Database Info

[Guide] Upgrade the Motosmart mix XT550 stable, root, memory & fix for issues

Dedicated to my father and all Motosmart MotoMix XT550 Lovers (in other words, not for me LOL)
note: if I repost something, please PM me and I will add in the credits
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You will be doing everything at your own risk.
I, Dark_Cristian cannot be held responsible if you end up damaging or bricking your device.
Until finally I could release 50MB-60MB of memory on the XT550 !!! here the guide as I did .... First of all come to this cost me several reflash to the XT550.
Before starting I recommend to later retrieve synchronize contacts, calendar entries, and other ...
- Flashing the ROM LatAm with RDS ​
firmwares​
LATAM UNBRANDED
LATAM UNBRANDED
LATAM PERSONAL
LATAM Personal Argentina
PASSWORD luuchorocha
RSDlite (I use the 3.5 but someones got problems with it but you can use what you want. In antother places I read what the 6.0 works well)​
RDSlite 3.5
RSDlite search in XDA
open the program and wait for usb recognize
click in the button next to filename text frame '...' and select the firmware file
click in 'start' button
wait to progres fill to 100%
when status reads 'finished' its done :highfive:
First at all, be sure that device drivers are installed properly. If it isn't here can download it
1 Download and install AppLocate.
You can install the cmd.
instructions:
Copy 'Apploc.msi' executable on disk C:
Go to Start and type cmd and hit enter.
When open type cd and press Enter,
Apploc.msi then type and press enter.
Wait until the installation process is complete, and ready, as it was the first step.
2 - Download software called Chinese Romaster.
Mega Mirror here
This is the program that root access on your device.
instructions:
Author Note: sorry i don't speak chinese:silly:
Open the program downloaded and click the blue button.
On the next screen leave it as is and click the blue button.
Wait for the installation process and the following screen.
Clear in italics in the above image, allowing the boot program after installation, if this is going to happen mistake, clear and click the button to close.
In search of a shortcut icon on the desktop that was installed all blue for the program and rename Romaster.
Once installed programs and device drivers connect the USB debugging environment >> Applications >> Development and check the three options.
Connect the USB cable.
Go to Start and type "AppLocale" and open it.
Click Next:
Click on Browse
Find and open the shortcut Romaster:
Click on 'Next' Button:
Finish
Then the program opens to search your device and must be connected via USB cable.
When find it, install both applications on the device, then leave at least 30 MB of internal memory available before starting.
Then the next screen with the device information is displayed:
(in the pic the text reads XT305, but i don't find XT550 rootmaster image... my bad :cyclops
In the image above, click the link marked.
As I already defeated the root link is no longer active, but should appear in the blue, after clicking the link that a confirmation message appears asking if you really want to eradicate this message appears only in Chinese, then click the blue buttons, always without fear.
here a video in youtube for clear some questions
https://www.youtube.com/watch?v=fCMj1n-RuBs
Good luck!

How to remplace the chinese super user by SuperSu from @Chainfire
Thanks to @Chainfire (my respects)
https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=es_419
1- We go to the Google Play Store and downloaded SuperSU
2 - Once downloaded and run it SuperSU we get a screen that says upgrade binaries we touch 'Normal Mode' If the option doesn't work normally , and past 5 minutes (or more) just restarts and retry.
3-Then go to the "Settings" tab and look for the option "default access" and select "Prompt"
4- done this one you see what we will do is install SuperSU in the System folder and Chinese superuser will be deleted leaving for default SuperSU so go where it says "SuperSU installed in / system" asks you a couple of confirmations and if we give the entire phone was restarted and when we turned on the Chinese superuser is deleted and will be installed SuperSU
thank you and excuse me for not putting images is that I was afraid that SuperSU uninstalling and then reinstalling it and take pictures of screen, Root lose but I think the tutorial is quite understandable.

Drawline test solution to the touchscreen calibration screen
DRAW LINE TEST
this issue would not wish on my worst enemy. That let me several nights without sleep and in some moment want to smash the phone to the wall or break it with a hammer (thats the reason of the image above). ok too much bla bla, go to the point. browser by the web (spanish forums because it's my native lenguage and the phone is a masive plague here LOL) I find a solution to this issue (lucky phone It's saved from the hammer).
this one is the drawline test, it's a test which calibrate our touchscreen from the issue of the keyboard mistake letter touch and the crazy recent screen ('pantalla loca' how the follow tuto reads LOL) I don't what this apk do but follow the video steps and you will fix it.
https://www.youtube.com/watch?v=DCxWx-hW0EM

Last step leave stable, and free memory for more apk's
Install Root Explorer, Go Launcher EX, Link2SD, CacheMate and DroidTweaker (you can install apps from Google Play or download them and copy them to the SD card) - started in Link2SD and select EXT2 (you must partition the SD before) - Configure Ex Go Launcher as the default launcher ... Preferences .... Set as default launcher and opens the contextual menu if using always ... (this step is very important because if they are left without launcher to make the next step) - Open Root Explorer and go to / flex / app .... touch where it says Mount R / W .... select all files in that folder and give them move and took them to a new folder inside the SD card. .. There are 2 apps that give error loop if you move it ... give here a while to force close and finally restart the phone .... we will miss several apps ... but do not worry. .. when we started again ... Root Explorer to / sdcard / (folder where you moved the content /flex/app)...
install FileManager.apk
MusicDashboardGlobal_argospin_mdpi.apk (controls the PLAY button)
MusicGlobal_argonspin_mdpi.apk (music player) ...
and if we have Facebook (FBAndroid_1.8.3-preload.apk)
or Talk or Gmail or YouTube or Twitter (I recommend installing the apps that came with the phone and then the update. .. as some gave me error when installing from Play)...
finished installing apps open the DroidTweaker (we ask permission of SU and various checks to make sure we know what we do lol) ...
check Clean Dalvik and give Dalvik Heap Size 40M ....
Apply and restart the phone
- Restarts and go to CacheMate ...
choose it clean and there we see how much memo is .... in my case before updating 84MB at this point we can load apps that we like in the phone ...
in my case install Shazam, Whatsapp, Wifi File Explorer, Dolphin Browser, File Transfer Bluethoot, Notifications and Navitel do .... after we verified that we have not been any updates the Play.
- We again use the CacheMate and ready I stay with 52MB available ... the phone is more fluid than before ... it does not lock and has more resources available ... yet updated and synchronized ... I still test the theme the battery to see how hard without batterymanager I hope that works for someone else ...
Update: in this 4shared folder is all apk and the batery mannager if you want to equilibrate your batery.
you can use batery calibration too.
http://www.4shared.com/folder/n1VE8Wec/Apps.html

epic entropy generator by seeder apk
thanks to @lambgx02
Thread in XDA
http://forum.xda-developers.com/showthread.php?t=1987032
Seeder is an APP created by @lambgx02 It's a scrip based on the original bearing the same name, this simple application works on any Android I rooted.
How does it work?
Sedeer makes adjustments to the Java virtual machine built into Android resulting in increased speed, fluidity and decreased very considerable lag.
Multiple users of XDA Developers have successfully tested and claim that this APP significantly improves performance.

Xposed Frameworks (if u want)
I dont suggest for the inestability but if you want modules to make your phone like a lollipop phone or modify some apk, try it!
XDA Thread
http://forum.xda-developers.com/showpost.php?p=44034334&postcount=2315
INSTRUCTION:-
1. DOWNLOAD THE Xposed installer given in hide content
2. Install it and go to framework and press install/update
3. Wait till it gets finished then reboot the device
4. OPEN the app go to DOWNLOAD section and install the modules u want.
5. Then to activate the modules go to MODULES section and activate it.
6. Open app and make settings of your preference
6. Reboot the device it gets activated and enjoy
Thanks and respects to @rovo89 for this wonderfull mod and @liudongmiao for port it to GB

Lollipop Themes
Go Launcher Ex
https://play.google.com/store/apps/details?id=com.gau.go.launcherex
L Go launcher Theme:
https://play.google.com/store/apps/details?id=com.gau.go.launcherex.theme.Androidl
Xp Theme: 5.0 Lollipop:
https://play.google.com/store/apps/details?id=com.candl.xperia.theme.l.free
Android Lollipop theme:
https://play.google.com/store/apps/details?id=com.campmobile.launcher.theme.androidlollipop

[MOD] Fonts or Font style letter O JB KK
I'm customizing and sharing mods and Apps for the XT550, these sources of letters are best for use with behaus letters or something XD, The question is going to Settings / Display / Sources of letters and no change for behaus or as call.
1 - You have to be root.
2 - Have root explorer.
3 - Make a backup of the Fonts folder located in the System.
4 - Download the files.
5 - Then they go to System / Fonts and paste the downloaded files.
6 - replaced.
7 - Restart the device.
8 - And ready, the lock screen stay more minimalist .. So:
In short, it is much, much more cute ah, and greatly improves if you put the source of behaus letter.
download
https://drive.google.com/file/d/0B9M6olYOFCczWHFfYmYwcWE5RTA/edit?usp=sharing

[CENTRE]HOLO Theme Pack Update[/CENTRE]
A few customs pack to seems GB to ICS
https://forum.xda-developers.com/showthread.php?t=1909047
Credit:
@marinalin85 for the post
@fariz Amran for ICS Dialer and Contacts
@mobint for lockscreen

Hi guy!! What's are password for this firmware? I'm want for this!!
Sorry for my bad english!

feliperock3r said:
Hi guy!! What's are password for this firmware? I'm want for this!!
Sorry for my bad english!
Click to expand...
Click to collapse
The rar password is luuchorocha

push up

Hi i come again to push up this Thread if any is interested

Hola Cristian, gracias por compartir, tendras alguna custom rom para este dispositivo? saludos desde Bs. As.

morris0n said:
Hola Cristian, gracias por compartir, tendras alguna custom rom para este dispositivo? saludos desde Bs. As.
eng: Hi Cristian, thanks for sharing, do you have any custom roms for this device? greetings from Bs. As
Click to expand...
Click to collapse
jajaja un poco tarde la respuesta, no, al menos no sabria decirte, hace mil que no desarrollo para este telefono. Saludos compatriota
Eng: hahaha a little late the answer, no, at least I would not know how to tell you, I haven't developed for this phone for a thousand years. Cheers

UP

UHANS A101 - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Custom ROMs (Android 6.0 and newer)
- Available here: https://forum.xda-developers.com/android/general/uhans-a101-development-roms-recovery-t3532601​
Stock (Android 6.0)
- 20161212: https://mega.nz/#F!WIEWjSZK!vuxDJ9Zxe0Jconapo1pGOA
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20160914: https://mega.nz/#F!zEkEzJjT!bMDlgQJYhSLMWucx1l9EkA -- TEMP. NOT WORKING
- 20160831: https://mega.nz/#!9J10wBzR!tacqbzOZ0xshOyYfpHTuPKXFh2ecgd3rZhvmDvQadHM
- 20160817: https://www.androidfilehost.com/?fid=24591000424958909
Flash Tool
- Flashing Procedure with links inside (HOW-TO): https://mega.nz/#!xREFXJBT!ujYEeaQZtLzDH4UC86Qhlq6D_AdCPeNZmM0NF1x1niM
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.0.2 by @jemmini : https://mega.nz/#!gZsQVTpA!C0FglKk3zChKCAowBVHlky-dxTAbYBQzBzSMGFNXyqg - COMPATIBLE WITH 20160830 ROM​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​

20160817 Stock ROM added to first post.

Official UHANS A101 Firmware Upgrade procedure added to first post!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.nz/#F!zEkEzJjT!bMDlgQJYhSLMWucx1l9EkA

TWRP 3.0.2 added to first post. Thanks @jemmini

Bonjour,
Merci pour ce travail et le partage.

021055 said:
Bonjour,
Merci pour ce travail et le partage.
Click to expand...
Click to collapse
English please, thank you.

Hello,
Thank you for this work and sharing.

021055 said:
Hello,
Thank you for this work and sharing.
Click to expand...
Click to collapse
You're welcome. Keep following this thread for more upcoming updates

I am looking to root my A101!
Not sure where to start really. I have a picture here, it seems to be a custom build - https://drive.google.com/open?id=0B7S5oVxYtbTWSUUxS3BoZTBaT0U

Buying Uhans A101
And how you can redeem Uhans A101 directly from the manufacturer? Like it!

I've tried to root the phone to delete de Youtube application and install the latest version.
The phone is updated to V3.07 (2016-09-20 version)
I've tried to "fastboot oem unlock" to install TWRP, but it fails with "Unlock operation is not allowed"
Do i need to flash the V3.05 version posted here before?
Thanks

Hi all,
I have made some more tests this morning about the YouTube App problem :
1./ YouTube app version is Not up to date, and not possible to update :
The Uhans A101 phone YouTube App installed version is 5.7.41 (very old, or "hybrid home made version" ?)
It is not shown on the Google PlayStore in my installed apps, as if it was not installed properly.
So it can NOT be updated at all, on the Goolge PlayStore, as it sould be.
The official YouTube app most recent version on the Google PlayStore is 11.35.60, very far from the 5.7.41 of the Uhans A101
I noticed that the Android task killer apps do not see the YouTube app, and this is not normal either.
2./ YouTube user account connected causes YouTube App screen freezes :
I noticed that when the YouTube user account was Not connected, the YouTube app plays videos correctly with no problem !
When we connect to the YouTube user account, the YouTube app of Uhans A101 (version 5.7.41) can't play videos, and freezes, and the screen is blocked !!
To reproduce the screen freezes of the YouTube App you can run the following tests :
Insert a sim card (facultative)
Log on to the Google PlayStore account with user and password (as every customer does)
Open Youtube
++Connect to the Youtube user account (same user account as the Google PlayStore and Gmail)
And try to play different videos, different sizes, quality and length
Then you should get a screen freeze and YouTube app is blocked !
Any customer is connected to their Google PlayStore, and Gmail, and YouTube account.... so they will have the same YouTube app Freezes.
So YouTube app on Uhans A101 is definitely a problem on all the Uhans A101 at the moment.
What can we do please ?
Thank you in anticipation.

Agnes Stewart said:
And how you can redeem Uhans A101 directly from the manufacturer? Like it!
Click to expand...
Click to collapse
???
sergio.otero said:
I've tried to root the phone to delete de Youtube application and install the latest version.
The phone is updated to V3.07 (2016-09-20 version)
I've tried to "fastboot oem unlock" to install TWRP, but it fails with "Unlock operation is not allowed"
Do i need to flash the V3.05 version posted here before?
Thanks
Click to expand...
Click to collapse
There is no need to execute that command.
Just install TWRP with SP Flash Tool and use adb to manage it because the touchscreen isn't working yet.
Seb14 said:
Hi all,
I have made some more tests this morning about the YouTube App problem :
1./ YouTube app version is Not up to date, and not possible to update :
The Uhans A101 phone YouTube App installed version is 5.7.41 (very old, or "hybrid home made version" ?)
It is not shown on the Google PlayStore in my installed apps, as if it was not installed properly.
So it can NOT be updated at all, on the Goolge PlayStore, as it sould be.
The official YouTube app most recent version on the Google PlayStore is 11.35.60, very far from the 5.7.41 of the Uhans A101
I noticed that the Android task killer apps do not see the YouTube app, and this is not normal either.
2./ YouTube user account connected causes YouTube App screen freezes :
I noticed that when the YouTube user account was Not connected, the YouTube app plays videos correctly with no problem !
When we connect to the YouTube user account, the YouTube app of Uhans A101 (version 5.7.41) can't play videos, and freezes, and the screen is blocked !!
To reproduce the screen freezes of the YouTube App you can run the following tests :
Insert a sim card (facultative)
Log on to the Google PlayStore account with user and password (as every customer does)
Open Youtube
++Connect to the Youtube user account (same user account as the Google PlayStore and Gmail)
And try to play different videos, different sizes, quality and length
Then you should get a screen freeze and YouTube app is blocked !
Any customer is connected to their Google PlayStore, and Gmail, and YouTube account.... so they will have the same YouTube app Freezes.
So YouTube app on Uhans A101 is definitely a problem on all the Uhans A101 at the moment.
What can we do please ?
Thank you in anticipation.
Click to expand...
Click to collapse
Without root you can't do anything for now.

Ok, i've managed to update the Youtube App.
After some tests, these are the steps i've followed after having drivers and things downloaded.
Remember, when using SP Flash Tool, always phone switched off and without battery
It's recommended to follow the steps to backup your NVRAM: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Steps to update Youtube:
Open SP Flash tool and go to "Download" tab
Download-agent: MTK_AllInOne_DA.bin
Scatter: MT6737M_Android_scatter
Check only "recovery" checkbox and in the same row select recovery.img from TWRP folder
Select "Download only" in the combo
Click "Download"
Connect the phone (switched off!!) and wait for a big Ok message
Close SP Flash Tool
Put the battery back and press and hold up & power until 3 options appear. Select "recovery" following the instructions (trying to boot normally and then using "adb reboot bootloader" has worked 1 time for me. It seems the system is replacing recovery to stock.
Optional: make a backup with TWRP: "adb shell" and then "twrp backup XXX" (haven't found nor tried what to put after backup)[/B]
Upload SuperSu with: "adb push SuperSU-v2.78-201609011115.zip /sdcard"
Install it via TWRP: "adb shell" and then "twrp install /sdcard/SuperSU-v2.78-201609011115.zip"
Reboot with "adb reboot"
Install "System app remover", the free version
Select "Youtube" and uninstall, granting supersu permissions when asked.
Reboot the phone
Install Youtube from the market and enjoy
EDIT: funny thing, in other phone before updating i've applied the same steps and now when restarting to update, it appears TWRP always and installation fails. So i don't know why in the other phone TWRP disappeared twice and how to update the phone (it can be restarted and works ok with old version)

So can somebody write full tutorial for systemless root? I tried booting into recovery,but twrp logo just keeps flashing.What did i do wrong?

InfcBear said:
So can somebody write full tutorial for systemless root? I tried booting into recovery,but twrp logo just keeps flashing.What did i do wrong?
Click to expand...
Click to collapse
What do you want to accomplish? In order to uninstall the Youtube app, you need root

sergio.otero said:
What do you want to accomplish? In order to uninstall the Youtube app, you need root
Click to expand...
Click to collapse
i wanted to root it but i have twrp problem.
But i will wait for ota update
Code:
Hello,
Thanks for your information.
please kindly wait for the new software released soon, the problem is sovled.
Thank you for your patience.

InfcBear said:
i wanted to root it but i have twrp problem.
But i will wait for ota update
Code:
Hello,
Thanks for your information.
please kindly wait for the new software released soon, the problem is sovled.
Thank you for your patience.
Click to expand...
Click to collapse
You can follow my steps a few posts back. TWRP has to be flashed via SP Flash tool.

sergio.otero said:
You can follow my steps a few posts back. TWRP has to be flashed via SP Flash tool.
Click to expand...
Click to collapse
I did,but like i wrote. My problem is on twrp starting up.
I noticed something. Over night my phone used like 15℅ of battery,7℅ phone idle and 7℅ wifi. What is good app for monitoring which app doen't let phone to deep sleep? Did somebody check is there any weird connections that could potentaly spy us? @sergio.otero can you scan rooted phone for malicious stuff with AV?
As you can see,no deep sleep
Sent from my A101 using XDA-Developers mobile app

Software Development Joying Extra Tools apk - an apk to help you install mods, tweak your unit, etc.

Hi,
Below the latest versions of the "Joying Extra Tools" apk.
20 May 2020: V76
22 December 2019: V75
17 October 2019: V74
16 September 2019: V73
10 August 2019: V72
21 July 2019: V71
30 June 2019: V70
30 June 2019: V69
05 June 2019: V68
Website
Changelog: at the bottom of this post (latest release) and completely on the github website.
Credits.
Info on options (can hardly be called a manual).
Source code: Everything is in one big Appinventor/Thunkable .aia source code file.
Root your unit (Read how) with this apk and the "SuperSU Version x.y.z" from the Releases page.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It requires a rooted unit for most of the functionality. Read here.
It is created for Joying Intel Sofia 3GR FYT units, the Joying Rockchip PX5 FYT units and the Joying Intel Airmont sp9853i units . Most functionality will probably run just as well on other brand FYT units but for the time that is only functional for a few number of other FYT based units (The app tests whether it is running on a Joying or one of the other supported FYT based units like Zhan PX5, Sinosmart SC9853i and 2 "unbranded" SC9853i units).
Some functionality is the same for 5.1.1, 6.0.1, 8.0.0 and 8.1.0. The apk will detect wich Android version and on which hardware you are running and will offer the correct relevant options for your android version and unit.
It allows you to:
Enable or disable adb over WiFi
Install the Xposed framework and installer (EXPERIMENTAL on Sofia requiring Superuser rooting specifically ; stable on PX5 but requiring SuperSU "setenforce 0" rooting)
Install some specific Xposed modules not in the global Xposed repository pool.
Update busybox
Install Viper4Android on 5.1.1 ROMs (Joying/FYT blocked this on 6.0.1, 8.0.0 and 8.1.0)
Install several "main server" mods (Sofia-Server on Sofia 3GR; 100000000_com.syu.ms on PX5; 190000000_com.syu.ms on sp9853i)
Install Radio mods (examples)
Install other mods (examples)
Add mod to make it possible to put Bluetooth apk to background during call (PX5; standard on 9853i ROMs as of 12 June 2019 firmware)
(Continuously) measure temperatures of your unit
Alter the DPI of your unit
Expand the hosts file to prevent ads, banners, hijackers, etc. (see http://winhelp2002.mvps.org/hosts.htm)
Some micro apks like BTMusicStarter, WiFiOn, WiFioff to make live easier on the Joyings.
Optimization: Remove/disable non-functional system services and apps, and non-functional Joying apps
Set system wide immersive modes
You can also have a look at a really early version here on youtube.
Changelog latest version:
20 May 2020, V76
9853i: Add main server mods for 07 April 2020: Original, Original with "extended navi_app list, unkill_app.txt, player_app.txt and navi_audio_from_playstatus.txt", Nokill mod with the txt files from "extended".
Previous Changelogs:
See my website.
This apk is open source and will remain open source, but if you want you can donate something.

Been reading all the threads on the Joying as they are the only ones who make a single din with an adjustable screen as nothing else will fit...
This looks like it will help a lot
Will be ordering it over the next few days, just have to decide on which android version. Hopefully once I have one a lot of what you have all been doing will make more sense and I will pick it all up

This is awesome. You've helped alot of people with their units, thanks and keep up the good work!

THANKS!!! I will test it out. Does the enable and disable of adb also restart the server? I have had issues where ABD stops responding for no reasons.

dyabolikarl said:
THANKS!!! I will test it out. Does the enable and disable of adb also restart the server? I have had issues where ABD stops responding for no reasons.
Click to expand...
Click to collapse
Yes,it does.
The enable does
Code:
setprop service.adb.tcp.port 5555
stop adbd
start adbd
The disable does
Code:
setprop service.adb.tcp.port -1
# If it was set persistent, make sure to switch it off
setprop persist.adb.tcp.port -1
stop adbd
start adbd
As you can see I use "service.adb.tcp.port" instead of "persist.adb.tcp.port". The "persist" setting makes the setting "for always", so also through reboots.
The "service" setting is a setting active until the next reboot.
The "service" setting is safer, but maybe a bit too much. I'm doubting whether it should become a multi-select as well "enable permanenly/temporary", "disable permanently/temporary".

this is the coolest app i have ever seen that was made with app inventor! great work! thanks a bunch!

I did a few improvements.
That means: it works flawless for me. I hope it does for others.
See updated first post with Changelog.

Looks great. Thank!

@surfer63 I'm getting era when trying to root my HU JY-UM135N2
I unzip file open cmd as a administrator copy_install to cmd and it says system cannot find path specified. I have adb over WiFi enable and show up address apk. here is. screen shot
Sent from my Pixel XL using Tapatalk

freddienuxx said:
@surfer63 I'm getting era when trying to root my HU JY-UM135N2
I unzip file open cmd as a administrator copy_install to cmd and it says system cannot find path specified. I have adb over WiFi enable and show up address apk. here is. screen shotView attachment 4196251
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
What did you download?
The SuperSU V2.82 SR1 from the Releases page?
The error you get is that the adb.exe can't be found, so I wonder what you downloaded, or how you unzipped it.

Thanks a lot for yor effort! Already istalled and changed the radio app on my 124N2 . Great work.
Two things came across my mind: Please mention somewhere in your description that the user should be logged into a WLAN to allow Joying_extra_tools to download the wanted .apks (didn't found that. Well it's obvious, but sometimes it's bettter to avoid misunderstandings). Second: Can you implement a "reboot button"? This way yo can be sure people reboot and not just switch off/on.
Thanks again from a happy Joing user ?

AP756 said:
Thanks a lot for yor effort! Already istalled and changed the radio app on my 124N2 . Great work.
Two things came across my mind: Please mention somewhere in your description that the user should be logged into a WLAN to allow Joying_extra_tools to download the wanted .apks (didn't found that. Well it's obvious, but sometimes it's bettter to avoid misunderstandings). Second: Can you implement a "reboot button"? This way yo can be sure people reboot and not just switch off/on.
Thanks again from a happy Joing user
Click to expand...
Click to collapse
I will mention the WLAN necessity. To me it was completely obvious, but you are right. It will mention it on the website
I have a WiFi option in the Top-left menu. I will use the functionality on startup like: "Hey user. You don't have an active WiFi connection. blah blah blah"
The reboot button is already integrated in the actions, but I need to change a lot of "feedback" screens like
Code:
"This has been done. The unit needs to be rebooted."
[reboot] [No, I do it later]

surfer63 said:
What did you download?
The SuperSU V2.82 SR1 from the Releases page?
The error you get is that the adb.exe can't be found, so I wonder what you downloaded, or how you unzipped it.
Click to expand...
Click to collapse
I actually downloaded the first root kit root master and the second one as well SuperSU . i downloaded to download folder unzipped it with WinZip and unzipped in same place/downloaded folder copy install.bat to cmd and I get that error. I forgot to mention unzipped it into downloaded wit no folder.
Sent from my Pixel XL using Tapatalk

surfer63 said:
I will mention the WLAN necessity. To me it was completely obvious, but you are right. It will mention it on the website
I have a WiFi option in the Top-left menu. I will use the functionality on startup like: "Hey user. You don't have an active WiFi connection. blah blah blah"
The reboot button is already integrated in the actions, but I need to change a lot of "feedback" screens like
Code:
"This has been done. The unit needs to be rebooted."
[reboot] [No, I do it later]
Click to expand...
Click to collapse
Hey, thanks for the fast feedback. Installed Viper right now and had no issues at all. Regarding the reboot option I think I missed it, because I use a large font. I didn't see that...
Greetings

freddienuxx said:
I forgot to mention unzipped it into downloaded wit no folder.
Click to expand...
Click to collapse
That was wrong. It is based on the folder structure. I hate it when it becomes one big mess, instead of a nicely separated "tools" and "stuff" setup.

AP756 said:
Hey, thanks for the fast feedback. Installed Viper right now and had no issues at all. Regarding the reboot option I think I missed it, because I use a large font. I didn't see that...
Click to expand...
Click to collapse
No, typo in the command parameter for the popup. I will correct it.

Hey Guys.
Yesterday my Radio.apk was gone after a reboot.
I installed the blue-white mod a day before.
Did this ever happens to anyone else?
Now i did reset all and installed again everything and hope that it won`t dissapear again. Maybe i freezed something wrong with Titanium Backup.
Thx

f1nch87 said:
Hey Guys.
Yesterday my Radio.apk was gone after a reboot.
I installed the blue-white mod a day before.
Did this ever happens to anyone else?
Now i did reset all and installed again everything and hope that it won`t dissapear again. Maybe i freezed something wrong with Titanium Backup.
Click to expand...
Click to collapse
When reporting these kind of things, please also mention what you did, how you did it, on which ROM version (5.11/6.0.1, which date) (and if relevant using which version of my apk). Your "report" makes it hard to diagnose as we need to ask all kind of counter questions to get relevant info.
Do you mean you used my app to install the blue-white mod?
Did you reboot immediately after the install, or was the "next day reboot" your first reboot?
Did you use the 1.0 or the 1.01 version of my apk?
What do you mean with "reset all and installed everything again"? I hope you don't mean you flashed the entire ROM, or did a factory reset? There is always the possibility to re-install the original radio apk, also from my apk.

surfer63 said:
When reporting these kind of things, please also mention what you did, how you did it, on which ROM version (5.11/6.0.1, which date) (and if relevant using which version of my apk). Your "report" makes it hard to diagnose as we need to ask all kind of counter questions to get relevant info.
Do you mean you used my app to install the blue-white mod?
Did you reboot immediately after the install, or was the "next day reboot" your first reboot?
Did you use the 1.0 or the 1.01 version of my apk?
What do you mean with "reset all and installed everything again"? I hope you don't mean you flashed the entire ROM, or did a factory reset? There is always the possibility to re-install the original radio apk, also from my apk.
Click to expand...
Click to collapse
Sorry for my inacurate question
So. I am on Android 6.0.1 official Joying, Version of May 25th.
I have it succesfully rooted and installed the Radio.apk (Blue-White) with your Joying Extra Tools 1.01.
I also changed DPI to 200.
The App did not dissapear after a immediately reboot. It happened after the car was turned off one night and then the HU reboots Android and it was gone.
And yes i then did flash the rom again then.

f1nch87 said:
Sorry for my inacurate question
So. I am on Android 6.0.1 official Joying, Version of May 25th.
I have it succesfully rooted and installed the Radio.apk (Blue-White) with your Joying Extra Tools 1.01.
I also changed DPI to 200.
The App did not dissapear after a immediately reboot. It happened after the car was turned off one night and then the HU reboots Android and it was gone.
And yes i then did flash the rom again then.
Click to expand...
Click to collapse
Thanks for the report
Apart from the fact that this should not have happened, the best approach here would have been to install the "Joying Default" from my apk. We have had several issues where my radio mod does work for one person and not at all for another (from my previous scripts). However, a re-install from the original radio apk always fixed the issue.
Anyway, I will continue to try to find the issue why it sometimes fails. I guess it has to do with the underlaying CarRadio app that does the real work, and the Radio app just being the GUI to it.

GApps and MoreLocale2 Installer + Debloater for Le Pro 3 AI x7 (x650 / x651) w/o ROOT

Automated GApps and MoreLocale2 Installer + Debloater
for Le Pro 3 AI x7 (codename x650 / x651) without ROOT
...but it is suitable for any ARM64 Android 6+ device without ROOT
to run ONLY under Linux OS x64​
Updated post! All further improvements and corrections will be published here.
Linux Script Version 0.1.8 | Developed by: @dilnix in assistance of @master_lie
The Google Apps version of 06/15/2018
Linux dependencies: android-tools
Windows version you can find on 4pda or in the following post of this thread<-- WINDOWS VERSION
Temporary the Windows version placed HERE
Installs and removes a sample Google Apps package, as well as MoreLocale2, with all necessary permissions to these applications.
And also, it allows to partially remove and freeze most unnecessary Chinese programs.
Remember, it will not return your already uninstalled apps!
DOWNLOAD: FEX || MEGA
For start:
0) Have a USB-connected smartphone, with an already-enabled and authorized USB debug running on the stock EUI without installed GApps and MoreLocale2.
1) Unpack the archive anywhere and go to the appeared folder "ML2-GApps-Debloat".
2a) Open the terminal (console) from this folder and run the script file:
Code:
./ML2-GApps-Debloat-Linux.sh
OR...
2b) Simply "Run the file in the terminal window (console)" from the context menu of the file manager by right clicking on the mentioned file.
After the launch, you will get into a simple text menu with a choice of further installation steps.
After installing any of the Google Apps options your smartphone will be rebooted!
All applications are installed by the script in the User Space, and they are not afraid of a typical system update.
Menu options:
1) Check_ADB
2) Install_only_ML2 (Install only MoreLocale2)
3) Install_ML2+CoreGApps (Install MoreLocale2 and Core Google Apps)
4) Install_ML2+CoreGApps+ExtraGApps (Install MoreLocale2 and Basic Google Apps and Additional Google Apps)
5) Install_only_CoreGApps (Install only Basic Google Apps)
6) Install_only_ExtraGApps (Install only Additional Google Apps)
7) Install_CoreGApps+ExtraGApps (Install only Basic Google Apps and Additional Google Apps)
8) Remove_ML2 (Remove only MoreLocale2 without reboot)
9) Remove_GApps (Remove Core and/or Additional Google Apps with reboot)
10) Remove_ALL (Remove All Google Apps and MoreLocale2 without questions but with reboot)
11) Debloat_Menu -------
..............................................................|
..............................................................| This submenu contains options:
..............................................................|
..............................................................1) Uninstall_Chinese (just few boring apps without reboot)
..............................................................2) Hide_Minimal_LeEco (part of LeEco apps that is most useless without reboot)
..............................................................3) Hide_All_LeEco+MTK_Services (All of LeEco & MTK apps and services without reboot)
..............................................................4) Hide_LeEco_Browser (without reboot)
..............................................................5) Hide_LeEco_Launcher (without reboot)
..............................................................6) Hide_LeEco_Music (without reboot)
..............................................................7) Hide_LeEco_SuperManager (without reboot)
..............................................................8) Hide_LeEco_Calendar (without reboot)
..............................................................9) Hide_LeEco_Email (without reboot)
..............................................................10) Hide_LeEco_VideoPlayer (without reboot)
..............................................................11) Return_to_Main_Menu
12) UnHide_Menu -------
..............................................................|
..............................................................| This submenu contains options:
..............................................................|
..............................................................1) UnHide_Minimal_LeEco (part of LeEco apps that is most useless without reboot)
..............................................................2) UnHide_All_LeEco+MTK_Services (All of LeEco & MTK apps and services without reboot)
..............................................................3) UnHide_LeEco_Browser (without reboot)
..............................................................4) UnHide_LeEco_Launcher (without reboot)
..............................................................5) UnHide_LeEco_Music (without reboot)
..............................................................6) UnHide_LeEco_SuperManager (without reboot)
..............................................................7) UnHide_LeEco_Calendar (without reboot)
..............................................................8) UnHide_LeEco_Email (without reboot)
..............................................................9) UnHide_LeEco_VideoPlayer (without reboot)
..............................................................10) Return_to_Main_Menu
Google Apps Packages:
Core Google Apps: GoogleBackupTransport.apk, GoogleContactsSyncAdapter.apk, GoogleLoginService.apk, GoogleServicesFramework.apk, Phonesky.apk, PrebuiltGmsCore.apk
Additional Google Apps: CalendarGooglePrebuilt.apk, GoogleCalendarSyncAdapter.apk, LatinImeGoogle.apk
All questions and support: in this thread of the forum, as well as in the Telegram group "dilnix_LiteMod_EUI" (answering not fast).
Language of informing by script: English.
Inspired by: 4pda community
It is possible to update the script in the future for EUI with Root system access, and to add more functionality.

With today update of v0.1.6 we did:
- options to remove GApps and MoreLocale2 options
- all code optimized and re-visioned
Please enjoy!

With today update of v0.1.7 we added:
- option to remove few Chinese bloatware applications
- options to hide most of LeEco apllications and services
Please enjoy!
Also I prepared a Video manual of:
- installing EUI 5.9.025S via Fastboot
- updating to EUI 5.9.028S via OTA
- removing and hiding most of useless applications with using a tool of topic
- installing GApps with using a tool of topic
Hope you will like it.

*

We say thank you for the much work what you put into it !! :jó:

I'm glad to see it helps you =)
Developing Linux and Windows versions of tool will be separated soon at 4pda. But I hope we'll keep publishing it together here after adding more features.

Kind dilnix, thank you it till now work with what you helped a lot. We would be glad if you would publish your work here in the additional ones because the 4pda-ra to register and to enter rather difficult if somebody does not can in Russian and he does not have a Russian keyboard. Excuse me for the bad English text. With thanks and gratitude!! :good:

msaca said:
Kind dilnix, thank you it till now work with what you helped a lot. We would be glad if you would publish your work here in the additional ones because the 4pda-ra to register and to enter rather difficult if somebody does not can in Russian and he does not have a Russian keyboard. Excuse me for the bad English text. With thanks and gratitude!! :good:
Click to expand...
Click to collapse
Don't be afraid. All my results with x7 device will be published on XDA too.
Nice to see that tool is good for you =)

Thanks Dilnix. Following your thread man. I'll rate this

pls help
i cant run "ML2-GApps-Debloat-Windows.exe". it keeps on closing up..please help

Mysiopao said:
i cant run "ML2-GApps-Debloat-Windows.exe". it keeps on closing up..please help
Click to expand...
Click to collapse
It could be your PC. try to re-download or use a different PC if you have it available man.

Mysiopao said:
i cant run "ML2-GApps-Debloat-Windows.exe". it keeps on closing up..please help
Click to expand...
Click to collapse
please tell me more details,
what is OS version?
did you enabled some options in the file properties, for example, about compatibility?

this is fantastic!
bro you save my life and other user
that number 18 disabled the launcher making it blank on startup funny. i thought i got boot loop im surprised someone call me and noticed that the launcher is missing need to figure how to reformat the phone pressing power button and up go to recovery delete user. try again to install. from option 2 ML2+coreapps then do the debloat use the 15 16 and 17 only. im scared to tried that one again number 18 option
kudos to you:good:

cant install OTA nor install 5.9.25s using PC
i want to install the latest rom for my lex653 4 32GB with new EUI 5.9.28s. I have downloaded the zip file and copy it to my phone, then change the name into update.zip. I wipe out all my data and then update. But it failed when i try to install and then nothing change with my EUI. Then, i found this thread. Then i try to install EUI 5.9.25s with PC. But it always failed because the fastboot and the device didnt match. Please help to solve the problem please!!!:crying::crying::crying:

Hi!
I'm having a problem with executing of gapps file. It keeps on closing.
It says that
C:\users\user\Destop\New' is not recognized as internal or external command
operable program or batch file.
please help me

I hide some more apps and no error encounter:
com.android.calculator2 --> i don't like this calculator
com.android.email --> I use gmail
com.android.gallery3d --> I don't use this gallery
com.letv.android.filemanager --> I use mixplorer
com.letv.android.personalized --> I don't know, i can still open in settings
com.letv.android.themestore --> same as before
com.letv.android.videoplayer --> I use vlc
com.letv.domain --> I don't know
com.letv.leui.sdk.data --> I don't know

Hello dilnix, I am sorry to bother you, but since I can not register in 4pda I ask you around here.
It is true that leeco has sent the source code of the x650 to a 4pda developer?.
A greeting.

kaku1237 said:
bro you save my life and other user
that number 18 disabled the launcher making it blank on startup funny. i thought i got boot loop im surprised someone call me and noticed that the launcher is missing need to figure how to reformat the phone pressing power button and up go to recovery delete user. try again to install. from option 2 ML2+coreapps then do the debloat use the 15 16 and 17 only. im scared to tried that one again number 18 option
kudos to you:good:
Click to expand...
Click to collapse
I do the same this on linux version with 11 > 6, so reformat the cellphone and before de bloat install the Now Launcher bay play store and set as default. then hide Le Eco Launcher.

Then i try to install EUI 5.9.25s with PC. But it always failed because the fastboot and the device didnt match. Please help to solve the problem please!!!
Click to expand...
Click to collapse
When you in Fastboot mode, what is output of following command?
fastboot oem device-info
I'm having a problem with executing of gapps file. It keeps on closing.
It says that
Click to expand...
Click to collapse
You just need to run it from path that excludes any special symbols and spaces.
It is true that leeco has sent the source code of the x650 to a 4pda developer?
Click to expand...
Click to collapse
No, it's not true. Nobody from 4PDA mentioned about that. If somebody got source code and keeping silent it's not good and shame on them but it's all I know.

I have success to install 5.9.025s china roms then use ML2 debloat apps. It works well and i have hide the launcher just like the tutorial. And then, when im playing games. I realize that the super manager (phone manager) has gone. Could you put back the phone manager please or dont include it in the option. Because with phone manager, the phone can enter the high performance mode so the game will not laggy. Im really disappointed because the super manager has gone. Please help.

[Tutorial] [Root] How to configure 'Microsoft Intune' to make it work with 'Magisk' (Update: Q1/2023)

Update 04.01.2023: I've updated/added additional steps to make this tutorial work again.
This question was asked many times and often all the answers did not work:
How do I get Magisk to work with Microsoft Apps like Microsoft Teams, Microsoft Outlook etc (protected by Microsoft Intune)?
With Magisk 24.1 it is finally possible to bypass the protection of Microsoft Intune. Here are the instructions on how to proceed. The solution requires root!
- First of all you need the latest Magisk version (24.2 or higher).
After installation select:
- Settings -> Hide the Magisk app : Select a new name of your choice (I use 'MM' for 'Magisk Manager')
- After Magisk has been hidden open 'Settings' and enable 'Zygisk (Beta)'
- uncheck Force Denylist in Magisk settings
- Select 'Configure DenyList'
- Use the magnifying glass and search for "Microsoft". You will find "Company Portal" (also known as Microsoft Intune).
Important: Expand the view by clicking on the entry. You will see something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Now, with the expaned view, click the entry. It will look like this:
- Repeat these step (first expand, then clicking the button) on each other Microsoft App - e.g. Microsoft Teams, Microsoft Outlook, ...
Important: If you do not expand the view it will not work!
Now, to make sure that this solution is really working ....
- Install YASNAC - Yet Another SafetyNet Attestation Checker from the Google Play Store.
- Run the SafetyNet Attestation on YASNAC
When it fails is shows something like this:
Fix Basic integrity
- To fix the Basic integrity you need to install the latest Universal SafetyNet Fix from Github.
- Download the ZIP and install it as a module in Magisk (24.1 or higher).
- Reboot again and restart the YASNAC - Yet Another SafetyNet Attestation Checker. It should now pass (at least) the Basic integration.
If this is not the case you might also need to fix your CTS profile match. You can resolve this by doing the following steps:
- Download and install the latest release of MagiskHide Props Config from Github in Magisk as a Module.
- Restart your Phone!
- Launch a Terminal of your choice (e.g. Termux, Android Terminal Emulator, ...).
- Type 'su' (enter) and agree to the root dialog.
- Now type 'props' (enter) ...
... select '1' for Edit device fingerprints
... select 'f' for Pick a certified fingerprint
... select a vendor of your phone (e.g. Xiaomi, Poco, Google, Samsung, Oneplus ...)
... select your phone (if available) or a phone which is next to your phone with your installed Android version (for example 9,10,11).
- After selecting the fingerprint for your device, and when the program ends, reboot your device
After reboot another check of YASNAC - Yet Another SafetyNet Attestation Checker should the look like this:
Update 04.01.2023:
- Install Shamiko and make sure that you uncheck Force Denylist in Magisk settings
Important:
Once YASNAC shows Pass on Basic integrity and CTS profile match you can use any Banking App (e.g. Google Pay, N26, DKB, Sparkasse, Revolut, bunq, <whatever>) by repeating the inital steps for each of these Apps and it should not detect root. You might need to clear the data before the app stops complaining about a rooted device (example Google Pay).
If you find this tutorial helpful please leave a like for this post - thanks in advance.

More Informations / Background / How does this work:
Magisk: The Age of Zygsik
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Magisk Hide Props Config - SafetyNet
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com

Hi @GoodSoul nice method- same as my posting from back 2+ weeks ago
Thanks for the repost! It's a proven working method
Zygisk (Alpha channel) + Magisk Hide app stting + DenyList + (MagiskHide Props Config (add fingerprint) + Universal SafetyNet Fix)
Click to expand...
Click to collapse

skuppej said:
Hi @GoodSoul nice method- same as my posting from back 2+ weeks ago
Thanks for the repost! It's a proven working method
Click to expand...
Click to collapse
Hey skuppej, did not see your post, sorry. Was it also (mainly) about Microsoft Intune? Because Magisk Hide did work well in the past on Banking Apps and Google Pay but somehow not well on MS Intune.

Oh, this method is what you should use to hide root from anything
tldr:
Zygisk (Alpha channel) + Magisk Hide app stting + DenyList + (MagiskHide Props Config (add fingerprint) + Universal SafetyNet Fix)
Click to expand...
Click to collapse

Hi,
I've exactly followed the steps mentioned but InTune still detects root.
I've InTune v5.0.5421 installed and Magisk v24.1 installed.
The only difference from your screenshots is that you've evaluation type HARDWARE_BACKED, I've BASIC. The rest is same. My phone is S9 with Stock Android 10 installed.
Do you have any suggestion to check?

This did work, but for some reason as soon as I enable Enforce Deny list, I get extreme lag. Without that option enabled phone woks fine but intune detects root and blocks. I really wish there was a better solution, this never was an issue with MagiskHide

hmm. Update. For literally no reason with nothing changed it just stopped working...No idea why

elite-fusion said:
has anyone had luck with this lately?
I tried the 5067 version and it worked, but teams and outlook still stated that the intune is out of date, so still unusable.
Click to expand...
Click to collapse
persmash said:
Hi,
I've exactly followed the steps mentioned but InTune still detects root.
I've InTune v5.0.5421 installed and Magisk v24.1 installed.
The only difference from your screenshots is that you've evaluation type HARDWARE_BACKED, I've BASIC. The rest is same. My phone is S9 with Stock Android 10 installed.
Do you have any suggestion to check?
Click to expand...
Click to collapse
Make sure you guys clear data in your intune/teams apps, first. Also, delete any work accounts that might pre-exist, if you have them.

skuppej said:
Make sure you guys clear data in your intune/teams apps, first. Also, delete any work accounts that might pre-exist, if you have them.
Click to expand...
Click to collapse
Hi,
Thanks for your reply but InTune doesn't give an error related to rooting. It says the OS is modified and I think that is because of system status is "Custom". I'm searching for a way to make it "Official" again without loosing root but couldn't find anything.

I am on zygisk denylist + shamiko + ticking all processes in denylist
I have also installed universal safetynet but removed it as it doesnot make a difference and i donot have an issue to fail safetynet for now
I am passing intune and Outlook app only
However Onedrive , Office and Teams says i am having policy error and refuse to log in
I would appreciate any assistance as it is crucial for my work environment

Have people gotten this to work on the latest version of Intune (5.0.5421.0)? Root is still being detected on my Google Pixel 4a and 5. I read in the other thread to use an older version of Intune, but my company Intune policy will not allow it (get a Company portal out of date message).

My Intune is updated to 5.0.5421.0 and Teams is still working on all my devices (Oneplus 7, Samsung Tablet A6, Samsung Galaxy S8+ - all with LineageOS 18.1).
For those who have problems: What does 'adb logcat' says in the moment when you launch teams?

GoodSoul said:
My Intune is updated to 5.0.5421.0 and Teams is still working on all my devices (Oneplus 7, Samsung Tablet A6, Samsung Galaxy S8+ - all with LineageOS 18.1).
For those who have problems: What does 'adb logcat' says in the moment when you launch teams?
Click to expand...
Click to collapse
Hi,
I don't have that much technical knowledge. Could you please guide me how can I record the logs so that I can share it here?
Thanks.

persmash said:
I don't have that much technical knowledge. Could you please guide me how can I record the logs so that I can share it here?
Click to expand...
Click to collapse
Try one of these tutorials.

Hey,
I am still using Magisk 23.0 and recently also my Outlook and Teams started crying about my rooted devices. But I have a strange behavior: If I click away this message 2-3 times everything works fine ¯\_(ツ)_/¯.
Anybody else who notices this behavior?
@GoodSoul Is this meant to be work also within the Android Enterprise environment? I mean this thing which is encapsulated from the rest of the system like I would create another user.

tiga05 said:
@GoodSoul Is this meant to be work also within the Android Enterprise environment? I mean this thing which is encapsulated from the rest of the system like I would create another user.
Click to expand...
Click to collapse
I don't know why it should not.

GoodSoul said:
Try one of these tutorials.
Click to expand...
Click to collapse
I used Android Studio to get the logs. Please find them below. To be honest, I didn't undestand anything from them
Code:
2022-03-15 19:04:20.037 6529-6529/? E/[IndicatorGarden]Presenter: onGardenApplyWindowInsets() New DisplayCutout is NULL!!
2022-03-15 19:04:20.041 6203-7029/? E/WindowManager: win=Window{d677566 u0 com.microsoft.windowsintune.companyportal/com.microsoft.omadm.client.OMADMAwaitActivity} destroySurfaces: appStopped=true win.mWindowRemovalAllowed=false win.mRemoveOnExit=false win.mViewVisibility=8 caller=com.android.server.wm.AppWindowToken.destroySurfaces:1249 com.android.server.wm.AppWindowToken.destroySurfaces:1230 com.android.server.wm.AppWindowToken.notifyAppStopped:1285 com.android.server.wm.ActivityRecord.activityStoppedLocked:2776 com.android.server.wm.ActivityTaskManagerService.activityStopped:2512 android.app.IActivityTaskManager$Stub.onTransact:2280 android.os.Binder.execTransactInternal:1056
2022-03-15 19:04:20.061 6529-6529/? E/[IndicatorGarden]Presenter: onGardenApplyWindowInsets() New DisplayCutout is NULL!!
2022-03-15 19:04:20.064 6529-6529/? E/SystemUIImageView: set Image Drawable!!
2022-03-15 19:04:20.064 6529-6529/? E/SystemUIImageView: set Background Drawable!!
2022-03-15 19:04:20.070 6529-6529/? E/[IndicatorGarden]Presenter: onGardenApplyWindowInsets() New DisplayCutout is NULL!!
2022-03-15 19:04:20.495 6814-6814/? E/ApduServiceInfo: Not adding <aid-group> with empty or invalid AIDs
2022-03-15 19:04:20.607 526-1088/? E/BufferQueueProducer: [com.android.systemui.infinity.InfinityWallpaperBlue$_6721#0] disconnect: not connected (req=1)
2022-03-15 19:04:20.609 526-2814/? E/BufferQueueProducer: [com.microsoft.windowsintune.companyportal/com.microsoft.windowsintune.companyportal.views.EnrollmentActivity$_20093#0] disconnect: not connected (req=1)
2022-03-15 19:04:20.681 32192-32192/? E/Zygote: isWhitelistProcess - Process is Whitelisted
2022-03-15 19:04:20.681 32192-32192/? E/Zygote: accessInfo : 1
2022-03-15 19:04:20.683 6203-8084/? E/WindowManager: win=Window{7796f62 u0 com.microsoft.windowsintune.companyportal/com.microsoft.windowsintune.companyportal.views.EnrollmentActivity} destroySurfaces: appStopped=true win.mWindowRemovalAllowed=false win.mRemoveOnExit=false win.mViewVisibility=8 caller=com.android.server.wm.AppWindowToken.destroySurfaces:1249 com.android.server.wm.AppWindowToken.destroySurfaces:1230 com.android.server.wm.AppWindowToken.notifyAppStopped:1285 com.android.server.wm.ActivityRecord.activityStoppedLocked:2776 com.android.server.wm.ActivityTaskManagerService.activityStopped:2512 android.app.IActivityTaskManager$Stub.onTransact:2280 android.os.Binder.execTransactInternal:1056
2022-03-15 19:04:20.713 32192-32192/? E/nder:appservic: Not starting debugger since process cannot load the jdwp agent.
2022-03-15 19:04:22.298 7354-8693/? E/BtGatt.ContextMap: remove() - removed: 7
2022-03-15 19:04:22.341 7354-7521/? E/BtGatt.GattService: [GSIM LOG]: gsimLogHandler, msg: MESSAGE_SCAN_STOP, appName: android.uid.system, scannerId: 7, reportDelayMillis=0
2022-03-15 19:04:22.433 7354-7521/? E/BtGatt.GattService: [GSIM LOG]: gsimLogHandler, msg: MESSAGE_SCAN_START, appName: android.uid.system, scannerId: 7, reportDelayMillis=0
2022-03-15 19:04:22.582 2892-2913/? E/perfsdkserver: [Interface] BpPerfSDKService::connectionRequest()
2022-03-15 19:04:27.585 2892-2913/? E/perfsdkserver: [Interface] BpPerfSDKService::connectionRequest()
2022-03-15 19:04:28.568 6203-6233/? E/Watchdog: [email protected]: 772 heap: 95 / 96 [2022-03-15 19:04:28.567] sdogWay: softdog
2022-03-15 19:04:32.591 2892-2913/? E/perfsdkserver: [Interface] BpPerfSDKService::connectionRequest()
2022-03-15 19:04:37.597 2892-2913/? E/perfsdkserver: [Interface] BpPerfSDKService::connectionRequest()
2022-03-15 19:04:42.603 2892-2913/? E/perfsdkserver: [Interface] BpPerfSDKService::connectionRequest()
2022-03-15 19:04:47.585 32243-32243/? E/Zygote: isWhitelistProcess - Process is Whitelisted
2022-03-15 19:04:47.586 32243-32243/? E/Zygote: accessInfo : 1

Hi,
I followed the guide, but the second time I fire up YASNAC it still fails the SafteyNet fix. I tried everything, rebooted every time, no dice.

GoodSoul said:
My Intune is updated to 5.0.5421.0 and Teams is still working on all my devices (Oneplus 7, Samsung Tablet A6, Samsung Galaxy S8+ - all with LineageOS 18.1).
For those who have problems: What does 'adb logcat' says in the moment when you launch teams?
Click to expand...
Click to collapse
Any luck for you to check my logcat?