Database Info

[Q] Need help with rooting ZTE N5 Grand Memo

Hello :laugh:,
I have an ZTE Grand Memo V9815 N5 Flagship Phone APQ8064 Quad Core 2G 16G Android 4.1.2 5.7inch from China, and i was wandering if anyone allready has found something to Root this device.
I have tried the standard superoneclick, but thats not working and crashes when in progress.:silly:
I want to root it, cause i need Google play on it. I have installed Google Services/Google Framework, and i can setup an account in Google Play, but after the account stuff Google Framework/Google Services/Youtube service/Google Play crashes constantly
So i contacted ZTE for support, but there is no Rom, or any update for this phone.
I googled some, and at some websites they wrote to Root the device, so its not crashing anymore.
Please help me to get Root on my phone, so i can install Google Play Store.
Thanks in Advance !!

Same problem
Hello Reppo,
I have the same problem. I am not able to root this fantastic phone ... I need to install Google Play on ti .. :crying:
Please advise me if you will find the rooting procedure for ZTE N5 Grand Memo.
Ciao!
Alfredo

alphredo said:
Hello Reppo,
I have the same problem. I am not able to root this fantastic phone ... I need to install Google Play on ti .. :crying:
Please advise me if you will find the rooting procedure for ZTE N5 Grand Memo.
Ciao!
Alfredo
Click to expand...
Click to collapse
I've root Grand memo. What's your specific problems? Did you install unofficial recovery and ADB drive?

HI 123sharon456,
I have no idea how to do it.
I just need procedure and also advice about where to find all the requested files.
Can you give me some advice?
Thanks!
123sharon456 said:
I've root Grand memo. What's your specific problems? Did you install unofficial recovery and ADB drive?
Click to expand...
Click to collapse

alphredo said:
HI 123sharon456,
I have no idea how to do it.
I just need procedure and also advice about where to find all the requested files.
Can you give me some advice?
Thanks!
Click to expand...
Click to collapse
1. Install driver
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check your device manager. If it looks like the image follows, it means your ADB driver does not been installed successful.
This is the successful status.
If you can't install ADB driver by automatic installation. You can install ZTE Join Me(mobile phone manager software), it will intall ADB.
2. Recovery
Extract it into any directory.
Click flashrecovery.cmd (antepenultimate) to this interface:
It will run automatically and reboot your phone. If not, reboot your phone and computer, then try again.
If everything is fine, try to enter the recovery.
Shutdown the phone, pressing on volume key by right hand + pressing on power key by left hand. When you see the screen light up and feel the vibration, release the power button. KEEP PRESS ON VOLUME KEY until you see the recovery interface.
-upgrade your system from SD card
-use slideload to upgrade your system
-wipe out data/restore the factory data
-wipe out cache
-backup and restore
-mount and storage
-advanced options
-shutdown
Choose
-wipe out data/restore the factory data
-wipe out cache
and
-upgrade your system from SD card (copy this ROOT ROM in your SD card, and choose it in this step http://dl.xda-developers.com/attach...832b60d/5192289d/1/9/6/1/1/6/8/rootforN52.zip)
LOOK LUCK

123sharon456 said:
1. Install driver
Check your device manager. If it looks like the image follows, it means your ADB driver does not been installed successful.
This is the successful status.
If you can't install ADB driver by automatic installation. You can install ZTE Join Me(mobile phone manager software), it will intall ADB.
2. Recovery
Extract it into any directory.
Click flashrecovery.cmd (antepenultimate) to this interface:
It will run automatically and reboot your phone. If not, reboot your phone and computer, then try again.
If everything is fine, try to enter the recovery.
Shutdown the phone, pressing on volume key by right hand + pressing on power key by left hand. When you see the screen light up and feel the vibration, release the power button. KEEP PRESS ON VOLUME KEY until you see the recovery interface.
-upgrade your system from SD card
-use slideload to upgrade your system
-wipe out data/restore the factory data
-wipe out cache
-backup and restore
-mount and storage
-advanced options
-shutdown
Choose
-wipe out data/restore the factory data
-wipe out cache
and
-upgrade your system from SD card (copy this ROOT ROM in your SD card, and choose it in this step http://dl.xda-developers.com/attach...832b60d/5192289d/1/9/6/1/1/6/8/rootforN52.zip)
LOOK LUCK
Click to expand...
Click to collapse
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not

Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Dear Sharon,
The link is broken for the RootforN52
Can you please put a good link on it ?

shrewd supllice
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Im stucked at the Flashrecovery thing.
How do i open this adb folder, cause i dont have that one.
I have the ZTE Joinme installed, and now what?
Where do i find these recovery files, which i need to extract.
Please help me out, im kinda noobie in this stuff

Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
where can i download unofficial recovery for grand memo

visarya said:
where can i download unofficial recovery for grand memo
Click to expand...
Click to collapse
you can find it here:
needrom.com/mobile/zte-n5/[/url]
I cant set the full link cause i did not more then 10 posts

Good!
took weeks breaking my head up late at night from surfing the net to find some way to rooting this stunning smartphone. But I've been stuck due to no knowledge of ADB commands and of course having no Chinese idea, since supposedly there's an app that automatically Root the phone, but I can not make it work.
Having my disability, I share with you all the information and resources I've got to give you hope someone knows the correct usage.
And it is a shame that a HIGH terminal does not remove all power performance not ROOT and therefore can not set you GAPPS
Web Recovery 4.2.2 ROM and instructions: w w w needrom com/mobile/zte-n5/ (Requires registration, but I am uploading files to my Dropbox so it is not necessary)
* Chinese Subforum: w w w zhongxingfans com/forum-560-1.html (Registration is required, I can spend my MP user you're needed)
* Chinese Tutorial on previous subforum: w w w zhongxingfans com/thread-51487-1-1.html
* Other Chinese Subforum: w w w popfen com/forum.php?mod=forumdisplay&fid=65&filter=typeid&typeid=167 (Same as above, I have also user)
*Another one: www gaojiquan com/forum-ZTEN5-1.html (I'm not registered, I think)
* DropBox folder with everything I've coseguido, even assuming the mobile program that automatically Root: w w w dropbox com/sh/ap64zaexa5sa8op/we9TXWX
* Future tutorials: h t tp : // es.ready2root.com/info/grand-memo-n5 (Now is empty)
[/ LIST]
Hope you have better luck than me, and if they have some known to speak Chinese would be helpful to us.
NOTE: These is a google traducction from a another post from a spanish forum, if you have problems with the links, you can go to the original post here: www . htcmania . com/showthread.php?t=664705

Found this on a chinese website, its not for root, but for better performance of the ZTE N5 :laugh:
Just translate the page with Google Chrome standard translator, and you will understand.
(im still not able to set full links )
link for website:
h t t p ://sjbbs. zol .com.cn/164/642_1635239 .html
link for download:
h t t p://devicedownload .zte. com.cn/cn/UpLoadFiles/product/0/242/soft/2013052815114637 .zip
Im still having the issue that i cannot install GOOGLE PLAY, anyone here that solved that problem???
I appreciate your help
Greets,
Reppo1911

How did you install cwm on zte v9815 please?

CCR
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Hello,
Is there some lock in EU phones whereas at the end of the aforementioned process the phone does shutdown and remains, the terminal is waiting for device..., rebooting in system recovery cwm is still missing and every sideload fails, any clue? People on the River would be Happy to give from a remote location.
hxxp://postimg.org/image/42tvojjvh/
ps: all I obtain is this->hxxp://postimg.org/image/blbyq6khf/332da320/
Freedom and Democracy shouldn't mean being jailed within some digital cell while paying for acquiring it: Amendments.

Can anyone give detailed directions?
I just got the device. I tried installing a google play store apk (tried a few different versions) all installed but none work.
How can I install the play store? Do I have to root the device? If so, are there detailed (English) instructions somewhere?

Someone knows if the Mobileuncle MTK Tools can root zte v5? I need to find a" one-click" app...

Partial success
I have installed the rom from needrom for the N5 android v 4.2.2. Took a while to flash the recovery, which is in chainese (driver issues). But still have serious connections issues:
The 3G network disconnects on restart and takes forever to reconnect. Wifi doesn't work! Built in keyboard is awful and also... chainese!
But it is rooted and has the google apps.
Does any one recommend a better combination of recovery and rom?
This is my wife's phone and she is having a lot of trouble with it.

Monsanto
yanay zimran said:
I have installed the rom from needrom for the N5 android v 4.2.2. Took a while to flash the recovery, which is in chainese (driver issues). But still have serious connections issues:
The 3G network disconnects on restart and takes forever to reconnect. Wifi doesn't work! Built in keyboard is awful and also... chainese!
But it is rooted and has the google apps.
Does any one recommend a better combination of recovery and rom?
This is my wife's phone and she is having a lot of trouble with it.
Click to expand...
Click to collapse
How do you flash a Custom rom we cannot even install cwm?
I wrote the Valorous Chinese told me to ask somebody elsee hence I sorry under God shall wish China a Genuine Bankruptcy for denying us Private Property, Communism is a mental disease our Lord should Treat. hxxp://en.wikipedia.org/wiki/Orange,_Vaucluse

How to?
JPWK said:
How do you flash a Custom rom we cannot even install cwm?
I wrote the Valorous Chinese told me to ask somebody elsee hence I sorry under God shall wish China a Genuine Bankruptcy for denying us Private Property, Communism is a mental disease our Lord should Treat. hxxp://en.wikipedia.org/wiki/Orange,_Vaucluse
Click to expand...
Click to collapse
I Followed downloaded the files from the dropbox posted upper in this thread. and followd the instructions in the previous page. Pay special attention to installing the driver for the divice. As soon as it reboots into bootloader it requires another driver.
Also if you must not restart the phone before flashing the rom otherwise it won't last.

perfect aarmewdd um in slack
yanay zimran said:
I Followed downloaded the files from the dropbox posted upper in this thread. and followd the instructions in the previous page. Pay special attention to installing the driver for the divice. As soon as it reboots into bootloader it requires another driver.
Also if you must not restart the phone before flashing the rom otherwise it won't last.
Click to expand...
Click to collapse
I am very Confident Folks bould ask ya about this driver thus they can rush downloading it like gold diggers to the root Saint Cloud very much
postimg.org/image/n6bj2rgyd/

The Lenovo A706 Owners' Thread (Root/CWM/Other Discussions)

The Lenovo A706 Owners' Thread (for Rooting, CWM, and other discussions)
Official Product Page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------------------------------------------------------------------------------
Device Specs:
---------------------------------------------------------------------------------------------------------------
SIM Type: Dual Mini-SIM
Band Coverage: GSM 900/1800/1900 MHz (Asia-Pacific)
GSM 850/1800/1900 MHz (Latin America)
WCDMA 900/2100 MHz (Asia-Pacific)
WCDMA 850/1900 MHz (Latin America)
WLAN: 802.11 a/b/g/n with hotspot capability
Display: 4.5" IPS (Can anyone confirm if it has Gorilla Glass?)
Resolution: 480 x 854
Navigation: 5-point capacitive touch
Processor: Quad-Core Qualcomm MSM 8225Q 1.2GHz
OS: Android™ 4.1 Jelly Bean with LenovoMagic UI
Memory: 1GB RAM
Storage: 4GB Internal Storage (eMMC) with memory card slot
Battery: 2000mAh Lithium Polymer user-replaceable
Dimensions: 136 x 69 x 10.4 mm
Weight: 130g
Sensors: A-GPS, Gravitation, Ambient light sensor, Proximity sensor
Camera: Front: 0.3MP fixed-focus, Rear: 5MP auto-focus
FM Radio: Yes
Color: White
---------------------------------------------------------------------------------------------------------------
This is a good budget device when compared to other devices from lead manufacturers like Samsung, Sony, LG or Huawei.
While searching on the internet I did find some Root & CWM installation methods.
I will be updating the relevant posts as and when needed.
You can look in the list below for what you want to do with your device.
ATTENTION!!! READ THIS BEFORE DOING ANYTHING
---------------------------------------------------------------------------------
Friend, there are two versions of this device in the market:
1. A706 (Chinese model)
2. A706_ROW (International Model)
The ROMs in this thread are only for the A706ROW model of this phone unless otherwise stated.
If you have the chinese model or another model A760 (which is a different model) then the ROMs in this thread are not for you.
Model A706 and A760 are two different models with almost same specifications. This DOES NOT mean that the ROMs of A706ROW are compatible with A760.
Please DO NOT confuse Lenovo A706 with Lenovo A760 as these are two different devices!!! Flash or experiment at your own risk!!!!
If you share a ROM link for any of the above devices, then please mention clearly the device for which the ROM can be used.
What to do with your Device ?
-------------------------------------------
DISCLAIMER:
---------------------
Rooting your device VOIDS your warranty. Remember if you are doing this, it is at your own sole responsibility
and I cannot be held responsible for any damage to your device, data loss, or any personal injury as a result of your actions.
And, If you still feel it is worth the effort, proceed with caution!
FOR NOOBS
--------------------
Read the instructions (click on SHOW to read) before attempting anything from the list below!
First you need to have the Android SDK installed on your computer. Or atleast you need to have the adb & fastboot files available on your computer.
Here's a good post that tells you how to setup ADB and fastboot.
Here's a post that has a list of adb/shell commands for noobs.
Ok, once you are done with the setup of ADB & fastboot on your computer, then you can proceed with the below instructions.
--------------------
IMPORTANT NOTE BEFORE FLASHING:
-------------------------------------------------------------
Recently, I have noticed that many people after buying the phone are flashing any firmware to their phones and most of the time without checking the phone versions and the OS versions. In the stock firmware post, I had mentioned that people having the Chinese version of the phone should NOT flash the ROW (international) firmware otherwise it would mess up their phone and network etc.
SOLUTION FOR SIM ERROR & DOWNGRADING TO CHINESE ROM
-----------------------------------------------------------------------------------------------------
Now, some of the people have already done such a mistake and for those people (who are having SIM or network problems and want to go back to chinese ROM, I am sticking this post by danyno1 to the OP:
(Click SHOW to See the quoted post)
----------------------
danyno1 said:
hi
I've just installed the "A706ROW_1_S_2_001_0020_130821 MegaFull"" rom , and now i have no network coverage, it doesnt recognize my simcards
I live in Iran.
what should i do??
is there any way to unlock it ??
please help me with this situation , i'm in a hurry
------------------------------------------
after reading the whole topic posts, and testing all the methods , the problem is solved [thanks to mixbox360's posts.] i'm going to just copy and paste his 2 separated posts.
BEST soloutions for these 2 common problems :
#1 device doesnt recognize simcards
#2 being unable to downgrade to the chinees stock rom
soloution of the #1 problem :
how I fixed: Just Installed the QNeonModern 1.7 ROM... then I installed the update of a chinese ROM from bootdroid (I mean putt the update.qsb file un the sdfuse directory o my sd card, then power and vol+ to enter the menu and selected SD UPDATE)... thats all... I have again my chinese rom with signal for calls untill we discover how to make work the athk board in the ROW roms.
Hope to be helpfull!
Click to expand...
Click to collapse
soloution for #2 problem:
Ok trying again to put my chinese device in ROW rom with sim signal, and found a solution:
1:Flash via droidboot a chinese stock firmware I used the 130325
2:Rooted device with vroot and installed CWM Recovery via ADB
3:In the procedure to install custom rom Qneon one of the steps is to flash boot.img via fastboot... well I just didn´t do this step and flashed directly Qneon_1.7.1.zip via CWM
4: Did data/factory reset, cache reset and dalvik cache reset
5:Reboot system
An Ready! Finally got my chinese device in spanish and sim signal.
Click to expand...
Click to collapse
ENJOY THE DUAL SIM ANTENNA + ROM WITH MULTIPLE LANGUAGES
CREDITS : mixbox360
Click to expand...
Click to collapse
------------------------------------------
For Installing CWM: Go to Post #2
For Rooting: Go to Post #3
For Stock ROMs: Go to post #4
For Custom ROMs: Go to post #5
Credits:
-------------
- Lenovo for making a surprisingly good budget phone
- And users for buying it!
Enjoy your phone and share your thoughts and helpful insights/useful methods with all other users here so that they can benefit from your research.

CWM Installation Instructions:
-------------------------------------------
Make sure you have all the drivers for your phone installed on your computer. Download for A706 from here. Some other Qualcomm drivers (not sure if required)
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery for A706 from here.
Unzip the downloaded file to get a "recovery.img" recovery image file.
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display Lenovo logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
. Or, you can keep the power+vol up+ vol down buttons pressed to restart.​
If everything has gone well, this should get CWM installed on your device. Your device is still *not rooted*. Once you have installed CWM, please proceed to the ROOT instructions post to *root* your device.
CREDITS:
---------------
This post (in Vietnamese)
This post for Recovery (in Russian)
This post for Drivers links (in Russian)
And, to all the other great Russian/Chinese forums and sites who have such vast info on Lenovo which we need in English

DISCLAIMER: Rooting your device VOIDS your warranty. Proceed with caution!!!
1. CWM ROOT METHOD
-------------------------------------
Ok, so you have successfully installed CWM and need root.
1. Just download this Root for A706 ( CWM flashable zip file)
2. Reboot phone to CWM Recovery (use command: adb reboot recovery)
3. Flash the zip and then restart into OS.
4. Now, you should get the Super user app in the list.
2. VROOT (ONE-CLICK ROOTING) METHOD
------------------------------------------------------------------
For noobs AND people who either don't want to install CWM or are unsure of it's usage and only want root, can use this guide for VROOT one-click rooting method. The guide has been translated and posted on XDA by zhuhang. The original vroot post/method (in chinese) exists on this site.
CREDITS:
---------------
Same as in the CWM post above.
Thanks to zhuhang for posting the VROOT guide in english (translated from chinese).

DISCLAIMER: Follow these instructions at your OWN risk & responsibility. They are provided AS-IS without any liability.
IMPORTANT NOTE BEFORE FLASHING:
-------------------------------------------------------------
Recently, I have noticed that many people after buying the phone are flashing any firmware to their phones and most of the time without checking the phone versions and the OS versions. In the stock firmware post, I had mentioned that people having the Chinese version of the phone should NOT flash the ROW (international) firmware otherwise it would mess up their phone and network etc.
Solution to the problem is now in the OP. Please follow it if you have SIM error or network issue.
STOCK ROM
--------------------
I am posting a list of stock firmware(s) that I can find for the A706 here, along with instructions on how to install it.
FIRMWARE LIST
-------------------------
Build Number: A706_ROW_S018:
Details:
Firmware Type: Official Release
Languages: English, Russian, Chinese, Indonesian & Vietnamese
Build Date: 15/07/2013
OS: Android 4.1.2 with Lenovo Magic UI
Download Link: Get it from here (Lenovo-Forums.ru)
(You need to click on the green button on the page. Once you click there then you need to register and logged in, to download it.)
CREDIT: This post in Russian.​
This post by 5[Strogino] has a list of stock firmwares and links to download them.
INSTRUCTIONS
-----------------------
A memory card is required.
Boot into Android normally.
Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
On the root of the memory card, create a folder called "sdfuse".
Unzip the downloaded firmware, you will get a QSB file.
Copy the QSB file to the sdfuse folder that we created earlier on the root of SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated.
That's it! If you guys have found any more firmware download links (even for different regions, build etc.) just share them with me along with details and I will add them to the list in this post.
CREDIT: Instructions were taken from this post and formatted and edited for better understanding.

A List of Custom ROMs
------------------------------------
QNeon-Modern ROM (based on Russian Firmware but has English too): Visit the original thread (in Russian)
Please do share more ROMs with me so that I can include them in this list.

help!
hello bro! i got stuck at installing the cwm flashable file. it's saying "Verifying update package.... Installation aborted"

gr8techie said:
RESERVED (for a list of Stock ROMs/Stock ROM installation)
Click to expand...
Click to collapse
Thanks,
Very nice thread. Had the phone for a month but no support anywhere. i need the stock rom, if u have pls pm me.
thanks again

scuderialoki said:
hello bro! i got stuck at installing the cwm flashable file. it's saying "Verifying update package.... Installation aborted"
Click to expand...
Click to collapse
scuderialoki, unfortunate that you got stuck. worked for me without any issues. i upped the same file that i used on mediafire. can you re-download the file and then check if the file is ok by extracting the zip using winrar or winzip? if it is ok then try flashing it again.
guliboy123 said:
Thanks,
Very nice thread. Had the phone for a month but no support anywhere. i need the stock rom, if u have pls pm me.
thanks again
Click to expand...
Click to collapse
guliboy123, i will be putting the link and some instructions on the stock rom post soon. bear with me as i have to check the instructions from the russian/chinese sites and then put it up here. in the meantime, i suggest you take a backup of your current ROM (which is stock) using CWM and then try out the QNeon-Modern ROM. remember u need to flash that ROM using CWM.

thanks
scuderialoki, unfortunate that you got stuck. worked for me without any issues. i upped the same file that i used on mediafire. can you re-download the file and then check if the file is ok by extracting the zip using winrar or winzip? if it is ok then try flashing it again.
Click to expand...
Click to collapse
gr8techie thanks for the reply. i really appreciate it. just downloaded the flashable cwm however it's still the same bro. lemme tell you something though. i rooted the devices before using framaroot and everything is ok but i had to do a factory reset through the settings app in A706. i still see the superuser app in the system apps and i cant uninstall it. when i open the superuser app in the drawer it's giving me an error that the su binary is not installed and su cant install it.

scuderialoki said:
gr8techie thanks for the reply. i really appreciate it. just downloaded the flashable cwm however it's still the same bro. lemme tell you something though. i rooted the devices before using framaroot and everything is ok but i had to do a factory reset through the settings app in A706. i still see the superuser app in the system apps and i cant uninstall it. when i open the superuser app in the drawer it's giving me an error that the su binary is not installed and su cant install it.
Click to expand...
Click to collapse
ok, please tell me if you have CWM installed on your device? I believe it is not installed. if this is the case, then you need to flash CWM and then try installing the zip again.
if it is installed then, i believe the super su from previous rooting maybe causing the problem. check on Playstore for a method to unroot your device. or google it. then you need to root again. hope this solves your problem.

thanks
Hi bro thanks for the reply i attached a screenshot of my root validation. I used an app to identify that. And by the way my recovery is installed. I the super su app is killing it

New page for our devices :good:
I had rooted my Lenovo A706 before You made this page You are faster than me , bro :laugh::laugh:
Hope our A706 will have more ROM, Init , Kernel that make it better

Some picture of mine, they are old ones..I am cooking some new thing on A706...:laugh: hope you like

Anyone know how to switch between few apps on lenovo A706?
long press on home button will only show the google now
Changing input method when typing also an issues i met,
anyway to change the input method when typing?

Can someone upload an official updated rom (ROW) for lenovo a706? It'll be much appreciated.

FREE CALLING SERVICE PROBLEM
guys,, may be you can help me... the problem is i can hear what other people are saying in LINE / Skype /Viber but people can't hear anything i said.

Goog, I want it
Sent from my Lenovo A706 using xda premium

silv3rmoon said:
Anyone know how to switch between few apps on lenovo A706?
long press on home button will only show the google now
Changing input method when typing also an issues i met,
anyway to change the input method when typing?
Click to expand...
Click to collapse
Long press in menu button ^^
---------- Post added at 08:20 PM ---------- Previous post was at 08:18 PM ----------
rapnix said:
FREE CALLING SERVICE PROBLEM
guys,, may be you can help me... the problem is i can hear what other people are saying in LINE / Skype /Viber but people can't hear anything i said.
Click to expand...
Click to collapse
just viber bro...because maybe viber isn't usable for us now..i can use skype , line , zalo and every things else nomarly

@trithong.. bro. also in LINE and TALKRAY i encounter this problem some of us already encounter this problem what version do you have? i have A706ROW.. no problem if only chatting but if i want to use calling features that's were i encounter this kind of problem i can here them but they cannot here me

my A706 can't root.
CWM show Installation abort!
Baseband ver
A706ROW_1_A_2_0046_130604
Internal ver
A706ROW_1_S_2_001_0018_130705

[ROOT][TWRP][Unlock] Chuwi Hibook by kostyamat

Hibook-ToolBox​
For first - to write my english is bad, bad, very bad... But I understand english
I allowed myself to write a few batch files to help newcomers, as well as other users, under common title "Hibook-Toolbox".
Русскоязычная версия: http://4pda.ru/forum/index.php?s=&showtopic=741766&view=findpost&p=49156807
It allows you to:
Unlock the new tablet Bootloader.
Unprotect system partition from changing (remove "Verity Boot").
Install TWRP-recovery ver-2.8.7.0, which I have ported to this tablet.
Get the correct ROOT in the right way.
Flash custom firmware (which do not have to wait long, I think so)
And other…. I will add if still need to be.
Attention! Whatever you do, you do it at your own risk!​
Download (needrom.com): http://www.needrom.com/download/unlocktwrproot/
Preparation:
Unzip the archive to PC, but try not to use special characters or folder names with space in the paths to files. Better way is unzip to a folder in the root of drive C: or D:
Turn on ADB-debugging: "Settings"-"About Tablet" >-> Taps under the item "build number" until the caption appears "you became a developer"-> Return one step back-> enter the item for developers "-> Enable" USB debugging ".
Connect the device to the PC.
Install the Intel driver IntelAndroidDrvSetup1.10.0.exe
Usage:
1.Unlock_Bootloader.bat - Run first. It will unlock the bootloader. Carefully follow the prescriptions of the script and on the screen of the tablet. ATTENTION! All settings, programs, as well as all data on internal SDCard will be destroyed! Data on external MicroSD and Windows will not suffer. After unlocking the device will reboot in factory recovery, which does not display anything (stupidly black screen with backlight), the process may take up to 10 minutes (I'm shocked, but it's true), then the device will reboot in Android pristine clean.
2.Unlock_Verity-boot.bat - Run second. It will unlocking the System partition to can be changed. Carefully follow the prescriptions of the script and on the screen of the tablet. The device will reboot. Data on external MicroSD and Windows will not suffer. After all unlock actions, be sure to enter the option for developers and turn ON the item "Factory unlock".
3.Outside_boot-TWRP-recovery.bat - (It is optional. For obtain ROOT access). The device will be rebooted into the temporary session of TWRP-recovery, to Internal sdcard will be placed UPDATE-SuperSU.zip - install it using TWRP. Previously, you can make TWRP backup (recommended!).
4.Flash-TWRP-recovery.bat - (It is optional) TWRP-recovery will be permanently flashed into the Tablet. (Not recommended! Some time firmware will update, TWRP cannot install OTA-update)
5.Flash-ORIGINAL-recovery.bat - (It is optional) Flash back to the original Recovery.
ADB_shell.bat - Just a comfortable CMD-window for ADB-debugging and work with Android Shell.
Flash-Custom_FW.bat – My flasher to flash custom firmware, which I am sure will appear in future.
Useful console commands (ADB_shell.bat):
ADB reboot bootloader - reboot to FastbootDroidboot (flashing) mode
ADB reboot recovery - reboot to TWRP or native Recovery mode.
ADB root – restart ADB-debug service as ROOT.
ADB remount - remounting Android system partition to write (you need root-adb mode see adb root)
ADB shell - run Android-console (ash) through which you can run Linux-scripts, internal system commands, etc.
fastboot boot * *.img – run user-compiled boot.img or recovery.img
fastboot reboot – reboot to system from DroidbootFastboot (flashing) mode.
fastboot flash [boot, recovery, system, data] [boot, recovery, system, data]. img - In DroidbootFastboot mode, It will flash specific image to specific partition, example: fastboot flash system c:\Custom_FW\system.img - will flash only system.img to Android system partition.
PS. Under any circumstances, when using TWRP, never do not wipe system partition! Also make sure the TWRP-settings option "Use rm-R instead of formatting" is ON and never leave it. The fact of the matter is that "Verity Boot" marked System partition itself. Withing format the label disappears - the tablet won't boot to Android! This problem can be solved, but why You would make a problem?
If You like may work, buy me a coffee. Please :|

Hibook-Toolbox was updated 06/04/2016

Nice work, it is really great to see the android side of the hibook 10 has root. this is an excellent tablet and I am ordering it as of now.
I hope you and others will continue working with this tablet, as android n would be great on here.
Thanks. :good:

Hi ! Can you share what tools you use for modding TWRP for HiBook and what files you have changed ? I need to do the same for Chuwi Hi10 DualOS, based on the same hardware, i want to port your TWRP on it..

I have installed root too whit this tutorial. It works perfect. If someone is interested in modding whit kernel or custom Rom i have accsess to all partitions from ubuntu on the tablet. Please ask me if you interested in somthink. The stock Rom and kernel are not the best.
Sent from my Samsung Galaxy S III using XDA Labs

kostyamat said:
Hibook-Toolbox was updated 06/04/2016
Click to expand...
Click to collapse
It works also on Chuwi Hibook pro??

Hi,
I´ve got my brandnew CHUWI HiBook Pro 2 in 1 Ultrabook Tablet PC (10") today. Could you pls confirm that your toolbox is suitable for this tablet as well?
I won´t brick it on the very first day using wrong software ...
many thanks in advance
cheers Andreas

I think its OK. It works perfekt for me. But if you not sure for yourself than dont do it. Thats all we can say. If you dont try it you dont See if it works or not. Its your choice. And dont get panic if the first vor second try dont work. I dont know how many trys i used and some times i was realy scared about my chuwi. But than i realized that i made something wrong vor forget somthing. After all the work and the shocks my chuwi worked perfect. But if you dont try it you dont know if it works.
Sent from my Samsung Galaxy S III using XDA Labs

Hi, it shows the links are broken, can you please update new links
thanks

I confirm successful rooting for chuwi hibook pro, too.
I want to ask... Do we update supersu from Play store??

Hi man
I will proceed later today to do this.
2 questions...
1) how did you compile the TWRP for our needs? or is it a general one?
2) regarding custom fw, is there cyanogen/remixos 3/anything else based on android 7 available??
Thanks
regards
Luca

Confirm, root sucess for chuwi hibook pro.
Thank you

Root works fine, thank you
I had to install SuperSU.zip from the SuperSU Website.
Reason: Binaries couldn't be updatet.
One problem with TWRP left.
Touch input isn't working well.
Seemes that the touch mask is shifted.
I have to connect a mouse via OTG
[EDIT]
I found another posting with newer TWRP Version (3.0.2.0).
Problem Solved.
modaco.com/forums/topic/377883-recovery-twrp-302-0-for-chuwi-vi10-plus-hi10-plus-hi10-pro-hibook-pro/

Hello,
After launching the first .bat file my tablet does not automatically restart. It restarts when I click the power button, and start when the tablet starts normally without data loss as specify
I attached pictures of my tablet after restarts automatically after launching the .bat file
What to do ? I am stuck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It`s ok, I didn`t have reboot neither, nor data loss.

Hey guys, new Chuwi Hi10 Pro owner here. I just want to make sure this will work with the build number for my tablet. It's currently running 5.1.1-B2016081102, Remix OS version 2.0. I'm pretty familiar with rooting Android devices, but I still like to make sure I'm following the proper steps before attempting anything. Thanks in advance.

Nippylicious said:
Root works fine, thank you
I had to install SuperSU.zip from the SuperSU Website.
Reason: Binaries couldn't be updatet.
One problem with TWRP left.
Touch input isn't working well.
Seemes that the touch mask is shifted.
I have to connect a mouse via OTG
[EDIT]
I found another posting with newer TWRP Version (3.0.2.0).
Problem Solved.
modaco.com/forums/topic/377883-recovery-twrp-302-0-for-chuwi-vi10-plus-hi10-plus-hi10-pro-hibook-pro/
Click to expand...
Click to collapse
you have hibook or hibook pro? because modaco only have twrp for hibook pro.. is it compatible for hibook also?

eltdesign said:
you have hibook or hibook pro? because modaco only have twrp for hibook pro.. is it compatible for hibook also?
Click to expand...
Click to collapse
I have the HiBook Pro

[ROOT][TWRP][OUTDATED] Oppo R9S (China edition) exploit and TWRP flasher

This tool is out of date. See the main R9S thread for an updated tool by Wu Xianlin which gives you an improved TWRP recovery and access to more ROMs.
Original post is below for historical purposes only.
Oppo R9S (Chinese version) TWRP installation tool
Only works on Chinese OS release 005 which can be downloaded here and flashed in stock recovery.
Earlier versions will not work, nor will later versions. It has to be this specific version.
P̶r̶o̶b̶a̶b̶l̶y̶ doesn't work on international editions either.
DOWNLOAD - R9S_TWRP.zip - V1.01
DOWNLOAD - R9S_TWRP.zip - V1.0
Changelog
1.01 - Tweaked timings to try and improve success rate
1.01 - Changed how text is output to hopefully improve appearance on Windows 7
This script uses an exploit by Chinese developer Wu Xianlin to gain temp root, then it flashes his TWRP build that works on the R9S despite the locked bootloader.
From there you can attempt to perma-root your phone, install a custom ROM etc. etc.
Thanks to the following XDA members, without whom this would not have been possible:
jacksmack
celoxocis
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Antivirus issues
Some AV's may complain about this file containing a Trojan. They are technically correct. It's called "dirtycow" and is being used in the wild to hack into Linux systems. It cannot affect Windows systems, but I use it to hack a linux-based system (your phone)
If your AV refuses to let my script run you will have to disable it temporarily. Feel free to read through my script (root1.bat) to check what it is doing.

Useful things to flash in TWRP
CyanogenMod13 - by Wu Xianlin
Stock Recovery - by Wu Xianlin
GApps (ARM64) - by opengapps.org
Updated basebands, ripped from ColorOS
Use these only if you have issues with phone/GPS/etc. after installing CM. Otherwise leave alone.
[2017-01-11 v0180] - released ROM (China) - by me!
[2017-01-24 v1470] - ALPHA ROM (China) - by me!
Note: The version number on basebands stays the same, but the MD5s are different. No idea what has changed, but they work!

Unbrick instructions:
Does not work in Windows 10. Tested working in Windows 7
Download this unbrick package
Install the quallcommmtkdriver package
Run daanav-enabler as administrator
Run msmdownloadtool as administrator
Click through any timeout error you get
Click on the titlebar of MSMDownloadTool and press F6 to enable the options
Fully power down your phone by holding vol-, vol+ and power for 10 seconds
Hold vol- and vol+ while connecting the USB cable (use the stock Oppo cable)
MSM should now show your phone.
Press F5 to decide what to flash. For the first attempt choose "All except userdata".
Click the start button.
After 5 minutes your phone should reboot into ColorOS.
If ColorOS hangs on boot, then repeat the above staps and this time flash all, including userdata. This will wipe your photos etc. sorry!
This will leave you on V004 of the OS. You will need to upgrade to 005 before attempting to root again.

Can I request a version of this that stops at permanent rooting? Unless you think there would be a problem with the fact that I intend on using it on a r9s plus.
Or a link to what I maybe overlooked, in case it already exists.

Unfortunately this program doesn't perma-root. It gains a temp root and uses that to flash TWRP. TWRP can then be used to flash a custom ROM or a rooting tool.
It also doesn't unlock the bootloader. Wu Xianlin somehow managed to make a version of TWRP that the locked bootloader is happy with!
however if you edit root1.bat and scroll down to line 181. Change it from:
Code:
type root3.txt | adb shell /data/local/tmp/root2.sh
to:
Code:
adb shell /data/local/tmp/root2.sh
Then the script will just drop you to a root shell. Unfortunately you are then on your own as to how you get perma-root.
I have no idea whether this method will work on the R9SPlus. In theory it should do but I've not tried it. I won't be held responsible if you brick your phone and probably won't be able to help, though you should be able to do a three-finger reboot and then boot into recovery and reflash ColorOS.
Optional modifications you can make that will make the script neater:
You can also remove lines 178 and 179
Code:
echo Copying TWRP
adb push r9s-twrp-3.0.2.0-20170107.img /sdcard/twrp.img
and change line 184 from
Code:
pause
REM ---- CHINESE TWRP HELP ----
to
Code:
pause
exit
REM ---- CHINESE TWRP HELP ----

I will take your "I have no idea if this will work fo r9s+" at face value and try to be patient for something more certain, thanks for your contribution nonetheless
I saw the translation you posted and am a bit depressed Wu recommended to return the phone...

Oppo make amazing hardware but terrible software that is never updated. I used to be ok with this because they actively encouraged rooting and custom ROMs but this change in attitude from them makes it very hard to recommend the phone.
I would be interested to know if this exploit does gain root on the Plus. In theory it should work, and there's also a decent chance that TWRP will too as the hardware is very similar, but will require someone very brave/stupid to try it

BTW. Anyone who is going to try this on the Plus. Ensure you have a flashable .ozip of a working ColorOS (full install, not OTA) saved to internal storage as the stock Oppo recovery is a POS that doesn't provide ADB, MTP or USB.
If you end up wrecking your OS and don't have that image in place ready to flash from recovery you are screwed.
Likewise do not flash TWRP until you are sure that your OS is still bootable, and also take a dump of the stock recovery first! (and post it in the other thread as it's bloody useful to have!)
Sent from my OPPO R9s using XDA Labs

Hi the Unbrick pack RAR is corrupted and can not unzip.
Also there is Trojan in DOWNLOAD - R9S_TWRP.zip - V1.0 - Dirtycow file and the NOD Antivirus is deleting this file.
Please advice how to proceed ?

NOD is correctly detecting that this is a hacking tool using a well known exploit (dirtycow).
Since you actually want to do that, you're going to have to disable NOD until you're done.
Sent from my OPPO R9s using XDA Labs

Lum_UK said:
NOD is correctly detecting that this is a hacking tool using a well known exploit (dirtycow).
Since you actually want to do that, you're going to have to disable NOD until you're done.
Sent from my OPPO R9s using XDA Labs
Click to expand...
Click to collapse
Hi I got to somewhere but I am stuck now...
Please check the pic and advice how to install the CyangenMode. (I have uploaded the pic in your thread in Oppo Community forum please check it there because I am new here and can not post with external links..)
Sorry for the inconvenience. Looks like I am few steps away to finish the job but something is missing...

Goro1234’s image: http://s27.postimg.org/8usudi9g3/IMG_20170207_133854.jpg
You need to do a wipe data/cache/dalvik as CM won't install on top of incompatible data.
Note that this will wipe your installed apps, settings, app data, saved games etc. but will not wipe your photos, music, downloads or anything else saved to internal storage.
You may wish to take a backup from within TWRP first. Apps like Titanium Backup and Nandroid Manager are reasonably good at restoring apps and data from a TWRP backup.
Also don't forget to install GApps
Sent from my OPPO R9s using XDA Labs

For the unbrick package you need 7-Zip to extract it.

Lum_UK said:
`Also don't forget to install GAaps`
Hi I am on Cyanogen now !!! Thanks for the help. Can you please tell me now which is the correct gapps version for our device. I have installed random one which does not make connection with google. I have tried to install ARM 64, but cant flash because systems says that is incompatible... Thanks
Click to expand...
Click to collapse

Select ARM64, android 6.0 and whichever variant you like (I recommend the Pico version)
Sent from my OPPO R9s using XDA Labs

Sorry for the English, I made a mess with the phone, after unlocking everything, and held the phone for several days with CM13, I saw that GPS was not working, so vovelo return to the origin, but now I can not installing Stock Recovery more to put the stock rom, I tried to do unbrick, but when I press start of msmdownloadtool, the program stops and closes. If some kind soul gives me some advice. Done everything under win 7 reset. Thank you so much Gianfranco.

GPS should be working. I'm using it all the time on CM13 as my phone is my satnav.
Maybe wipe and reflash, or try one of the baseband updates?
Sent from my OPPO R9s using XDA Labs

Now, the problem is more to do so that I can not leave,
I installed through the files Stock TWRP Recovery as a boot, and I hand the boot source and installing the original rom, after the reboot remains on oppo screen. what can I do. Thank you so much Gianfranco.

hold all three buttons for 10 seconds to forceibly power off the phone and then try to boot to recovery.
If you get the Oppo recovery then try to do a factory reset and then flash the stock ROM,
if you get TWRP then try to flash Cyanogen.
If you can't do either then you're going to have to run the unbrick tool. Do you have another PC you can try it on?

Thanks, but I have tried various solutions, when I install the boot ROM from stock, is successful, the reboot hangs installation applications. I wanted to know if you can other software for unlocking. Thank you very much for giving me some advice, thanks ancora.Gianfranco.

Generals Z17 miniS - NX589J

Hello everyone,
I got z17 miniS several months ago, but I hate the original ROM, no Gapps, no notification, … I’m a newbie on Android (my previous phone is windowsphone), so I don’t know well any things about Android, root, …
I’ve searched on internet many times & found some ways to install Gapps, TWRP, ROM for this phone, almost them from chinese forum. Because the link download on baidu server so I re-up them to another server.
In this thread, I will guide you root, install twrp, Gapps, … to z17miniS, it worked with my phone. Hope it works for you.
Carefully with all you do. Please always backup.
Links download:
Nubia emergency Tool V1.1.4: https://www.up-4ever.com/io2mab10hl1v
Zte-handset-usb-driver-5.2066.1.11: https://www.up-4ever.com/lgr8tdrr5vaj
Nubia_Z17_mini_twrp_root_pack: https://www.up-4ever.com/v8snlmbh75df
TWRP_recovery-3.2.2_NX589J: https://www.up-4.net/wa89whiahgl4
nubiaz17miniS-beta1-twrp: https://www.up-4.net/c86atyqd8sui
ROM NX589J:
NX589_V210_update: https://www.up-4ever.com/osu00tfe6koj
NX589_V212_update: https://www.up-4ever.com/dk6dbxlmo07e
NX589-V216-update: https://www.up-4ever.com/jmoled2gd282
NX589J_V2.16_2018.01.09: https://www.up-4ever.com/01t4o8eh5unb
NX589_V217_update: https://www.up-4ever.com/gxkex20t4or3
flyme6_NX589J_136fei_6.8.2.10R: https://www.up-4ever.com/8davy47ryz6f
flyme6-Root: https://www.up-4ever.com/0cx7b97v2q4s
flyme_NX589J_136fei_6.8.3.29R-root: https://www.up-4ever.com/xa3qvgsyc8ah
NX589J-ENCommonV1.01: https://www.up-4ever.com/27gya085krcw
NX589J-EN-1.04: https://www.up-4.net/cw3odzxnzb1b
NX589J-V3.04 CN Original: https://www.up-4.net/na7s02qe9nty
Mokee free version: https://www.up-4.net/w15h1p2pvlwa
Rom mod from CN3.04: https://www.up-4.net/mm0bqb7cuwt7
NX589J-V3.07 CN Original: https://www.up-4.net/9jha11t6eib6
NX589J-EN 1.06: https://drive.google.com/file/d/18tl7P9IWDJU0Day_zukPdHg8NQQY0ahz/view
NX589J_Z69_EN_UJH1N_V107: 2019/02/21: Please restore your phone to factory default settings after upgrade in order to make sure that software upgrade is valid: https://www.nubia.com/de/support.php?a=phone&pid=37Foreign
APP:
open_gapps-arm64-7.1-full-20180207: https://www.up-4ever.com/8q1z0y1dntp4
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
open_gapps-arm64-7.1-full-20180814: https://www.up-4.net/ba3m3u6ylb8e
Xposed Nubia by SY: https://www.up-4.net/ni0e4lnu1v51
1. Preparation:
- Charge Your Device.
- Backup Phone Apps, Contacts, SMS.
- Enable developer options: Go To Settings -> About Phone -> Tap On “Firmware Version” 7 Times To Enable Developer Options.
- Enable USB Debugging: Go To Your Preferences -> Advanced -> Developer Options -> Tick The “Usb Debugging” Checkbox.
- Enable OEM Unlock: Go To Your Preferences -> Advanced -> Developer Options -> Tick The “Oem Unlock” Check box
2. Install Nubia Driver: Zte-handset-usb-driver-5.2066.1.11
3. Install TWRP, root:
- Download the TWRP Recovery Flash Tool: Nubia_Z17_mini_twrp_root_pack, unzip it.
- Connect your phone to PC
- Run GizFlasher.bat
- Choose 2, then your device reboot to twrp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Change language to English
- Choose tools & Root device
Another TWRP: Run z17minis刷recovery.bat & choose 2 to install twrp.
4. Install Gapps:-
- Download open_gapps-arm64-7.1-full-20180207 and Flash the zip Via Twrp Recovery.
- Wipe Dalvik Cache and Reboot.
- Fix Google authorization is required Problem:
o Go To Setting -> Apps -> Force Stop and Clear Data Of (Download Manager, Google Play Store, Google Play Services, Google Services Framework, and Google Account Manager).
o Set up your Google Account again.
o Go to airplane mode, waitting ~5’
o Reboot The Device.
o Come to normal mode
5. Install ROM:
- Download ROM & copy it to internal storage
- Flash the zip Via Twrp Recovery.
Here I have 2 ROM cook:
- NX589J_V2.16_2018.01.09: From SY in chinese forum: I’m using that Rom, it’s ok, but it has T-setting in Chinese language  I extract T-setting to change language but I cant. It also can install Xposed too
- flyme6_NX589J_136fei: I’ve just see this ROM, so I’ve not try it yet
- Rom EN 1.01: shared from NerekPL, I have not installed yet, but the review is ok, i saw the En version 1.04 but cant find link download
- Update ROM EN 1.04 from logosfp: Everything works great with EN_1.04 except... the problem with "always" pending downloads and installations in the Google Play
- Update ROM CN 3.04 from nubia
- Update rom cook CN 3.04 from cwz: fault at panorama camera.
- Update rom CN 3.07 from nubia
- Update ROm Mokee free version by fei
- Update rom EN 1.06
6. Install xposed:
you can install xposed for NX589J, but i think it cant help much.
- installer/ uninstaller xposed 3.1.5 apk from this forum
- install xposed framework in the link above: install through recovery.
Nguồn:
https://www.******.com/root-nubia-z17-install-twrp-gapps/
https://bbs.nubia.cn/thread-1158936-1-1.html
https://bbs.nubia.cn/thread-1184346-1-1.html

Nice work.:good::good::good:
I'll give a try.
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
T-setting's link is broken.

rsinet said:
Nice work.:good::good::good:
I'll give a try.
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
T-setting's link is broken.
Click to expand...
Click to collapse
I can go this normal @@
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
If not, pls tell me, i will reup this
Sent from my NX589J using Tapatalk

dhvminh said:
I can go this normal @@
T-setting: https://www.up-4ever.com/3xsd1jxyiuun
If not, pls tell me, i will reup this
Sent from my NX589J using Tapatalk
Click to expand...
Click to collapse
Sorry. Now its working. Seems to be momentary.
---------- Post added at 03:10 AM ---------- Previous post was at 02:50 AM ----------
Do you know how to delete google account ?
I`m getting "This change is not allowed by your administrator."

rsinet said:
Sorry. Now its working. Seems to be momentary.
---------- Post added at 03:10 AM ---------- Previous post was at 02:50 AM ----------
Do you know how to delete google account ?
I`m getting "This change is not allowed by your administrator."
Click to expand...
Click to collapse
I dont know. But i think u can try removing account in app and using titanium to wipe app data.
Sent from my NX589J using Tapatalk

Thank you very much for the post, @dhvminh:
So far the community around Z17 miniS is small and there no so many ROMs available and users posting about this device, so any contribution is more than welcome.
Which ROM are you currently using? Is it working fine? Do you manage to get the settings in English?
I currently have chinese v2.10 with GApps in my phone but I'm quite disappointed for a number of reasons:
- Battery drains really fast. I have to put the device in "energy save" mode and even this does not make the battery work for more than 6/8 hours.
- I have problem with some Google services.
- Minor bugs when "sharing" things between apps or accessing to media from apps (change the profile picture in several apps doesn't work, for instance).
Is it worthy change to any of the ROMs you mentioned (and which one is the best so far) or it's better to wait until a international ROM is released (by the way, I can't not find it anywhere :crying
The phone looks quite good and the performance is great, as well as the camera but the problems I mentioned make the user experience quite frustrating. I want to believe that we will have improvements in the next months: the phone was released in October 2017 in China and it was just introduced in Europe. So, fingers crossed.
Thanks again.

logosfp said:
Thank you very much for the post, @dhvminh:
So far the community around Z17 miniS is small and there no so many ROMs available and users posting about this device, so any contribution is more than welcome.
Which ROM are you currently using? Is it working fine? Do you manage to get the settings in English?
I currently have chinese v2.10 with GApps in my phone but I'm quite disappointed for a number of reasons:
- Battery drains really fast. I have to put the device in "energy save" mode and even this does not make the battery work for more than 6/8 hours.
- I have problem with some Google services.
- Minor bugs when "sharing" things between apps or accessing to media from apps (change the profile picture in several apps doesn't work, for instance).
Is it worthy change to any of the ROMs you mentioned (and which one is the best so far) or it's better to wait until a international ROM is released (by the way, I can't not find it anywhere :crying
The phone looks quite good and the performance is great, as well as the camera but the problems I mentioned make the user experience quite frustrating. I want to believe that we will have improvements in the next months: the phone was released in October 2017 in China and it was just introduced in Europe. So, fingers crossed.
Thanks again.
Click to expand...
Click to collapse
Now, i'm using this ROM: NX589J_V2.16_2018.01.09. It is rom cook from chinese nubia forum, it changed something in system and can install xposed, ... But, something in setting are chinese, i cant change it to english ( Battery in my phone is ok with my using
U can try Morelocate apk to change ur language, but it is not change all text
What problem GG services do u have? I install open_gapps-arm64-7.1-full-20180207, so dont have any problem.
The flyme ROM just use only 1 sim, however i havenot try it yet.
Is it introduced in Europe? Hope it has international ROM. In discuss, i see the version EN ROM for NX589J, but scare to try ((

dhvminh said:
Now, i'm using this ROM: NX589J_V2.16_2018.01.09. It is rom cook from chinese nubia forum, it changed something in system and can install xposed, ... But, something in setting are chinese, i cant change it to english
Click to expand...
Click to collapse
Are there important settings in chinese?
dhvminh said:
Is it introduced in Europe? Hope it has international ROM. In discuss, i see the version EN ROM for NX589J, but scare to try
Click to expand...
Click to collapse
Do you know where this ROM is? What are you scared to try?

logosfp said:
Are there important settings in chinese?
Do you know where this ROM is? What are you scared to try?
Click to expand...
Click to collapse
This ROM Just added some tweak in setting (T-setting) in chinese language.
ROM EN here: https://forum.xda-developers.com/nubia-z17-mini/help/z17-mini-s-rom-t3758496/page2
I dont know where is the ROM, so i dont want to try

Do you mean NX589J-ENCommonV1.01 ? I just put it in mine. Works perfectly so far. No Gapps bugs, no air plane mode needed. I've just got it from DOT up-4everDOTcom / 27gya085krcw

rsinet said:
Do you mean NX589J-ENCommonV1.01 ? I just put it in mine. Works perfectly so far. No Gapps bugs, no air plane mode needed. I've just got it from DOT up-4everDOTcom / 27gya085krcw
Click to expand...
Click to collapse
) I just recently like rom cook. It's stable with some chinese [emoji3][emoji23][emoji23][emoji23]
Sent from my NX589J using Tapatalk

logosfp said:
- Battery drains really fast. I have to put the device in "energy save" mode and even this does not make the battery work for more than 6/8 hours.
Click to expand...
Click to collapse
Hi, so I found the best way to get decent battery life is to disable wifi (it literally took my phone from 6-8 hours up to a full day easily). I know this isn't ideal for some people and data plans, but while you're out and about, definitely disable the wifi.

Hello, I'm having problems when trying to unlock my device since it's not detected by my PC:
C:\Users\fpr\Downloads\Nubia\platform-tools
λ adb reboot bootloader
C:\Users\fpr\Downloads\Nubia\platform-tools
λ fastboot oem nubia_unlock NUBIA_NX589J
< waiting for any device >
Click to expand...
Click to collapse
USB Debugging and OEM Unlock options are enabled on my device. Any help?

logosfp said:
Hello, I'm having problems when trying to unlock my device since it's not detected by my PC:
USB Debugging and OEM Unlock options are enabled on my device. Any help?
Click to expand...
Click to collapse
1-Turn off your phone and conect the usb cable
2- go to device manager and you will see android warn driver.
3- install Zte-handset-usb-driver-5.2066.1.11
4- Right click in Android warn in device manager and choose update driver
5- choose second option, after second option too
6- choose adb ...... and voila !

diogoasisti said:
1-Turn off your phone and conect the usb cable
2- go to device manager and you will see android warn driver.
3- install Zte-handset-usb-driver-5.2066.1.11
4- Right click in Android warn in device manager and choose update driver
5- choose second option, after second option too
6- choose adb ...... and voila !
Click to expand...
Click to collapse
Thanks @diogoasisti
The Android warning is not shown when I have the phone plugged but turned off but it does when it's switch on.
Do you know which one of the ADB drivers do I have to install? Thanks

logosfp said:
Thanks @diogoasisti
The Android warning is not shown when I have the phone plugged but turned off but it does when it's switch on.
Do you know which one of the ADB drivers do I have to install? Thanks
Click to expand...
Click to collapse
look if you turn on debugging usb
I don't remember if was handset or single.

I think u should uninstall all the zte driver, restart and install it again
Sent from my NX589J using Tapatalk

Hi everyone. Does it have a possibillity to reset fastboot unlock counter?

Link download already dead
all link is dead
please fix it

daniel_hiruko said:
all link is dead
please fix it
Click to expand...
Click to collapse
Check ur connection pls.
All link is live
Sent from my NX589J using Tapatalk