000424958909
Flash Tool
- Flashing Procedure with links inside (HOW-TO): https://mega.nz/#!xREFXJBT!ujYEeaQZtLzDH4UC86Qhlq6D_AdCPeNZmM0NF1x1niM
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.0.2 by @jemmini : https://mega.nz/#!gZsQVTpA!C0FglKk3zChKCAowBVHlky-dxTAbYBQzBzSMGFNXyqg - COMPATIBLE WITH 20160830 ROM
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
20160817 Stock ROM added to first post.
Official UHANS A101 Firmware Upgrade procedure added to first post!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.nz/#F!zEkEzJjT!bMDlgQJYhSLMWucx1l9EkA
TWRP 3.0.2 added to first post. Thanks @jemmini
Bonjour,
Merci pour ce travail et le partage.
021055 said:
Bonjour,
Merci pour ce travail et le partage.
Click to expand...
Click to collapse
English please, thank you.
Hello,
Thank you for this work and sharing.
021055 said:
Hello,
Thank you for this work and sharing.
Click to expand...
Click to collapse
You're welcome. Keep following this thread for more upcoming updates
I am looking to root my A101!
Not sure where to start really. I have a picture here, it seems to be a custom build - https://drive.google.com/open?id=0B7S5oVxYtbTWSUUxS3BoZTBaT0U
Buying Uhans A101
And how you can redeem Uhans A101 directly from the manufacturer? Like it!
I've tried to root the phone to delete de Youtube application and install the latest version.
The phone is updated to V3.07 (2016-09-20 version)
I've tried to "fastboot oem unlock" to install TWRP, but it fails with "Unlock operation is not allowed"
Do i need to flash the V3.05 version posted here before?
Thanks
Hi all,
I have made some more tests this morning about the YouTube App problem :
1./ YouTube app version is Not up to date, and not possible to update :
The Uhans A101 phone YouTube App installed version is 5.7.41 (very old, or "hybrid home made version" ?)
It is not shown on the Google PlayStore in my installed apps, as if it was not installed properly.
So it can NOT be updated at all, on the Goolge PlayStore, as it sould be.
The official YouTube app most recent version on the Google PlayStore is 11.35.60, very far from the 5.7.41 of the Uhans A101
I noticed that the Android task killer apps do not see the YouTube app, and this is not normal either.
2./ YouTube user account connected causes YouTube App screen freezes :
I noticed that when the YouTube user account was Not connected, the YouTube app plays videos correctly with no problem !
When we connect to the YouTube user account, the YouTube app of Uhans A101 (version 5.7.41) can't play videos, and freezes, and the screen is blocked !!
To reproduce the screen freezes of the YouTube App you can run the following tests :
Insert a sim card (facultative)
Log on to the Google PlayStore account with user and password (as every customer does)
Open Youtube
++Connect to the Youtube user account (same user account as the Google PlayStore and Gmail)
And try to play different videos, different sizes, quality and length
Then you should get a screen freeze and YouTube app is blocked !
Any customer is connected to their Google PlayStore, and Gmail, and YouTube account.... so they will have the same YouTube app Freezes.
So YouTube app on Uhans A101 is definitely a problem on all the Uhans A101 at the moment.
What can we do please ?
Thank you in anticipation.
Agnes Stewart said:
And how you can redeem Uhans A101 directly from the manufacturer? Like it!
Click to expand...
Click to collapse
???
sergio.otero said:
I've tried to root the phone to delete de Youtube application and install the latest version.
The phone is updated to V3.07 (2016-09-20 version)
I've tried to "fastboot oem unlock" to install TWRP, but it fails with "Unlock operation is not allowed"
Do i need to flash the V3.05 version posted here before?
Thanks
Click to expand...
Click to collapse
There is no need to execute that command.
Just install TWRP with SP Flash Tool and use adb to manage it because the touchscreen isn't working yet.
Seb14 said:
Hi all,
I have made some more tests this morning about the YouTube App problem :
1./ YouTube app version is Not up to date, and not possible to update :
The Uhans A101 phone YouTube App installed version is 5.7.41 (very old, or "hybrid home made version" ?)
It is not shown on the Google PlayStore in my installed apps, as if it was not installed properly.
So it can NOT be updated at all, on the Goolge PlayStore, as it sould be.
The official YouTube app most recent version on the Google PlayStore is 11.35.60, very far from the 5.7.41 of the Uhans A101
I noticed that the Android task killer apps do not see the YouTube app, and this is not normal either.
2./ YouTube user account connected causes YouTube App screen freezes :
I noticed that when the YouTube user account was Not connected, the YouTube app plays videos correctly with no problem !
When we connect to the YouTube user account, the YouTube app of Uhans A101 (version 5.7.41) can't play videos, and freezes, and the screen is blocked !!
To reproduce the screen freezes of the YouTube App you can run the following tests :
Insert a sim card (facultative)
Log on to the Google PlayStore account with user and password (as every customer does)
Open Youtube
++Connect to the Youtube user account (same user account as the Google PlayStore and Gmail)
And try to play different videos, different sizes, quality and length
Then you should get a screen freeze and YouTube app is blocked !
Any customer is connected to their Google PlayStore, and Gmail, and YouTube account.... so they will have the same YouTube app Freezes.
So YouTube app on Uhans A101 is definitely a problem on all the Uhans A101 at the moment.
What can we do please ?
Thank you in anticipation.
Click to expand...
Click to collapse
Without root you can't do anything for now.
Ok, i've managed to update the Youtube App.
After some tests, these are the steps i've followed after having drivers and things downloaded.
Remember, when using SP Flash Tool, always phone switched off and without battery
It's recommended to follow the steps to backup your NVRAM: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Steps to update Youtube:
Open SP Flash tool and go to "Download" tab
Download-agent: MTK_AllInOne_DA.bin
Scatter: MT6737M_Android_scatter
Check only "recovery" checkbox and in the same row select recovery.img from TWRP folder
Select "Download only" in the combo
Click "Download"
Connect the phone (switched off!!) and wait for a big Ok message
Close SP Flash Tool
Put the battery back and press and hold up & power until 3 options appear. Select "recovery" following the instructions (trying to boot normally and then using "adb reboot bootloader" has worked 1 time for me. It seems the system is replacing recovery to stock.
Optional: make a backup with TWRP: "adb shell" and then "twrp backup XXX" (haven't found nor tried what to put after backup)[/B]
Upload SuperSu with: "adb push SuperSU-v2.78-201609011115.zip /sdcard"
Install it via TWRP: "adb shell" and then "twrp install /sdcard/SuperSU-v2.78-201609011115.zip"
Reboot with "adb reboot"
Install "System app remover", the free version
Select "Youtube" and uninstall, granting supersu permissions when asked.
Reboot the phone
Install Youtube from the market and enjoy
EDIT: funny thing, in other phone before updating i've applied the same steps and now when restarting to update, it appears TWRP always and installation fails. So i don't know why in the other phone TWRP disappeared twice and how to update the phone (it can be restarted and works ok with old version)
So can somebody write full tutorial for systemless root? I tried booting into recovery,but twrp logo just keeps flashing.What did i do wrong?
InfcBear said:
So can somebody write full tutorial for systemless root? I tried booting into recovery,but twrp logo just keeps flashing.What did i do wrong?
Click to expand...
Click to collapse
What do you want to accomplish? In order to uninstall the Youtube app, you need root
sergio.otero said:
What do you want to accomplish? In order to uninstall the Youtube app, you need root
Click to expand...
Click to collapse
i wanted to root it but i have twrp problem.
But i will wait for ota update
Code:
Hello,
Thanks for your information.
please kindly wait for the new software released soon, the problem is sovled.
Thank you for your patience.
InfcBear said:
i wanted to root it but i have twrp problem.
But i will wait for ota update
Code:
Hello,
Thanks for your information.
please kindly wait for the new software released soon, the problem is sovled.
Thank you for your patience.
Click to expand...
Click to collapse
You can follow my steps a few posts back. TWRP has to be flashed via SP Flash tool.
sergio.otero said:
You can follow my steps a few posts back. TWRP has to be flashed via SP Flash tool.
Click to expand...
Click to collapse
I did,but like i wrote. My problem is on twrp starting up.
I noticed something. Over night my phone used like 15℅ of battery,7℅ phone idle and 7℅ wifi. What is good app for monitoring which app doen't let phone to deep sleep? Did somebody check is there any weird connections that could potentaly spy us? @sergio.otero can you scan rooted phone for malicious stuff with AV?
As you can see,no deep sleep
Sent from my A101 using XDA-Developers mobile app
Related
Hello :laugh:,
I have an ZTE Grand Memo V9815 N5 Flagship Phone APQ8064 Quad Core 2G 16G Android 4.1.2 5.7inch from China, and i was wandering if anyone allready has found something to Root this device.
I have tried the standard superoneclick, but thats not working and crashes when in progress.:silly:
I want to root it, cause i need Google play on it. I have installed Google Services/Google Framework, and i can setup an account in Google Play, but after the account stuff Google Framework/Google Services/Youtube service/Google Play crashes constantly
So i contacted ZTE for support, but there is no Rom, or any update for this phone.
I googled some, and at some websites they wrote to Root the device, so its not crashing anymore.
Please help me to get Root on my phone, so i can install Google Play Store.
Thanks in Advance !!
Same problem
Hello Reppo,
I have the same problem. I am not able to root this fantastic phone ... I need to install Google Play on ti .. :crying:
Please advise me if you will find the rooting procedure for ZTE N5 Grand Memo.
Ciao!
Alfredo
alphredo said:
Hello Reppo,
I have the same problem. I am not able to root this fantastic phone ... I need to install Google Play on ti .. :crying:
Please advise me if you will find the rooting procedure for ZTE N5 Grand Memo.
Ciao!
Alfredo
Click to expand...
Click to collapse
I've root Grand memo. What's your specific problems? Did you install unofficial recovery and ADB drive?
HI 123sharon456,
I have no idea how to do it.
I just need procedure and also advice about where to find all the requested files.
Can you give me some advice?
Thanks!
123sharon456 said:
I've root Grand memo. What's your specific problems? Did you install unofficial recovery and ADB drive?
Click to expand...
Click to collapse
alphredo said:
HI 123sharon456,
I have no idea how to do it.
I just need procedure and also advice about where to find all the requested files.
Can you give me some advice?
Thanks!
Click to expand...
Click to collapse
1. Install driver
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check your device manager. If it looks like the image follows, it means your ADB driver does not been installed successful.
This is the successful status.
If you can't install ADB driver by automatic installation. You can install ZTE Join Me(mobile phone manager software), it will intall ADB.
2. Recovery
Extract it into any directory.
Click flashrecovery.cmd (antepenultimate) to this interface:
It will run automatically and reboot your phone. If not, reboot your phone and computer, then try again.
If everything is fine, try to enter the recovery.
Shutdown the phone, pressing on volume key by right hand + pressing on power key by left hand. When you see the screen light up and feel the vibration, release the power button. KEEP PRESS ON VOLUME KEY until you see the recovery interface.
-upgrade your system from SD card
-use slideload to upgrade your system
-wipe out data/restore the factory data
-wipe out cache
-backup and restore
-mount and storage
-advanced options
-shutdown
Choose
-wipe out data/restore the factory data
-wipe out cache
and
-upgrade your system from SD card (copy this ROOT ROM in your SD card, and choose it in this step http://dl.xda-developers.com/attach...832b60d/5192289d/1/9/6/1/1/6/8/rootforN52.zip)
LOOK LUCK
123sharon456 said:
1. Install driver
Check your device manager. If it looks like the image follows, it means your ADB driver does not been installed successful.
This is the successful status.
If you can't install ADB driver by automatic installation. You can install ZTE Join Me(mobile phone manager software), it will intall ADB.
2. Recovery
Extract it into any directory.
Click flashrecovery.cmd (antepenultimate) to this interface:
It will run automatically and reboot your phone. If not, reboot your phone and computer, then try again.
If everything is fine, try to enter the recovery.
Shutdown the phone, pressing on volume key by right hand + pressing on power key by left hand. When you see the screen light up and feel the vibration, release the power button. KEEP PRESS ON VOLUME KEY until you see the recovery interface.
-upgrade your system from SD card
-use slideload to upgrade your system
-wipe out data/restore the factory data
-wipe out cache
-backup and restore
-mount and storage
-advanced options
-shutdown
Choose
-wipe out data/restore the factory data
-wipe out cache
and
-upgrade your system from SD card (copy this ROOT ROM in your SD card, and choose it in this step http://dl.xda-developers.com/attach...832b60d/5192289d/1/9/6/1/1/6/8/rootforN52.zip)
LOOK LUCK
Click to expand...
Click to collapse
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Dear Sharon,
The link is broken for the RootforN52
Can you please put a good link on it ?
shrewd supllice
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Im stucked at the Flashrecovery thing.
How do i open this adb folder, cause i dont have that one.
I have the ZTE Joinme installed, and now what?
Where do i find these recovery files, which i need to extract.
Please help me out, im kinda noobie in this stuff
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
where can i download unofficial recovery for grand memo
visarya said:
where can i download unofficial recovery for grand memo
Click to expand...
Click to collapse
you can find it here:
needrom.com/mobile/zte-n5/[/url]
I cant set the full link cause i did not more then 10 posts
Good!
took weeks breaking my head up late at night from surfing the net to find some way to rooting this stunning smartphone. But I've been stuck due to no knowledge of ADB commands and of course having no Chinese idea, since supposedly there's an app that automatically Root the phone, but I can not make it work.
Having my disability, I share with you all the information and resources I've got to give you hope someone knows the correct usage.
And it is a shame that a HIGH terminal does not remove all power performance not ROOT and therefore can not set you GAPPS
Web Recovery 4.2.2 ROM and instructions: w w w needrom com/mobile/zte-n5/ (Requires registration, but I am uploading files to my Dropbox so it is not necessary)
* Chinese Subforum: w w w zhongxingfans com/forum-560-1.html (Registration is required, I can spend my MP user you're needed)
* Chinese Tutorial on previous subforum: w w w zhongxingfans com/thread-51487-1-1.html
* Other Chinese Subforum: w w w popfen com/forum.php?mod=forumdisplay&fid=65&filter=typeid&typeid=167 (Same as above, I have also user)
*Another one: www gaojiquan com/forum-ZTEN5-1.html (I'm not registered, I think)
* DropBox folder with everything I've coseguido, even assuming the mobile program that automatically Root: w w w dropbox com/sh/ap64zaexa5sa8op/we9TXWX
* Future tutorials: h t tp : // es.ready2root.com/info/grand-memo-n5 (Now is empty)
[/ LIST]
Hope you have better luck than me, and if they have some known to speak Chinese would be helpful to us.
NOTE: These is a google traducction from a another post from a spanish forum, if you have problems with the links, you can go to the original post here: www . htcmania . com/showthread.php?t=664705
Found this on a chinese website, its not for root, but for better performance of the ZTE N5 :laugh:
Just translate the page with Google Chrome standard translator, and you will understand.
(im still not able to set full links )
link for website:
h t t p ://sjbbs. zol .com.cn/164/642_1635239 .html
link for download:
h t t p://devicedownload .zte. com.cn/cn/UpLoadFiles/product/0/242/soft/2013052815114637 .zip
Im still having the issue that i cannot install GOOGLE PLAY, anyone here that solved that problem???
I appreciate your help
Greets,
Reppo1911
How did you install cwm on zte v9815 please?
CCR
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Hello,
Is there some lock in EU phones whereas at the end of the aforementioned process the phone does shutdown and remains, the terminal is waiting for device..., rebooting in system recovery cwm is still missing and every sideload fails, any clue? People on the River would be Happy to give from a remote location.
hxxp://postimg.org/image/42tvojjvh/
ps: all I obtain is this->hxxp://postimg.org/image/blbyq6khf/332da320/
Freedom and Democracy shouldn't mean being jailed within some digital cell while paying for acquiring it: Amendments.
Can anyone give detailed directions?
I just got the device. I tried installing a google play store apk (tried a few different versions) all installed but none work.
How can I install the play store? Do I have to root the device? If so, are there detailed (English) instructions somewhere?
Someone knows if the Mobileuncle MTK Tools can root zte v5? I need to find a" one-click" app...
Partial success
I have installed the rom from needrom for the N5 android v 4.2.2. Took a while to flash the recovery, which is in chainese (driver issues). But still have serious connections issues:
The 3G network disconnects on restart and takes forever to reconnect. Wifi doesn't work! Built in keyboard is awful and also... chainese!
But it is rooted and has the google apps.
Does any one recommend a better combination of recovery and rom?
This is my wife's phone and she is having a lot of trouble with it.
Monsanto
yanay zimran said:
I have installed the rom from needrom for the N5 android v 4.2.2. Took a while to flash the recovery, which is in chainese (driver issues). But still have serious connections issues:
The 3G network disconnects on restart and takes forever to reconnect. Wifi doesn't work! Built in keyboard is awful and also... chainese!
But it is rooted and has the google apps.
Does any one recommend a better combination of recovery and rom?
This is my wife's phone and she is having a lot of trouble with it.
Click to expand...
Click to collapse
How do you flash a Custom rom we cannot even install cwm?
I wrote the Valorous Chinese told me to ask somebody elsee hence I sorry under God shall wish China a Genuine Bankruptcy for denying us Private Property, Communism is a mental disease our Lord should Treat. hxxp://en.wikipedia.org/wiki/Orange,_Vaucluse
How to?
JPWK said:
How do you flash a Custom rom we cannot even install cwm?
I wrote the Valorous Chinese told me to ask somebody elsee hence I sorry under God shall wish China a Genuine Bankruptcy for denying us Private Property, Communism is a mental disease our Lord should Treat. hxxp://en.wikipedia.org/wiki/Orange,_Vaucluse
Click to expand...
Click to collapse
I Followed downloaded the files from the dropbox posted upper in this thread. and followd the instructions in the previous page. Pay special attention to installing the driver for the divice. As soon as it reboots into bootloader it requires another driver.
Also if you must not restart the phone before flashing the rom otherwise it won't last.
perfect aarmewdd um in slack
yanay zimran said:
I Followed downloaded the files from the dropbox posted upper in this thread. and followd the instructions in the previous page. Pay special attention to installing the driver for the divice. As soon as it reboots into bootloader it requires another driver.
Also if you must not restart the phone before flashing the rom otherwise it won't last.
Click to expand...
Click to collapse
I am very Confident Folks bould ask ya about this driver thus they can rush downloading it like gold diggers to the root Saint Cloud very much
postimg.org/image/n6bj2rgyd/
DISCLAIMER: all operations descripted here should be done *only* by trained & expert guys... as every "hacking" operations, they involve the risk of soft/hard bricking your device making it unusable temporary or permanently. I will not be responsable in any way for it. So, pay attention and, if not sure, simply don't do it.
WARNING #1: this is a fast guide describing needed steps and providing needed files only for expert guys. It is *not*suitable* for newbies who need detailed instructions on how to install drivers, programs, flash partitions, etc...
WARNING #2: on this phone there are (strangely...) close ties between boot.img and recovery.img content. This involves that changing contents of recovery.img can produce bootloop and changing contents of boot.img can prevent to access recovery too, creating a soft brick condition. I don't know exactly why, BUT you are warned.
WARNING #3: the procedure and files provided are *only* for ROM1 firmware version 14 of 13 Aug 2016. It is indicated as OUKITEL_C4_V14.0_20160813 in "About phone" and as t637d-oq-s08-fdd3m-hd-64g8g-sd internally. If you are on a differently indicated version and/or release date, *don't*even*think* about trying to apply the provided files: bootloops and (at least) soft bricks are easy coming, expecially because of warning #2...
WARNING #4: all provided files are in .zip format only due to forum rules and limitations. They *all* need to be *unpacked* before use them.
CREDITS: this TWRP recovery has been compiled by Jemmini on 4PDA forum. Since of the Russian only language of that forum and the very hard way to subscribe on it for not Russians (needed to download files too...), I'm reporting it here with more explanations and my hints & experiences too...
Said that... Let's start! :highfive:
IF (and *only* if...) your firmware version is reported as OUKITEL_C4_V14.0_20160813 in your phone, these are the steps to follow:
- unlock your bootloader (no special code needed, just enable the apposite option slider in Developers section of Settings and unlock it by the standard fastboot command in fastload mode... you need adb, fastboot and adb/fastboot drivers installed in your pc obviously )
Please remember that, as ever, unlocking your bootloader will factory reset your phone (and void your warranty...), so take it in proper account....
- using SP Flash Tool (recent versions since of the new MT6737 used in C4... tested one is the v.5.1644, just Google for it) just flash the provided twrp-c4.img (by Jemmini on 4PDA) selecting "Download only" on top, using the provided scatter file and selecting only the recovery row (browsing to twrp-c4.img file). Then press Download button and connect your phone in OFF status. If all was OK and you have MTK drivers properly installed (Google for them... search for MT6737 drivers. To test them just try to connect your phone to PC as storage to check if it is properly seen...), you should see a green checking sign "v" on top of SP Flash tool.
If nothing happens, try to reinstall drivers and/or doublecheck your phone is in OFF status when connected.
- don't try to boot to system now. It simply doesn't anyway.
For some unknown reason connected to warning #2, flashing twrp introduces a bootloop (soft brick...) on this phone.
Nothing to be worried of anyway: systemless rooting will fix it!
To root simply flash by TWRP (yes, you need to enable /system modification on first twrp boot...) SuperSU v.2.78 "standard" version in zip format (just Google for it...).
For standard is intended the released one, not SRx or "forced to system" one... (tested version is SuperSU-v2.78-201609011115.zip) .
Just remember that, since of unability to boot system before flashing SuperSU, its zip have to be already on your device before flashing TWRP. Otherwise you can use a microSD card to flash from it...
If you do all fine you now have your rooted & TWRP 3.0.2-x provided Oukitel C4!!! :highfive:
If you are in a bootloop condition you aren't able to fix, just turn off your phone and, ever using SP Flash Tool in the same way, simply reflashing stock boot.img and recovery.img (both provided as zipped-to-to-be-unzipped attachment for... emergency reasons ).
After, if you want, you can install Xposed (in system mode) or busybox by app (it will be automatically installed in systemless mode since of supersu installation method...).
Don't even try to install Magisk v.9 instead: it will not work and will produce a soft brick (with no recovery access too...) that will requires a boot.img and recovery.img reflashing to be solved (with all this procedure to be redone one more time...).
This said... if you have questions... I'm here to answer them. Otherwise... have a nice time with your TWRP provided and systemless Rooted Oukitel C4!!! :fingers-crossed:
Reserved. :silly:
Can you please provide the 4PDA forum link of TWRP for this phone? Thanks for your post anyways
[email protected] said:
Can you please provide the 4PDA forum link of TWRP for this phone? Thanks for your post anyways
Click to expand...
Click to collapse
Added in OP. Don't expect to find more anyway...
I can confirm that this TWRP build also works fine with the newest OUKITEL_C4_V17.0_20161124 Firmware. Important: before flashing TWRP disable your boot lock code, otherwise you will softbrick your device.
Entec do you have an 4pda Account? If yes it would be really awesome if you could add the second TWRP recovery image for oukitel phones with the Rxx_xxxx ROM to OP.
EDIT:
I successfully installed XPOSED on my C4! This rocks the **** out of an 50 EUR budget phone!
Hello thank you for your information, could you provide us also TWRP for 32bits version (R06), I have tried to download from de forum but file is not avalaible.
regards
salvarez01 said:
Hello thank you for your information, could you provide us also TWRP for 32bits version (R06), I have tried to download from de forum but file is not avalaible.
regards
Click to expand...
Click to collapse
We need someone with 4PDA Account....
However, have you tried to install the 64Bit rom? You can get the Stock 64 Bit Rom from needrom.com. I advise you to do the software update before flashing TWRP linked in this thread.
[email protected] said:
We need someone with 4PDA Account....
However, have you tried to install the 64Bit rom? You can get the Stock 64 Bit Rom from needrom.com. I advise you to do the software update before flashing TWRP linked in this thread.
Click to expand...
Click to collapse
Hello thank you I have flashed 64 bits Rom and updated to V17, now all OK with TWRP and SuperSU.
Seam 64 bits version more slow than R06, but OK.
Thanks.
Hello I have tried to use native sip editing the files in /system/etc/permissions but the option is not available in phone menu. Someone know how to activate?
Enviado desde mi Redmi Note 4 mediante Tapatalk
[email protected] said:
Entec do you have an 4pda Account? If yes it would be really awesome if you could add the second TWRP recovery image for oukitel phones with the Rxx_xxxx ROM to OP.
Click to expand...
Click to collapse
[email protected] said:
We need someone with 4PDA Account....
However, have you tried to install the 64Bit rom? You can get the Stock 64 Bit Rom from needrom.com. I advise you to do the software update before flashing TWRP linked in this thread.
Click to expand...
Click to collapse
I managed to create an account on 4pda.ru and downloaded twrp for all firmware versions!
Files are attached!
Use twrp_recovery_C4_V.zip if your phone uses the OUKITEL_C4_VXX.X_XXXXXXXX firmware (Tested with OUKITEL_C4_V17.0_20161124)
Use twrp_recovery_R0x.zip if your phone uses the R0X_XXXXXX firmware. (Tested with R06_102033)
Where is OUKITEL_C4_V17.0_20161124 firm now?
I can't find it at needrom.com.
pop003 said:
Where is OUKITEL_C4_V17.0_20161124 firm now?
I can't find it at needrom.com.
Click to expand...
Click to collapse
Which rom do you have on your device?
Now I have R06_102033 on my C4
pop003 said:
Now I have R06_102033 on my C4
Click to expand...
Click to collapse
No problem, just use the twrp_recovery_R0x.zip from my previous post.
https://forum.xda-developers.com/showpost.php?p=71584701&postcount=10
[email protected] said:
No problem, just use the twrp_recovery_R0x.zip from my previous post.
https://forum.xda-developers.com/showpost.php?p=71584701&postcount=10
(do not forget to give it a like)
Click to expand...
Click to collapse
Thank you. twrp_recovery_R0x installed successfully.
However, in my environment, I needed the latest version of SP_Flash_Tool_v 5.1712_Win.
With other versions of sp_flash_tool, I did not succeed any number of times.
pop003 said:
Thank you. twrp_recovery_R0x installed successfully.
However, in my environment, I needed the latest version of SP_Flash_Tool_v 5.1712_Win.
With other versions of sp_flash_tool, I did not succeed any number of times.
Click to expand...
Click to collapse
Glad to hear it worked!
salvarez01 said:
Hello I have tried to use native sip editing the files in /system/etc/permissions but the option is not available in phone menu. Someone know how to activate?
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
You can configure SIP by using an App called Activity Launcher.
Download and Install Activity Launcher
Start Activity Launcher
Choose 'All Activities'
Search for 'Phone'
Open 'Phone'
Search and Click 'Sip Settings', 'com.android.phone.services.telephony.sip.SipSettings'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, yes I know this app to find secret menu. With this you can configure sip settings but when you try to make a call the dialer not offer choice to select calls with sip account
Enviado desde mi Redmi Note 4 mediante Tapatalk
salvarez01 said:
Hello, yes I know this app to find secret menu. With this you can configure sip settings but when you try to make a call the dialer not offer choice to select calls with sip account
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
After you added an Sip account you can choose you default dailing method as follows: Dailer -> Settings -> Accounts -> Dail With
You also see your SIP account as "additional SIM Card" when Opening the dailer!
Thank you!
This tool is out of date. See the main R9S thread for an updated tool by Wu Xianlin which gives you an improved TWRP recovery and access to more ROMs.
Original post is below for historical purposes only.
Oppo R9S (Chinese version) TWRP installation tool
Only works on Chinese OS release 005 which can be downloaded here and flashed in stock recovery.
Earlier versions will not work, nor will later versions. It has to be this specific version.
P̶r̶o̶b̶a̶b̶l̶y̶ doesn't work on international editions either.
DOWNLOAD - R9S_TWRP.zip - V1.01
DOWNLOAD - R9S_TWRP.zip - V1.0
Changelog
1.01 - Tweaked timings to try and improve success rate
1.01 - Changed how text is output to hopefully improve appearance on Windows 7
This script uses an exploit by Chinese developer Wu Xianlin to gain temp root, then it flashes his TWRP build that works on the R9S despite the locked bootloader.
From there you can attempt to perma-root your phone, install a custom ROM etc. etc.
Thanks to the following XDA members, without whom this would not have been possible:
jacksmack
celoxocis
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Antivirus issues
Some AV's may complain about this file containing a Trojan. They are technically correct. It's called "dirtycow" and is being used in the wild to hack into Linux systems. It cannot affect Windows systems, but I use it to hack a linux-based system (your phone)
If your AV refuses to let my script run you will have to disable it temporarily. Feel free to read through my script (root1.bat) to check what it is doing.
Useful things to flash in TWRP
CyanogenMod13 - by Wu Xianlin
Stock Recovery - by Wu Xianlin
GApps (ARM64) - by opengapps.org
Updated basebands, ripped from ColorOS
Use these only if you have issues with phone/GPS/etc. after installing CM. Otherwise leave alone.
[2017-01-11 v0180] - released ROM (China) - by me!
[2017-01-24 v1470] - ALPHA ROM (China) - by me!
Note: The version number on basebands stays the same, but the MD5s are different. No idea what has changed, but they work!
Unbrick instructions:
Does not work in Windows 10. Tested working in Windows 7
Download this unbrick package
Install the quallcommmtkdriver package
Run daanav-enabler as administrator
Run msmdownloadtool as administrator
Click through any timeout error you get
Click on the titlebar of MSMDownloadTool and press F6 to enable the options
Fully power down your phone by holding vol-, vol+ and power for 10 seconds
Hold vol- and vol+ while connecting the USB cable (use the stock Oppo cable)
MSM should now show your phone.
Press F5 to decide what to flash. For the first attempt choose "All except userdata".
Click the start button.
After 5 minutes your phone should reboot into ColorOS.
If ColorOS hangs on boot, then repeat the above staps and this time flash all, including userdata. This will wipe your photos etc. sorry!
This will leave you on V004 of the OS. You will need to upgrade to 005 before attempting to root again.
Can I request a version of this that stops at permanent rooting? Unless you think there would be a problem with the fact that I intend on using it on a r9s plus.
Or a link to what I maybe overlooked, in case it already exists.
Unfortunately this program doesn't perma-root. It gains a temp root and uses that to flash TWRP. TWRP can then be used to flash a custom ROM or a rooting tool.
It also doesn't unlock the bootloader. Wu Xianlin somehow managed to make a version of TWRP that the locked bootloader is happy with!
however if you edit root1.bat and scroll down to line 181. Change it from:
Code:
type root3.txt | adb shell /data/local/tmp/root2.sh
to:
Code:
adb shell /data/local/tmp/root2.sh
Then the script will just drop you to a root shell. Unfortunately you are then on your own as to how you get perma-root.
I have no idea whether this method will work on the R9SPlus. In theory it should do but I've not tried it. I won't be held responsible if you brick your phone and probably won't be able to help, though you should be able to do a three-finger reboot and then boot into recovery and reflash ColorOS.
Optional modifications you can make that will make the script neater:
You can also remove lines 178 and 179
Code:
echo Copying TWRP
adb push r9s-twrp-3.0.2.0-20170107.img /sdcard/twrp.img
and change line 184 from
Code:
pause
REM ---- CHINESE TWRP HELP ----
to
Code:
pause
exit
REM ---- CHINESE TWRP HELP ----
I will take your "I have no idea if this will work fo r9s+" at face value and try to be patient for something more certain, thanks for your contribution nonetheless
I saw the translation you posted and am a bit depressed Wu recommended to return the phone...
Oppo make amazing hardware but terrible software that is never updated. I used to be ok with this because they actively encouraged rooting and custom ROMs but this change in attitude from them makes it very hard to recommend the phone.
I would be interested to know if this exploit does gain root on the Plus. In theory it should work, and there's also a decent chance that TWRP will too as the hardware is very similar, but will require someone very brave/stupid to try it
BTW. Anyone who is going to try this on the Plus. Ensure you have a flashable .ozip of a working ColorOS (full install, not OTA) saved to internal storage as the stock Oppo recovery is a POS that doesn't provide ADB, MTP or USB.
If you end up wrecking your OS and don't have that image in place ready to flash from recovery you are screwed.
Likewise do not flash TWRP until you are sure that your OS is still bootable, and also take a dump of the stock recovery first! (and post it in the other thread as it's bloody useful to have!)
Sent from my OPPO R9s using XDA Labs
Hi the Unbrick pack RAR is corrupted and can not unzip.
Also there is Trojan in DOWNLOAD - R9S_TWRP.zip - V1.0 - Dirtycow file and the NOD Antivirus is deleting this file.
Please advice how to proceed ?
NOD is correctly detecting that this is a hacking tool using a well known exploit (dirtycow).
Since you actually want to do that, you're going to have to disable NOD until you're done.
Sent from my OPPO R9s using XDA Labs
Lum_UK said:
NOD is correctly detecting that this is a hacking tool using a well known exploit (dirtycow).
Since you actually want to do that, you're going to have to disable NOD until you're done.
Sent from my OPPO R9s using XDA Labs
Click to expand...
Click to collapse
Hi I got to somewhere but I am stuck now...
Please check the pic and advice how to install the CyangenMode. (I have uploaded the pic in your thread in Oppo Community forum please check it there because I am new here and can not post with external links..)
Sorry for the inconvenience. Looks like I am few steps away to finish the job but something is missing...
Goro1234’s image: http://s27.postimg.org/8usudi9g3/IMG_20170207_133854.jpg
You need to do a wipe data/cache/dalvik as CM won't install on top of incompatible data.
Note that this will wipe your installed apps, settings, app data, saved games etc. but will not wipe your photos, music, downloads or anything else saved to internal storage.
You may wish to take a backup from within TWRP first. Apps like Titanium Backup and Nandroid Manager are reasonably good at restoring apps and data from a TWRP backup.
Also don't forget to install GApps
Sent from my OPPO R9s using XDA Labs
For the unbrick package you need 7-Zip to extract it.
Lum_UK said:
`Also don't forget to install GAaps`
Hi I am on Cyanogen now !!! Thanks for the help. Can you please tell me now which is the correct gapps version for our device. I have installed random one which does not make connection with google. I have tried to install ARM 64, but cant flash because systems says that is incompatible... Thanks
Click to expand...
Click to collapse
Select ARM64, android 6.0 and whichever variant you like (I recommend the Pico version)
Sent from my OPPO R9s using XDA Labs
Sorry for the English, I made a mess with the phone, after unlocking everything, and held the phone for several days with CM13, I saw that GPS was not working, so vovelo return to the origin, but now I can not installing Stock Recovery more to put the stock rom, I tried to do unbrick, but when I press start of msmdownloadtool, the program stops and closes. If some kind soul gives me some advice. Done everything under win 7 reset. Thank you so much Gianfranco.
GPS should be working. I'm using it all the time on CM13 as my phone is my satnav.
Maybe wipe and reflash, or try one of the baseband updates?
Sent from my OPPO R9s using XDA Labs
Now, the problem is more to do so that I can not leave,
I installed through the files Stock TWRP Recovery as a boot, and I hand the boot source and installing the original rom, after the reboot remains on oppo screen. what can I do. Thank you so much Gianfranco.
hold all three buttons for 10 seconds to forceibly power off the phone and then try to boot to recovery.
If you get the Oppo recovery then try to do a factory reset and then flash the stock ROM,
if you get TWRP then try to flash Cyanogen.
If you can't do either then you're going to have to run the unbrick tool. Do you have another PC you can try it on?
Thanks, but I have tried various solutions, when I install the boot ROM from stock, is successful, the reboot hangs installation applications. I wanted to know if you can other software for unlocking. Thank you very much for giving me some advice, thanks ancora.Gianfranco.
Paylib Société Générale - Rooted / Unlocked bootloader phone & how to make it work
This is a guide only for French users of the Société Générale Bank, in order to make the Paylib app work with a rooted/unlocked phone.
When launching, the app can display "Cette application est incompatible avec votre téléphone" on the basis it is rooted or unlocked.
I made the app work using Magisk 13.2B on a ZTE Axon 7
- Enable Magisk & Magisk Hide
- Hide the following apps (fewer may be required, it just works as-is for now)
> Android Services Library
> Android SHared Libary
>Gestionnaire de comptes Google (com.google.gsf.login)
>Google Play Store
> mobi.societegenerale.mobile.hce.sghce (com.societegenerale.paylibsanscontact)
> Shell
>Société Générale (if you have the app installed - mobi.societegenerale.mobile.lappli)
There it is, enjoy
I'm trying to do the same with OnePlus 3 with Oreo and for PayLib solution by Banque Populaire (fr.banquepopulaire.ccmp).
Without success...
I've got :
- OP3
- OxygenOS 5.0
- Android 8.0.0
- Magisk 14.5
And I've tried with hiding the following :
- Banque Populaire Cyberplus (fr.banquepopulaire.cyberplus)
- Paiement mobile (fr.banquepopulaire.ccmp)
- and like you,
--- Android Shared Library (com.google.android.ext.shared)
--- Android Services Library (com.google.android.ext.services)
--- Google Play Store (com.android.vending)
--- Shell (com.android.shell)
I don't have the Gestionnaire de compte (com.google.gsf.login)
Is it still working with your phone with Société Générale ?
apollonaute said:
I'm trying to do the same with OnePlus 3 with Oreo and for PayLib solution by Banque Populaire (fr.banquepopulaire.ccmp).
Without success...
I've got :
- OP3
- OxygenOS 5.0
- Android 8.0.0
- Magisk 14.5
And I've tried with hiding the following :
- Banque Populaire Cyberplus (fr.banquepopulaire.cyberplus)
- Paiement mobile (fr.banquepopulaire.ccmp)
- and like you,
--- Android Shared Library (com.google.android.ext.shared)
--- Android Services Library (com.google.android.ext.services)
--- Google Play Store (com.android.vending)
--- Shell (com.android.shell)
I don't have the Gestionnaire de compte (com.google.gsf.login)
Is it still working with your phone with Société Générale ?
Click to expand...
Click to collapse
ouais ouais, same for me...
Banque Pop. Paiement Mobile used to work, until yesterday.
Since the payment app has been updated (to v1.4.0), it detects root and does not start, even after hiding the recommended apps & gapps, disable USB debugging...
Tested with Magisk 14.0.
I will try to hide some other apps, but Paiement Mobile might detect other apps requiring root (such as Titanium Backup or the like)
fred.lyon said:
ouais ouais, same for me...
Banque Pop. Paiement Mobile used to work, until yesterday.
Since the payment app has been updated (to v1.4.0), it detects root and does not start, even after hiding the recommended apps & gapps, disable USB debugging...
Tested with Magisk 14.0.
I will try to hide some other apps, but Paiement Mobile might detect other apps requiring root (such as Titanium Backup or the like)
Click to expand...
Click to collapse
Funny that Pokémon Go and other apps like that didn't do the same trick to detect root, and Banque Populaire app with 10k users (play store said) succeed detecting root.
Finally, I made it. Here are the steps that worked for me:
1. check if RootBeer Sample can detect root --> yes (su & busybox)
2. flash Busybox-cleaner found here
3. install Magisk module "Busybox for Android NDK"
4. check if RootBeer Sample can detect root --> no :victory:
5. deactivate Apps2SD; don't know why, but this app or its scripts allow "Paiement mobile" to detect root
Several other apps using root could help payment apps to detect root.
Great! Now I can use this sh..ty app that works once every 5 trials... :silly:
fred.lyon said:
Finally, I made it. Here are the steps that worked for me:
1. check if RootBeer Sample can detect root --> yes (su & busybox)
2. flash Busybox-cleaner found here
3. install Magisk module "Busybox for Android NDK"
4. check if RootBeer Sample can detect root --> no :victory:
5. deactivate Apps2SD; don't know why, but this app or its scripts allow "Paiement mobile" to detect root
Several other apps using root could help payment apps to detect root.
Great! Now I can use this sh..ty app that works once every 5 trials... :silly:
Click to expand...
Click to collapse
I followed your steps without success. I don't have Apps2SD but Lucky Patcher (more or less the same intrusive ODEX modifier/patcher).
Nevermind, I'm still searching the app/tool which blocks that Paiement Mobile sh**ty app.
apollonaute said:
I followed your steps without success. I don't have Apps2SD but Lucky Patcher (more or less the same intrusive ODEX modifier/patcher).
Nevermind, I'm still searching the app/tool which blocks that Paiement Mobile sh**ty app.
Click to expand...
Click to collapse
I succeeded to identify Apps2SD as troublemaker by symply deactivating it with TitaniumBackup. All the following apps (for rooted devices) are installed on my phone and none of them prevent the Paylib app to start:
- ROM Toolbox
- SD Maid
- Root Explorer
- Apps Ops
- Betterbatterystats
- Aurostarts
- Adaway
Hope it will shorten the list of apps to test.
Here the image of my RootBeer Sample app. What about yours?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://ibb.co/d10xn6
apollonaute said:
Here the image of my RootBeer Sample app. What about yours?
https://ibb.co/d10xn6
Click to expand...
Click to collapse
Mine is now green for all categories.
Yours is looking like mine before making a fresh réinstallation of Magisk, cleaning busybox and reinstalling it as a Magisk module.
Are you sure Magisk Hide is working for you? What's going on when you install Root Checker (by App Hippie), hide it in Magisk and then run the app again?
My mistake. I didn't hide RootBeer. Now I've hide it. And now almost everything is green checked. Except "potentially dangerous app".
So I need to find out which one breaks the root. Or at least makes other apps discover root.
I've tried with Root Check, with Magisk Hide and it works.
Edit : ok, with some app removed, now RootBeer is all green. But root is still detected by Paiement Mobile by Banque Populaire. F***ing app...
Hi I'm also trying to install paylib and have same problem. tried to hide modules with magisk didn't work... any help ? thanks
edit : I'm using ma ctre, app fo crédit agricole with a paylib part in it
Hello,
It works good with my device (Sony Xperia Z, LineageOS 14.1). I disabled "USB debug" in developer options and hide apps mentioned in the first post (MaBanque and MaCarte apps instead of SocieteGenerale ones).
Hello !
It works on my S9 with the Banque Populaire app, but if I activate the xposed framework, the app detects root.
Does someone have an idea ?
Thanks
Mati24 said:
Hello !
It works on my S9 with the Banque Populaire app, but if I activate the xposed framework, the app detects root.
Does someone have an idea ?
Thanks
Click to expand...
Click to collapse
Hello,
The BP app used to work up to its version 1.4.0 ("Paiement mobile" app).
At that time, the trick was to install this specific app version (from TitaniumBackup) without Xposed and XposedInstaller (but with proper config in MagiskHide), then make the registration process in the app (code received via SMS). After such an installation, reinstalling XposedInstaller and enabling Xposed framework in Magisk wasn't preventing from running the app; contactless payments were really working fine!
But this is no more possible with the latest version 1.5.0, which is detecting Xposed as soon as it's starting.
Moreover, since 1 week, the app 1.4.0 is requiring an update to 1.5.0, so previous method is no more working
I'm afraid we'll have to choose between this app and Xposed...
I'll try to find a workaround, but I'm a newbie, just able to follow tutos :silly:
If we're lucky :fingers-crossed:, we'll find a french developer also using one of Paylib applications for banks :laugh:
hi guys, since magisk 18 I can no longer hide from "Android SHared Libary", so application ma carte (crédit agricole) detects the root, has anyone found a solution?
oufouf84 said:
hi guys, since magisk 18 I can no longer hide from "Android SHared Libary", so application ma carte (crédit agricole) detects the root, has anyone found a solution?
Click to expand...
Click to collapse
Hello, I'm on magisk 19.3.. I just tried to install "ma carte" application from C.A. and the appli was refusing due to root ..bla bla bla even if Ma carte and my banque were hide in the magisk. So I've hidden also "Services Google paly" and it works... I just need to try now to pay something to be sure but at tleast no more root detected by the Ma Carte appli. Good luck !!
lorenzo_29 said:
Hello, I'm on magisk 19.3.. I just tried to install "ma carte" application from C.A. and the appli was refusing due to root ..bla bla bla even if Ma carte and my banque were hide in the magisk. So I've hidden also "Services Google paly" and it works... I just need to try now to pay something to be sure but at tleast no more root detected by the Ma Carte appli. Good luck !!
Click to expand...
Click to collapse
hi lorenzo,
Can you give me list of what you put in magisk hide?
thank
oufouf84 said:
hi lorenzo,
Can you give me list of what you put in magisk hide?
thank
Click to expand...
Click to collapse
Yep..Alors, I've got quite a lot of app declared but the one that I've selected under Magisk hide are the one related to google and Paylib:
- Service Google Play (com.google.android.gms) ==> 10 sub folders within this app.
- Ma Banque (fr.creditagricole.androidapp) ==> 2 sub folders within this app
- Ma Carte (fr.creditagricole.macarteca) ==> 2 sub folders within this app
- Google (com.google.android.googlequicksearchbox:search....) ==> 13 sub folders within this app
- Drive (com.google.android.apps.doc) ==> 4 sub folders within this app
I don't think the two latest one on this list are related to paylib root issue but more probably the app Services Google Play.
I've red somewhere that paylib app was looking at the android OS to check if the android smartphone is rooted or not.
Hope it will help you.
lorenzo_29 said:
Yep..Alors, I've got quite a lot of app declared but the one that I've selected under Magisk hide are the one related to google and Paylib:
- Service Google Play (com.google.android.gms) ==> 10 sub folders within this app.
- Ma Banque (fr.creditagricole.androidapp) ==> 2 sub folders within this app
- Ma Carte (fr.creditagricole.macarteca) ==> 2 sub folders within this app
- Google (com.google.android.googlequicksearchbox:search....) ==> 13 sub folders within this app
- Drive (com.google.android.apps.doc) ==> 4 sub folders within this app
I don't think the two latest one on this list are related to paylib root issue but more probably the app Services Google Play.
I've red somewhere that paylib app was looking at the android OS to check if the android smartphone is rooted or not.
Hope it will help you.
Click to expand...
Click to collapse
thank you lorenzo I try, the last two are cloud and search bar so I'm not error
oufouf84 said:
thank you lorenzo I try, the last two are cloud and search bar so I'm not error
Click to expand...
Click to collapse
I've tried the app this afternoon and it doesn't work in fact. The app is blocked due to root.. Sorry about the wrong info.
Hello everyone,
I got z17 miniS several months ago, but I hate the original ROM, no Gapps, no notification, … I’m a newbie on Android (my previous phone is windowsphone), so I don’t know well any things about Android, root, …
I’ve searched on internet many times & found some ways to install Gapps, TWRP, ROM for this phone, almost them from chinese forum. Because the link download on baidu server so I re-up them to another server.
In this thread, I will guide you root, install twrp, Gapps, … to z17miniS, it worked with my phone. Hope it works for you.
Carefully with all you do. Please always backup.
Links download:
Nubia emergency Tool V1.1.4: https://www.up-4ever.com/io2mab10hl1v
Zte-handset-usb-driver-5.2066.1.11: https://www.up-4ever.com/lgr8tdrr5vaj
Nubia_Z17_mini_twrp_root_pack: https://www.up-4ever.com/v8snlmbh75df
TWRP_recovery-3.2.2_NX589J: https://www.up-4.net/wa89whiahgl4
nubiaz17miniS-beta1-twrp: https://www.up-4.net/c86atyqd8sui
ROM NX589J:
NX589_V210_update: https://www.up-4ever.com/osu00tfe6koj
NX589_V212_update: https://www.up-4ever.com/dk6dbxlmo07e
NX589-V216-update: https://www.up-4ever.com/jmoled2gd282
NX589J_V2.16_2018.01.09: https://www.up-4ever.com/01t4o8eh5unb
NX589_V217_update: https://www.up-4ever.com/gxkex20t4or3
flyme6_NX589J_136fei_6.8.2.10R: https://www.up-4ever.com/8davy47ryz6f
flyme6-Root: https://www.up-4ever.com/0cx7b97v2q4s
flyme_NX589J_136fei_6.8.3.29R-root: https://www.up-4ever.com/xa3qvgsyc8ah
NX589J-ENCommonV1.01: https://www.up-4ever.com/27gya085krcw
NX589J-EN-1.04: https://www.up-4.net/cw3odzxnzb1b
NX589J-V3.04 CN Original: https://www.up-4.net/na7s02qe9nty
Mokee free version: https://www.up-4.net/w15h1p2pvlwa
Rom mod from CN3.04: https://www.up-4.net/mm0bqb7cuwt7
NX589J-V3.07 CN Original: https://www.up-4.net/9jha11t6eib6
NX589J-EN 1.06: https://drive.google.com/file/d/18tl7P9IWDJU0Day_zukPdHg8NQQY0ahz/view
NX589J_Z69_EN_UJH1N_V107: 2019/02/21: Please restore your phone to factory default settings after upgrade in order to make sure that software upgrade is valid: https://www.nubia.com/de/support.php?a=phone&pid=37Foreign
APP:
open_gapps-arm64-7.1-full-20180207: https://www.up-4ever.com/8q1z0y1dntp4
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
open_gapps-arm64-7.1-full-20180814: https://www.up-4.net/ba3m3u6ylb8e
Xposed Nubia by SY: https://www.up-4.net/ni0e4lnu1v51
1. Preparation:
- Charge Your Device.
- Backup Phone Apps, Contacts, SMS.
- Enable developer options: Go To Settings -> About Phone -> Tap On “Firmware Version” 7 Times To Enable Developer Options.
- Enable USB Debugging: Go To Your Preferences -> Advanced -> Developer Options -> Tick The “Usb Debugging” Checkbox.
- Enable OEM Unlock: Go To Your Preferences -> Advanced -> Developer Options -> Tick The “Oem Unlock” Check box
2. Install Nubia Driver: Zte-handset-usb-driver-5.2066.1.11
3. Install TWRP, root:
- Download the TWRP Recovery Flash Tool: Nubia_Z17_mini_twrp_root_pack, unzip it.
- Connect your phone to PC
- Run GizFlasher.bat
- Choose 2, then your device reboot to twrp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Change language to English
- Choose tools & Root device
Another TWRP: Run z17minis刷recovery.bat & choose 2 to install twrp.
4. Install Gapps:-
- Download open_gapps-arm64-7.1-full-20180207 and Flash the zip Via Twrp Recovery.
- Wipe Dalvik Cache and Reboot.
- Fix Google authorization is required Problem:
o Go To Setting -> Apps -> Force Stop and Clear Data Of (Download Manager, Google Play Store, Google Play Services, Google Services Framework, and Google Account Manager).
o Set up your Google Account again.
o Go to airplane mode, waitting ~5’
o Reboot The Device.
o Come to normal mode
5. Install ROM:
- Download ROM & copy it to internal storage
- Flash the zip Via Twrp Recovery.
Here I have 2 ROM cook:
- NX589J_V2.16_2018.01.09: From SY in chinese forum: I’m using that Rom, it’s ok, but it has T-setting in Chinese language I extract T-setting to change language but I cant. It also can install Xposed too
- flyme6_NX589J_136fei: I’ve just see this ROM, so I’ve not try it yet
- Rom EN 1.01: shared from NerekPL, I have not installed yet, but the review is ok, i saw the En version 1.04 but cant find link download
- Update ROM EN 1.04 from logosfp: Everything works great with EN_1.04 except... the problem with "always" pending downloads and installations in the Google Play
- Update ROM CN 3.04 from nubia
- Update rom cook CN 3.04 from cwz: fault at panorama camera.
- Update rom CN 3.07 from nubia
- Update ROm Mokee free version by fei
- Update rom EN 1.06
6. Install xposed:
you can install xposed for NX589J, but i think it cant help much.
- installer/ uninstaller xposed 3.1.5 apk from this forum
- install xposed framework in the link above: install through recovery.
Nguồn:
https://www.******.com/root-nubia-z17-install-twrp-gapps/
https://bbs.nubia.cn/thread-1158936-1-1.html
https://bbs.nubia.cn/thread-1184346-1-1.html
Nice work.:good::good::good:
I'll give a try.
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
T-setting's link is broken.
rsinet said:
Nice work.:good::good::good:
I'll give a try.
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
T-setting's link is broken.
Click to expand...
Click to collapse
I can go this normal @@
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
If not, pls tell me, i will reup this
Sent from my NX589J using Tapatalk
dhvminh said:
I can go this normal @@
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
If not, pls tell me, i will reup this
Sent from my NX589J using Tapatalk
Click to expand...
Click to collapse
Sorry. Now its working. Seems to be momentary.
---------- Post added at 03:10 AM ---------- Previous post was at 02:50 AM ----------
Do you know how to delete google account ?
I`m getting "This change is not allowed by your administrator."
rsinet said:
Sorry. Now its working. Seems to be momentary.
---------- Post added at 03:10 AM ---------- Previous post was at 02:50 AM ----------
Do you know how to delete google account ?
I`m getting "This change is not allowed by your administrator."
Click to expand...
Click to collapse
I dont know. But i think u can try removing account in app and using titanium to wipe app data.
Sent from my NX589J using Tapatalk
Thank you very much for the post, @dhvminh:
So far the community around Z17 miniS is small and there no so many ROMs available and users posting about this device, so any contribution is more than welcome.
Which ROM are you currently using? Is it working fine? Do you manage to get the settings in English?
I currently have chinese v2.10 with GApps in my phone but I'm quite disappointed for a number of reasons:
- Battery drains really fast. I have to put the device in "energy save" mode and even this does not make the battery work for more than 6/8 hours.
- I have problem with some Google services.
- Minor bugs when "sharing" things between apps or accessing to media from apps (change the profile picture in several apps doesn't work, for instance).
Is it worthy change to any of the ROMs you mentioned (and which one is the best so far) or it's better to wait until a international ROM is released (by the way, I can't not find it anywhere :crying
The phone looks quite good and the performance is great, as well as the camera but the problems I mentioned make the user experience quite frustrating. I want to believe that we will have improvements in the next months: the phone was released in October 2017 in China and it was just introduced in Europe. So, fingers crossed.
Thanks again.
logosfp said:
Thank you very much for the post, @dhvminh:
So far the community around Z17 miniS is small and there no so many ROMs available and users posting about this device, so any contribution is more than welcome.
Which ROM are you currently using? Is it working fine? Do you manage to get the settings in English?
I currently have chinese v2.10 with GApps in my phone but I'm quite disappointed for a number of reasons:
- Battery drains really fast. I have to put the device in "energy save" mode and even this does not make the battery work for more than 6/8 hours.
- I have problem with some Google services.
- Minor bugs when "sharing" things between apps or accessing to media from apps (change the profile picture in several apps doesn't work, for instance).
Is it worthy change to any of the ROMs you mentioned (and which one is the best so far) or it's better to wait until a international ROM is released (by the way, I can't not find it anywhere :crying
The phone looks quite good and the performance is great, as well as the camera but the problems I mentioned make the user experience quite frustrating. I want to believe that we will have improvements in the next months: the phone was released in October 2017 in China and it was just introduced in Europe. So, fingers crossed.
Thanks again.
Click to expand...
Click to collapse
Now, i'm using this ROM: NX589J_V2.16_2018.01.09. It is rom cook from chinese nubia forum, it changed something in system and can install xposed, ... But, something in setting are chinese, i cant change it to english ( Battery in my phone is ok with my using
U can try Morelocate apk to change ur language, but it is not change all text
What problem GG services do u have? I install open_gapps-arm64-7.1-full-20180207, so dont have any problem.
The flyme ROM just use only 1 sim, however i havenot try it yet.
Is it introduced in Europe? Hope it has international ROM. In discuss, i see the version EN ROM for NX589J, but scare to try ((
dhvminh said:
Now, i'm using this ROM: NX589J_V2.16_2018.01.09. It is rom cook from chinese nubia forum, it changed something in system and can install xposed, ... But, something in setting are chinese, i cant change it to english
Click to expand...
Click to collapse
Are there important settings in chinese?
dhvminh said:
Is it introduced in Europe? Hope it has international ROM. In discuss, i see the version EN ROM for NX589J, but scare to try
Click to expand...
Click to collapse
Do you know where this ROM is? What are you scared to try?
logosfp said:
Are there important settings in chinese?
Do you know where this ROM is? What are you scared to try?
Click to expand...
Click to collapse
This ROM Just added some tweak in setting (T-setting) in chinese language.
ROM EN here: https://forum.xda-developers.com/nubia-z17-mini/help/z17-mini-s-rom-t3758496/page2
I dont know where is the ROM, so i dont want to try
Do you mean NX589J-ENCommonV1.01 ? I just put it in mine. Works perfectly so far. No Gapps bugs, no air plane mode needed. I've just got it from DOT up-4everDOTcom / 27gya085krcw
rsinet said:
Do you mean NX589J-ENCommonV1.01 ? I just put it in mine. Works perfectly so far. No Gapps bugs, no air plane mode needed. I've just got it from DOT up-4everDOTcom / 27gya085krcw
Click to expand...
Click to collapse
) I just recently like rom cook. It's stable with some chinese [emoji3][emoji23][emoji23][emoji23]
Sent from my NX589J using Tapatalk
logosfp said:
- Battery drains really fast. I have to put the device in "energy save" mode and even this does not make the battery work for more than 6/8 hours.
Click to expand...
Click to collapse
Hi, so I found the best way to get decent battery life is to disable wifi (it literally took my phone from 6-8 hours up to a full day easily). I know this isn't ideal for some people and data plans, but while you're out and about, definitely disable the wifi.
Hello, I'm having problems when trying to unlock my device since it's not detected by my PC:
C:\Users\fpr\Downloads\Nubia\platform-tools
λ adb reboot bootloader
C:\Users\fpr\Downloads\Nubia\platform-tools
λ fastboot oem nubia_unlock NUBIA_NX589J
< waiting for any device >
Click to expand...
Click to collapse
USB Debugging and OEM Unlock options are enabled on my device. Any help?
logosfp said:
Hello, I'm having problems when trying to unlock my device since it's not detected by my PC:
USB Debugging and OEM Unlock options are enabled on my device. Any help?
Click to expand...
Click to collapse
1-Turn off your phone and conect the usb cable
2- go to device manager and you will see android warn driver.
3- install Zte-handset-usb-driver-5.2066.1.11
4- Right click in Android warn in device manager and choose update driver
5- choose second option, after second option too
6- choose adb ...... and voila !
diogoasisti said:
1-Turn off your phone and conect the usb cable
2- go to device manager and you will see android warn driver.
3- install Zte-handset-usb-driver-5.2066.1.11
4- Right click in Android warn in device manager and choose update driver
5- choose second option, after second option too
6- choose adb ...... and voila !
Click to expand...
Click to collapse
Thanks @diogoasisti
The Android warning is not shown when I have the phone plugged but turned off but it does when it's switch on.
Do you know which one of the ADB drivers do I have to install? Thanks
logosfp said:
Thanks @diogoasisti
The Android warning is not shown when I have the phone plugged but turned off but it does when it's switch on.
Do you know which one of the ADB drivers do I have to install? Thanks
Click to expand...
Click to collapse
look if you turn on debugging usb
I don't remember if was handset or single.
I think u should uninstall all the zte driver, restart and install it again
Sent from my NX589J using Tapatalk
Hi everyone. Does it have a possibillity to reset fastboot unlock counter?
Link download already dead
all link is dead
please fix it
daniel_hiruko said:
all link is dead
please fix it
Click to expand...
Click to collapse
Check ur connection pls.
All link is live
Sent from my NX589J using Tapatalk