Hi my opo is stuck in a soft brick I tried a couple of methods but none of them works I think it's because my drivers (I'm on Windows 10)
This is what I get from the device manager
Could someone please help me? Thanks in advance
Ronii10 said:
Hi my opo is stuck in a soft brick I tried a couple of methods but none of them works I think it's because my drivers (I'm on Windows 10)
This is what I get from the device manager
Could someone please help me? Thanks in advance
Click to expand...
Click to collapse
I solved it close the thread
Related
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Well Bro it seems to like you had been bricked your phone
In this Forum You can find Way to unbrick your mobile
it may need to install new rom then it will be normal
http://http://forum.xda-developers.com/forumdisplay.php?f=656
http://forum.xda-developers.com/showthread.php?t=984140&highlight=unbrick
I think this would help you if so please click on Thank You Button
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
u had atleast 70% battery?
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
sound like u just killed ur phone try using adb to mannually install all software( im used to htc idk if applys to samsung)
adb flash flash your_rom.zip
do this in fastbootusb mode(bootloader)
i had the same problem
Did you fix it?
Sent from my GT-I9000 using xda premium
I need a Professional Answer to a Beginner user
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
Hello again;
Thanks for the fast responds but ...
I need a Professional Answer to a Beginner user.
I want to know how to fix my phone step by step from a to z
for example which applications i need to install on my computer to fix my phone etc.
anyone has patience to explain to me briefly?
well, at first you need odin
google odin android or sth like that and google odin pit file 512.
go to sammobile and look for the firmware you want to have (you need to register on sammobile.com to do this)
after that, make sure you have samsung kies installed, but NOT running (check via taskmanager-processes, if you see something with 'kies' in it, close that).
run odin
use pit file s1_odin_20100512.pit in pit tab
use CODE file in PDA tab
use MODEM file in PHONE tab
use GT-I9000-CSC... file in CSC tab
make sure the repartition box, auto reboot box, f.reset time box are checked (dump, phone efs clear, phone bootloader update NOT)
set your phone to download mode (hold volume down, home button an on/off button at the same time until the android with a shovel appears)
plug your phone via usb in to your computer, in odin should appear a yellow sign at ID:COM
hit start in odin
wait til its done
(i hope this works out, thats what i did, when i bricked my phone once)
i dont take responsibilty for damages on your phone!
you do this at your own risk!
ps: sorry for my bad english..
http://forum.xda-developers.com/showthread.php?t=1139050
Hello guys! I searched a lot before posting it here,but I'm very fearing a soft-hard brick..
I explain: I'm running Cyanogenmod 11 M7 (Htc One S, not version C2), and today I got an auto reboot. Now, I'm stuck in bootloop, without the power to enter bootloader or recovery with phone buttons. I tried adb and fastboot, but obviously the second can't run, the first can't run because pc can't install htc one s drivers. I tried to install them by my self (found here, in htc one s section) but adb still doesn't recognize my smarthphone.
What can I do? Please, I'm desperate.
Thanks a lot for every help You can give me and sorry if I choose the wrong section!
Massimo
Maioranoo91 said:
Hello guys! I searched a lot before posting it here,but I'm very fearing a soft-hard brick..
I explain: I'm running Cyanogenmod 11 M7 (Htc One S, not version C2), and today I got an auto reboot. Now, I'm stuck in bootloop, without the power to enter bootloader or recovery with phone buttons. I tried adb and fastboot, but obviously the second can't run, the first can't run because pc can't install htc one s drivers. I tried to install them by my self (found here, in htc one s section) but adb still doesn't recognize my smarthphone.
What can I do? Please, I'm desperate.
Thanks a lot for every help You can give me and sorry if I choose the wrong section!
Massimo
Click to expand...
Click to collapse
my pc didnt recognize my phone first time i used odin, try using another port
u could also flash new rom for ur device using odin
ive no responsibility about any damage in ur device!!! DO IT ON YOUR OWN RISK
Odin is for Samsung device!
Please, help me..
Hi all!
I wanted to reinstall the software stock Coolpad Download Assistant, everything went well until 100% and now the phone does not start, screen is black and the computer is seen as "QHSUSB_BULK". I can not reinstall the software, do not enter recovery is dead!
Please help me if possible!
Thanks in advanced!
Regards!
coolpad 888
blue36 said:
Hi all!
I wanted to reinstall the software stock Coolpad Download Assistant, everything went well until 100% and now the phone does not start, screen is black and the computer is seen as "QHSUSB_BULK". I can not reinstall the software, do not enter recovery is dead!
Please help me if possible!
Thanks in advanced!
Regards!
Click to expand...
Click to collapse
i need too the rom with vodafone greek language please help
Hello guys,
Sorry for posting another hard bricked opo thread but I'm out of hopes and my last hope is you guys.
I hard bricked my OnePlus one a few days ago.
I tried to unbrick it a lot of times with Msm8974DownloadTool.exe with no luck.
My drivers seems to work fine and the Msm8974DownloadTool.exe doesn't run till the end. It always loops on installing 8974_msimage.mbn.
Please help, you are my last chance on reviving my dead phone
Im running Windows 10
Thanks a lot!
If you still need help, just send me a PM. I'll try to help you with a Teamviewer session.
https://forums.oneplus.net/threads/solution-bricked-oneplus-one-recovery.306306/
This one helped me,and rescued my phone! Try it
When you say hard bricked do you mean Literally nothing when holding power (no lights, backlight and vibrations or screen) or you do get any of those.
I got my s2 stuck once and I thought it was off but what actually happened was the backlight was on showing nothing and you could only see the backlight with my rooms lights off
bomziakas8 said:
Hello guys,
Sorry for posting another hard bricked opo thread but I'm out of hopes and my last hope is you guys.
I hard bricked my OnePlus one a few days ago.
I tried to unbrick it a lot of times with Msm8974DownloadTool.exe with no luck.
My drivers seems to work fine and the Msm8974DownloadTool.exe doesn't run till the end. It always loops on installing 8974_msimage.mbn.
Please help, you are my last chance on reviving my dead phone
Im running Windows 10
Thanks a lot!
Click to expand...
Click to collapse
Were you able to figure this out?
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Tiks_Baralous said:
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find very little information for your device apart from this thread which may help, can you connect to the device just using fastboot ?
https://forum.xda-developers.com/android/general/tutorial-micromax-canvas-knight-a290-t2872896
Good Luck
Sawdoctor