Related
I was flashing the latest recovery mod but it failed and i accidentally rebooted the phone. Now it is bricked. Stuck at fastmode enabled. udc_start().
I am trying the flash the original firmware via tha KDZ but after launching the update KDZ throws me an error...Extract File Error
[R&D Test Tools Log File]
19:24:37 : Launching SW update
19:24:37 : Unpacking KDZ
19:24:40 : KDZ file extraced
19:24:40 : Extract file error
19:24:42 : ===FINISHED===
I tried with two Stock Roms...
Please help me in this....
Basically on a windows machine you download kdz updater and uncompress it as it is a zip file.
Download from here.
This is what I did on an xp laptop.
I had to down load the drivers from the official lg site. when here you enter the code that is on the box the phone came in or under the battery.
Chose the your county and laguage from the drop down box at the top right of the dialogue box. Then from the middle you can choose the drivers. For some reason I had to find the files and click on them to install the driver.
Ok once you decompress kdz updater there are three seperate files to work with. 1. windows enabler. 2. msxml.msi 3.KDZ_FW_UPD.exe
You will also need to download the right file to restore with,You can find it with google.
Please check here the The_ERROR thread wich explains it very well:
[ROMS] Original LG Firmware list.
Install msxml now.
Now you have to boot the phone into rescue mode. On Lg Optimus One turn phone off even if it means taking out the battery.
Press power - volume up - back (this button is next to the home button).
Connect to usb now.Computer found new hardware and installed four drivers.
Then open device manager. Left click my computer - properties - device manager. You need to disable the lg modem driver. Left click on it and disable.
Now launch kdz updater. There will be a drop box on left set to 3gspt or similiar. on the right drop box set to diag. The long box just above the info box with a file at the side lets you browse to find restore file. e.g. V10a.00.kdz.
Double click the button below and let it do it's thing. Took 15min. My phone shut down and came up with an error at the last minute. Anyway I rebooted and all was good.
Everything was the way I left it. Just had to re-root.
My only real problem was getting the kdz installer to see the phone.
After installing the drivers restart pc. If it finishes quickly and just before saying finished it says phone not found try removing all phone related drivers including nokia pc suite and the lg suite and remove and reinstall the drivers.
LITTLE ADVICE :You should use some search and keep your eyes open
Two threads related to this are there on the first page itself.
i need help stuck on emergency mode and computer wont recognize phone it did a at the beginning but when connecting I got partition error table on LGMDP, also got an error on KDZ saying someting with error code 1002 ... please help don't wanna take out the battery cause i'm afraid i would have officially bricked it as in it wouldn't start back up! please willing to try anything at the moment!
Just follow the steps which I mentioned above and everything will be alright.
Sent from my LG-P500 using XDA App
help me..!!
m also struck on emergency mode
i have try to flash using kdz...(v20d.00)
but my phon is not detecting..
i try to install drivers..but when i plug my device it says drivers not found..
please help me...!!
is it any hardware problem of pc /phone...??
rahulgharat95 said:
m also struck on emergency mode
i have try to flash using kdz...(v20d.00)
but my phon is not detecting..
i try to install drivers..but when i plug my device it says drivers not found..
please help me...!!
is it any hardware problem of pc /phone...??
Click to expand...
Click to collapse
No, i suggest you do not use kdz updater, it had high chances of bricking your phone.
Sent from my LG-P500 using xda app-developers app
Junior Einstein said:
No, i suggest you do not use kdz updater, it had high chances of bricking your phone.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
ok...
but do u have any solution for this..??
Junior Einstein said:
No, i suggest you do not use kdz updater, it had high chances of bricking your phone.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
It once bricked my phone too when I removed battery in emergency mode. But after that I used it many times and it worked flawlessly.
You can definitely use kdz, when you know what are you doing.
Sent from my LG-P500
williamcharles said:
I was flashing the latest recovery mod but it failed and i accidentally rebooted the phone. Now it is bricked. Stuck at fastmode enabled. udc_start().
I am trying the flash the original firmware via tha KDZ but after launching the update KDZ throws me an error...Extract File Error
[R&D Test Tools Log File]
19:24:37 : Launching SW update
19:24:37 : Unpacking KDZ
19:24:40 : KDZ file extraced
19:24:40 : Extract file error
19:24:42 : ===FINISHED===
I tried with two Stock Roms...
Please help me in this....
Click to expand...
Click to collapse
this is exactly what happens for me and it seems there is no solution for it!!!!!!
same problem here can someone help me with lg-D605
Well, hello everyone
I was hoping it would not come to this, but this is a dire emergency. I am sort of new to this as well.
My Droid Razr M or (xt907) was boring so I rooted it. After doing so I wanted to look through some settings and stuff to see what it could do. I tried to add partitions to my sd card along the line and when I did so I must have chosen the wrong place, even though it said SD and it did not crash when i did whatever it was. I was using an app to make partitions I forget the name, but when I did so it asked to restart and after it did it showed the AP fastboot Flash mode screen
this is what it shows exactly...
-------------------------------------------------------------------
Device is LOCKED, Status Code: 0
Battery OK
Transfer mode:
USB Connected
Failed to hab check for gpt_main: 0x35
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
-----------------------------------------------
I have no clue what to do, and I really need my phone. I dont have any knowledge of android programing.
Someone please just help me.
magranger18 said:
Well, hello everyone
I was hoping it would not come to this, but this is a dire emergency. I am sort of new to this as well.
My Droid Razr M or (xt907) was boring so I rooted it. After doing so I wanted to look through some settings and stuff to see what it could do. I tried to add partitions to my sd card along the line and when I did so I must have chosen the wrong place, even though it said SD and it did not crash when i did whatever it was. I was using an app to make partitions I forget the name, but when I did so it asked to restart and after it did it showed the AP fastboot Flash mode screen
this is what it shows exactly...
-------------------------------------------------------------------
Device is LOCKED, Status Code: 0
Battery OK
Transfer mode:
USB Connected
Failed to hab check for gpt_main: 0x35
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
-----------------------------------------------
I have no clue what to do, and I really need my phone. I dont have any knowledge of android programing.
Someone please just help me.
Click to expand...
Click to collapse
Razr M forum - http://forum.xda-developers.com/droid-razr-m?nocache=1&z=2858141673778650. You need try to reflash stock rom via RSD Lite.
turffe said:
Razr M forum - http://forum.xda-developers.com/droid-razr-m?nocache=1&z=2858141673778650. You need try to reflash stock rom via RSD Lite.
Click to expand...
Click to collapse
I have tried this, but when I plug my phone to the PC and open the program it cannot find my phone.
magranger18 said:
I have tried this, but when I plug my phone to the PC and open the program it cannot find my phone.
Click to expand...
Click to collapse
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
I tried this
turffe said:
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
Click to expand...
Click to collapse
I have already tried this, I re downloaded the Motorola drivers from the website and reinstalled the RSD lite. It cannot be a problem with m USB, but I will try this on a new PC and tell you when I do. Thanks.
simillar isssue
turffe said:
Try install latest RSD Lite + Drivers. I think it's drivers problem or try with other UBS & computer.
Click to expand...
Click to collapse
I downloaded flasher tool in my xt907 and installed cwm recovery . Once this was completed , Upon next reboot I get the following screen that I can't get past:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-6114a2, 2014-05-02 00:54:39)
eMMC Info: Size 8GB
Device is Locked, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb connected
Recovery tool used: Well I don't know now because installing this seems to have wiped my boot loader/boot straper
plz help me as soon as possible
p.s i dont know much about this stuff
My LG G2 D800 (AT&T) 32 GB is stuck in download mode and I cannot flash the stock ROM to it.
I can't get out of download mode no matter how I try to press keys at boot, etc. -- just a black screen with the LG logo.
adb devices returns no devices found.
Shows in Windows Device Manager as "LGE AndroidNet USB Serial Port (COM4)."
Flash Tool finds my device, but when I try to flash (using dll C:\Users\SAdra\Downloads\LGD800_20130904_LGFLASHv160.dll and S/W LGD800AT-01-V10O-310-410-OCT-19-2013+0.tot), it fails immediately and says "Model Information Check Fail!"
It shows "IMEI : " and "Model : ". That's really scary if that information has truly disappeared (not sure how that could have happened though). I at least have the IMEI on a sticker on the back.
I used ioroot to successfully enter root mode, so I should have an EFS backup, but I don't know how to recover it since I'm in download mode and the only tool I have to work with is the LG FlashTool, which isn't happy with me right now. I've tried key combinations but I can't seem to enter recovery mode or fastboot or anything from here.
Previously I was stuck in a fastboot loop but then I re-flashed most of the stock partitions from (downloads.codefi.re 10d_partitions directory under D800 Stock_Firmware) -- I remember doing this for aboot, boot, dbi, laf, modem, recovery, and abl1 -- I was following some dumb forum post in which someone recommended doing that -- duhh...
I would be happy at this point if I could get back into my fastboot loop -- at least I could flash stuff from there.
What got me into the fastboot loop in the first place was flashing the BeanStalk ROM (it was a two-part thing where you were supposed to first flash the main ROM and then flash a device-specific patch -- well, the initial ROM flash got me into the fastboot loop).
Any recommendations? If I were to use Linux, would I have any other options -- I've seen people mention flashing partitions using dd?
At this point I'm about ready to take it in to AT&T (still under warranty / in contract) and beg for help, although I know I've obviously voided my warranty by rooting it.
I've seen a few older threads where people are stuck in download mode and have the same "model information" error in FlashTool, and it seems nobody ever replies to those threads, so I think I'm out of luck. If anybody has gone through this or has any idea what I can do, I would really appreciate the help.
Thanks,
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
bassist82 said:
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
Click to expand...
Click to collapse
did you solved it? im in same situation
Any news? Thanks
bassist82 said:
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
Click to expand...
Click to collapse
did you found the solution ?? same problem
I'm in the same situation. Flashed the wrong rom and now stuck at lg logo. Lg flash tool keeps erroring out with mismatch model numbers. The universal file also errors out. Anyone have a way to save it? I even hex edited the files and ended up with mismatched bin number. I feel I'm so close. Lg flash tool just keeps getting confused. Is it a full brick and a lost cause?
Sent from my SM-G900T using Tapatalk
Anybody???
Sent from my SM-G900T using XDA Free mobile app
I had the same problem quite a while ago and found that the firmware i downloaded was not the right one, downloaded 20c and related dll and it worked search for it.
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
I had the same problem quite a while ago and found that the firmware i downloaded was not the right one, downloaded 20c and related dll and it worked search for it.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the suggestion but it still didn't work. Here are pics for what's happening.
1.) It's an at&t g2.
2.) Here's the wrong ROM that was flashed. (Cloudy)
3.) This is the error I Gerry from lgflashtool. (Wrong model)
4.) If I use the alternate DLL in op post then this is the error. (Crossdll)
I just can't get it to unbrick. Any other suggestions I'm site would help a ton of other people. Thanks in advance!
Sent from my Samsung Galaxy S5 using XDA Free mobile app
In the 2nd pic it says f320l but in 3rd pic it says d801 T-Mobile and firmware version reads 20e, if it is an at&t phone there is only 20c tot and dll available now, so if u could go back to stock recovery and clean everything and then download 20c firmware and dll u should be good to go. If u still cant flash 20c firmware try 20d not 20o as it 20d is what my g2 came with first.
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
In the 2nd pic it says f320l but in 3rd pic it says d801 T-Mobile and firmware version reads 20e, if it is an at&t phone there is only 20c tot and dll available now, so if u could go back to stock recovery and clean everything and then download 20c firmware and dll u should be good to go. If u still cant flash 20c firmware try 20d not 20o as it 20d is what my g2 came with first.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
That's what's weird. I am using the 20c tot. I have stock recovery. Return to factory does nothing. Still a brick. Anyone else have my problem and overcome it?
Sent from my SM-G900T using XDA Free mobile app
jayb222 said:
That's what's weird. I am using the 20c tot. I have stock recovery. Return to factory does nothing. Still a brick. Anyone else have my problem and overcome it?
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Pm me I think I can help. Sorry I may be a month late
SamerAdra said:
My LG G2 D800 (AT&T) 32 GB is stuck in download mode and I cannot flash the stock ROM to it.
I can't get out of download mode no matter how I try to press keys at boot, etc. -- just a black screen with the LG logo.
adb devices returns no devices found.
Shows in Windows Device Manager as "LGE AndroidNet USB Serial Port (COM4)."
Flash Tool finds my device, but when I try to flash (using dll C:\Users\SAdra\Downloads\LGD800_20130904_LGFLASHv160.dll and S/W LGD800AT-01-V10O-310-410-OCT-19-2013+0.tot), it fails immediately and says "Model Information Check Fail!"
It shows "IMEI : " and "Model : ". That's really scary if that information has truly disappeared (not sure how that could have happened though). I at least have the IMEI on a sticker on the back.
I used ioroot to successfully enter root mode, so I should have an EFS backup, but I don't know how to recover it since I'm in download mode and the only tool I have to work with is the LG FlashTool, which isn't happy with me right now. I've tried key combinations but I can't seem to enter recovery mode or fastboot or anything from here.
Previously I was stuck in a fastboot loop but then I re-flashed most of the stock partitions from (downloads.codefi.re 10d_partitions directory under D800 Stock_Firmware) -- I remember doing this for aboot, boot, dbi, laf, modem, recovery, and abl1 -- I was following some dumb forum post in which someone recommended doing that -- duhh...
I would be happy at this point if I could get back into my fastboot loop -- at least I could flash stuff from there.
What got me into the fastboot loop in the first place was flashing the BeanStalk ROM (it was a two-part thing where you were supposed to first flash the main ROM and then flash a device-specific patch -- well, the initial ROM flash got me into the fastboot loop).
Any recommendations? If I were to use Linux, would I have any other options -- I've seen people mention flashing partitions using dd?
At this point I'm about ready to take it in to AT&T (still under warranty / in contract) and beg for help, although I know I've obviously voided my warranty by rooting it.
I've seen a few older threads where people are stuck in download mode and have the same "model information" error in FlashTool, and it seems nobody ever replies to those threads, so I think I'm out of luck. If anybody has gone through this or has any idea what I can do, I would really appreciate the help.
Thanks,
Click to expand...
Click to collapse
Hey,i had same issue but i solved it with srk tool 2.0 try it,it works for me don,t forget to hit thanks
I successfully rooted my H830 2 days ago, but today I followed this thread trying to get some adoptive storage, http://forum.xda-developers.com/lg-g5/how-to/enable-adoptable-storage-t3368207 and it bricked my phone. So be careful to modify your build.prop file.
Update: the boot problem was caused by build.prop's permission, I did the change in PC and copied it back to Android, but I forgot changing the permission to 744.
Anyway, it also gave me an opportunity to try some method to unbrick my phone.
1. First I tried LGUP and stock TOT file, I got an "unknown model“ error when opening LGUP. It worked fine 2 days ago when flashing the modified TOT file. And there's no driver issue, in device manager I can see "LGE AndroidNet USB Serial Port (COM3)". I guess LGUP need to recognize the phone when it's up for the first time.
2. I also tried LG flash 2.1.0.6, this one totally not work on H830, it failed to load the TOT file.
So please share the information with me if you know how to work around the LGUP "unknown model" error or any other way to unbrick LG G5 H830. Thanks in advance.
Are you able to get into TWRP? If so, you could try editing your build.prop through the terminal using vi. Maybe revert the changes you made?
joeblk said:
I successfully rooted my H830 2 days ago, but today I followed this thread trying to get some adoptive storage, http://forum.xda-developers.com/lg-g5/how-to/enable-adoptable-storage-t3368207 and it bricked my phone. So be careful to modify your build.prop file.
Anyway, it also gave me an opportunity to try some method to unbrick my phone.
1. First I tried LGUP and stock TOT file, I got an "unknown model“ error when opening LGUP. It worked fine 2 days ago when flashing the modified TOT file. And there's no driver issue, in device manager I can see "LGE AndroidNet USB Serial Port (COM3)". I guess LGUP need to recognize the phone when it's up for the first time.
2. I also tried LG flash 2.1.0.6, this one totally not work on H830, it failed to load the TOT file.
So please share the information with me if you know how to work around the LGUP "unknown model" error or any other way to unbrick LG G5 H830. Thanks in advance.
Click to expand...
Click to collapse
If you simply changed a line in your build.prop i doubt you are hard bricked. As the other user suggested boot into recovery (vol down + power when you see the lg logo let go of power and quickly press and holding power again. then select yes) once in twrp plug your phone into comp and adb push a stock build prop. you will have to ask someone to pull theres for you.
kwkw480 said:
If you simply changed a line in your build.prop i doubt you are hard bricked. As the other user suggested boot into recovery (vol down + power when you see the lg logo let go of power and quickly press and holding power again. then select yes) once in twrp plug your phone into comp and adb push a stock build prop. you will have to ask someone to pull theres for you.
Click to expand...
Click to collapse
Unheard said:
Are you able to get into TWRP? If so, you could try editing your build.prop through the terminal using vi. Maybe revert the changes you made?
Click to expand...
Click to collapse
Yes, you both are right. The problem was caused by build.prop's file permission. I did the change in PC, and copied back to android, but I forgot changing the permission to 744. That's why I cannot boot.
I just boot into TWRP and correct the permission, it all works now.
Thanks both for the help.
joeblk said:
Yes, you both are right. The problem was caused by build.prop's file permission. I did the change in PC, and copied back to android, but I forgot changing the permission to 744. That's why I cannot boot.
I just boot into TWRP and correct the permission, it all works now.
Thanks both for the help.
Click to expand...
Click to collapse
No problem mate, glad to help.
joeblk said:
I successfully rooted my H830 2 days ago, but today I followed this thread trying to get some adoptive storage, http://forum.xda-developers.com/lg-g5/how-to/enable-adoptable-storage-t3368207 and it bricked my phone. So be careful to modify your build.prop file.
Update: the boot problem was caused by build.prop's permission, I did the change in PC and copied it back to Android, but I forgot changing the permission to 744.
Anyway, it also gave me an opportunity to try some method to unbrick my phone.
1. First I tried LGUP and stock TOT file, I got an "unknown model“ error when opening LGUP. It worked fine 2 days ago when flashing the modified TOT file. And there's no driver issue, in device manager I can see "LGE AndroidNet USB Serial Port (COM3)". I guess LGUP need to recognize the phone when it's up for the first time.
2. I also tried LG flash 2.1.0.6, this one totally not work on H830, it failed to load the TOT file.
So please share the information with me if you know how to work around the LGUP "unknown model" error or any other way to unbrick LG G5 H830. Thanks in advance.
Click to expand...
Click to collapse
So where did you find a stock TOT file for the H30 (not the rooted one)...could really use that right about now...
Android_Guy said:
So where did you find a stock TOT file for the H30 (not the rooted one)...could really use that right about now...
Click to expand...
Click to collapse
It's in the root thread 6th one down.
http://forum.xda-developers.com/tmobile-lg-g5/development/root-h830-t3384526
Android_Guy said:
So where did you find a stock TOT file for the H30 (not the rooted one)...could really use that right about now...
Click to expand...
Click to collapse
I did not try it myself since I was able to solve the problem by changing the file permission.
Where can one find the stock buildprop file for the Tmobile G5?
Hello All, I think I hard bricked my phone.
I cant seem to connect to my phone with LGUP directly with all USB and DLL's installed. I had to use Uppercut
I tried to use Uppercut+LGUP and downgrade my OS to the previous version, however it always fails at 11%.
Failing which, My phone seems to be a brick.
When I power on my phone the only thing I see is...
LG Logo. then immediately, Firmware Update
If I plug in the power to charge, the phone shows the same thing.
LG Logo. then immediately, Firmware Update
If I trry to boot into recovery (vol down + power when you see the lg logo let go of power and quickly press and holding power again.)
Same thing...
LG Logo. then immediately, Firmware Update
Any suggestions?
Thanks.
deadbanana0717 said:
Hello All, I think I hard bricked my phone.
I cant seem to connect to my phone with LGUP directly with all USB and DLL's installed. I had to use Uppercut
I tried to use Uppercut+LGUP and downgrade my OS to the previous version, however it always fails at 11%.
Failing which, My phone seems to be a brick.
When I power on my phone the only thing I see is...
LG Logo. then immediately, Firmware Update
If I plug in the power to charge, the phone shows the same thing.
LG Logo. then immediately, Firmware Update
If I trry to boot into recovery (vol down + power when you see the lg logo let go of power and quickly press and holding power again.)
Same thing...
LG Logo. then immediately, Firmware Update
Any suggestions?
Thanks.
Click to expand...
Click to collapse
SInce you're already in download mode, I would just use LG Uppercut and load the 20A rom. Let me know if you have any other issues.
djerick3 said:
SInce you're already in download mode, I would just use LG Uppercut and load the 20A rom. Let me know if you have any other issues.
Click to expand...
Click to collapse
Hi! Could you please link me to a working 20A ROM please?
Have you done any aftermarket ROMs yet? Kind of want to try cynogen/lineage but still need to unlock first.
Sent from my A0001 using Tapatalk
deadbanana0717 said:
Hi! Could you please link me to a working 20A ROM please?
Have you done any aftermarket ROMs yet? Kind of want to try cynogen/lineage but still need to unlock first.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
You can have a look at this guide. Perhaps can help
https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508
Thanks!! I will give this a shot.
Sent from my A0001 using Tapatalk
Hi All,
I tried flashing my
H83110a with UPPERCUT_1.0.0.0 and LGUP 1.14
H83110d_00_0504
H83110h_00_0901
No luck.
I prefer the older OS.
I will try to install the newer next time. Will keep you posted.
For Those whohttps://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508 want to go back to stock but lgup is not recognizing the phone should try instructions from following thread. It uses lg flash tool for flashing
I followed the instructions from another form for rooting LG G5 H8320:
https://forum.xda-developers.com/tmobile-lg-g5/development/root-h830-t3384526
but did it without 1) enabling debugging mode or 2) doing the OEM unlock.
Seeing as I'm a complete noob, I didn't know to do this, and found out about this after reading a few other forums.
Device only boots to "Firmware update" screen now. Should I throw the device away? Or are one of you the second coming of our lord and savior and able to resurrect this thing from the dead?
JasonFam said:
I followed the instructions from another form for rooting LG G5 H8320:
https://forum.xda-developers.com/tmobile-lg-g5/development/root-h830-t3384526
but did it without 1) enabling debugging mode or 2) doing the OEM unlock.
Seeing as I'm a complete noob, I didn't know to do this, and found out about this after reading a few other forums.
Device only boots to "Firmware update" screen now. Should I throw the device away? Or are one of you the second coming of our lord and savior and able to resurrect this thing from the dead?
Click to expand...
Click to collapse
Just to be clear, the instructions did not include these two steps as it was assumed noobs weren't reading I imagine?
Download LG program on your computer, and put the phone to download mode to restore it.
A brick means that it does not turn on at all due to software program.
bro if your device starts up and shows software update mode (download mode) you can flash official or tut using LGUP tool connecting it to PC...
have you tried flashing it with kdz files??
Doesnt work
hotsamfisher said:
bro if your device starts up and shows software update mode (download mode) you can flash official or tut using LGUP tool connecting it to PC...
have you tried flashing it with kdz files??
Click to expand...
Click to collapse
Doesn't work.
Tried LGUP I get error:
error: Error Code = 0x2BC, Invalid command response code = 0x80000121
Tried unlocking the bootloader, using adb and that doesnt work either since I didn't enable oem unlock:crying: