short story: chainfire 3d driver installation--> stuck @ boot--->now downloading a new rom(tried factory reset thru recovery)--->damn thing wont turn off pressing the power button (tried long press)just restarts
Try entering the download mode (power + vol down for a couple of secs).
Confirm that u want to enter it (vol up when asked).
Then try to power off.
Btw chainfires drivers are for ics only i think... installing it over jb causes bootloop, as described above. However today there are not many tegra-exclusive games, the boom has finished, and many unique games were already released in non-tegra version. Better stick with jb and native drivers, but it's only a hint.
Wysyłane z mojego GT-N8000 za pomocą Tapatalk 2
today i was messing around with my tablet i installed a new font and it wanted me to reboot.
then the huawei logo came wich is after huawei mediapad 10 and it got stuck on that
i looked everywhere
i tried entering recovery mode and here are the results
volume up + powerkey was enter fast boot mode you can press power key 10 seconds to reboot
volume down+powerkey was sd card upgrade failed please reboot
powerkey+volume up and down came up with a green android sign and said OK and rebooted
Powerkey+volume up and down then just down same thing as before
im out of ideas :{
Bump plz help me
stck on boot
hi u need to update yr tab via sdcard dload update u will find ur file on huawei site
Last night my G6 rebooted itself and now it is stuck in a fastboot loop. It keeps restarting itself when connected to charger or PC. Nothing happens when phone is disconnected from charger/pc. Only message on screen is "Keep pressing power key for 10 seconds to exit fastboot mode" but it doesnt help. Phone was stock and not rooted...
MLu75 said:
Last night my G6 rebooted itself and now it is stuck in a fastboot loop. It keeps restarting itself when connected to charger or PC. Nothing happens when phone is disconnected from charger/pc. Only message on screen is "Keep pressing power key for 10 seconds to exit fastboot mode" but it doesnt help. Phone was stock and not rooted...
Click to expand...
Click to collapse
did you try to flash the newest rom ?
By the way .... which G6 do you have ? (L11, u10 etc..)
In the title it says U10, thought that would be enough info
I never flashed/rooted a phone before so I didnt try anything so far...
edit: I tried the suggestion from this post: http://forum.xda-developers.com/showpost.php?p=59545669&postcount=4
1. redownload the rom file from official location. ( http://consumer.huawei.com/kh/suppor...h.htm?id=38361 )
It is the official for g6-l11 (-> dl a version for G^-u10 instead)
2. put the update.app into dload folder on your sd card (unpack from the zip)
3. shut down your phone
4. hold volume+ volume- and power button. When it start to boot release the power button, and hold both the volumes until the instalation starts
5. you will see that firmware flashing begin, wait for the end
Click to expand...
Click to collapse
It seems to work, I see the green android dude and text "updating from external storage" but the problem is the phone keeps restarting itself so it doesnt continue with the update... I suspect sometings wrong with the battery, short circuit maybe?
edit 2:
After giving up last night i tried the above procedure one more time this morning...and for some reason the installation continued. Phone has been up and running again since 8:30 this morning...
where can i get stock rom that can be flashed via sp flash tool? my huawei ascend g6-u10 is bricked after flashing b330. any solution for this?
my phone is dead but my pc can still recognize it
Huawei Ascend P7 L07 stuck at"huawei installing, donot press power or remove battery"
Hi everyone,
i just bought a chinese variant of the Huawei Ascend p7 L07 and tried to force upgrade from firmware version B126 Kitkat to Lollipop firmware version B851 as stated in huawei's website.
Now its all a mess because the problem is when i did the force upgrade using volume (up+down)+power, its says "Huawei software installing
DONOT press powerkey or remove battery "
and hangs in there forever. even when i tried to restart it again it keeps going back to that same screen and Just hangs in there. it never boots.
PLEASE ANYONE HELP??????????????????????????????????????????????????
Good morning to all...
At the end, it happened: I fell into the water, and my Honor 8 fell with me. Not sea water, at least...
I left it under the sun for many hours and the screen got better, there were many stains which are now barely visibile.
Furthermore, I can't see anymore "steamy" cameras and light sensor.
Actual symptoms:
Can't power it off. But can't power it on
When booting up with no power cable, it goes into recovery mode. I can only:
- reboot
- wipe data
- wipe cache
If I reboot, goes back to same menu.
"Vol down" moves across the items; "vol up" does nothing.
When battery is near zero, I see a red flash icon, then it reboots, a small vibration, then again the red flash icon, and so on.
With USB power connected, it goes into eRecovery:
- download latest version and recovery
- wipe data/factory reset
- reboot
- shutdown
As earlier, If I reboot, goes back to same menu.
"Vol down" moves across the items; "vol up" does nothing.
If I select "shutdown" it simply reboots and starts over.
Do I have hopes? Can I at least recover data from internal memory?
Thank you.
You could try flash via eRecovery and see if it helps... But I'm sad to say you if you haven't a microSD card It should be hard to recover data without a working system
Inviato dal mio FRD-L09 utilizzando Tapatalk
ScardracS said:
You could try flash via eRecovery and see if it helps... But I'm sad to say you if you haven't a microSD card It should be hard to recover data without a working system
Click to expand...
Click to collapse
I have a microSD, but I need to recover data from internal memory, I don't want to flash, otherwise everything will be lost for sure.
Firware is completely stock, not even rooted ... I believe that the "vol up" button got stuck for some reason (due to water), and that's the reason why it always enters recovery or erecovery.
Is there a way to access to internal memory while in recovery/erecovery?
I tried with ADB, but can't manage...
When I use "adb devices" I can't see any attached device.
lollapalooza said:
I have a microSD, but I need to recover data from internal memory, I don't want to flash, otherwise everything will be lost for sure.
Firware is completely stock, not even rooted ... I believe that the "vol up" button got stuck for some reason (due to water), and that's the reason why it always enters recovery or erecovery.
Is there a way to access to internal memory while in recovery/erecovery?
I tried with ADB, but can't manage...
When I use "adb devices" I can't see any attached device.
Click to expand...
Click to collapse
Which version do you have?
Inviato dal mio FRD-L09 utilizzando Tapatalk
ScardracS said:
Which version do you have?
Click to expand...
Click to collapse
Firmware version you mean?
It's an FRD-L09 (EU), firmware is Android 8, not sure if it's 521 or 562.
lollapalooza said:
Firmware version you mean?
It's an FRD-L09 (EU), firmware is Android 8, not sure if it's 521 or 562.
Click to expand...
Click to collapse
I hoped you have FRD-AL00 because it's supported by Chinese HiSuite version... I sorry but I think your problem is the Vol+ and flashing via eRecovery won't help anyway. I don't think you can restore your internal data unless you boot normally in system...
Inviato dal mio FRD-L09 utilizzando Tapatalk
So I guess there's no way to use adb commands when phone is in recovery mode
lollapalooza said:
So I guess there's no way to use adb commands when phone is in recovery mode
Click to expand...
Click to collapse
I'm sorry but no... The only recovery which can do it is TWRP, but you haven't it
Inviato dal mio FRD-L09 utilizzando Tapatalk
ScardracS said:
I'm sorry but no... The only recovery which can do it is TWRP, but you haven't it
Click to expand...
Click to collapse
Thank you...