Database Info

Nillkin Fresh: Review

Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:

Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.

jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star

N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...

N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....

I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.

It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star

Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta

Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.

jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta

The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star

I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.

Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?

Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star

[Q] White Nexus 5: how it looks after some time

Hi everyone!
I've been thinking of getting a white Nexus 5 (i really like the black-white contrast, and even the white touch for the ear piece). On thing I dread, though, is discoloration on the white back side or turning yellow or getting dirty or ... etc, etc...
I know there have been some rumors that the white back of the N5 is prone to discoloration, prominent marks from wear-and-tear, yellow-ish spots and so on..
Since the N5 has been launched for some time now, can anyone with a white model share his/hers experience? Did you suffer from discoloration or marks on the white backside over time?
Note: I did search the forum for such a topic and I know there is one that discusses the differences between black and white versions. I just wanted a new thread that is focused on the way the white N5 survives the test of time and wear-and-tear.

Mine is just as pretty and white as when I received it on Nov 5. No staining or anything like that at all.

Just as white since launch. I put it in a case for obvious reasons and it's flawless. I rather pay for a new case than a new phone.
Sent from my Nexus 5 using Tapatalk

I can confirm that. looks like day one

I'll go ahead and back up what these fine people have said. There's no discoloration at all.

What about scuffs from wear and tear? How easy does is gather scratches (from laying down on a table etc)?
What about the black shiny sides? Do they gather scratches and dings?
Thanks all for your answers so far!

It all depends on how a user treats the device bro, some are more cautious then others.

My white one started to get some discolouration, especially around the corners (I used it without a case, but kept a pant pocket exclusively for it). Beware of blue jeans that fade, it does rub off onto the phone.

I've heard of people complaining about scratches around the black edge but mine doesn't have a single mark on it anywhere and I've never had it in a case (bought late December)
I throw it in my jeans pocket or suit jacket, never had a case on it.

daisun said:
My white one started to get some discolouration, especially around the corners (I used it without a case, but kept a pant pocket exclusively for it). Beware of blue jeans that fade, it does rub off onto the phone.
Click to expand...
Click to collapse
Thanks for your input, @daisun! I'm sorry to hear that! Could it be possible to post one or two photos with the discolored or affected areas of the phone?
The jeans thing sucks. I had a white One X and, fortunately, I didn't have any such problems with it ...

The pair of jeans I was wearing were brand new and hadn't been washed ever, so it was at its peak 'phone staining' state. The discolouration is very very slight and you probably couldn't tell in real life due to shadows and lighting. It also doesn't show in photos because the whitebalance of the camera will simple disguise it.
I've since sold the white phone in case it discoloured anymore and bought a black one.

Put a case on it. Mine looks like the day I received it.
And for the record. Scratches on the side of a white vs black is shananagins
Sent from The Deathstar

[SPAM] Poetic Affinity Case (lots of pics) <UPDATED>

I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine) from the link below. Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
<MODERATOR EDITED - SPAM REFERRAL LINKS DELETED>
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for two reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.

rice923 said:
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Price: It's $10 on amazon. Not expensive, not cheap. Pretty normal pricing.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for three reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
3. I'm not a fan of the logo smack in the center of the back, especially when the original Nexus logo is obstructed. Considering there are three total logos/labels on the case, this one should've been omitted.
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
Click to expand...
Click to collapse
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.

Elnrik said:
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Click to expand...
Click to collapse
After I get my "x only" Dbrand skins, it should look more acceptable. I'm probably still gonna end up making a true bumper out of this down the road[emoji1]
Sent from my Nexus 6P using Tapatalk

UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine). Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case

I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
I've been using this case for the past few days. I received the "updated" version that has the P above the fingerprint reader.
I enjoy the overall feel of the case. I like the ridges on the sides, it really allows you to get some grip on the phone, I feel less likely to drop it.
The buttons feel nice and click nicely, but because of the ridges I have a harder time finding them (and determining power from volume keys) when I'm not looking at the phone. I'm sure this will get easier over time.
I like the clear plastic on the back, I'm running mine stock without any skins, but it's still nice to see the faint nexus logo from the graphite version. As you mentioned that it felt like a snug fit, mine actually feels a little loose in some places, like the top and bottom.
The opening for the finger print reader is larger than the scanner, and I actually prefer this to one the same size as the reader. I feel like it's easier to find and unlock, and recognizes a little easier
Sent from my Nexus 6P using Tapatalk

heleos said:
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Absolutely fine by me! It's a review thread and you have some thoughts about the same product. All good
Sent from my Nexus 6P using Tapatalk

I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk

diomark said:
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Something sounds fishy about that. Never had that problem even once. Also, it takes a fair amount of effort and coincidence to butt dial on a 6p. Gotta press the power button, followed with a way to unlock the device, then precisely press the dialer icon, and choose someone to call. You may want to look into it a bit deeper. I've never butt dialed a single person since owning any smartphone in any configuration in the past 5 years.
Sent from my Nexus 6P using Tapatalk

I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk

diomark said:
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I see. Sounds like all the planets aligned. If you decide you still want to use the case, I would recommend actually shaving down the inside of the button (the side that physically touches the power button of the phone). That should cut back on the sensitivity, but it's effort that I don't know if you'd like to invest.

Design of the Poetic Affinity has changed
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.

Bhalraam32 said:
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Click to expand...
Click to collapse
Yep its nice. I still need to return my old ones.

good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.

Lord. Tech said:
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Click to expand...
Click to collapse
It actually has good protection for as thin as it is due to the way its built. Very sturdy case.

RhinoShield 9H Tempered Glass Screen Protector

I haven't seen much on this screen protector and had to add my experiences. In my opinion this is finally the "perfect" screen protector for the note 9. Its a little expensive but totally worth it. I have two Note 9's and I have installed one on each phone. I ended up getting one that had a small imperfection causing the one side to lift overnight but after a few emails and pics to RhinoShield they send me a new one for free. They did have two different ones listed on their website but right now I only see the one thats full adhesive. The install is a little different than most but not hard and the alignment tray they supply works great. I would watch the install video so you can get a perfect install. The only cons I noticed is some dust can collect on the sides but not as bad as the dome glass. It also has black borders and the sides seem to get cut off a tiny bit. This isn't a deal beaker because the edge panel still works perfect. This is not an edge to edge but I prefer that also so it works with any case. I have tested it with the RhinoShield SolidSuit and Crashguard as well as two Spigen cases and it fits perfect. The SPen feels great and touch sensitivity is also very good (I did turn on the increased touch option). After trying a TON of screen protectors this in the end all for me. I was very surprised to not see any real reviews on this one.

This looks nice.
Is it full adhesive and does it go on easy or are there a lot of bubbles that are hard to get out?
Just had a complete nightmare with the ZAGG Elite and don't want to go through that again.
Can you get it on Amazon or only from Rhinoshield?

It is full adhesive. That is what makes it so good. No rubber feeling from a wet install no messy LOCA glue and no stupid edge glue that pops off if you look at it wrong. This was my install method I was able to do two like this with ZERO bubbles. Im kinda OCD with screen protectors.
1. Clean (DUH)
2. Place alignment tray on, clean again and use dust stickers that are included.
3. Peel off protector back film and place the screen protector on the phone but dont press it down.
4. Once its aligned in the tray perfect I used my knuckle and ran it down the center of the phone.
5. Slowly run your finger/knuckle from the center towards the edge but going up and down the phone evenly. These stick with more of a "tacky" glue unlike the "static cling" from most full adhesive glass protectors. If you get a bubble make sure to work it out as you go even lifting it up to make sure they are out. Once its stuck down I dont see them every working out. You will see what I mean when you do it.
6. When you get to the curved edge it will stop sticking and leave almost when looks like a bubble from the top to the bottom along the edge. I just started at the center of the edge and pressed the screen down SLOWLY all the way to the top and then the same from the center to the bottom. Do that on both sides and sit back and enjoy your work.
Im convinced there is not a better protector out there including Dome Glass. I even bought an extra for backup if anything happens to them.

dainteg said:
It is full adhesive. That is what makes it so good. No rubber feeling from a wet install no messy LOCA glue and no stupid edge glue that pops off if you look at it wrong. This was my install method I was able to do two like this with ZERO bubbles. Im kinda OCD with screen protectors.
1. Clean (DUH)
2. Place alignment tray on, clean again and use dust stickers that are included.
3. Peel off protector back film and place the screen protector on the phone but dont press it down.
4. Once its aligned in the tray perfect I used my knuckle and ran it down the center of the phone.
5. Slowly run your finger/knuckle from the center towards the edge but going up and down the phone evenly. These stick with more of a "tacky" glue unlike the "static cling" from most full adhesive glass protectors. If you get a bubble make sure to work it out as you go even lifting it up to make sure they are out. Once its stuck down I dont see them every working out. You will see what I mean when you do it.
6. When you get to the curved edge it will stop sticking and leave almost when looks like a bubble from the top to the bottom along the edge. I just started at the center of the edge and pressed the screen down SLOWLY all the way to the top and then the same from the center to the bottom. Do that on both sides and sit back and enjoy your work.
Im convinced there is not a better protector out there including Dome Glass. I even bought an extra for backup if anything happens to them.
Click to expand...
Click to collapse
And I looked on Amazon but dont see it. They have the one that's just the edge glue. But don't bother with that one.

Going to order on and test it out with some optical adheasive. So the glue they use is it like the gel that Zagg uses on the elite? I like the full cover of this one.

Never tried the zagg one. I thought I read reviews on that one and they wernt that good. You really won't need to add anything to this one. Just don't leave any bubbles as you Install it thinking you will get them out after it's all the way on.

I'm going to order one also. Sounds kind of like the Elite but I'm praying it's not.

Nah Zagg elite's work great. Just idiots don't know how to install them. My beef is Zagg makes a great product...then goes out of there way to gimp it. The black bezzles are absolutely horrible. Cuts down on your screen size and even installed perfect you get a little light leakage.

Ya I hear you on that. This one has the black borders that suck but as long as I can still use the edge panel and I dont see bubbles I'll take it any day.

bignazpwns said:
Nah Zagg elite's work great. Just idiots don't know how to install them. My beef is Zagg makes a great product...then goes out of there way to gimp it. The black bezzles are absolutely horrible. Cuts down on your screen size and even installed perfect you get a little light leakage.
Click to expand...
Click to collapse
I've installed many of full adhesive protectors over the years and I'm no idiot. Never have I seen a glass protector that cracks as easy as the ZAGG Elite.
I will try the Rhinoshield and see if it's any better than the Elite. I like that the sensors are covered with the Rhinoshield. Just ordered one up.
Is the alignment tool a plastic border that goes around the phone like Zagg uses?
---------- Post added at 10:24 PM ---------- Previous post was at 09:48 PM ----------
Just ordered 2 so I'll have a spare in case I screw up the first one.

Ya it's just a plastic frame that you put on from the top and it has little tabs to center it. It's simple but works good.
I'm pretty easy on my phones and don't ever really drop them but the glass on this one seems pretty good. We will see how it holds up on the woman's phone she is a little rougher with hers. I'm glad you ordered one so I can see what someone else thinks about it.

dainteg said:
Ya it's just a plastic frame that you put on from the top and it has little tabs to center it. It's simple but works good.
I'm pretty easy on my phones and don't ever really drop them but the glass on this one seems pretty good. We will see how it holds up on the woman's phone she is a little rougher with hers. I'm glad you ordered one so I can see what someone else thinks about it.
Click to expand...
Click to collapse
I would be interested in this also... If these idiots would stop making these worthless curved screens it would be all good. Just got my wife a Moto Z3 and it's a nice phone thinking of getting one also to have a flat screen again.

kendive said:
I would be interested in this also... If these idiots would stop making these worthless curved screens it would be all good. Just got my wife a Moto Z3 and it's a nice phone thinking of getting one also to have a flat screen again.
Click to expand...
Click to collapse
I agree and absolutely hate these curved screens. The one thing I liked about the iPhone XS Max was the nice flat screen, full adhesive protectors went on like a dream.

AGREED. But who wants a damn iphone lol

dainteg said:
AGREED. But who wants a damn iphone lol
Click to expand...
Click to collapse
My wife, my daughter and all their friends.

Ya half my friends too. I wont let my kids use them unless they want to buy the with their own money.

Oh come on!
I bought the RhinoShield tempered glass protector a few month ago and came with no frame to put it on the phone, and was only border adhesive with only top and bottom black borders.
But on the side on randomly on the center of the screen, the same ugly rainbow effects we usually got (and dot matrix too).
The bottom left corner had issues since it wasn't responsive anymore either (probably due to the inability to put it correctly because no frame to help even if all seem to be symmetric).
Not satisfied.

Nastrahl said:
Oh come on!
I bought the RhinoShield tempered glass protector a few month ago and came with no frame to put it on the phone, and was only border adhesive with only top and bottom black borders.
But on the side on randomly on the center of the screen, the same ugly rainbow effects we usually got (and dot matrix too).
The bottom left corner had issues since it wasn't responsive anymore either (probably due to the inability to put it correctly because no frame to help even if all seem to be symmetric).
Not satisfied.
Click to expand...
Click to collapse
I believe Rhinoshield had both an edge sticker like you received and the full adhesive version. I ordered the full adhesive ones.

felloffthetruck said:
I believe Rhinoshield had both an edge sticker like you received and the full adhesive version. I ordered the full adhesive ones.
Click to expand...
Click to collapse
I just see they provide now two versions. On their install video, they provide an installation frame for it too.
I won't try the experience I think, especially when it said that it's not edge to edge
---------- Post added at 02:41 PM ---------- Previous post was at 02:39 PM ----------
meesagandu said:
You can try GadgetShieldz their screen doesn’t have any Rainbow or halo effect(If applied correctly) and they make the minor scratches disappears.
Click to expand...
Click to collapse
I'm not fan of plastic protector. Not smooth enough for use with swiping, plus it really attract dust.

Ya they did have two versions. I never bothered with the edge only glue because they all seem to suck. I'm telling you the full adhesive one is by far the best one I have tried so far. It's not perfect but its as good as we will get because of the curved edges.

Are you tired of the round edges?

Hi all.
Sorry my first post on reddit so hoping it is correct
Im thinking about buying the Oneplus 7T pro Mclarn. But I have read some posts about the round edges on the screen.
Are you tired of it?
Thanks!
Regards Daniel

Nope

No. They don't bother me even after ~3 months of use. Wouldn't mind them even when the time comes for a replacement. But I'd prefer a flat normal display if it was offered.

No.

No.

I was very annoyed by the rounded edges on the Samsung Galaxy S7 Edge but I barely notice the edges on the OnePlus 7 Pro.
I thought they were going to annoy me initially but to be honest, I don't even notice them anymore.

Nope

Haven't even noticed after a few months...

I consider myself round edges hater. It's just stupit. I wish the screen was normal.
That being said, the display is just too good... I'm unable to get annoyed by the round edges when everything else is just so good.
My main problem with the edges is the issues finding a working screen protector. Whitestone dome was tend to break on Pixel 2 XL even if i treated the phone very carefully.
I was sure OP7's rounded edges will cause problems, but luckily enough, Whitestone dome glass on this phone holds fantastic. No flaws whatsoever!

YES ! It's horrible! And the phone has round corners too ! That it's ugly too.

Yes and I find it pointless. Just as pointless as curved screens.

null0seven said:
YES ! It's horrible! And the phone has round corners too ! That it's ugly too.
Click to expand...
Click to collapse
Yeah I'd be happy to see this trend go away and return to 16:9 display where all content scales correctly.

I'm Happy with edge to edge screen. NO to curved screen. Also a smaller phone/screen. Trend it's going to 7" screen. That's to much! Phone do not fit in any pocket.
A LED, like a thin line, on one side or both sides to signal notification, ..
Maybe to implement the new model of battery which it will be smaller and light weight.

I hate the rounded corner and edges. I'm going to get the 7T when they get TWRP working for it.

I love it, it gives a much smoother feeling. I reached the point , that I'm even looking for rounded corners in the apps, but unfortunately there's no always choice. Firefox, dialer, contacts.., etc look so "not matching" with the phone, with the sharp corners. I wish I could be able to make my own apps and rom too
I also thought at the first time, that it's not nice, like an old tv, that had this rounded corners and I was afraid that it gives that oldschool feeling, but I was wrong, saying after few months.

Didn't take long before I ordered a rear case. Found it uncomfortable without.

I think it makes large phones feel smaller and elegant
So no, I like it

I'm good with it, good thing as I'll hang on to it for a while

Personally not a fan of the rounded edges, but I'm fine with it relative to damned notches. I refuse to buy any phone with a notch and am glad to see that trend generally leaving.
Sad to see hole punches sticking around and made the choice to get the 7T Pro much easier (than waiting for the hole smacked 8).

Yes, I'm not a fan at all, it interferes with the way I like to hold the phone. I got used to them and now only sporadically I have issues with accidental touches etc., but I would prefer them to go away.
Definitely no longer a dealbreaker, because I love the phone otherwise, but annoyance nonetheless.