my moto Maxx XT1225 is stuck in the bootloader - Moto Maxx Q&A, Help & Troubleshooting

I hope my Moto Maxx can be revived with your help!
Hello XDA community,
I live in Germany and my English is not the best.
3 months ago I have a Motorola XT1225 imported me from the US and was very happy because I'm hot since its announcement on this smart phone.
It already Marshmellow had installed and everything was great until I was in Flash Mode and forgot to activate USB Debuging.
Suddenly and since then the phone is stuck there.
the Phone isn't rooted !
I can control by fastboot, and perform basic commands, but goes further than "photo One" not.
i ask you herewith for advice and help.

have u tried via mfastboot flash ur phone with RETBR 6.01 again?
i've seen the edit

Related

Moto G XT1033 not starting, seems dead.

Hi,
I have Moto G XT1033 Indian version, Few days ago I unlocked my device and installed Lollipop 5.0.1 using this thread (http://forum.xda-developers.com/moto-g/general/guide-convert-brazilian-firmware-gpe-5-t2969472), So the device turned into XT1032 GPE with single sim functionality. It was working perfectly, Then I decided to return to the stock ROM, so downloaded the gpe 4.4.4 rom and installed using this thread (http://forum.xda-developers.com/moto-g/general/guide-xt1033-downgrade-lollipop-5-0-to-t2969729), it was fine, Though there was an small issue at this time, when I start the device the display was getting flickered, But If I lock the phone for 5 secs and unlock, it goes, Else everything was ok. After that I downloaded the 4.4.2 with stock files for XT1033 and flashed my device using this thread (http://forum.xda-developers.com/moto-g/general/xt1033-t2821556) which turned my device into XT1033 from XT1032 with 4.4.2.
Then I got the update of 4.4.4 in my device so downloaded it. When I clicked on install, it was saying the charge should be more that 25%, I had 23% that time. I put the device in charging, When it came in 30% to 35%, again clicked on install update while it was in charging, It started installing the updates, Everything fine till then, I did not follow the device for few mins , After that I saw the there was no light in the screen in the device, I thought it might updated and shut down.
Now the problem is I can not turn my device on. My attempts..
1) Hold power key for a long time
2) Volume key down+power key for 2 mins,3mins, at least to enter into bootloader mode.
3) Putting on charge for more than a hour.
Nothing worked for me. It seems to me totally dead. Any help is appreciated, thanks in advance!!!
It won't turn anymore... Corrupted motoboot partition. It corrupted when you tried to update via OTA... It is the only way that can happens by the way.
Now you'll need to wait the official release and the know famous MBM CI 5 to get your device online again.
Sorry =/
Can I use 4.4.4: MBM-CI_4.4.4 ?
felipeap said:
It won't turn anymore... Corrupted motoboot partition. It corrupted when you tried to update via OTA... It is the only way that can happens by the way.
Now you'll need to wait the official release and the know famous MBM CI 5 to get your device online again.
Sorry =/
Click to expand...
Click to collapse
Did you mean, When I tried to update the system to 4.4.4 given by the OTA, it crashed? Can I use this one (4.4.4: MBM-CI_4.4.4)?
Regards.
Estimated release date of MBM CI 5 ?
Can anybody please tell me what is the estimated release date of MBM CI 5 ? Should I visit the Motorola Service Centre ? Though the it will not cover the warranty any more. I can not see my phone as a dead brick any more. Any help please! Thanks in advance.
k_allol said:
Can anybody please tell me what is the estimated release date of MBM CI 5 ? Should I visit the Motorola Service Centre ? Though the it will not cover the warranty any more. I can not see my phone as a dead brick any more. Any help please! Thanks in advance.
Click to expand...
Click to collapse
There isn't a definitive date set for the release of the specific files. I'm sure the devs will grab it the moment it's available and work their magic.
Be patient and check the forum daily/weekly. Alternatively you can take it to motorola and they may be able to fix it for a price, or just get a cheap and cheerful phone while you wait (I bought a cheap nokia)
But there are a lot of moto g users here also waiting for the devs to help us out - I miss my moto g

[Completed] Unbrick Moto G 1st gen

Hi guys, I'm kinda lost by now.
I tried to root my Moto G 1st Gen today, but whenever it was supposed to reboot again after to rooting process, I got the "dead" android with the no command warning. So I tried to some alternatives with the only result that my phone is now stuck in a bootloop. Luckily I can still access the bootloader menu, but when I try flash back to the firmware, I get the hab "check failed for boot" and recovery message, with the result that it doesn't work and I'm still in the same situation. I guess I have the wrong firmware but I can't seem to find the correct 1st gen xt1034 firmware for a german phone.
So yeah, if you could help me, that would be reaaaaally great, and if you need some additional information, I'll try my best to find it out.
Cheers
Hi,
you are sure you have an xt1034 german phone? From what I read, the xt1034 is special to America, so you should find your answer here. Good luck on reviving your phone!

My Moto G (XT1032) is dead after OTA update.....

I was facing problems like lags and battery/memory leaks since i got my MOTO G (XT1032) updated to 5.0.2. Then i received 5.1 but no improvement. Unfortunately, my device not going to receive 5.1.1, then i decided to downgrade it to 4.4.4. But again, my brother updated it with OTA 5.0.2 and while installation it went all black. Just LED blink while charging or using key combinations but not getting bootloader/fastboot. It is completely dead. MOTO Care say we need to change motherboard but it's not an hardware issue. So please, if someone know what is the actual issue, kindly help me.
warrior6124` said:
I was facing problems like lags and battery/memory leaks since i got my MOTO G (XT1032) updated to 5.0.2. Then i received 5.1 but no improvement. Unfortunately, my device not going to receive 5.1.1, then i decided to downgrade it to 4.4.4. But again, my brother updated it with OTA 5.0.2 and while installation it went all black. Just LED blink while charging or using key combinations but not getting bootloader/fastboot. It is completely dead. MOTO Care say we need to change motherboard but it's not an hardware issue. So please, if someone know what is the actual issue, kindly help me.
Click to expand...
Click to collapse
maybe because of bootloader..?
You flashed Bootloader repeatedly with different versions. OTA Updates also included Bootloader upgrade. You have hard-bricked your phone.
Motherboard does indeed need to be replaced, alternatively join all the other lost souls in this thread who have been waiting for almost a year for a fix:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798​
no fastbooty, no fixy
lost101 said:
You flashed Bootloader repeatedly with different versions. OTA Updates also included Bootloader upgrade. You have hard-bricked your phone.
Motherboard does indeed need to be replaced, alternatively join all the other lost souls in this thread who have been waiting for almost a year for a fix:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798​
Click to expand...
Click to collapse
1). What if I get it's "BOOT IC" (instead of whole motherboard) replaced for a new one ? Will it work?
2). And what does this mean "FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)" ?
warrior6124` said:
1). What if I get it's "BOOT IC" (instead of whole motherboard) replaced for a new one ? Will it work?
2). And what does this mean "FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)" ?
Click to expand...
Click to collapse
If no-one responds here, I suggest you ask your questions in the 'Hard-Brick' thread I linked to. Regarding, solution (1) - I've never heard it proposed before, but I'm no expert in this area.
Same problem((((
Moto G (XT1032/Falcon) - Unbrick
After a whole long disappointing year of trying hands on my Moto G to unbrick it, I found a thread to unbrick it and succesfully did it.
Here is the link to XDA thread which helped me recover my device : http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
If any of the Moto G user wants to recover his/her dead Moto G, he/she must visit the link given above.
I hope it will also work for you guys.
GOOD LUCK!!!

[Q]Moto Maxx (Moto Turbo XT1225 In India) keeps going to bootloader

I rooted my moto maxx(i live in india and its called moto turbo xt1225) last july, i just got the 6.0.1 ota update, while trying to install it, i first flashed stock 5.0.2 with rsd lite and then installed the update.
But afterwards when i installed the super su zip file v2.46(i didnt know at that time that you need v2.65+ for MM), my phone kept hanging up and wouldnt turn on.
So i restored a twrp backup from march but now everytime i reboot, the phone loads into the bootloader and so, offline charging is also not working. And rsd lite fails everytime at step 3(of 20).
Even installing a custom rom doesnt help.
Any help will really be appriciated plss.
Helpp
Someone plese help.

Cricket Wireless Motorola Moto G Pure (Ellis) XT2163-1 ?

I've searched on this forum and Google days for any development on rooting the Cricket Wireless Motorola Moto G Pure (Ellis) XT2163-1 . Found a few stuff for XT2163-4, which is also Moto G Pure Ellis but for different carriers. How safe is flashing the boot image for that? How would I first make a backup before trying and, if failing, trying my hand at building TWRP Ellis? I did pay an unofficial service just to have my phone unlocked, but I don't know how to get any further.
celzero said:
I've searched on this forum and Google days for any development on rooting the Cricket Wireless Motorola Moto G Pure (Ellis) XT2163-1 . Found a few stuff for XT2163-4, which is also Moto G Pure Ellis but for different carriers. How safe is flashing the boot image for that? How would I first make a backup before trying and, if failing, trying my hand at building TWRP Ellis? I did pay an unofficial service just to have my phone unlocked, but I don't know how to get any further.
Click to expand...
Click to collapse
Maybe you can follow this not sure if it would work but i tried this on my ellis xt2163-4 and it worked now am rooted.https://mobilewithdrivers.com/usb/magisk-root/motorola-moto-g-pure-xt2163-4
I just had one given toe and I've unlocked it through cricket but I have assurance wireless and I cannot get it to connect to savey life..
Any suggestions

Categories

Resources