Related
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Use the latest version of Odin
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try diffrent USB ports on the computer and diffrent signal cords
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
Did you enable usb debugging? Oh my bad, scratch that, try connecting your phone to your pc b4 you open Odin (using the latest Odin and run as admin)
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
hi! i have the same problem , did you find a solution please? thanks
That secure download enable thing is normal mine has the same thing. Your phone is not connecting for whatever other reason
Try flashing exact stock firmware with odin.
SMG920I
POWERED BY INSUFFICIENT RAM
TUNED BY TEAM PINGPONG
DRIVEN BY KFORKAI
darksimo said:
hi! i have the same problem , did you find a solution please? thanks
Click to expand...
Click to collapse
Yeah i got it flashed. Turned out that i used an old odin also you have to get a firmware which has the same csc or one that it compatible with your device. Info on samsung csc can be found on the net, look for multi csc codes if you wanna change to software from another carrier.
Sent from my VS980 4G using XDA Free mobile app
Before you start flashing always disable reactivation lock. Othervise flashing may fail.
ODIN won't detect Galaxy S5 G906K [KT]
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Resolved.
nano-dev said:
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Click to expand...
Click to collapse
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
kingroot not working!
nano-dev said:
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
Click to expand...
Click to collapse
.................................................................................................................................................................................................
kingroot was working when they released V.4.5.0 but now not working anymore :crying:
sorry for my bad English
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try using box tools like z3x to see if problem would be solved
Update: i fix it by unmouting checking and mounting back the phone...weird a part or idk had to be not well attached.
Hello
I was trying to root Samsung galaxy grand prime G530H. But it has stucked in 'downloading...'
Secure Download : Enable in blue
Why can't I unlock the bootloader on FZ? There is just no such option in Dev Mode.
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Feyaad said:
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Click to expand...
Click to collapse
You could always try the S7 edge specific forums.
Not being sarcastic
root the chines root
i have sm-n9006 i cant root my phone
also have the secure download enadled in blue
any help ??
my phone is a chinses version ... which doesnt have the play store
Hello
Do you have your bootloader blocked, the new version of firmware enabled this option, you need to go to development options and enable the option of OEM, and that's it, you can flash whatever you want
Hi i just hard bricked my samsung galaxy core i8262. trying to flash custom kernel make it hard bricked. now i can't turn it on, can't boot to recovery and into the downloading mode. when i try to turn it on or do the combo buttons (keys) to recovery or download mode it only vibrates. BUT when i try connecting my hard bricked samsung to computer it is recognized by computer AND When I install odin and see if the odin detects it well YES it detects my phone. and now I just want to know if i can still flashed my stock firmware to my bricked phone with the odin even if my phone is not in downloading mode? or does usb jig can work it on to downloading mode? ( i dont have usb jig so i dont know yet if it will work on my phone) i didn't yet try flashing my stock firmware using the odin cause im afraid that it will get super hard bricked. Help.
Little Einstein said:
Hi i just hard bricked my samsung galaxy core i8262. trying to flash custom kernel make it hard bricked. now i can't turn it on, can't boot to recovery and into the downloading mode. when i try to turn it on or do the combo buttons (keys) to recovery or download mode it only vibrates. BUT when i try connecting my hard bricked samsung to computer it is recognized by computer AND When I install odin and see if the odin detects it well YES it detects my phone. and now I just want to know if i can still flashed my stock firmware to my bricked phone with the odin even if my phone is not in downloading mode? or does usb jig can work it on to downloading mode? ( i dont have usb jig so i dont know yet if it will work on my phone) i didn't yet try flashing my stock firmware using the odin cause im afraid that it will get super hard bricked. Help.
Click to expand...
Click to collapse
Ok so I had a similar problem with my samsung phone as well where i couldnt go into download mode. So i pretty used the download mode combo(it wasnt in download mode). I just flashed stock firmwere and apparently it worked and you said odin was recognizing it so the best bet is to flash stock firmware via odin even if its not going to download mode
Hope i helped you
Little Einstein said:
Hi i just hard bricked my samsung galaxy core i8262. trying to flash custom kernel make it hard bricked. now i can't turn it on, can't boot to recovery and into the downloading mode. when i try to turn it on or do the combo buttons (keys) to recovery or download mode it only vibrates. BUT when i try connecting my hard bricked samsung to computer it is recognized by computer AND When I install odin and see if the odin detects it well YES it detects my phone. and now I just want to know if i can still flashed my stock firmware to my bricked phone with the odin even if my phone is not in downloading mode? or does usb jig can work it on to downloading mode? ( i dont have usb jig so i dont know yet if it will work on my phone) i didn't yet try flashing my stock firmware using the odin cause im afraid that it will get super hard bricked. Help.
Click to expand...
Click to collapse
Did your Rom countain" CSC" if Not, Try to find one with CSC File
Good Luck
falconscrest123 said:
Ok so I had a similar problem with my samsung phone as well where i couldnt go into download mode. So i pretty used the download mode combo(it wasnt in download mode). I just flashed stock firmwere and apparently it worked and you said odin was recognizing it so the best bet is to flash stock firmware via odin even if its not going to download mode
Hope i helped you
Click to expand...
Click to collapse
I just tried it but sadly didn't work. odin still detects my phone but when i starting flasing the firmware (clicking start button) it doesn't running. btw thanks.
delliverance said:
Did your Rom countain" CSC" if Not, Try to find one with CSC File
Good Luck
Click to expand...
Click to collapse
what is csc file? i googled it but i didn't really know what it does. is it debrick image? cause im seaching here on xda and see some post that using debrick image to boot phone using sd card. please need help. tnx
Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.
IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)
crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?
crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back
thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.
G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%
My phone is a Samsung Galaxy S7 SM-G930A. I recently rooted my phone and it was causing alot of problems such as slowdown and bugs. So, I tried to put stock firmware on it and I was unsuccessful. Now my phone is stuck in a boot loop. I need to know how to properly install stock firmware into my phone because I have followed guides on XDA'S website and Odin keeps failing. I really need help with this because I don't even have a working cell phone.
DarkSlayer356 said:
My phone is a Samsung Galaxy S7 SM-G930A. I recently rooted my phone and it was causing alot of problems such as slowdown and bugs. So, I tried to put stock firmware on it and I was unsuccessful. Now my phone is stuck in a boot loop. I need to know how to properly install stock firmware into my phone because I have followed guides on XDA'S website and Odin keeps failing. I really need help with this because I don't even have a working cell phone.
Click to expand...
Click to collapse
Download samsung kies 3 and put the phone in download mode and try to recover the phone by flashing the default firmware that came with the phone.
Kies 3 does not support my device (SM-G930A)
RiTCHiE007 said:
Download samsung kies 3 and put the phone in download mode and try to recover the phone by flashing the default firmware that came with the phone.
Click to expand...
Click to collapse
Thank you for the response but when I connected my phone to Kies 3, I got a message that said "we do not support this device". I have also tried Samsung Smart Switch and that did not work either. Is there another method for restoring my phone and getting it out of the bootloop?
DarkSlayer356 said:
Thank you for the response but when I connected my phone to Kies 3, I got a message that said "we do not support this device". I have also tried Samsung Smart Switch and that did not work either. Is there another method for restoring my phone and getting it out of the bootloop?
Click to expand...
Click to collapse
Yes i know you get that msg in kies but you still will be able to flash the orig fw back to the device with kies. Just put the phone in download mode before hooking up the phone to the pc then start kies
And go to the top bar and select the 4th tab where you will see recovery. Then it will ask you for the model number and some other things and after that it will flash the fw for you. I have done this a couple of times now so i can tell you 100% that it will work
RiTCHiE007 said:
Yes i know you get that msg in kies but you still will be able to flash the orig fw back to the device with kies. Just put the phone in download mode before hooking up the phone to the pc then start kies
And go to the top bar and select the 4th tab where you will see recovery. Then it will ask you for the model number and some other things and after that it will flash the fw for you. I have done this a couple of times now so i can tell you 100% that it will work
Click to expand...
Click to collapse
I'm actually trying to do exactly this now, and have tried re-entering the correct model number and serial number into Kies numerous times.
No matter what, Kies continues to state "Please check the model name and enter it" even though all of the info entered is correct.
Any suggestions? I'm doing this with my G930A on Nougat (model "SM-G930A")
I have a bricked S8+ stuck on samsumg logo (labeled as SM-G9550 on backside label), but when i boot into download mode, it shows "PRODUCT NAME: SM-G955N", How this could possible, when i check the imei on the web, it result SM-G9550 as product name
flashing "N" firmware with odin result PASS, but still stuck on logo..
i can't flash 9550 firmware as it shows error "Secure Check Fail: PIT"
FYI, when i go to recovery mode, the screen goes to "Kernel Panic Upload Mode"
please help if anyone here has information about it
ryantprawira said:
I have a bricked S8+ stuck on samsumg logo (labeled as SM-G9550 on backside label), but when i boot into download mode, it shows "PRODUCT NAME: SM-G955N", How this could possible, when i check the imei on the web, it result SM-G9550 as product name
flashing "N" firmware with odin result PASS, but still stuck on logo..
i can't flash 9550 firmware as it shows error "Secure Check Fail: PIT"
FYI, when i go to recovery mode, the screen goes to "Kernel Panic Upload Mode"
please help if anyone here has information about it
Click to expand...
Click to collapse
Try doing the carrier switch method first then downloading and installing the unlocked firmware afterwards via odin. Make sure you download the 955U1 Odin firmware and NOT the 950U. Also can you upload a screenshot of what it shows in download mode
creglenn said:
Try doing the carrier switch method first then downloading and installing the unlocked firmware afterwards via odin. Make sure you download the 955U1 Odin firmware and NOT the 950U. Also can you upload a screenshot of what it shows in download mode
Click to expand...
Click to collapse
Thanks for your reply, so far the device only accept 955N firmware only, but nothing happen after falshing , why you suggest to download 955U1? will it work?
do you mind to give me a link how to do the carrier switch? I will search it on inet while u replying this post
ht**s://ibb.co/jitLV7
ht**s://ibb.co/jWjiiS
ryantprawira said:
Thanks for your reply, so far the device only accept 955N firmware only, but nothing happen after falshing , why you suggest to download 955U1? will it work?
do you mind to give me a link how to do the carrier switch? I will search it on inet while u replying this post
ht**s://ibb.co/jitLV7
ht**s://ibb.co/jWjiiS
Click to expand...
Click to collapse
You have the Korean model not sure why it has a 950 on the back. But you need to use the 955F firmware. Flash that thru odin
creglenn said:
You have the Korean model not sure why it has a 950 on the back. But you need to use the 955F firmware. Flash that thru odin
Click to expand...
Click to collapse
i tried, but blocked becouse of pit.. errors occur "SECURE CHECK FAIL: (PIT)"
ryantprawira said:
i tried, but blocked becouse of pit.. errors occur "SECURE CHECK FAIL: (PIT)"
Click to expand...
Click to collapse
Are you using the new Odin 3.13.1, if you are or not try removing the Samsung USB drivers and then restarting the computer. Then re-download the USB drivers and firmware.
ryantprawira said:
i tried, but blocked becouse of pit.. errors occur "SECURE CHECK FAIL: (PIT)"
Click to expand...
Click to collapse
I had the same issues flashing my 8+ . . . pit issues.
I found that a different USB cable worked, and also:
Go to download mode, start odin, load TWRP or other file, press start and then press pwn dwn, bixby and power, Odin will fail, but........
because you you went back into download mode, Odin will succeed next time you flash.
For some reason if I just acknowledged that Odin was going to fail on the first attempt, I kept the phone connected and did the routine, and on the second flash attempt, no more Pit file errors for me.
creglenn said:
Are you using the new Odin 3.13.1, if you are or not try removing the Samsung USB drivers and then restarting the computer. Then re-download the USB drivers and firmware.
Click to expand...
Click to collapse
I'm using odin 3.12, sounds promising, i will give it a try, thanks for the tips..
JeffDC said:
I had the same issues flashing my 8+ . . . pit issues.
I found that a different USB cable worked, and also:
Go to download mode, start odin, load TWRP or other file, press start and then press pwn dwn, bixby and power, Odin will fail, but........
because you you went back into download mode, Odin will succeed next time you flash.
For some reason if I just acknowledged that Odin was going to fail on the first attempt, I kept the phone connected and did the routine, and on the second flash attempt, no more Pit file errors for me.
Click to expand...
Click to collapse
i have try this combination but still failed, i guess the flash are blocked because FRP lock is "ON", since i can't go into the system or recovery mode, i have no idea how to turn off the FRP lock...
if you guys have a tricks how to turn off the frp lock via download mode, i think the flash should work without any doubt..