Hello guys,
Sorry for posting another hard bricked opo thread but I'm out of hopes and my last hope is you guys.
I hard bricked my OnePlus one a few days ago.
I tried to unbrick it a lot of times with Msm8974DownloadTool.exe with no luck.
My drivers seems to work fine and the Msm8974DownloadTool.exe doesn't run till the end. It always loops on installing 8974_msimage.mbn.
Please help, you are my last chance on reviving my dead phone
Im running Windows 10
Thanks a lot!
If you still need help, just send me a PM. I'll try to help you with a Teamviewer session.
https://forums.oneplus.net/threads/solution-bricked-oneplus-one-recovery.306306/
This one helped me,and rescued my phone! Try it
When you say hard bricked do you mean Literally nothing when holding power (no lights, backlight and vibrations or screen) or you do get any of those.
I got my s2 stuck once and I thought it was off but what actually happened was the backlight was on showing nothing and you could only see the backlight with my rooms lights off
bomziakas8 said:
Hello guys,
Sorry for posting another hard bricked opo thread but I'm out of hopes and my last hope is you guys.
I hard bricked my OnePlus one a few days ago.
I tried to unbrick it a lot of times with Msm8974DownloadTool.exe with no luck.
My drivers seems to work fine and the Msm8974DownloadTool.exe doesn't run till the end. It always loops on installing 8974_msimage.mbn.
Please help, you are my last chance on reviving my dead phone
Im running Windows 10
Thanks a lot!
Click to expand...
Click to collapse
Were you able to figure this out?
Related
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse
Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?
This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.
Hi my opo is stuck in a soft brick I tried a couple of methods but none of them works I think it's because my drivers (I'm on Windows 10)
This is what I get from the device manager
Could someone please help me? Thanks in advance
Ronii10 said:
Hi my opo is stuck in a soft brick I tried a couple of methods but none of them works I think it's because my drivers (I'm on Windows 10)
This is what I get from the device manager
Could someone please help me? Thanks in advance
Click to expand...
Click to collapse
I solved it close the thread
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Tiks_Baralous said:
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find very little information for your device apart from this thread which may help, can you connect to the device just using fastboot ?
https://forum.xda-developers.com/android/general/tutorial-micromax-canvas-knight-a290-t2872896
Good Luck
Sawdoctor
Pantech Vega R3 IM-a850s
Android 4.4
NOT rooted
I wanted to fix my old phone that I gave to my brother. He said when it overheated then he turn if off when he tried to open it, it does not boot anymore. I tried to do the power + volume down but it didnt work anymore. I tried to connect it on my laptop there's a sound but it doesn't show anything...
it got already got bricked before but after sometime i managed to reset it and recover but after this not anymore....
is there any chance to fix it? How?
Thanks in advance
shupaoshumai said:
Pantech Vega R3 IM-a850s
Android 4.4
NOT rooted
I wanted to fix my old phone that I gave to my brother. He said when it overheated then he turn if off when he tried to open it, it does not boot anymore. I tried to do the power + volume down but it didnt work anymore. I tried to connect it on my laptop there's a sound but it doesn't show anything...
it got already got bricked before but after sometime i managed to reset it and recover but after this not anymore....
is there any chance to fix it? How?
Thanks in advance
Click to expand...
Click to collapse
Greetings and welcome to assist. If your pc recognises the device then there is a chance, you could try this
https://forum.xda-developers.com/android/general/official-update-pantech-im-850-l-t2914736
Good luck
Sawdoctor
I have no idea what happened beside the battery completely drained and I was left hard bricked. I only have the blinking led. No mode beside EDL. Was rooted, stock rom android 11 and stock recovery. Phone had been stolen and possibly had someone trying to get in it. Appeared fine and in working order before it died though.
I have tried 3 different version blankflash files. I have been using sofiap. A few times (tried about 50x) they went all the way through to "fastboot reboot", but fastboot NEVER opens. Just same situation as before. May be an issue with singleimage.bin? Since blankflash doesn't seem to be effective, can I use another program (Qualcomm programs, Flash tools or other)? I have tried finding a solution, searched endlessly and have the same brick I had.
Please advise and help with the exact files, links, etc. The easiest way would be awesome. I would greatly appreciate any/all assistance.
Jaymi
jayleemcnabb81 said:
I have no idea what happened beside the battery completely drained and I was left hard bricked. I only have the blinking led. No mode beside EDL. Was rooted, stock rom android 11 and stock recovery. Phone had been stolen and possibly had someone trying to get in it. Appeared fine and in working order before it died though.
I have tried 3 different version blankflash files. I have been using sofiap. A few times (tried about 50x) they went all the way through to "fastboot reboot", but fastboot NEVER opens. Just same situation as before. May be an issue with singleimage.bin? Since blankflash doesn't seem to be effective, can I use another program (Qualcomm programs, Flash tools or other)? I have tried finding a solution, searched endlessly and have the same brick I had.
Please advise and help with the exact files, links, etc. The easiest way would be awesome. I would greatly appreciate any/all assistance.
Jaymi
Click to expand...
Click to collapse
Hard bricked mine too.
Metro G Stylus 2021.
acrinym said:
Hard bricked mine too.
Metro G Stylus 2021.
Click to expand...
Click to collapse
I Switched to Slot B and now it doesn't do anything except go into EDL.
Hey @sd_shadow, any idea what we could do to fix this mess? This is a phone I'm supposed to return.
I'm still stuck with a brick. Have been for months. Took it apart (why not it doesn't work anyway) and tried the points thing to put it in edl and still nothing. WE NEED ADVICE PRETTY PLEASE.
Thanks in advance,
Jaymi
acrinym said:
Hey @sd_shadow, any idea what we could do to fix this mess? This is a phone I'm supposed to return.
Click to expand...
Click to collapse
If it's a warranty return it shouldn't matter