Database Info

[Q] Brick forever or possibility to restore?

Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.

Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635

cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".

Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.

I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app

you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...

edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!

how did you try to enter the recovery mode? what key combination that you press...

Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck

edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.

jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.

I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886

ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.

Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.

ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.

Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.

Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..

Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!

1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....

Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:

[Q] Boot Loop HELP!!

my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!

alvin_vii said:
my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!
Click to expand...
Click to collapse
Try reflash original HC firmware. For me worked

yep, best bet is to reflash with original HC then format/wipe using default wiper in the recovery menu.
I also tried flashing an official ICS directly to a bootloop stricken device and it works too

Bootloop Problem
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..

ginoboyz said:
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..
Click to expand...
Click to collapse
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.

alvin_vii said:
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.
Click to expand...
Click to collapse
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?

ginoboyz said:
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?
Click to expand...
Click to collapse
did you try the XXLA3 ATO firmware? 3 files with ATO .pit files?

Don't easy try to flash with pit file,it's very danger and will destroy your emmc.try to flash it with the can over Odin in download mode
Sent from my GT-P6800 using xda app-developers app

Galaxy S6 bootloop

Hey experts so i have the S6 gm-920F i updated OTA and now the phone doesnt recognize the fingerprint and forgot the password so i install TWRP 3 via odin booted the recovery and transferred my data successfully then I made a factory reset to delete the passcode to be able to use the phone after making the reset and pressing reboot system it gets stuck in the recovery the system doesn't reboot so i tried hard rebooting the phone is stuck on black screen that says samsung galaxy s6 and restarts restarts restarts (bootloop) i tried reflash the 6.0.1 bootloader no luck then flash 5.1 bootloader flashed philz recovery then 6.0.1 bootloader still nothing! Did i damage something serious ? does a fresh firmware install through odin bring my phone back to life ? Thanks in advance

Please try a fresh install of Firmware. Install MM bootloader and modem first with TWRP MM compatible recovery and download an extra lite MM rom to see if your phone will come back to life, (using extra lite package is less of a download than a stock 2gb download)

TWRP is what gave me the problem once i enter i can exit from there ! i got the stock firmware tried to flash using odin then get fail! please can you give a noob some simple instructions with links ?

Hi mate, Try flashing through ODIN a TAR image for your phone version. You can find a TAR on a website such as sammobile. Once you have download the tar put your phone into download mode by pressing and holding Volume Down, Home and Power keys at the same time. Start ODIN and connect the phone to your computer, click AP and browse and find the TAR file you downloaded. Then click start and it should flash back stock firmware for your phone.

spkos.kos said:
Hi mate, Try flashing through ODIN a TAR image for your phone version. You can find a TAR on a website such as sammobile. Once you have download the tar put your phone into download mode by pressing and holding Volume Down, Home and Power keys at the same time. Start ODIN and connect the phone to your computer, click AP and browse and find the TAR file you downloaded. Then click start and it should flash back stock firmware for your phone.
Click to expand...
Click to collapse
thats what i did i got failed in the last (hidden.img) problem

elias1995ish said:
thats what i did i got failed in the last (hidden.img) problem
Click to expand...
Click to collapse
Another Solution i have is to try Samsung Smart switch software. That might solve your problem, I have used it before when I was stuck .

spkos.kos said:
Another Solution i have is to try Samsung Smart switch software. That might solve your problem, I have used it before when I was stuck .
Click to expand...
Click to collapse
Yes i'm currently trying smart switch software hopefully it will fix !! there is no way that i have hard bricked my device right?

elias1995ish said:
Yes i'm currently trying smart switch software hopefully it will fix !! there is no way that i have hard bricked my device right?
Click to expand...
Click to collapse
I can't promise that you haven't, however it is extremely hard to hard brick a phone these days. There are many ways to try and restore it to previous condition not all of which I am familiar with, if this doesn't solve your problem keep scouring XDA for an answer, undoutably a more skilled dev will be able to help you

spkos.kos said:
I can't promise that you haven't, however it is extremely hard to hard brick a phone these days. There are many ways to try and restore it to previous condition not all of which I am familiar with, if this doesn't solve your problem keep scouring XDA for an answer, undoutably a more skilled dev will be able to help you
Click to expand...
Click to collapse
THANK GOD!! smart switch fixed the issue for me now boots up fine

elias1995ish said:
THANK GOD!! smart switch fixed the issue for me now boots up fine
Click to expand...
Click to collapse
Good job dude! Hit thanks if that solved it fully for u!

Restock Help

Good day guys. I have a 6045Y device and i want to go back to stock lollipop as i was having issues with MM custom roms. Previously i was able to go back to stock directly using mobile upgrade Q software with no problem. But now im having issues with the restock as it give me an error. Retried again alot of times to no avail. Then i saw the ELuga Switch ROm and was able to download it. tried it but still give me error/ Error 40016 and then reboots back to recovery...
Any help with this.

andiemerchcomia said:
Good day guys. I have a 6045Y device and i want to go back to stock lollipop as i was having issues with MM custom roms. Previously i was able to go back to stock directly using mobile upgrade Q software with no problem. But now im having issues with the restock as it give me an error. Retried again alot of times to no avail. Then i saw the ELuga Switch ROm and was able to download it. tried it but still give me error/ Error 40016 and then reboots back to recovery...
Any help with this.
Click to expand...
Click to collapse
Normally after Eluga gets to 45% it will throw 40016, at that point unplugging the phone and powering on the phone eventually brings you to the encryption error reset phone option, at that point pressing reset after abit brings you to setup screen. The error is normal rebooting back to recovery is odd.... I would try again either on another PC or USB port.

kal250 said:
Normally after Eluga gets to 45% it will throw 40016, at that point unplugging the phone and powering on the phone eventually brings you to the encryption error reset phone option, at that point pressing reset after abit brings you to setup screen. The error is normal rebooting back to recovery is odd.... I would try again either on another PC or USB port.
Click to expand...
Click to collapse
It doesnt even get passed 18%. Even the mobile q. Im having problems.

andiemerchcomia said:
It doesnt even get passed 18%. Even the mobile q. Im having problems.
Click to expand...
Click to collapse
Which version of mobile upgrade Q? 5.0.0? Have you tried manually putting phone in download mode? (Power, volume up, volume down held simultaneously until red/black screen, then release, then volume up until screen goes black, your now in download mode)

kal250 said:
Which version of mobile upgrade Q? 5.0.0? Have you tried manually putting phone in download mode? (Power, volume up, volume down held simultaneously until red/black screen, then release, then volume up until screen goes black, your now in download mode)
Click to expand...
Click to collapse
Im using 5.0.0 version of mobile upgrade q. I always use download mode on both eluga firmware and upgradeq

andiemerchcomia said:
Im using 5.0.0 version of mobile upgrade q. I always use download mode on both eluga firmware and upgradeq
Click to expand...
Click to collapse
I'm out of suggestions, sorry. Perhaps try running on a different PC. If the phone is powered off and the software places phone in download mode, does it fail in the same place as when you manually start in download mode?

kal250 said:
I'm out of suggestions, sorry. Perhaps try running on a different PC. If the phone is powered off and the software places phone in download mode, does it fail in the same place as when you manually start in download mode?
Click to expand...
Click to collapse
Yes for mobile upgrade q it finishes the download of software from the server bu when it downloads the software to the phone stuck @99 percent then red errors. While in eluga firmware it gives 40016.
Will be trying at another px

Xz premium G8142 bricked

Guys,my phone gets a problem,a massive problem,so when i press power button it just show a green led light,when i hod it same result a green light shows and disappear and again shows,it have 46 percent battery when this happend but i plug it to charger result like i hold power button,cant enter recovery same like i press power button,fastboot mode is gone when i hod volup and plug to pc it goes on flash mode,flash mode is now have two buttons volup works and vol down works too.i am try to install .75 fromware with newflasher,its installed but my phone still bricked,i install .34 too and it dosent unbrick my phone too.
Please help me because i cant find a way to fix it,oh and i try yo use sony companion but it dosent install on my pc.
And sorry for my bad english.

try to reinstall twrp rwcovery
enter tobrecovery then wipe all data and cash to format ur phone

karrouma said:
try to reinstall twrp rwcovery
enter tobrecovery then wipe all data and cash to format ur phone
Click to expand...
Click to collapse
I havent fastboot mode so i cant flash twrp

Blackghosthm said:
I havent fastboot mode so i cant flash twrp
Click to expand...
Click to collapse
try from flashtool.

karrouma said:
try from flashtool.
Click to expand...
Click to collapse
I dont know how i most do it,but im sure that not gonna help because when i get brick i already haved twrp but i cant boot to recovery.
It look like i lost my phone:crying:

Blackghosthm said:
Guys,my phone gets a problem,a massive problem,so when i press power button it just show a green led light,when i hod it same result a green light shows and disappear and again shows,it have 46 percent battery when this happend but i plug it to charger result like i hold power button,cant enter recovery same like i press power button,fastboot mode is gone when i hod volup and plug to pc it goes on flash mode,flash mode is now have two buttons volup works and vol down works too.i am try to install .75 fromware with newflasher,its installed but my phone still bricked,i install .34 too and it dosent unbrick my phone too.
Please help me because i cant find a way to fix it,oh and i try yo use sony companion but it dosent install on my pc.
And sorry for my bad english.
Click to expand...
Click to collapse
this has happened to me last night i have 22 percnt battery charge my phone, i have turn off my phone because i want to enter again recovery because im doing some installing zip, when i press power then vol down, it was off so i was thinking it was booting into recovery but it wasnt turning on pressing power nothing going recovry nothing, i panic i get my original sony charger then plug it in, after a while it turn on with a battery indicator, i charge it about 60% then tried turning on the device, and magic it turned back to life, i wasnt sure what was happening but next time when ur going to recovery make sure phone is turned off then go from there dont go, turn off while its turning off press power + vol down please dont do this

2 hour on charging but nothing.

Blackghosthm said:
2 hour on charging but nothing.
Click to expand...
Click to collapse
May I ask what did u do before this happen?

ragratz14344 said:
May I ask what did u do before this happen?
Click to expand...
Click to collapse
Im haved carbon rom ,then im going to recovery flash turbo rom flash magisk reboot device(after im go to rom change log i found that root deleted on that version i installed),so boot animation shows up but device turn off i again press power bottun again boot animation shows up and device turn off do that again and same result.so after 3 time im try to going to recovery mode but i found that my phone is bricked.

Blackghosthm said:
Im haved carbon rom ,then im going to recovery flash turbo rom flash magisk reboot device(after im go to rom change log i found that root deleted on that version i installed),so boot animation shows up but device turn off i again press power bottun again boot animation shows up and device turn off do that again and same result.so after 3 time im try to going to recovery mode but i found that my phone is bricked.
Click to expand...
Click to collapse
Oh I see did you have. Clean installation? I mean did u wipe everything before flashing turbo latest tomorrow? Because it needs to have a clean flash Coz of a high sec update and no dirty flashing as posted to his thread,

ragratz14344 said:
Oh I see did you have. Clean installation? I mean did u wipe everything before flashing turbo latest tomorrow? Because it needs to have a clean flash Coz of a high sec update and no dirty flashing as posted to his thread,
Click to expand...
Click to collapse
Im never do a dirty flash always clean flash.
Hope some buddy know how i must fix my phone

I recently fixed a bricked XZP with Flashtool, get the latest stock firmware from Xperifirm if you dont have on hand an older hackable firmware from XperiFIX
in Xperifirm setting, set it to extract firmware automatically once downloaded to speed things up,
In flashtool/Tools/bundles/Create, select source folder (your downloaded extracted firmware)
in device "double click" & select your phone model from the list.
branding: add as your download example, custom_uk
version: firmware version copy & paste from download
copy all files from file list to firmware content & click create
this will build a .ftf flash tools file which can then be flashed to your bricked device
just follow the prompts in flashtool....
worked for me,
good luck

netwave said:
I recently fixed a bricked XZP with Flashtool, get the latest stock firmware from Xperifirm if you dont have on hand an older hackable firmware from XperiFIX
in Xperifirm setting, set it to extract firmware automatically once downloaded to speed things up,
In flashtool/Tools/bundles/Create, select source folder (your downloaded extracted firmware)
in device "double click" & select your phone model from the list.
branding: add as your download example, custom_uk
version: firmware version copy & paste from download
copy all files from file list to firmware content & click create
this will build a .ftf flash tools file which can then be flashed to your bricked device
just follow the prompts in flashtool....
worked for me,
good luck
Click to expand...
Click to collapse
I already haved 3 ftf file i instaled all of them with flashtool nothing change i still have a bricked phone.its look like im so unluckyor others dont experince my problem.
Im hating sony now i never will buy a phone and im gonna tell every body to do not buy a sony phone.im using y3 now and if my phone dosent fix thats gonna be my phone unitl it die.

Guys really no way for me? Im realy upset to why i dont bought a lg phone .because lg has a tool wich i relive my dead g3 with that why sony dosent have a tool like that?

Hey guys I mentioned some thing when i flash rom with flash tool it in somewhere of flash log its said battery stats not found,i domt know it same for others or not can somebody test it and give me result.
Please if someone of you know a proffesional sony developer please give me his id to talk with him.

dear use sonys own flash tool it ll fix your problem

someone121 said:
dear use sonys own flash tool it ll fix your problem
Click to expand...
Click to collapse
How give me a deep solution.
Edit flshimg normaly firmware dosent fixy problem.i dont know what the hell going on my phone it just have flashmode no more and when try any other thing just notification led turn green and off.

u have flash mode or no

someone121 said:
u have flash mode or no
Click to expand...
Click to collapse
Ofcourse i have and flashed .34 amd .75 frimwares with both neflasher and flashtool but none of them fix my problem.is it something that dosent change when we flash stock frimwares.

Lol. Sony phones are really hard to brick. You really can't brick a Sony phone even if you intentionally wanted to. I've even had a failed flash (phone disconnected while flashing) and was still able to flash using flashtool.
Anyways, I know this has been said before, but what happens after you flash using flashtool? Did you check all the boxes for a full wipe?
BTW, bad mouthing a phone just because you can't solve your problem won't help you.