Database Info

{REVIEW} SGP Spigen Ultra Oleophobic Screen Protector

Hi all just thought i would give a small review on the SGP Spigen Ultra Oleophobic screen protector, to help any one out there make a decision if this would be good or not for them.
Contents
2 screen protectors
1 squegee
1 cloth
So ill go through the main points:
*Price : I paid $19.95 on eBay ( Australian prices ) this for me was not a large price to pay as ive used their products before and i know the quality that comes with them and what you get for your money. (two screen protectors )
*Ease of install : I found it super easy to install ive done it many time before... but if you guys need help this link will help.
*Once its on how does it fit? : fits great with 2 mm clearance around the front ear speaker and camera also it does not go down the sides... i liked the fact that it did not go down the curved sides because on my gs3 the screen protector would lift on the edge and then dirt would get underneath and make it look really bad.
*How does it feel? : the nexus 4 screen is the smoothest screen I have ever touched so naturally when I put the screen protector on that smoothness decreased not by much but I do feel a small grab every now and then when I my hands perspire or get clammy. Ive also noticed a small grab from the edge of the screen protector when swiping from the side ( but this was to be expexted ).
Other then that feel great.
*How does it look ? : clear , no rainbow , no blue tint , and no deformed spots or dust particles stuck in the screen protector as some cheaper once I had found have.
This is also not a matt screen protector so when in the sun it does mirror a little, but not to much more then what it was without the screen protector.
Another note is you do notice the sides of the screen protector because they dont go all the way to the sides but i would rather this then what i mentioned before.
so now for pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You miss the main point..
how is the oil resisting ability of it?

I have not had any issues with it collecting oil or greese on the screen protector. Sorry sort of missed that part. None issue so I forgot to mention it.
Sent from my Nexus 4 using xda premium

I bought one of these and it was the hardest time I've ever had installing a screen protector. It is just barely wider than the screen so there is no room for error, and once I got it to match up with the screen, it was a little over the edge so it was lifting. I ended up just getting frustrated with it and going naked.
Sent from my Nexus 4 using Tapatalk 2

cases blocking 90% of the rear speaker's volume??

so i've had a couple of cases lately, one hard snap on by rearth ringke slim and the other diztronic tpu. when i have the case on, screen facing up on a flat table/surface, the sound/volume is almost completely gone, meaning the case has blocked the speaker?! without any cases, the volume is ok because of the little raised lip from the speaker cutout. so i'm wondering, is it only my phone that is a little bit flawed from design or what? does anybody else have similar experiences? i've previously had the s2 and s3 (all US t-mobile version), and none had this problem.

I have the same issue with the Cruzerlite cases I have. I have to put the phone screen down at night so I can hear my alarm in the morning.

here is what i did, I took a lighter to soften up the case, then i pushed the top of the hole up so what it does not seal when you put it on flat surface.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The spigen slim armor doesn't have that issue. Other cases I used did.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

wifey and I havent had any issues with our ballistic cases... the cutout is a little larger than the speaker itself is. attached pic is my i337 in the ballistic case.
sent from my black at&t sgs4

Have this issue with a cheap tpu case as well as the Neo Hybrid. Quite annoying and never had the issue with any other phone which has the speaker on the back
Sent from my GT-I9505 using Tapatalk 2

nismo35 said:
here is what i did, I took a lighter to soften up the case, then i pushed the top of the hole up so what it does not seal when you put it on flat surface.
Click to expand...
Click to collapse
i see what you did there, but not sure if i'd wanna go that route. thanks for the input though.

i ordered a different case, hope it doesn't have this issue, I got this case because it was cheep and wanted a case on it when the phone got here.

Is it me or does this seem like a major oversight on the part of case makers? The case I got suffers from the same issue. After some brainstorming I came up with a solution. If your case is black, this will work great. Just a small piece of electrical tape. It's just thick enough to keep from sealing the hole for the sound on a hard, flat surface.

Sideman7 said:
Is it me or does this seem like a major oversight on the part of case makers? The case I got suffers from the same issue. After some brainstorming I came up with a solution. If your case is black, this will work great. Just a small piece of electrical tape. It's just thick enough to keep from sealing the hole for the sound on a hard, flat surface.
Click to expand...
Click to collapse
I won't disagree with that temporary solution, but probably won't do cuz it makes the case look ugly and it'll be sure to come off from going inside and out of pockets. I'm just using anything in the house that I can find to lift the phone up, currently using some post-it sticky notes. I'm also waiting for the spigen Neo hybrid case to come, some has said it doesn't kill the speakers.
Sent from my SGH-M919 using Tapatalk 2

Review: 0.15mm Flexible Glass Screen Protector Only $5 (Cybertech)

So I was browsing Amazon and ebay for screen protectors and on both sites I came across this one for $5 and it sounded too good to be true. Well I went ahead and ordered it on ebay and I received it 5 days later.
http://www.ebay.com/itm/281313035202
Without further ado here are the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seeing as my S5 already had a screen protector on it I didn't actually test this one out on my phone but...
I went ahead and bent it and to my surprise one I had bent it enough there was a quick and loud crack noise which resulted in what looks to be cracked glass in the protector. I did it a total of three times, same result each time.
It comes with the stuff pictured and a plastic piece on each side of it that needs to be peeled off before using it.
The back felt like it would adhere well to the phone screen like other glass protectors.
To be honest I don't know that it feels 100% like the glass protector already on my phone but I'm not even sure what I mean by that.
What I can say is it is every bit as slippery and there is no doubt in my mind it is genuinely glass from how it cracks.
The detailed camera and sensor cutouts are worth noting.
I'll conclude the review by saying I'd definitely recommend it, especially for only $5, and if I didn't already have a protector on my phone I would happily use one myself.

glass protector has gone down in price alot recently, it's not really surprising that you can get them for usd 5, i can actually get them for usd 2-3 each, and cheaper if i buy them in bulk, it all depends on the quality and, thickness and cut.

This screen protector is tempered glass type it's different from spigen that's why it's so cheap. I bought this thinking it would have a premium glass feel but honestly it feels like any other plastic screen protector
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

all spigen glass protectors are tempered glass.

I just installed this, and it does feel like glass. I had my doubts that it was actual glass when I opened the package. However the product does feel like glass once on the phone, with the proper finger tip drag and smoothness. It is as reflective as the bare screen.
Installation was the same as the glass protector on my Nexus 7, once contact was made it pulled itself down with only a few bubbles to push out. It took 5 minutes maximum, including removing the old plastic film.
It fits perfectly, with cut outs at the proper spots. I didn't bother with pics since it is barely visible.
I'm happy enough, it was cheap and seems to be what I was looking for. I didn't need impact protection as much as scratch resistance.
Cybertech 0.15mm Flexible Glass S5 screen protector

Rearth Ringke Slim case

I got this case on amazon for $10.99. It comes with a mediocre screen protector.
The case itself is extremely light and fits around the phone securely. It covers every edge which is nice for these light shell cases. The design is similar to OEM look.
The feel is a little slick but better than the phone metal body. I wish it were more rubbery like other slim cases I've had before.
The case I got was gold.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have the clear one. Love it. It's the only super slim case case I could find that covers all sides and provides a small lip for face down lay on the table protection.
Edit: the black one has a soft touch feel BTW. I have that one on my M8.[emoji16]

sdotagain said:
I have the clear one. Love it. It's the only super slim case case I could find that covers all sides and provides a small lip for face down lay on the table protection.
Edit: the black one has a soft touch feel BTW. I have that one on my M8.[emoji16]
Click to expand...
Click to collapse
Thanks! That's good to know. I was debating on whether to get black or gold and just randomly chose gold.
I wish the screen protector it came with was larger. It doesn't cover the entire surface and it's a weird size in that it doesnt fit the actual screen part of the phone either.

minotauri said:
I wish the screen protector it came with was larger. It doesn't cover the entire surface and it's a weird size in that it doesnt fit the actual screen part of the phone either.
Click to expand...
Click to collapse
So true! I've placed many screen protectors on phones over the years and this one was by far the worst. It just didn't fit right at all I had to trash it. But it was free so I can't complain too much. I prefer glass ones now anyway.

URL for the case:
http://www.amazon.com/Ringke-Screen...429212145&sr=8-3&keywords=ringke+slim+case+m9

I had gotten the clear one, but I don't recommend it. The cutout for the camera flash is too close, and since the case is clear, the flash will reflect and cause a glare in your photos. The black and gold ones probably don't have this problem though.

Looks really sleek and I kinda like the gold one however it does look like the Huawei Mate 7. Have held this phone with this case and it sure was very light and slim. I agree that it would've been better if the feel is a little more rubbery because I am not that comfortable holding the phone with that case.

I bought this case last month when the phone first came out. I bought the clear one and it was very slim and looked very sharp. This past weekend while walking through a parking lot I went to pull my phone out of my pocket and literally threw it up in the air and it took about a 6 foot bounce off the pavement. The corner of the Ringke case is broken off but there isn't one scratch on my phone.
Now you expect a giant brick of a case like the otterbox to survive these types of falls but I don't expect an Ultra thin case to survive and I was very impressed it was able to protect my phone. Its a good case.

I would'nt had bought this case if I knew it was this slippery lol

I have one in clear and like the way it does not add bulk to the phone at all. You feel like you are holding just the phone and the clear case really shows off the two tone.

Aluminium bumper and case

Has anyone used these before? Product description says that it doesn't affect signal, but from memory apparently it does for other phones.
Just wanted to check other people's experiences on this type of case. Looking at these two at the moment.
Also would this fit nicely with a tempered glass screen protector?
Aluminium bumper with tempered glass back
Aluminium bumper with acrylic back
(note I had to remove links as I cannot post it yet, but you can find them on aliexpress quite easily.

http://www.aliexpress.com/item/Redm...hweb201527_3_71_72_73_74_75,searchweb201560_4
i received this replacement back case (all on aliexpress seem the same model) for a while but i'm not satisfied with it. The back with the "glass" feels quite nice but the "aluminium-frame" on the side is just 4 too thin aluminium-stripes glued on the plastic case. the stripes also easily bend when you are trying to remove the case.
i will stick with the original back case until there is some single aluminium frame/case to buy!

If you search "Aluminium Metal Bumper Frame phone Case for xiaomi redmi note2 Ultra Slim hard Hippocampus Buckle cover" it might be what you're looking for. Im not sure if its full metal alloy though.
Or luphie brand seems good, but more expensive. looking for reviews now.

any bumper and case cheap?

frogduck said:
If you search "Aluminium Metal Bumper Frame phone Case for xiaomi redmi note2 Ultra Slim hard Hippocampus Buckle cover" it might be what you're looking for. Im not sure if its full metal alloy though.
Or luphie brand seems good, but more expensive. looking for reviews now.
Click to expand...
Click to collapse
i ve already seen this item on aliX, but i prefer a whole replacement cover made out of aluminium! but thanks anyway!

it's nice.

i got one with a acrylic back,the alluminum is thick so it make me lose 1 signal bar,wifi have same problem but it works but it feels cheap in hand.

Emmes said:
http://www.aliexpress.com/item/Redm...hweb201527_3_71_72_73_74_75,searchweb201560_4
i received this replacement back case (all on aliexpress seem the same model) for a while but i'm not satisfied with it. The back with the "glass" feels quite nice but the "aluminium-frame" on the side is just 4 too thin aluminium-stripes glued on the plastic case. the stripes also easily bend when you are trying to remove the case.
i will stick with the original back case until there is some single aluminium frame/case to buy!
Click to expand...
Click to collapse
Can you take pictures of your redmi ? it's hard to imagine what it looks like ! thx !

This is the "Aluminium Metal Bumper Frame phone Case for xiaomi redmi note2 Ultra Slim hard Hippocampus Buckle cover" mounted on my RN2.
The fram is real and solid alluminium, perhaps too smooth.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}